[Creality Ender3 V2 BlTouch Installation] enderv v2 auto bed leveling installation #3d #printer #ender #v2 #bltouch

help.md

• Official firmware did not work at all.
• Format the sd card and install https://github.com/smith3d/Marlin/releases/tag/2.0.x.14 - https://github.com/smith3d/Marlin/releases/download/2.0.x.14/Smith3D-E3V2-2.0.x.14-5x5-SlowProbe.bin
• in Cura machine settings G29 ; worked
• M420 S1 Z2 failed and M420 S1 worked in cura machine settings
• Adjusted the z axis offset to -2.70 mm after doing the manual bed leveling. Z offset tuned using Z-offset Tool

Note

• try 5x5 fast firmware from smith3d

learning.md

• Wold3d PLA filament after 10 layer the model always comes out from the bed. Increased the hotend temperature from 200 to 210 C and bed temperature from 50 to 65C worked. Better bed temperature kept it sticking to the bed. When the bed temeprature was low the model base was cooling and became stiff and warping which leads the model to come out of the bed.
• Printing at slower speed at 50% it was working but it was slow. so whenever increased the speed it was knocking off from the bed.