Skip to content

Instantly share code, notes, and snippets.

@slimcdk

slimcdk/1637844789.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.4.2.log

Created November 25, 2021 12:55
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save slimcdk/e1a3337bc9efeacddc3959fd5725624d to your computer and use it in GitHub Desktop.
Save slimcdk/e1a3337bc9efeacddc3959fd5725624d to your computer and use it in GitHub Desktop.
Download ZIP
Raw
1637844789.toit-sim-4786.hardware_id-e1ddb74a-18cb-4b55-8fdf-f214061b6327.firmware-v1.4.2.log
$ toit serial reinstall --firmware v1.4.2 -p model.cellular.enabled=1 -p model.cellular.tx=5 -p model.cellular.rx=23 -p model.cellular.rts=19 -p model.cellular.cts=18 -p model.cellular.pwr=27 -p model.cellular.monarch=1 -p cellular.apn=internet --port=/dev/ttyUSB0
Detecting chip type. This can take up to 10s.
Reinstalling hardware with firmware: v1.4.2 (using model: esp32-4mb) on port /dev/ttyUSB0
Running "/home/christian/.cache/toit/tools/esptool_linux_v3.0 --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0xd000 /tmp/125603642/otadata041104721 0x10000 /tmp/125603642/ota_0768669308"
esptool.py v3.0
Serial port /dev/ttyUSB0
Connecting....
Chip is ESP32-D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 24:0a:c4:c7:26:10
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Auto-detected Flash size: 8MB
Compressed 8192 bytes to 31...
Writing at 0x0000d000... (100 %)
Wrote 8192 bytes (31 compressed) at 0x0000d000 in 0.0 seconds (effective 22904.6 kbit/s)...
Hash of data verified.
Compressed 1313936 bytes to 802034...
Writing at 0x00010000... (2 %)
Writing at 0x00014000... (4 %)
Writing at 0x00018000... (6 %)
Writing at 0x0001c000... (8 %)
Writing at 0x00020000... (10 %)
Writing at 0x00024000... (12 %)
Writing at 0x00028000... (14 %)
Writing at 0x0002c000... (16 %)
Writing at 0x00030000... (18 %)
Writing at 0x00034000... (20 %)
Writing at 0x00038000... (22 %)
Writing at 0x0003c000... (24 %)
Writing at 0x00040000... (26 %)
Writing at 0x00044000... (28 %)
Writing at 0x00048000... (30 %)
Writing at 0x0004c000... (32 %)
Writing at 0x00050000... (34 %)
Writing at 0x00054000... (36 %)
Writing at 0x00058000... (38 %)
Writing at 0x0005c000... (40 %)
Writing at 0x00060000... (42 %)
Writing at 0x00064000... (44 %)
Writing at 0x00068000... (46 %)
Writing at 0x0006c000... (48 %)
Writing at 0x00070000... (51 %)
Writing at 0x00074000... (53 %)
Writing at 0x00078000... (55 %)
Writing at 0x0007c000... (57 %)
Writing at 0x00080000... (59 %)
Writing at 0x00084000... (61 %)
Writing at 0x00088000... (63 %)
Writing at 0x0008c000... (65 %)
Writing at 0x00090000... (67 %)
Writing at 0x00094000... (69 %)
Writing at 0x00098000... (71 %)
Writing at 0x0009c000... (73 %)
Writing at 0x000a0000... (75 %)
Writing at 0x000a4000... (77 %)
Writing at 0x000a8000... (79 %)
Writing at 0x000ac000... (81 %)
Writing at 0x000b0000... (83 %)
Writing at 0x000b4000... (85 %)
Writing at 0x000b8000... (87 %)
Writing at 0x000bc000... (89 %)
Writing at 0x000c0000... (91 %)
Writing at 0x000c4000... (93 %)
Writing at 0x000c8000... (95 %)
Writing at 0x000cc000... (97 %)
Writing at 0x000d0000... (100 %)
Wrote 1313936 bytes (802034 compressed) at 0x00010000 in 13.2 seconds (effective 798.5 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
Hardware successfully reinstalled with the Toit firmware.
The hardware has been reinstalled with the following configurations:
+------------------------+----------------+
| SETTING | VALUE |
+------------------------+----------------+
| context | remote |
| model.cellular.rx | 23 |
| model | esp32-4mb |
| broker.cn | device.toit.io |
| broker.port | 9426 |
| model.cellular.pwr | 27 |
| model.cellular.monarch | 1 |
| cellular.apn | internet |
| model.cellular.tx | 5 |
| broker.host | device.toit.io |
| model.cellular.cts | 18 |
| model.cellular.enabled | 1 |
| model.cellular.rts | 19 |
+------------------------+----------------+
$ toit serial info --output table
+-------------------------------------------------------------------------+-----------+--------------------------------------+
| NAME | MODEL | HARDWARE ID |
+-------------------------------------------------------------------------+-----------+--------------------------------------+
| e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com | esp32-4mb | e1ddb74a-18cb-4b55-8fdf-f214061b6327 |
+-------------------------------------------------------------------------+-----------+--------------------------------------+
$ toit serial monitor
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
clearing RTC memory: RTC memory is in inconsistent state
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016182) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020929) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.555287) [toit.state] INFO: starting new session {session_id: 1, session_time: 0.562013}
(0.643924) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.746992) [toit.console_sync] INFO: loaded last console sync {time: null}
(0.758053) [toit.scheduler] INFO: running job {job: console_sync}
(0.760807) [toit.scheduler] INFO: running job {job: flush_metrics}
(0.762829) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.770296) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.777461) [toit.console] INFO: waiting for console connection to be established
(0.782153) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.789368) [toit.metrics] INFO: persisting metrics
(0.792722) [toit.metrics] INFO: flushing metrics
(1.131463) [toit] INFO: -> AT
(1.392820) [toit] INFO: -> AT
(1.653342) [toit] INFO: -> AT
(1.913957) [toit] INFO: -> AT
(2.174645) [toit] INFO: -> AT
(2.435285) [toit] INFO: -> AT
(2.696135) [toit] INFO: -> AT
(2.956714) [toit] INFO: -> AT
(3.218040) [toit] INFO: -> AT
(3.478653) [toit] INFO: -> AT
(3.739361) [toit] INFO: -> AT
(4.000001) [toit] INFO: -> AT
(4.260662) [toit] INFO: -> AT
(4.265622) [toit] INFO: <- OK
(4.369870) [toit] INFO: -> ATE0
(4.374127) [toit] INFO: <- OK
(4.396880) [toit] INFO: -> AT+CMEE=2
(4.401398) [toit] INFO: <- OK
(4.423454) [toit] INFO: -> AT+CFUN=4
(4.725239) [toit] INFO: <- OK
(4.747781) [toit] INFO: -> AT+CPIN?
(4.752200) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.809006) [toit] INFO: <- *ignored* [URC] +SYSSTART []
(5.006930) [toit] INFO: -> AT+CPIN?
(5.011520) [toit] INFO: <- +CME ERROR: SIM not inserted
(5.266083) [toit] INFO: -> AT+CPIN?
(5.270780) [toit] INFO: <- +CME ERROR: SIM not inserted
(5.525058) [toit] INFO: -> AT+CPIN?
(5.863441) [toit] INFO: <- +CPIN: <custom>
(5.866110) [toit] INFO: <- OK
(5.887716) [toit] INFO: -> AT+CGMM
(5.891527) [toit] INFO: <- FiPy
(5.894030) [toit] INFO: <- OK
(5.915677) [toit] INFO: -> AT+CGMR
(5.988502) [toit] INFO: <- UE5.0.0.0d
(5.991052) [toit] INFO: <- OK
(6.012961) [toit] INFO: -> AT+SQNCCID?
(6.018345) [toit] INFO: <- +SQNCCID: "89882390000069114786",""
(6.020663) [toit] INFO: <- OK
(6.023145) [toit.cellular] DEBUG: initialized {model: FiPy, version: UE5.0.0.0d, iccid: 89882390000069114786}
(6.042266) [toit] INFO: -> AT+CPIN?
(6.046926) [toit] INFO: <- +CPIN: <custom>
(6.049666) [toit] INFO: <- OK
(6.071404) [toit] INFO: -> AT+CPSMS=0
(6.121887) [toit] INFO: <- OK
(6.144675) [toit] INFO: -> AT+CEDRXS=0
(6.149447) [toit] INFO: <- OK
(6.172212) [toit] INFO: -> AT+SQNIBRCFG=0
(6.266596) [toit] INFO: <- OK
(6.289470) [toit] INFO: -> AT+SQNIPSCFG=1,100
(6.468587) [toit] INFO: <- OK
(6.490674) [toit] INFO: -> AT+SQNBANDSEL=0,"standard","20"
(6.495515) [toit] INFO: <- +CME ERROR: operation not supported
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode WyNVBVVYU1UGdjEuNC4yU1UJZXNwMzItNG1iWyRVI1UQAAAAAAAAAAAAAAAAAAAAAFsjVQRVRVNVCUVYQ0VQVElPTlNVJitDTUUgRVJST1I6IG9wZXJhdGlvbiBub3Qgc3VwcG9ydGVkIFtdWyNVAlVTWyNVKFsjVQNVRlUAbAABadNbI1UDVUZVAWwAAWsbWyNVA1VGVQJsAAFp8VsjVQNVRlUDbAABaW1bI1UDVUZVBGwAAgMcWyNVA1VGVQVsAAICtFsjVQNVRlUGbAACRERbI1UDVUZVB2wAAj/WWyNVA1VGVQhsAAI/+lsjVQNVRlUJbAACRFlbI1UDVUZVCmwAAgL/WyNVA1VGVQtsAAIdW1sjVQNVRlUMbAACKg9bI1UDVUZVGWwAAnrgWyNVA1VGVRpsAAKL1VsjVQNVRlUbbAACiGVbI1UDVUZVHEkjAlsjVQNVRlUdSSMXWyNVA1VGVR5JIpxbI1UDVUZVH2wAAoiiWyNVA1VGVSBsAAKIPlsjVQNVRlUhbAAA+gNbI1UDVUZVImwAAZLkWyNVA1VGVSNsAAELulsjVQNVRlUkbAABC9NbI1UDVUZVJWwAAQtQWyNVA1VGVSZJIwJbI1UDVUZVJ0kjF1sjVQNVRlUoSSL0WyNVA1VGVSlsAAELaVsjVQNVRlUqbAABC39bI1UDVUZVK0kwO1sjVQNVRlUsbAACKwRbI1UDVUZVLUkjAlsjVQNVRlUuSSMXWyNVA1VGVS9JIpxbI1UDVUZVMGwAAisZWyNVA1VGVTFsAAIrMFsjVQNVRlUySS/QWyNVA1VGVTNJMFQ=
(6.601417) [toit.network] DEBUG: error connecting {network: Cellular (internet), error: +CME ERROR: operation not supported []}
(6.608725) [toit.network] WARN: failed to connect to any network
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode WyNVBVVYU1UGdjEuNC4yU1UJZXNwMzItNG1iWyRVI1UQAAAAAAAAAAAAAAAAAAAAAFsjVQRVRVNVCUVYQ0VQVElPTlNVEUZBSUxFRCBUTyBDT05ORUNUWyNVAlVTWyNVG1sjVQNVRlUAbAACjH5bI1UDVUZVAWwAAovbWyNVA1VGVQJsAAKIZVsjVQNVRlUDSSMCWyNVA1VGVQRJIxdbI1UDVUZVBUkinFsjVQNVRlUGbAACiKJbI1UDVUZVB2wAAog+WyNVA1VGVQhsAAD6A1sjVQNVRlUJbAABkuRbI1UDVUZVCmwAAQu6WyNVA1VGVQtsAAEL01sjVQNVRlUMbAABC1BbI1UDVUZVDUkjAlsjVQNVRlUOSSMXWyNVA1VGVQ9JIvRbI1UDVUZVEGwAAQtpWyNVA1VGVRFsAAELf1sjVQNVRlUSSTA7WyNVA1VGVRNsAAIrBFsjVQNVRlUUSSMCWyNVA1VGVRVJIxdbI1UDVUZVFkkinFsjVQNVRlUXbAACKxlbI1UDVUZVGGwAAiswWyNVA1VGVRlJL9BbI1UDVUZVGkkwVA==
(6.700762) [toit] INFO: -> AT+CFUN=0
(6.706527) [toit.scheduler] INFO: changing run level {run_level: 0}
(6.710063) [toit.scheduler] INFO: going into deep sleep {ms: 4988}
(6.712023) [toit.metrics] INFO: persisting metrics
(7.307204) [toit] INFO: <- OK
(7.414834) [toit] INFO: entering deep sleep {ms: 4988}
Entering deep sleep for 4988ms
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016185) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020932) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.038687) [toit.state] INFO: resumed session {session_id: 1, session_time: 12.518145}
(0.052973) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.089099) [toit.console_sync] INFO: loaded last console sync {time: 6.694782}
(0.104314) [toit.scheduler] INFO: running job {job: console_sync}
(0.107183) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.109271) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.120242) [toit.console] INFO: waiting for console connection to be established
(0.122744) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.163450) [toit] INFO: -> AT
(0.424800) [toit] INFO: -> AT
(0.685333) [toit] INFO: -> AT
(0.945950) [toit] INFO: -> AT
(1.206887) [toit] INFO: -> AT
(1.467909) [toit] INFO: -> AT
(1.728572) [toit] INFO: -> AT
(1.989193) [toit] INFO: -> AT
(2.249883) [toit] INFO: -> AT
(2.510564) [toit] INFO: -> AT
(2.771251) [toit] INFO: -> AT
(3.031938) [toit] INFO: -> AT
(3.292555) [toit] INFO: -> AT
(3.553227) [toit] INFO: -> AT
(3.558226) [toit] INFO: <- OK
(3.662650) [toit] INFO: -> ATE0
(3.666920) [toit] INFO: <- OK
(3.689681) [toit] INFO: -> AT+CMEE=2
(3.693803) [toit] INFO: <- OK
(3.715711) [toit] INFO: -> AT+CFUN=4
(4.015844) [toit] INFO: <- OK
(4.038425) [toit] INFO: -> AT+CPIN?
(4.042770) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.072924) [toit] INFO: <- *ignored* [URC] +SYSSTART []
(4.300650) [toit] INFO: -> AT+CPIN?
(4.305110) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.559546) [toit] INFO: -> AT+CPIN?
(4.564233) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.818607) [toit] INFO: -> AT+CPIN?
(5.160044) [toit] INFO: <- +CPIN: <custom>
(5.162689) [toit] INFO: <- OK
(5.184129) [toit] INFO: -> AT+CGMM
(5.188470) [toit] INFO: <- FiPy
(5.191370) [toit] INFO: <- OK
(5.213008) [toit] INFO: -> AT+CGMR
(5.285544) [toit] INFO: <- UE5.0.0.0d
(5.288130) [toit] INFO: <- OK
(5.310231) [toit] INFO: -> AT+SQNCCID?
(5.314962) [toit] INFO: <- +SQNCCID: "89882390000069114786",""
(5.317230) [toit] INFO: <- OK
(5.319810) [toit.cellular] DEBUG: initialized {model: FiPy, version: UE5.0.0.0d, iccid: 89882390000069114786}
(5.339529) [toit] INFO: -> AT+CPIN?
(5.344159) [toit] INFO: <- +CPIN: <custom>
(5.346888) [toit] INFO: <- OK
(5.368612) [toit] INFO: -> AT+CPSMS=0
(5.419375) [toit] INFO: <- OK
(5.442060) [toit] INFO: -> AT+CEDRXS=0
(5.446471) [toit] INFO: <- OK
(5.469157) [toit] INFO: -> AT+SQNIBRCFG=0
(5.563610) [toit] INFO: <- OK
(5.586644) [toit] INFO: -> AT+SQNIPSCFG=1,100
(5.765776) [toit] INFO: <- OK
(5.788189) [toit] INFO: -> AT+SQNBANDSEL=0,"standard","20"
(5.793287) [toit] INFO: <- +CME ERROR: operation not supported
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(5.906064) [toit.network] DEBUG: error connecting {network: Cellular (internet), error: +CME ERROR: operation not supported []}
(5.914318) [toit.network] WARN: failed to connect to any network
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(6.010166) [toit] INFO: -> AT+CFUN=0
(6.016171) [toit.scheduler] INFO: changing run level {run_level: 0}
(6.019724) [toit.scheduler] INFO: going into deep sleep {ms: 4988}
(6.021698) [toit.metrics] INFO: persisting metrics
(6.624507) [toit] INFO: <- OK
(6.732067) [toit] INFO: entering deep sleep {ms: 4988}
Entering deep sleep for 4988ms
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016184) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020931) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.038740) [toit.state] INFO: resumed session {session_id: 1, session_time: 24.301513}
(0.053046) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.089192) [toit.console_sync] INFO: loaded last console sync {time: 18.471034}
(0.104591) [toit.scheduler] INFO: running job {job: console_sync}
(0.107471) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.111951) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.118225) [toit.console] INFO: waiting for console connection to be established
(0.122839) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.164803) [toit] INFO: -> AT
(0.426151) [toit] INFO: -> AT
(0.686680) [toit] INFO: -> AT
(0.947906) [toit] INFO: -> AT
(1.216706) [toit] INFO: -> AT
(1.477906) [toit] INFO: -> AT
(1.738570) [toit] INFO: -> AT
(1.999232) [toit] INFO: -> AT
(2.259905) [toit] INFO: -> AT
(2.520568) [toit] INFO: -> AT
(2.781244) [toit] INFO: -> AT
(3.041924) [toit] INFO: -> AT
(3.302562) [toit] INFO: -> AT
(3.563222) [toit] INFO: -> AT
(3.568037) [toit] INFO: <- OK
(3.672288) [toit] INFO: -> ATE0
(3.676546) [toit] INFO: <- OK
(3.699237) [toit] INFO: -> AT+CMEE=2
(3.706590) [toit] INFO: <- OK
(3.728593) [toit] INFO: -> AT+CFUN=4
(4.022028) [toit] INFO: <- OK
(4.044624) [toit] INFO: -> AT+CPIN?
(4.048862) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.100253) [toit] INFO: <- *ignored* [URC] +SYSSTART []
(4.303639) [toit] INFO: -> AT+CPIN?
(4.308046) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.562448) [toit] INFO: -> AT+CPIN?
(4.575165) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.829657) [toit] INFO: -> AT+CPIN?
(5.173423) [toit] INFO: <- +CPIN: <custom>
(5.176128) [toit] INFO: <- OK
(5.197778) [toit] INFO: -> AT+CGMM
(5.202103) [toit] INFO: <- FiPy
(5.204665) [toit] INFO: <- OK
(5.226359) [toit] INFO: -> AT+CGMR
(5.299022) [toit] INFO: <- UE5.0.0.0d
(5.301603) [toit] INFO: <- OK
(5.323474) [toit] INFO: -> AT+SQNCCID?
(5.328911) [toit] INFO: <- +SQNCCID: "89882390000069114786",""
(5.331310) [toit] INFO: <- OK
(5.333896) [toit.cellular] DEBUG: initialized {model: FiPy, version: UE5.0.0.0d, iccid: 89882390000069114786}
(5.353768) [toit] INFO: -> AT+CPIN?
(5.358325) [toit] INFO: <- +CPIN: <custom>
(5.361082) [toit] INFO: <- OK
(5.382790) [toit] INFO: -> AT+CPSMS=0
(5.433344) [toit] INFO: <- OK
(5.455923) [toit] INFO: -> AT+CEDRXS=0
(5.460321) [toit] INFO: <- OK
(5.482857) [toit] INFO: -> AT+SQNIBRCFG=0
(5.577488) [toit] INFO: <- OK
(5.600411) [toit] INFO: -> AT+SQNIPSCFG=1,100
(6.042710) [toit] INFO: <- OK
(6.064947) [toit] INFO: -> AT+SQNBANDSEL=0,"standard","20"
(6.069806) [toit] INFO: <- +CME ERROR: operation not supported
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(6.173368) [toit.network] DEBUG: error connecting {network: Cellular (internet), error: +CME ERROR: operation not supported []}
(6.181404) [toit.network] WARN: failed to connect to any network
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode WyNVBVVYU1UGdjEuNC4yU1UJZXNwMzItNG1iWyRVI1UQAAAAAAAAAAAAAAAAAAAAAFsjVQRVRVNVCUVYQ0VQVElPTlNVEUZBSUxFRCBUTyBDT05ORUNUWyNVAlVTWyNVG1sjVQNVRlUAbAACjH5bI1UDVUZVAWwAAovbWyNVA1VGVQJsAAKIZVsjVQNVRlUDSSMCWyNVA1VGVQRJIxdbI1UDVUZVBUkinFsjVQNVRlUGbAACiKJbI1UDVUZVB2wAAog+WyNVA1VGVQhsAAD6A1sjVQNVRlUJbAABkuRbI1UDVUZVCmwAAQu6WyNVA1VGVQtsAAEL01sjVQNVRlUMbAABC1BbI1UDVUZVDUkjAlsjVQNVRlUOSSMXWyNVA1VGVQ9JIvRbI1UDVUZVEGwAAQtpWyNVA1VGVRFsAAELf1sjVQNVRlUSSTA7WyNVA1VGVRNsAAIrBFsjVQNVRlUUSSMCWyNVA1VGVRVJIxdbI1UDVUZVFkkinFsjVQNVRlUXbAACKxlbI1UDVUZVGGwAAiswWyNVA1VGVRlJL9BbI1UDVUZVGkkwVA==
(6.270715) [toit] INFO: -> AT+CFUN=0
(6.276404) [toit.scheduler] INFO: changing run level {run_level: 0}
(6.279924) [toit.scheduler] INFO: going into deep sleep {ms: 4988}
(6.281880) [toit.metrics] INFO: persisting metrics
(6.630414) [toit] INFO: <- OK
(6.738150) [toit] INFO: entering deep sleep {ms: 4988}
Entering deep sleep for 4988ms
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016184) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020931) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.038791) [toit.state] INFO: resumed session {session_id: 1, session_time: 36.091216}
(0.053100) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.089308) [toit.console_sync] INFO: loaded last console sync {time: 30.514629}
(0.104886) [toit.scheduler] INFO: running job {job: console_sync}
(0.107758) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.112221) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.118501) [toit.console] INFO: waiting for console connection to be established
(0.123123) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.166218) [toit] INFO: -> AT
(0.427996) [toit] INFO: -> AT
(0.688528) [toit] INFO: -> AT
(0.949142) [toit] INFO: -> AT
(1.216690) [toit] INFO: -> AT
(1.477908) [toit] INFO: -> AT
(1.738571) [toit] INFO: -> AT
(1.999234) [toit] INFO: -> AT
(2.259907) [toit] INFO: -> AT
(2.520570) [toit] INFO: -> AT
(2.781246) [toit] INFO: -> AT
(3.041924) [toit] INFO: -> AT
(3.302563) [toit] INFO: -> AT
(3.563222) [toit] INFO: -> AT
(3.568044) [toit] INFO: <- OK
(3.672413) [toit] INFO: -> ATE0
(3.676701) [toit] INFO: <- OK
(3.699499) [toit] INFO: -> AT+CMEE=2
(3.703872) [toit] INFO: <- OK
(3.725998) [toit] INFO: -> AT+CFUN=4
(4.021127) [toit] INFO: <- OK
(4.042849) [toit] INFO: -> AT+CPIN?
(4.046976) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.096431) [toit] INFO: <- *ignored* [URC] +SYSSTART []
(4.301671) [toit] INFO: -> AT+CPIN?
(4.306394) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.560944) [toit] INFO: -> AT+CPIN?
(4.571625) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.826177) [toit] INFO: -> AT+CPIN?
(5.169923) [toit] INFO: <- +CPIN: <custom>
(5.172674) [toit] INFO: <- OK
(5.195055) [toit] INFO: -> AT+CGMM
(5.199085) [toit] INFO: <- FiPy
(5.201830) [toit] INFO: <- OK
(5.223380) [toit] INFO: -> AT+CGMR
(5.295921) [toit] INFO: <- UE5.0.0.0d
(5.298486) [toit] INFO: <- OK
(5.320286) [toit] INFO: -> AT+SQNCCID?
(5.325628) [toit] INFO: <- +SQNCCID: "89882390000069114786",""
(5.328031) [toit] INFO: <- OK
(5.330566) [toit.cellular] DEBUG: initialized {model: FiPy, version: UE5.0.0.0d, iccid: 89882390000069114786}
(5.349722) [toit] INFO: -> AT+CPIN?
(5.354351) [toit] INFO: <- +CPIN: <custom>
(5.357085) [toit] INFO: <- OK
(5.378864) [toit] INFO: -> AT+CPSMS=0
(5.429571) [toit] INFO: <- OK
(5.452218) [toit] INFO: -> AT+CEDRXS=0
(5.456689) [toit] INFO: <- OK
(5.479295) [toit] INFO: -> AT+SQNIBRCFG=0
(5.573949) [toit] INFO: <- OK
(5.596860) [toit] INFO: -> AT+SQNIPSCFG=1,100
(6.031185) [toit] INFO: <- OK
(6.053401) [toit] INFO: -> AT+SQNBANDSEL=0,"standard","20"
(6.058177) [toit] INFO: <- +CME ERROR: operation not supported
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode WyNVBVVYU1UGdjEuNC4yU1UJZXNwMzItNG1iWyRVI1UQAAAAAAAAAAAAAAAAAAAAAFsjVQRVRVNVCUVYQ0VQVElPTlNVJitDTUUgRVJST1I6IG9wZXJhdGlvbiBub3Qgc3VwcG9ydGVkIFtdWyNVAlVTWyNVKFsjVQNVRlUAbAABadNbI1UDVUZVAWwAAWsbWyNVA1VGVQJsAAFp8VsjVQNVRlUDbAABaW1bI1UDVUZVBGwAAgMcWyNVA1VGVQVsAAICtFsjVQNVRlUGbAACRERbI1UDVUZVB2wAAj/WWyNVA1VGVQhsAAI/+lsjVQNVRlUJbAACRFlbI1UDVUZVCmwAAgL/WyNVA1VGVQtsAAIdW1sjVQNVRlUMbAACKg9bI1UDVUZVGWwAAnrgWyNVA1VGVRpsAAKL1VsjVQNVRlUbbAACiGVbI1UDVUZVHEkjAlsjVQNVRlUdSSMXWyNVA1VGVR5JIpxbI1UDVUZVH2wAAoiiWyNVA1VGVSBsAAKIPlsjVQNVRlUhbAAA+gNbI1UDVUZVImwAAZLkWyNVA1VGVSNsAAELulsjVQNVRlUkbAABC9NbI1UDVUZVJWwAAQtQWyNVA1VGVSZJIwJbI1UDVUZVJ0kjF1sjVQNVRlUoSSL0WyNVA1VGVSlsAAELaVsjVQNVRlUqbAABC39bI1UDVUZVK0kwO1sjVQNVRlUsbAACKwRbI1UDVUZVLUkjAlsjVQNVRlUuSSMXWyNVA1VGVS9JIpxbI1UDVUZVMGwAAisZWyNVA1VGVTFsAAIrMFsjVQNVRlUySS/QWyNVA1VGVTNJMFQ=
(6.234808) [toit.network] DEBUG: error connecting {network: Cellular (internet), error: +CME ERROR: operation not supported []}
(6.243341) [toit.network] WARN: failed to connect to any network
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(6.340189) [toit] INFO: -> AT+CFUN=0
(6.345924) [toit.scheduler] INFO: changing run level {run_level: 0}
(6.349547) [toit.scheduler] INFO: going into deep sleep {ms: 4988}
(6.351503) [toit.metrics] INFO: persisting metrics
(6.616605) [toit] INFO: <- OK
(6.724413) [toit] INFO: entering deep sleep {ms: 4988}
Entering deep sleep for 4988ms
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016184) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020931) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.038986) [toit.state] INFO: resumed session {session_id: 1, session_time: 47.868136}
(0.053333) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.089385) [toit.console_sync] INFO: loaded last console sync {time: 42.374110}
(0.105115) [toit.scheduler] INFO: running job {job: console_sync}
(0.110378) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.112715) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.118722) [toit.console] INFO: waiting for console connection to be established
(0.123358) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.167648) [toit] INFO: -> AT
(0.428979) [toit] INFO: -> AT
(0.689510) [toit] INFO: -> AT
(0.950125) [toit] INFO: -> AT
(1.216701) [toit] INFO: -> AT
(1.477910) [toit] INFO: -> AT
(1.738625) [toit] INFO: -> AT
(1.999259) [toit] INFO: -> AT
(2.259927) [toit] INFO: -> AT
(2.520590) [toit] INFO: -> AT
(2.781254) [toit] INFO: -> AT
(3.041936) [toit] INFO: -> AT
(3.302571) [toit] INFO: -> AT
(3.307603) [toit] INFO: <- OK
(3.411863) [toit] INFO: -> ATE0
(3.416052) [toit] INFO: <- OK
(3.438808) [toit] INFO: -> AT+CMEE=2
(3.443782) [toit] INFO: <- OK
(3.465662) [toit] INFO: -> AT+CFUN=4
(3.759510) [toit] INFO: <- OK
(3.782032) [toit] INFO: -> AT+CPIN?
(3.786661) [toit] INFO: <- +CME ERROR: SIM not inserted
(3.796632) [toit] INFO: <- *ignored* [URC] +SYSSTART []
(4.041437) [toit] INFO: -> AT+CPIN?
(4.045893) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.300345) [toit] INFO: -> AT+CPIN?
(4.305097) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.559614) [toit] INFO: -> AT+CPIN?
(4.901027) [toit] INFO: <- +CPIN: <custom>
(4.903706) [toit] INFO: <- OK
(4.925212) [toit] INFO: -> AT+CGMM
(4.929054) [toit] INFO: <- FiPy
(4.931569) [toit] INFO: <- OK
(4.953067) [toit] INFO: -> AT+CGMR
(5.025839) [toit] INFO: <- UE5.0.0.0d
(5.028406) [toit] INFO: <- OK
(5.050439) [toit] INFO: -> AT+SQNCCID?
(5.055741) [toit] INFO: <- +SQNCCID: "89882390000069114786",""
(5.058062) [toit] INFO: <- OK
(5.060784) [toit.cellular] DEBUG: initialized {model: FiPy, version: UE5.0.0.0d, iccid: 89882390000069114786}
(5.079628) [toit] INFO: -> AT+CPIN?
(5.084299) [toit] INFO: <- +CPIN: <custom>
(5.087024) [toit] INFO: <- OK
(5.109032) [toit] INFO: -> AT+CPSMS=0
(5.159455) [toit] INFO: <- OK
(5.182219) [toit] INFO: -> AT+CEDRXS=0
(5.186841) [toit] INFO: <- OK
(5.209639) [toit] INFO: -> AT+SQNIBRCFG=0
(5.304265) [toit] INFO: <- OK
(5.328119) [toit] INFO: -> AT+SQNIPSCFG=1,100
(5.514443) [toit] INFO: <- OK
(5.536636) [toit] INFO: -> AT+SQNBANDSEL=0,"standard","20"
(5.541428) [toit] INFO: <- +CME ERROR: operation not supported
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode WyNVBVVYU1UGdjEuNC4yU1UJZXNwMzItNG1iWyRVI1UQAAAAAAAAAAAAAAAAAAAAAFsjVQRVRVNVCUVYQ0VQVElPTlNVJitDTUUgRVJST1I6IG9wZXJhdGlvbiBub3Qgc3VwcG9ydGVkIFtdWyNVAlVTWyNVKFsjVQNVRlUAbAABadNbI1UDVUZVAWwAAWsbWyNVA1VGVQJsAAFp8VsjVQNVRlUDbAABaW1bI1UDVUZVBGwAAgMcWyNVA1VGVQVsAAICtFsjVQNVRlUGbAACRERbI1UDVUZVB2wAAj/WWyNVA1VGVQhsAAI/+lsjVQNVRlUJbAACRFlbI1UDVUZVCmwAAgL/WyNVA1VGVQtsAAIdW1sjVQNVRlUMbAACKg9bI1UDVUZVGWwAAnrgWyNVA1VGVRpsAAKL1VsjVQNVRlUbbAACiGVbI1UDVUZVHEkjAlsjVQNVRlUdSSMXWyNVA1VGVR5JIpxbI1UDVUZVH2wAAoiiWyNVA1VGVSBsAAKIPlsjVQNVRlUhbAAA+gNbI1UDVUZVImwAAZLkWyNVA1VGVSNsAAELulsjVQNVRlUkbAABC9NbI1UDVUZVJWwAAQtQWyNVA1VGVSZJIwJbI1UDVUZVJ0kjF1sjVQNVRlUoSSL0WyNVA1VGVSlsAAELaVsjVQNVRlUqbAABC39bI1UDVUZVK0kwO1sjVQNVRlUsbAACKwRbI1UDVUZVLUkjAlsjVQNVRlUuSSMXWyNVA1VGVS9JIpxbI1UDVUZVMGwAAisZWyNVA1VGVTFsAAIrMFsjVQNVRlUySS/QWyNVA1VGVTNJMFQ=
(5.643951) [toit.network] DEBUG: error connecting {network: Cellular (internet), error: +CME ERROR: operation not supported []}
(5.652709) [toit.network] WARN: failed to connect to any network
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(5.750426) [toit] INFO: -> AT+CFUN=0
(5.756116) [toit.scheduler] INFO: changing run level {run_level: 0}
(5.762839) [toit.scheduler] INFO: going into deep sleep {ms: 4988}
(5.764904) [toit.metrics] INFO: persisting metrics
(6.385174) [toit] INFO: <- OK
(6.492805) [toit] INFO: entering deep sleep {ms: 4988}
Entering deep sleep for 4988ms
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016185) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020932) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.039043) [toit.state] INFO: resumed session {session_id: 1, session_time: 59.411368}
(0.053441) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.089485) [toit.console_sync] INFO: loaded last console sync {time: 53.560247}
(0.105335) [toit.scheduler] INFO: running job {job: console_sync}
(0.110671) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.112861) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.121360) [toit.console] INFO: waiting for console connection to be established
(0.126052) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.171338) [toit] INFO: -> AT
(0.432678) [toit] INFO: -> AT
(0.693208) [toit] INFO: -> AT
(0.953832) [toit] INFO: -> AT
(1.216691) [toit] INFO: -> AT
(1.477908) [toit] INFO: -> AT
(1.738628) [toit] INFO: -> AT
(1.999261) [toit] INFO: -> AT
(2.259929) [toit] INFO: -> AT
(2.520592) [toit] INFO: -> AT
(2.781256) [toit] INFO: -> AT
(3.041938) [toit] INFO: -> AT
(3.302565) [toit] INFO: -> AT
(3.563219) [toit] INFO: -> AT
(3.568217) [toit] INFO: <- OK
(3.672475) [toit] INFO: -> ATE0
(3.676729) [toit] INFO: <- OK
(3.699506) [toit] INFO: -> AT+CMEE=2
(3.703726) [toit] INFO: <- OK
(3.725676) [toit] INFO: -> AT+CFUN=4
(4.019588) [toit] INFO: <- OK
(4.042166) [toit] INFO: -> AT+CPIN?
(4.046531) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.084480) [toit] INFO: <- *ignored* [URC] +SYSSTART []
(4.301219) [toit] INFO: -> AT+CPIN?
(4.305547) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.560008) [toit] INFO: -> AT+CPIN?
(4.574198) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.828664) [toit] INFO: -> AT+CPIN?
(5.175726) [toit] INFO: <- +CPIN: <custom>
(5.178109) [toit] INFO: <- OK
(5.200067) [toit] INFO: -> AT+CGMM
(5.204208) [toit] INFO: <- FiPy
(5.206900) [toit] INFO: <- OK
(5.228474) [toit] INFO: -> AT+CGMR
(5.300890) [toit] INFO: <- UE5.0.0.0d
(5.303432) [toit] INFO: <- OK
(5.325201) [toit] INFO: -> AT+SQNCCID?
(5.330762) [toit] INFO: <- +SQNCCID: "89882390000069114786",""
(5.333289) [toit] INFO: <- OK
(5.335824) [toit.cellular] DEBUG: initialized {model: FiPy, version: UE5.0.0.0d, iccid: 89882390000069114786}
(5.355366) [toit] INFO: -> AT+CPIN?
(5.360116) [toit] INFO: <- +CPIN: <custom>
(5.362789) [toit] INFO: <- OK
(5.384564) [toit] INFO: -> AT+CPSMS=0
(5.439121) [toit] INFO: <- OK
(5.461867) [toit] INFO: -> AT+CEDRXS=0
(5.466228) [toit] INFO: <- OK
(5.488961) [toit] INFO: -> AT+SQNIBRCFG=0
(5.583615) [toit] INFO: <- OK
(5.606515) [toit] INFO: -> AT+SQNIPSCFG=1,100
(6.103637) [toit] INFO: <- OK
(6.125846) [toit] INFO: -> AT+SQNBANDSEL=0,"standard","20"
(6.130833) [toit] INFO: <- +CME ERROR: operation not supported
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(6.243868) [toit.network] DEBUG: error connecting {network: Cellular (internet), error: +CME ERROR: operation not supported []}
(6.252850) [toit.network] WARN: failed to connect to any network
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(6.349631) [toit] INFO: -> AT+CFUN=0
(6.355374) [toit.scheduler] INFO: changing run level {run_level: 0}
(6.362228) [toit.scheduler] INFO: going into deep sleep {ms: 4988}
(6.364294) [toit.metrics] INFO: persisting metrics
(6.731725) [toit] INFO: <- OK
(6.839531) [toit] INFO: entering deep sleep {ms: 4988}
Entering deep sleep for 4988ms
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016184) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020931) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.039092) [toit.state] INFO: resumed session {session_id: 1, session_time: 71.303390}
(0.053531) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.089578) [toit.console_sync] INFO: loaded last console sync {time: 65.703762}
(0.110934) [toit.scheduler] INFO: running job {job: console_sync}
(0.113787) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.115867) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.124506) [toit.console] INFO: waiting for console connection to be established
(0.129180) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.175535) [toit] INFO: -> AT
(0.436885) [toit] INFO: -> AT
(0.698015) [toit] INFO: -> AT
(0.958629) [toit] INFO: -> AT
(1.219369) [toit] INFO: -> AT
(1.479986) [toit] INFO: -> AT
(1.740698) [toit] INFO: -> AT
(2.001326) [toit] INFO: -> AT
(2.261999) [toit] INFO: -> AT
(2.522664) [toit] INFO: -> AT
(2.783329) [toit] INFO: -> AT
(3.044012) [toit] INFO: -> AT
(3.304647) [toit] INFO: -> AT
(3.309624) [toit] INFO: <- OK
(3.413887) [toit] INFO: -> ATE0
(3.418266) [toit] INFO: <- OK
(3.441019) [toit] INFO: -> AT+CMEE=2
(3.445094) [toit] INFO: <- OK
(3.467837) [toit] INFO: -> AT+CFUN=4
(3.761273) [toit] INFO: <- OK
(3.783792) [toit] INFO: -> AT+CPIN?
(3.788126) [toit] INFO: <- +CME ERROR: SIM not inserted
(3.840643) [toit] INFO: <- *ignored* [URC] +SYSSTART []
(4.042948) [toit] INFO: -> AT+CPIN?
(4.047361) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.301799) [toit] INFO: -> AT+CPIN?
(4.311485) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.566074) [toit] INFO: -> AT+CPIN?
(4.910124) [toit] INFO: <- +CPIN: <custom>
(4.912773) [toit] INFO: <- OK
(4.934246) [toit] INFO: -> AT+CGMM
(4.938066) [toit] INFO: <- FiPy
(4.940573) [toit] INFO: <- OK
(4.962071) [toit] INFO: -> AT+CGMR
(5.034903) [toit] INFO: <- UE5.0.0.0d
(5.037459) [toit] INFO: <- OK
(5.059497) [toit] INFO: -> AT+SQNCCID?
(5.064818) [toit] INFO: <- +SQNCCID: "89882390000069114786",""
(5.067143) [toit] INFO: <- OK
(5.069845) [toit.cellular] DEBUG: initialized {model: FiPy, version: UE5.0.0.0d, iccid: 89882390000069114786}
(5.089703) [toit] INFO: -> AT+CPIN?
(5.094419) [toit] INFO: <- +CPIN: <custom>
(5.105771) [toit] INFO: <- OK
(5.127974) [toit] INFO: -> AT+CPSMS=0
(5.181341) [toit] INFO: <- OK
(5.206875) [toit] INFO: -> AT+CEDRXS=0
(5.211350) [toit] INFO: <- OK
(5.234043) [toit] INFO: -> AT+SQNIBRCFG=0
(5.327136) [toit] INFO: <- OK
(5.350127) [toit] INFO: -> AT+SQNIPSCFG=1,100
(5.840059) [toit] INFO: <- OK
(5.862383) [toit] INFO: -> AT+SQNBANDSEL=0,"standard","20"
(5.867493) [toit] INFO: <- +CME ERROR: operation not supported
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(5.986239) [toit.network] DEBUG: error connecting {network: Cellular (internet), error: +CME ERROR: operation not supported []}
(5.995479) [toit.network] WARN: failed to connect to any network
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(6.092484) [toit] INFO: -> AT+CFUN=0
(6.098388) [toit.scheduler] INFO: changing run level {run_level: 0}
(6.101960) [toit.scheduler] INFO: going into deep sleep {ms: 4986}
(6.103957) [toit.metrics] INFO: persisting metrics
(6.423526) [toit] INFO: <- OK
(6.531163) [toit] INFO: entering deep sleep {ms: 4986}
Entering deep sleep for 4986ms
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016185) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020932) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.039354) [toit.state] INFO: resumed session {session_id: 1, session_time: 82.885681}
(0.053863) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.089669) [toit.console_sync] INFO: loaded last console sync {time: 77.336965}
(0.108384) [toit.scheduler] INFO: running job {job: console_sync}
(0.111230) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.113309) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.122113) [toit.console] INFO: waiting for console connection to be established
(0.126622) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.174243) [toit] INFO: -> AT
(0.435677) [toit] INFO: -> AT
(0.696160) [toit] INFO: -> AT
(0.957920) [toit] INFO: -> AT
(1.218471) [toit] INFO: -> AT
(1.479085) [toit] INFO: -> AT
(1.739753) [toit] INFO: -> AT
(2.000412) [toit] INFO: -> AT
(2.261085) [toit] INFO: -> AT
(2.521749) [toit] INFO: -> AT
(2.782422) [toit] INFO: -> AT
(3.043106) [toit] INFO: -> AT
(3.303745) [toit] INFO: -> AT
(3.308718) [toit] INFO: <- OK
(3.413151) [toit] INFO: -> ATE0
(3.417409) [toit] INFO: <- OK
(3.440159) [toit] INFO: -> AT+CMEE=2
(3.444128) [toit] INFO: <- OK
(3.466013) [toit] INFO: -> AT+CFUN=4
(3.962412) [toit] INFO: <- OK
(3.984944) [toit] INFO: -> AT+CPIN?
(3.989252) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.062207) [toit] INFO: <- *ignored* [URC] +SYSSTART []
(4.244051) [toit] INFO: -> AT+CPIN?
(4.248444) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.502886) [toit] INFO: -> AT+CPIN?
(4.516976) [toit] INFO: <- +CME ERROR: SIM not inserted
(4.771251) [toit] INFO: -> AT+CPIN?
(5.116742) [toit] INFO: <- +CPIN: <custom>
(5.119393) [toit] INFO: <- OK
(5.141112) [toit] INFO: -> AT+CGMM
(5.145192) [toit] INFO: <- FiPy
(5.147714) [toit] INFO: <- OK
(5.169240) [toit] INFO: -> AT+CGMR
(5.242091) [toit] INFO: <- UE5.0.0.0d
(5.244767) [toit] INFO: <- OK
(5.267774) [toit] INFO: -> AT+SQNCCID?
(5.273113) [toit] INFO: <- +SQNCCID: "89882390000069114786",""
(5.275352) [toit] INFO: <- OK
(5.277866) [toit.cellular] DEBUG: initialized {model: FiPy, version: UE5.0.0.0d, iccid: 89882390000069114786}
(5.306462) [toit] INFO: -> AT+CPIN?
(5.311283) [toit] INFO: <- +CPIN: <custom>
(5.314019) [toit] INFO: <- OK
(5.335740) [toit] INFO: -> AT+CPSMS=0
(5.387785) [toit] INFO: <- OK
(5.410381) [toit] INFO: -> AT+CEDRXS=0
(5.414717) [toit] INFO: <- OK
(5.437817) [toit] INFO: -> AT+SQNIBRCFG=0
(5.532278) [toit] INFO: <- OK
(5.555212) [toit] INFO: -> AT+SQNIPSCFG=1,100
(6.162582) [toit] INFO: <- OK
(6.184830) [toit] INFO: -> AT+SQNBANDSEL=0,"standard","20"
(6.189748) [toit] INFO: <- +CME ERROR: operation not supported
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(6.294867) [toit.network] DEBUG: error connecting {network: Cellular (internet), error: +CME ERROR: operation not supported []}
(6.304568) [toit.network] WARN: failed to connect to any network
----
Received a Toit system message but unable to send it to the Toit console for decoding.
Executing the command below will make it human readable:
----
toit serial decode 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
(6.406755) [toit] INFO: -> AT+CFUN=0
(6.412508) [toit.scheduler] INFO: changing run level {run_level: 0}
(6.416032) [toit.scheduler] INFO: going into deep sleep {ms: 4982}
(6.418016) [toit.metrics] INFO: persisting metrics
(7.312893) [toit] INFO: <- OK
(7.420526) [toit] INFO: entering deep sleep {ms: 4982}
Entering deep sleep for 4982ms
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:188
ho 0 tail 12 room 4
load:0x40078000,len:12180
load:0x40080400,len:2944
entry 0x400805c8
[flash reg] address 0x3f46c000, size 0x00134000
[IDENTITY] name=e1ddb74a-18cb-4b55-8fdf-f214061b6327.457.2021-09-26.device.toitware.com,model=esp32-4mb
(0.016185) [toit] INFO: booting toit {sdk: v1.4.2, model: esp32-4mb}
(0.020932) [toit.scheduler] INFO: set initial run_level {run_level: 4}
(0.039402) [toit.state] INFO: resumed session {session_id: 1, session_time: 95.348469}
(0.053995) [toit.kernel] INFO: using model parameters {cellular.cts: 18, cellular.enabled: 1, cellular.monarch: 1, cellular.pwr: 27, cellular.rts: 19, cellular.rx: 23, cellular.tx: 5}
(0.089761) [toit.console_sync] INFO: loaded last console sync {time: 89.225855}
(0.114627) [toit.scheduler] INFO: running job {job: console_sync}
(0.117754) [toit.scheduler] INFO: running job {job: poll_metric_flash_usage}
(0.119892) [toit.scheduler] INFO: running job {job: poll_metric_memory_profile}
(0.128196) [toit.console] INFO: waiting for console connection to be established
(0.132881) [toit.network] DEBUG: connecting {network: Cellular (internet)}
(0.181376) [toit] INFO: -> AT
(0.442819) [toit] INFO: -> AT
(0.703313) [toit] INFO: -> AT
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment