Created
March 18, 2016 10:17
-
-
Save sorjef/d238dd713f49347a88a5 to your computer and use it in GitHub Desktop.
Leddar on Linux x86-64. Working
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ************************************************* | |
| * Welcome to the LeddarC Demonstration Program! * | |
| ************************************************* | |
| Main Menu | |
| 1. Connect | |
| 2. Connect to single USB sensor | |
| 3. List Sensors | |
| 4. Replay Record | |
| 5. Configure Recording | |
| 6. Quit | |
| [timestamp] [threadID] facility level [function call] <message> | |
| -------------------------------------------------------------------------------- | |
| [ 0.000019] [00000bce] libusbx: debug [libusb_init] created default context | |
| [ 0.000081] [00000bce] libusbx: debug [libusb_init] libusbx v1.0.17.10830 | |
| [ 0.000133] [00000bce] libusbx: debug [find_usbfs_path] found usbfs at /dev/bus/usb | |
| [ 0.000166] [00000bce] libusbx: debug [op_init] bulk continuation flag supported | |
| [ 0.000180] [00000bce] libusbx: debug [op_init] zero length packet flag supported | |
| [ 0.000203] [00000bce] libusbx: debug [op_init] sysfs can relate devices | |
| [ 0.000215] [00000bce] libusbx: debug [op_init] sysfs has complete descriptors | |
| [ 0.000464] [00000bcf] libusbx: debug [linux_udev_event_thread_main] udev event thread entering. | |
| [ 0.000754] [00000bce] libusbx: debug [linux_get_device_address] getting address for device: usb1 detached: 0 | |
| [ 0.000777] [00000bce] libusbx: debug [linux_get_device_address] scan usb1 | |
| [ 0.000831] [00000bce] libusbx: debug [linux_get_device_address] bus=1 dev=1 | |
| [ 0.000847] [00000bce] libusbx: debug [linux_enumerate_device] busnum 1 devaddr 1 session_id 257 | |
| [ 0.000858] [00000bce] libusbx: debug [linux_enumerate_device] allocating new device for 1/1 (session 257) | |
| [ 0.000966] [00000bce] libusbx: debug [linux_get_device_address] getting address for device: 1-1 detached: 0 | |
| [ 0.000982] [00000bce] libusbx: debug [linux_get_device_address] scan 1-1 | |
| [ 0.001026] [00000bce] libusbx: debug [linux_get_device_address] bus=1 dev=5 | |
| [ 0.001041] [00000bce] libusbx: debug [linux_enumerate_device] busnum 1 devaddr 5 session_id 261 | |
| [ 0.001052] [00000bce] libusbx: debug [linux_enumerate_device] allocating new device for 1/5 (session 261) | |
| [ 0.001097] [00000bce] libusbx: debug [linux_get_parent_info] Dev 0x154d310 (1-1) has parent 0x154d250 (usb1) port 1 | |
| [ 0.001159] [00000bce] libusbx: debug [linux_get_device_address] getting address for device: usb2 detached: 0 | |
| [ 0.001174] [00000bce] libusbx: debug [linux_get_device_address] scan usb2 | |
| [ 0.001216] [00000bce] libusbx: debug [linux_get_device_address] bus=2 dev=1 | |
| [ 0.001231] [00000bce] libusbx: debug [linux_enumerate_device] busnum 2 devaddr 1 session_id 513 | |
| [ 0.001242] [00000bce] libusbx: debug [linux_enumerate_device] allocating new device for 2/1 (session 513) | |
| [ 0.001323] [00000bce] libusbx: debug [usbi_add_pollfd] add fd 9 events 1 | |
| [ 0.001342] [00000bce] libusbx: debug [usbi_add_pollfd] add fd 11 events 1 | |
| [ 0.001356] [00000bce] libusbx: debug [usbi_io_init] using timerfd for timeouts | |
| [ 0.001367] [00000bce] libusbx: debug [usbi_add_pollfd] add fd 13 events 1 | |
| [ 0.001382] [00000bce] libusbx: debug [libusb_get_device_list] | |
| [ 0.001404] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.001415] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.001428] [00000bce] libusbx: debug [libusb_open] open 1.5 | |
| [ 0.001452] [00000bce] libusbx: debug [usbi_add_pollfd] add fd 14 events 4 | |
| [ 0.001475] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.001514] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.001527] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.002292] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.002327] [00000bce] libusbx: debug [reap_for_handle] urb type=2 status=0 transferred=232 | |
| [ 0.002340] [00000bce] libusbx: debug [handle_control_completion] handling completion status 0 | |
| [ 0.002406] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.002434] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x154dae8 has callback 0x7f78b56467f0 | |
| [ 0.002447] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=232 | |
| [ 0.002510] [00000bce] libusbx: debug [libusb_close] | |
| [ 0.002537] [00000bce] libusbx: debug [usbi_remove_pollfd] remove fd 14 | |
| [ 0.002561] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.002579] [00000bce] libusbx: debug [libusb_get_device_list] | |
| [ 0.002594] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.002622] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.002634] [00000bce] libusbx: debug [libusb_open] open 1.5 | |
| [ 0.002658] [00000bce] libusbx: debug [usbi_add_pollfd] add fd 14 events 4 | |
| [ 0.002675] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.002706] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.002723] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.003403] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.003442] [00000bce] libusbx: debug [reap_for_handle] urb type=2 status=0 transferred=232 | |
| [ 0.003455] [00000bce] libusbx: debug [handle_control_completion] handling completion status 0 | |
| [ 0.003467] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.003480] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x154dae8 has callback 0x7f78b56467f0 | |
| [ 0.003492] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=232 | |
| [ 0.003541] [00000bce] libusbx: debug [libusb_get_device_list] | |
| [ 0.003579] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.003599] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.003609] [00000bce] libusbx: debug [libusb_open] open 1.5 | |
| [ 0.003634] [00000bce] libusbx: debug [usbi_add_pollfd] add fd 15 events 4 | |
| [ 0.003657] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.003780] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.003797] [00000bce] libusbx: debug [handle_events] poll() 5 fds with timeout in 60000ms | |
| [ 0.006152] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.006192] [00000bce] libusbx: debug [reap_for_handle] urb type=2 status=0 transferred=232 | |
| [ 0.006205] [00000bce] libusbx: debug [handle_control_completion] handling completion status 0 | |
| [ 0.006216] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.006228] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x154dae8 has callback 0x7f78b56467f0 | |
| [ 0.006238] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=232 | |
| [ 0.006252] [00000bce] libusbx: debug [libusb_close] | |
| [ 0.006276] [00000bce] libusbx: debug [usbi_remove_pollfd] remove fd 15 | |
| [ 0.006311] [00000bce] libusbx: debug [libusb_close] | |
| [ 0.006323] [00000bce] libusbx: debug [usbi_remove_pollfd] remove fd 14 | |
| Found 1 sensors of type USB | |
| 0 : [ ??????????????? ] | |
| [ 0.006406] [00000bce] libusbx: debug [libusb_get_device_list] | |
| [ 0.006422] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.006433] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.006442] [00000bce] libusbx: debug [libusb_open] open 1.5 | |
| [ 0.006467] [00000bce] libusbx: debug [usbi_add_pollfd] add fd 14 events 4 | |
| [ 0.006490] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.006588] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.006613] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.007142] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.007173] [00000bce] libusbx: debug [reap_for_handle] urb type=2 status=0 transferred=232 | |
| [ 0.007183] [00000bce] libusbx: debug [handle_control_completion] handling completion status 0 | |
| [ 0.007193] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.007205] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x154d1c8 has callback 0x7f78b56467f0 | |
| [ 0.007209] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=232 | |
| [ 0.007209] [00000bce] libusbx: debug [libusb_get_device_list] | |
| [ 0.007209] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.007209] [00000bce] libusbx: debug [libusb_get_device_descriptor] | |
| [ 0.007209] [00000bce] libusbx: debug [libusb_open] open 1.5 | |
| [ 0.007209] [00000bce] libusbx: debug [usbi_add_pollfd] add fd 15 events 4 | |
| [ 0.007209] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.007209] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.007658] [00000bce] libusbx: debug [handle_events] poll() 5 fds with timeout in 60000ms | |
| [ 0.008096] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.008155] [00000bce] libusbx: debug [reap_for_handle] urb type=2 status=0 transferred=232 | |
| [ 0.008165] [00000bce] libusbx: debug [handle_control_completion] handling completion status 0 | |
| [ 0.008175] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.008186] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x154d1c8 has callback 0x7f78b56467f0 | |
| [ 0.008195] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=232 | |
| [ 0.008208] [00000bce] libusbx: debug [libusb_close] | |
| [ 0.008219] [00000bce] libusbx: debug [usbi_remove_pollfd] remove fd 15 | |
| [ 0.008429] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.008457] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 8 | |
| [ 0.008506] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.008517] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.008751] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.008770] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=8 | |
| [ 0.008781] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.008791] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.008800] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.008810] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155cd58 has callback 0x7f78b56467f0 | |
| [ 0.008819] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=8 | |
| [ 0.008834] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.008845] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.008874] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.008885] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.009153] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.009187] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=64 | |
| [ 0.009198] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.009208] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.009218] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.009228] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155cd58 has callback 0x7f78b56467f0 | |
| [ 0.009238] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=64 | |
| [ 0.009264] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.009278] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 176 | |
| [ 0.009304] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.009327] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.009684] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.009715] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=176 | |
| [ 0.009726] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.009736] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.009745] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.009756] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155cd58 has callback 0x7f78b56467f0 | |
| [ 0.009766] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=176 | |
| [ 0.009950] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.009982] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 50 | |
| [ 0.010007] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.010018] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.010266] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.010344] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=50 | |
| [ 0.010369] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.010407] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.010421] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.010438] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ddd8 has callback 0x7f78b56467f0 | |
| [ 0.010454] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=50 | |
| [ 0.010474] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.010487] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.010514] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.010538] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.010752] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.010780] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=64 | |
| [ 0.010791] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.010802] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.010818] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.010829] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ddd8 has callback 0x7f78b56467f0 | |
| [ 0.010841] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=64 | |
| [ 0.010859] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.010872] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 162 | |
| [ 0.010892] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.010903] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.011258] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.011288] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=162 | |
| [ 0.011300] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.011311] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.011321] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.011332] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ddd8 has callback 0x7f78b56467f0 | |
| [ 0.011342] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=162 | |
| [ 0.011394] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.011407] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.011432] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.011444] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.011930] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.011951] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.011962] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.011972] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.011981] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.011992] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155eb08 has callback 0x7f78b56467f0 | |
| [ 0.012013] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.012034] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.012051] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.012071] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.012083] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.012293] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.012310] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.012343] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.012354] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.012364] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.012374] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.012384] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.012400] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.012411] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.012442] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.012454] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.012628] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.012654] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.012665] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.012674] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.012683] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.012693] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.012703] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.012715] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.012734] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.012755] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.012771] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.012975] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.013003] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.013014] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.013028] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.013041] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.013054] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.013063] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.013086] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.013099] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.013120] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.013130] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.013315] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.013333] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.013343] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.013360] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.013369] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.013380] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.013390] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.013402] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.013413] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.013433] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.013444] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.013769] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.013786] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.013795] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.013806] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.013823] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.013834] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.013843] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.013859] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.013873] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.013899] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.013910] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.014105] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.014122] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.014132] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.014141] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.014150] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.014161] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.014170] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.014183] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.014202] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.014226] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.014236] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.014462] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.014479] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.014488] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.014497] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.014507] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.014528] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.014537] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.014554] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.014565] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.014589] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.014611] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.014780] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.014806] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.014816] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.014828] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.014838] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.014849] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.014858] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.014871] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.014891] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.014921] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.014956] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.015091] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.015107] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.015118] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.015128] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.015137] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.015156] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.015165] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.015179] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.015196] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.015217] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.015233] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.015757] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.015773] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.015782] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.015792] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.015801] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.015811] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.015820] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.015835] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.015854] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.015876] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.015889] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.016377] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.016395] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.016404] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.016415] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.016433] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.016444] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.016454] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.016472] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.016484] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.016508] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.016519] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.016730] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.016758] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.016769] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.016782] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.016794] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.016809] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.016824] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.016839] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.016860] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.016882] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.016899] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.017391] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.017408] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.017417] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.017426] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.017435] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.017446] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.017465] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.017480] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.017493] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.017512] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.017524] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.017732] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.017757] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.017767] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.017776] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.017786] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.017797] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.017812] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.017853] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.017870] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.017895] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.017928] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.018466] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.018485] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.018496] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.018516] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.018528] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.018545] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.018555] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.018571] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.018588] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.018610] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.018621] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.019071] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.019089] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.019100] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.019110] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.019119] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.019130] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.019139] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.019152] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.019164] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.019182] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.019204] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.019429] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.019453] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.019491] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.019507] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.019529] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.019561] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.019611] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.019637] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.019650] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.019779] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.019818] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.019996] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.020038] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.020055] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.020074] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.020084] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.020095] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.020109] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.020125] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.020138] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.020164] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.020195] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.020596] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.020613] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.020624] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.020634] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.020673] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.020746] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.020790] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.020813] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.020831] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.020861] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.020878] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.021074] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.021095] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.021110] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.021119] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.021128] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.021140] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.021218] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.021243] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.021271] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.021299] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.021333] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.021634] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.021658] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.021670] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.021684] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.021696] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.021715] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.021725] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.021739] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.021751] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.021782] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.021799] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.022066] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.022089] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.022100] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.022110] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.022120] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.022129] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.022140] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.022153] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.022166] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.022197] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.022209] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.022422] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.022439] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.022457] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.022467] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.022477] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.022488] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.022497] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.022511] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.022522] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.022541] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.022561] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.022814] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.022832] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.022844] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.022859] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.022873] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.022890] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.022904] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.022930] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.022942] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.022961] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.022972] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.023425] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.023443] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.023462] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.023472] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.023483] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.023496] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.023506] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.023521] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.023542] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.023560] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.023571] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.023809] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.023833] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.023844] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.023856] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.023866] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.023885] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.023895] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.023916] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.023927] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.023948] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.023963] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.024198] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.024217] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.024229] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.024248] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.024258] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.024269] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.024278] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.024293] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.024311] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.024331] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.024383] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.024529] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.024546] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.024556] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.024565] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.024582] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.024593] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.024606] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.024619] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.024629] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.024647] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.024720] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.024989] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.025005] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.025016] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.025032] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.025042] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.025052] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.025066] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.025085] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.025106] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.025127] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.025145] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.025315] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.025338] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.025348] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.025357] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.025370] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.025382] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.025396] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.025411] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.025421] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.025440] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.025463] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.025629] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.025656] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.025666] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.025675] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.025684] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.025695] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.025704] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.025718] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.025737] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 17 | |
| [ 0.025756] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.025766] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.025935] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.025952] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=17 | |
| [ 0.025962] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.025972] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.025984] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.025996] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.026009] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=17 | |
| [ 0.026026] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.026048] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.026068] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.026084] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.026289] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.026339] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.026365] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.026406] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.026459] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.026498] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155dea8 has callback 0x7f78b56467f0 | |
| [ 0.026512] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| [ 0.026571] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.026583] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 8 | |
| [ 0.026613] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.026631] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.026780] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.026803] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=8 | |
| [ 0.026812] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.026823] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.026836] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.026850] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ed18 has callback 0x7f78b56467f0 | |
| [ 0.026864] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=8 | |
| [ 0.026886] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.026898] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.026924] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.026940] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.027268] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.027286] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=64 | |
| [ 0.027298] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.027315] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.027324] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.027335] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ed18 has callback 0x7f78b56467f0 | |
| [ 0.027344] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=64 | |
| [ 0.027357] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.027368] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 96 | |
| [ 0.027386] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.027397] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.027776] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.027793] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=96 | |
| [ 0.027804] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.027813] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.027825] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.027863] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ed18 has callback 0x7f78b56467f0 | |
| [ 0.027876] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=96 | |
| [ 0.027910] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.027927] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 8 | |
| [ 0.027961] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.027975] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.028151] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.028170] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=8 | |
| [ 0.028180] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.028192] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.028203] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.028214] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ef48 has callback 0x7f78b56467f0 | |
| [ 0.028224] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=8 | |
| [ 0.028238] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.028249] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.028292] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.028309] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.028606] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.028625] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=64 | |
| [ 0.028635] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.028646] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.028666] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.028678] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ef48 has callback 0x7f78b56467f0 | |
| [ 0.028691] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=64 | |
| [ 0.028709] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.028720] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.028756] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.028806] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.028960] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.028976] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=28 | |
| [ 0.028996] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.029011] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.029020] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.029031] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155ef48 has callback 0x7f78b56467f0 | |
| [ 0.029043] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=28 | |
| [ 0.029076] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.029088] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 8 | |
| [ 0.029115] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.029127] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.029285] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.029304] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=8 | |
| [ 0.029318] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.029329] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.029342] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.029353] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155f038 has callback 0x7f78b56467f0 | |
| [ 0.029373] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=8 | |
| [ 0.029391] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.029402] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.029469] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.029481] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.030256] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.030289] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=64 | |
| [ 0.030301] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.030312] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.030323] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.030334] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155f038 has callback 0x7f78b56467f0 | |
| [ 0.030345] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=64 | |
| [ 0.030369] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.030382] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 951 | |
| [ 0.030413] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.030428] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.031810] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.031847] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=951 | |
| [ 0.031858] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.031869] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.031879] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.031891] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x155f038 has callback 0x7f78b56467f0 | |
| [ 0.031902] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=951 | |
| [ 0.031981] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.031997] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 18 | |
| [ 0.032047] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.032066] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.032651] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.032671] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=18 | |
| [ 0.032682] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.032701] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.032712] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.032725] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x1560ba8 has callback 0x7f78b56467f0 | |
| [ 0.032740] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=18 | |
| [ 0.032760] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 0.032787] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 0.032821] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 0.032842] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 0.033064] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 0.033083] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=25 | |
| [ 0.033103] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 0.033113] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 0.033127] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 0.033165] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x1560ba8 has callback 0x7f78b56467f0 | |
| [ 0.033180] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=25 | |
| Address AF16001 | |
| Connected Menu | |
| 1. Read Data | |
| 2. Read Configuration | |
| 3. Change Configuration | |
| 4. Start Recording | |
| 5. Disconnect | |
| 1 | |
| Press a key to start reading data and press a key again to stop. | |
| a[ 2.616175] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.616234] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 20 | |
| [ 2.616284] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.616300] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.616706] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.616748] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=20 | |
| [ 2.616762] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.616776] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.616790] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 2.616806] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x15617d8 has callback 0x7f78b56467f0 | |
| [ 2.616820] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=20 | |
| [ 2.616838] [00000bce] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.616852] [00000bce] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 64 | |
| [ 2.616918] [00000bce] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.616953] [00000bce] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.617205] [00000bce] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.617239] [00000bce] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=16 | |
| [ 2.617258] [00000bce] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.617274] [00000bce] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.617305] [00000bce] libusbx: debug [disarm_timerfd] | |
| [ 2.617362] [00000bce] libusbx: debug [usbi_handle_transfer_completion] transfer 0x15617d8 has callback 0x7f78b56467f0 | |
| [ 2.617379] [00000bce] libusbx: debug [sync_transfer_cb] actual_length=16 | |
| [ 2.617822] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.617855] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.617949] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.617988] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.618327] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.618366] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=8 | |
| [ 2.618380] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.618392] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.618404] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.618418] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009a58 has callback 0x7f78b56467f0 | |
| [ 2.618430] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=8 | |
| [ 2.618445] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.618457] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.618482] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.618508] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.623761] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.623828] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.623844] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.623858] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.623871] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.623889] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009a58 has callback 0x7f78b56467f0 | |
| [ 2.623907] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.623961] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.623978] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.624012] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.624027] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.625686] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.625718] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.625737] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.625752] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.625764] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.625791] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009a58 has callback 0x7f78b56467f0 | |
| [ 2.625805] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.92 3.46 3.47 3.57 3.52 3.52 3.49 3.43 3.26 3.34 3.48 3.53 | |
| [ 2.626144] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.626161] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.626390] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.626415] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.636009] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.636070] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.636083] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.636095] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.636108] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.636123] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.636135] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.636160] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.636173] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.636201] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.636215] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.636593] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.636679] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.636695] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.636707] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.636720] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.636735] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.636746] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.82 3.37 3.51 3.55 3.57 3.53 3.50 3.44 3.26 3.38 3.49 3.48 | |
| [ 2.636824] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.636845] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.636884] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.636906] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.648399] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.648461] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.648474] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.648487] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.648500] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.648506] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.648506] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.648506] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.648506] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.648506] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.648895] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.649193] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.649218] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.649230] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.649242] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.649254] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.649267] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.649279] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.97 3.37 3.56 3.58 3.56 3.51 3.49 3.45 3.25 3.37 3.50 3.53 | |
| [ 2.649368] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.649382] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.649479] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.649500] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.660508] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.660562] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.660573] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.660584] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.660595] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.660609] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.660620] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.660643] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.660655] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.660681] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.660693] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.661085] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.661111] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.661134] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.661145] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.661158] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.661170] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.661180] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.87 3.39 3.57 3.54 3.59 3.50 3.48 3.43 3.25 3.32 3.46 3.54 | |
| [ 2.661296] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.661360] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.661389] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.661406] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.672767] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.672833] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.672846] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.672858] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.672871] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.672886] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.672898] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.672922] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.672935] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.672963] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.672977] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.674580] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.674608] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.674633] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.674646] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.674657] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.674671] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.674682] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.94 3.41 3.58 3.56 3.55 3.54 3.48 3.44 3.27 3.33 3.51 3.57 | |
| [ 2.674748] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.674761] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.674789] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.674803] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.684882] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.684936] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.684951] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.684965] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.684979] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.684995] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.685007] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.685032] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.685047] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.685076] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.685091] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.685478] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.685520] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.685535] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.685547] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.685561] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.685576] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.685590] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.81 3.37 3.53 3.59 3.56 3.51 3.48 3.42 3.23 3.32 3.48 3.52 | |
| [ 2.685787] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.685809] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.685840] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.685855] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.697302] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.697369] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.697385] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.697400] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.697414] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.697431] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.697445] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.697473] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.697489] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.697523] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.697540] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.699017] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.699060] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.699073] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.699085] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.699097] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.699116] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.699132] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.95 3.37 3.52 3.54 3.58 3.53 3.49 3.43 3.24 3.33 3.51 3.54 | |
| [ 2.699212] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.699226] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.699254] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.699268] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.709388] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.709444] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.709456] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.709465] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.709476] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.709489] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.709498] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.709528] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.709540] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.709576] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.709588] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.710006] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.710031] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.710052] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.710063] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.710073] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.710084] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.710093] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.90 3.38 3.53 3.55 3.55 3.54 3.51 3.43 3.24 3.34 3.50 3.56 | |
| [ 2.710152] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.710172] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.710198] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.710210] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.721616] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.721683] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.721698] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.721711] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.721725] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.721742] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.721755] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.721783] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.721798] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.721829] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.721845] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.722292] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.722362] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.722387] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.722401] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.722414] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.722428] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.722441] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.80 3.39 3.52 3.60 3.58 3.52 3.47 3.44 3.28 3.36 3.46 3.54 | |
| [ 2.722576] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.722602] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.722636] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.722654] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.733923] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.733992] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.734007] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.734021] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.734035] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.734051] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.734067] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.734094] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.734109] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.734142] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.734158] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.734652] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.734716] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.734758] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.734781] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.734795] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.734811] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.734823] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.81 3.38 3.56 3.57 3.54 3.51 3.48 3.42 3.29 3.35 3.46 3.50 | |
| [ 2.734931] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.734965] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.735073] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.735162] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.746577] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.746634] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.746646] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.746657] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.746668] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.746682] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.746693] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.746715] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.746727] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.746753] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.746767] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.747807] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.747827] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.747837] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.747847] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.747866] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.747878] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.747887] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.85 3.37 3.49 3.52 3.56 3.53 3.47 3.43 3.27 3.32 3.48 3.52 | |
| [ 2.747942] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.747954] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.747977] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.747998] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.758239] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.758288] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.758303] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.758316] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.758329] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.758345] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.758358] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.758382] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.758397] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.758426] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.758444] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.758941] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.759009] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.759042] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.759055] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.759083] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.759101] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.759130] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.98 3.32 3.55 3.58 3.55 3.51 3.49 3.44 3.24 3.31 3.48 3.53 | |
| [ 2.759208] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.759252] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.759279] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.759296] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.770665] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.770732] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.770748] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.770762] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.770775] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.770793] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.770806] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.770833] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.770848] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.770880] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.770895] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.771333] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.771364] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.771382] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.771402] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.771415] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.771444] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.771458] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.87 3.39 3.56 3.52 3.55 3.53 3.48 3.44 3.25 3.32 3.48 3.51 | |
| [ 2.771529] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.771545] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.771575] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.771590] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.782700] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.782768] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.782783] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.782796] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.782810] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.782826] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.782839] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.782869] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.782883] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.782916] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.782934] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.783395] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.783425] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.783452] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.783466] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.783479] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.783537] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.783599] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.75 3.41 3.55 3.53 3.56 3.51 3.49 3.45 3.27 3.34 3.48 3.58 | |
| [ 2.783683] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.783697] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.783828] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.783848] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.795052] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.795126] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.795147] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.795167] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.795187] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.795211] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.795230] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.795264] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.795286] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.795331] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.795378] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.795944] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.795990] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.796021] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.796047] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.796067] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.796113] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.796138] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.83 3.48 3.52 3.55 3.55 3.51 3.49 3.42 3.27 3.36 3.49 3.52 | |
| [ 2.796315] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.796354] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.796404] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.796452] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.807514] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.807581] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.807595] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.807607] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.807620] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.807623] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.807623] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.807781] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.807796] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.807827] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.807842] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.808927] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.808956] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.808967] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.808980] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.808991] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.809015] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.809026] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 1.01 3.37 3.53 3.57 3.54 3.52 3.48 3.42 3.26 3.34 3.49 3.52 | |
| [ 2.809138] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.809205] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.809310] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.809338] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.819508] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.819555] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.819569] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.819583] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.819596] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.819612] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.819628] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.819649] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.819666] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.819710] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.819726] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.821243] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.821266] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.821276] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.821287] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.821298] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.821310] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.821320] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.85 3.45 3.56 3.57 3.56 3.52 3.48 3.43 3.27 3.35 3.50 3.54 | |
| [ 2.821382] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.821395] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.821420] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.821433] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.832223] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.832277] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.832289] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.832347] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.832389] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.832402] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.832412] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.832435] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.832447] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.832478] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.832500] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.832854] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.832874] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.832885] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.832905] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.832915] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.832926] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.832936] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.95 3.44 3.55 3.56 3.57 3.51 3.47 3.43 3.25 3.33 3.49 3.57 | |
| [ 2.833001] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.833013] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.833047] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.833059] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.844212] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.844280] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.844292] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.844303] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.844315] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.844329] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.844339] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.844362] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.844375] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.844402] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.844415] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.844967] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.845009] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.845021] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.845032] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.845045] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.845057] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.845067] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.79 3.38 3.54 3.55 3.56 3.54 3.48 3.42 3.24 3.31 3.47 3.53 | |
| [ 2.845132] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.845148] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.845181] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.845199] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.856309] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.856356] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.856370] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.856383] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.856397] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.856413] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.856426] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.856449] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.856463] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.856533] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.856630] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.856984] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.857013] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.857031] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.857043] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.857055] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.857080] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.857093] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.87 3.38 3.55 3.55 3.58 3.52 3.48 3.45 3.25 3.32 3.45 3.56 | |
| [ 2.857146] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.857160] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.857189] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.857210] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.868963] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.869031] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.869044] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.869056] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.869069] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.869085] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.869096] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.869128] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.869141] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.869174] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.869188] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.870301] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.870347] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.870360] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.870372] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.870384] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.870398] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.870409] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.86 3.38 3.58 3.58 3.56 3.54 3.47 3.44 3.26 3.33 3.46 3.51 | |
| [ 2.870476] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.870490] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.870523] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.870545] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.880819] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.880875] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.880890] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.880904] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.880917] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.880934] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.880948] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.880973] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.880988] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.881019] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.881035] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.882738] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.882778] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.882791] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.882802] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.882815] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.882830] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.882841] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.83 3.41 3.53 3.54 3.58 3.53 3.48 3.43 3.28 3.32 3.50 3.50 | |
| [ 2.882904] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.882918] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.882944] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.882957] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.892910] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.892968] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.892983] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.892996] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.893009] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.893026] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.893040] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.893065] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.893080] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.893110] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.893127] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.893607] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.893639] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.893653] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.893667] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.893692] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.893708] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.893721] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 1.02 3.40 3.51 3.54 3.56 3.53 3.48 3.42 3.24 3.33 3.48 3.53 | |
| [ 2.893860] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.893879] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.893960] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.893979] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.905063] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.905108] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.905122] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.905135] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.905149] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.905165] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.905178] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.905198] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.905213] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.905240] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.905270] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.905657] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.905696] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.905713] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.905735] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.905749] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.905764] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.905777] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.87 3.39 3.56 3.52 3.57 3.51 3.47 3.42 3.24 3.33 3.47 3.52 | |
| [ 2.905839] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.905855] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.905907] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.905928] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.917075] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.917133] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.917145] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.917155] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.917167] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.917181] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.917192] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.917216] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.917228] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.917255] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.917268] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.917653] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.917678] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.917700] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.917711] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.917721] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.917766] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.917786] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.91 3.44 3.56 3.58 3.57 3.50 3.47 3.44 3.24 3.32 3.50 3.54 | |
| [ 2.917909] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.917927] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.917962] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.917981] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.929308] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.929364] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.929379] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.929393] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.929406] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.929424] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.929438] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.929463] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.929478] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.929509] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.929525] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.930040] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.930095] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.930110] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.930124] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.930137] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.930165] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.930178] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.83 3.33 3.56 3.54 3.55 3.55 3.48 3.44 3.23 3.33 3.49 3.50 | |
| [ 2.930249] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.930265] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.930296] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.930312] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.941199] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.941266] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.941281] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.941295] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.941310] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.941325] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.941338] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.941366] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.941381] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.941412] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.941428] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.941865] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.941895] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.941912] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.941930] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.941943] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.941959] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.941974] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.85 3.40 3.57 3.55 3.55 3.50 3.47 3.44 3.25 3.37 3.51 3.54 | |
| [ 2.942071] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.942088] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.942121] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.942144] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.953412] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.953480] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.953497] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.953511] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.953524] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.953540] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.953553] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.953580] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.953596] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.953646] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.953663] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.955120] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.955162] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.955175] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.955187] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.955209] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.955223] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.955247] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 1.11 3.42 3.51 3.55 3.55 3.53 3.48 3.42 3.26 3.36 3.48 3.51 | |
| [ 2.955328] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.955345] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.955378] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.955396] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.965685] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.965738] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.965752] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.965766] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.965779] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.965796] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.965808] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.965832] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.965847] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.965877] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.965892] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.966355] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.966385] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.966399] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.966413] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.966428] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.966456] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.966470] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.85 3.34 3.55 3.54 3.55 3.48 3.48 3.47 3.25 3.34 3.50 3.54 | |
| [ 2.966531] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.966546] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.966582] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.966612] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.977888] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.977978] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.978033] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.978106] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.978123] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.978140] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.978153] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.978179] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.978194] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.978242] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.978257] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.978683] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.978708] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.978725] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.978740] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.978751] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.978765] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.978776] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.93 3.32 3.53 3.54 3.56 3.51 3.48 3.44 3.24 3.34 3.48 3.54 | |
| [ 2.978834] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.978847] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.978874] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.978888] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.989992] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.990030] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=456 | |
| [ 2.990042] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.990052] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.990063] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.990076] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.990087] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=456 | |
| [ 2.990105] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.990116] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.990140] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.990164] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
| [ 2.990573] [00000bd0] libusbx: debug [handle_events] poll() returned 1 | |
| [ 2.990598] [00000bd0] libusbx: debug [reap_for_handle] urb type=3 status=0 transferred=80 | |
| [ 2.990611] [00000bd0] libusbx: debug [handle_bulk_completion] handling completion status 0 of bulk urb 1/1 | |
| [ 2.990627] [00000bd0] libusbx: debug [handle_bulk_completion] last URB in transfer --> complete! | |
| [ 2.990642] [00000bd0] libusbx: debug [disarm_timerfd] | |
| [ 2.990666] [00000bd0] libusbx: debug [usbi_handle_transfer_completion] transfer 0x7f78ac009b88 has callback 0x7f78b56467f0 | |
| [ 2.990677] [00000bd0] libusbx: debug [sync_transfer_cb] actual_length=80 | |
| 0.79 3.40 3.59 3.60 3.55 3.51 3.48 3.43 3.26 3.37 3.49 3.54 | |
| [ 2.990729] [00000bd0] libusbx: debug [add_to_flying_list] arm timerfd for timeout in 1000ms (first in line) | |
| [ 2.990742] [00000bd0] libusbx: debug [submit_bulk_transfer] need 1 urbs for new transfer with length 10000 | |
| [ 2.990766] [00000bd0] libusbx: debug [libusb_handle_events_timeout_completed] doing our own event handling | |
| [ 2.990809] [00000bd0] libusbx: debug [handle_events] poll() 4 fds with timeout in 60000ms | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment