Last active
May 3, 2023 13:12
-
-
Save soxrok2212/4d4bb0606b971e3c1d826ab3cf033302 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Cougar Mountain C0 - Boot Ram. | |
Version: 0.3.3 (Apr 24 2017, 14:24:33) | |
Boot Param memory dump: | |
[0xFFFF3FFC] - 0x00030003 | |
[0xFFFF3FF8] - 0x00000000 | |
[0xFFFF3FF4] - 0x00000010 | |
[0xFFFF3FF0] - 0x00094FC8 | |
[0xFFFF3FEC] - 0x00000000 | |
[0xFFFF3FE8] - 0x000000E3 | |
[0xFFFF3FE4] - 0x00000011 | |
[0xFFFF3FE0] - 0x0EC00000 | |
[0xFFFF3FDC] - 0x10000000 | |
[0xFFFF3FD8] - 0x0F600000 | |
[0xFFFF3FD4] - 0x00500000 | |
[0xFFFF3FD0] - 0xFFFF3000 | |
[0xFFFF3FCC] - 0x00000088 | |
[0xFFFF3FC8] - 0x00000000 | |
[0xFFFF3FC4] - 0x00000000 | |
[0xFFFF3FC0] - 0x00000000 | |
[0xFFFF3FBC] - 0x00000000 | |
[0xFFFF3FB8] - 0x00000000 | |
[0xFFFF3FB4] - 0x00000000 | |
[0xFFFF3FB0] - 0x00000000 | |
[0xFFFF3FAC] - 0x00000000 | |
[0xFFFF3FA8] - 0x00000000 | |
[0xFFFF3FA4] - 0x00000000 | |
Command line: root=PARTUUID=6C9AF008-3A7A-4278-A63A-CE03421B0FC1 fs1=/dev/mmcbl | |
Reset Type - 0x00000000 | |
Reset Reason - 0x00000000 | |
Booting kernel at 0xf600000 | |
Done. | |
Uncompressing Linux... done, booting the kernel. | |
Booting Linux on physical CPU 0x0 | |
Linux version 4.9.199 (caojun@US1PON) (gcc version 6.4.0 (GCC) ) #1 PREEMPT Fri0 | |
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c538fd | |
CPU: VIPT aliasing data cache, VIPT aliasing instruction cache | |
Machine: puma7 | |
Ignoring unrecognised tag 0x00000000 | |
Memory policy: Data cache writeback | |
Reserved 4096k DSP memory starting from Physical 0x00c00000 | |
Set RCE PDSP SAI to 0x32 | |
CRU 7 is already in CRU state 3 [ignore operation] | |
Initialized Peripheral Port Remap Register to base : 0x50000000 | |
Puma-7 system_rev = 1506 -- docsis ip rev = 16 | |
BootConfig set Clock mux to 1 | |
uspace_delay calibration complete: loop_cnt=48, cycles_spent=448, cycles_in_us=0 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 | |
Kernel command line: root=PARTUUID=6C9AF008-3A7A-4278-A63A-CE03421B0FC1 fs1=/de | |
PID hash table entries: 1024 (order: 0, 4096 bytes) | |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Memory: 253516K/262144K available (3864K kernel code, 228K rwdata, 1084K rodata) | |
Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
vmalloc : 0x90800000 - 0xff800000 (1776 MB) | |
lowmem : 0x80000000 - 0x90000000 ( 256 MB) | |
modules : 0x7f000000 - 0x80000000 ( 16 MB) | |
.text : 0x80018000 - 0x803de5e8 (3866 kB) | |
.init : 0x804ef000 - 0x80522000 ( 204 kB) | |
.data : 0x80522000 - 0x8055b100 ( 229 kB) | |
.bss : 0x8055b100 - 0x806008f8 ( 662 kB) | |
Preemptible hierarchical RCU implementation. | |
Build-time adjustment of leaf fanout to 32. | |
NR_IRQS:150 | |
Interrupt controller revision : 4e822100 | |
Precise sched_clock: load 37500, nsec/count 266 | |
Puma7 Timer0 initialized | |
console [ttyS0] enabled | |
INITIAL_JIFFIES 4294937296 | |
jiffies 4294937311 | |
Calibrating delay loop... 476.77 BogoMIPS (lpj=2383872) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
CPU: Testing write buffer coherency: ok | |
Setting up static identity map for 0xec18200 - 0xec1825c | |
PMU: Early initialization | |
devtmpfs: initialized | |
VFP support v0.3: not present | |
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191s | |
futex hash table entries: 256 (order: 0, 7168 bytes) | |
NET: Registered protocol family 16 | |
DMA: preallocated 256 KiB pool for atomic coherent allocations | |
cpuidle: using governor ladder | |
PP SRAMs are enable now. | |
cppi_mem_profile_init:4980: puma7_cppi Info: CPPI memProfile 0 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 16384 bu0 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 10240 bu1 | |
cppi_buffer_pool_count:4863: puma7_cppi Info: Memory wasted, buffer count 102402 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 8192 bu2 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 16384 bu3 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 0 bu4 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 0 bu5 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 0 bu6 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 0 bu7 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 0 bu8 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 1024 bu9 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 640 bu0 | |
cppi_buffer_pool_count:4863: puma7_cppi Info: Memory wasted, buffer count 640 f2 | |
cppi_buffer_pool_count:4854: puma7_cppi Info: CPPI config will request 256 bu1 | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 0: desc num 256, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 1: desc num 39520, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 2: desc num 11808, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 3: desc num 0, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 4: desc num 0, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 5: desc num 0, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 6: desc num 0, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 7: desc num 0, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 8: desc num 0, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 9: desc num 0, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 10: desc num 0, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 11: desc num 1, desc r | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 12: desc num 64, desc p | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 13: desc num 0, desc p | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 14: desc num 64, desc p | |
cppi_desc_regions_check:1421: puma7_cppi Info: Region 15: desc num 7072, desc p | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 12, count 64, size 512,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 14, count 64, size 128,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 256, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 512, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 32, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 32, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 32, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 32, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 32, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 256, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 1024, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 6048, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 16384, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 4096, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 1024, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 1024, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 256, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 0, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 0, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 128, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 0, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 192, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 0, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 32, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 0, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 32, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 32, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 0, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 192, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 15, count 0, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 512, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 2048, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 4096, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 64, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 1, count 16384, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 512, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 512, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 512, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 512, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 256, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 256, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 128, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 128, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 128, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 2, count 128, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 0, count 128, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 0, count 128, size 64,] | |
cppi_free_queues_check:1483: puma7_cppi Info: Region 11, count 1, size 32,] | |
avalanche_cppi_init:5131: puma7_cppi Info: PAL_cppi4Init of CPPI41_DOMAIN_PP iny | |
SRAM: Initializing Intel(R) SRAM driver | |
SRAM: Create device: /dev/sram_drv0 | |
SRAM: Create proc file /proc/bootparams | |
HW Mutex: Initializing Intel(R) HW MUTEX driver | |
HW Mutex: pmaster 0x80666e00 ,irq_num 93, reg_base 0xd0190000 | |
HW Mutex: driver is running. HW MUTEX Code-Id = 0x1000c936 | |
MODPHY: Initializing Intel(R) MODPHY driver | |
handshake_server:boot_status_report:100 Client ID = 3 reported sync ready. sync7 | |
HW_MBOX_KERNEL_INFO: Initializing Intel(R) HW_MBOX Controller Driver version 0.4 | |
NET: Registered protocol family 43 | |
HW_MBOX_KERNEL_INFO: initial configuration completed, setting START! | |
SPI MASTER: Initializing Intel(R) SPI MASTER driver | |
cppi_client:cppi_mrpc_call:95 ERROR: mrpc cppi not initialized | |
pps_core: LinuxPPS API ver. 1 registered | |
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@> | |
PTP clock support registered | |
mrpc:mrpc_init:1208 mrpc init done. | |
PUMA7: /proc/avalanche/reboot_hook created | |
sdhci-puma7: /proc/mmc/dump_regs added. * | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 2048 (order: 1, 8192 bytes) | |
TCP bind hash table entries: 2048 (order: 3, 40960 bytes) | |
TCP: Hash tables configured (established 2048 bind 2048) | |
UDP hash table entries: 256 (order: 1, 12288 bytes) | |
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) | |
NET: Registered protocol family 1 | |
Initializing Cru Control module | |
CRU: /dev/CruCtrl created | |
CRU: /proc/cru/ created | |
NP/APP MBX: Initializing Intel(R) NP-CPU/APP-CPU MailBox driver | |
NP/APP MBX: Create device: /dev/arm_atom_mbx | |
GPIO: Initializing Intel(R) GPIO driver | |
GPIO: Create device: /dev/docsis_gpio_dev | |
cppi_client:cppi_mrpc_call:95 ERROR: mrpc cppi not initialized | |
GPIO: Add proc file: /proc/gpio | |
PMU: Initializing module | |
PMU: /proc/pmu/ created | |
workingset: timestamp_bits=30 max_order=16 bucket_order=0 | |
squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
jitterentropy: Initialization failed with host not compliant with requirements:2 | |
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
io scheduler noop registered (default) | |
cppi_client:cppi_mrpc_call:95 ERROR: mrpc cppi not initialized | |
cppi_client:cppi_mrpc_call:95 ERROR: mrpc cppi not initialized | |
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled | |
serial8250: ttyS0 at MMIO 0xf0070003 (irq = 9, base_baud = 7500000) is a TI 165A | |
serial8250: ttyS1 at MMIO 0xf0050003 (irq = 7, base_baud = 7500000) is a TI 165A | |
serial8250: ttyS2 at MMIO 0xf0060003 (irq = 8, base_baud = 7500000) is a TI 165A | |
TI LED driver initialized [major=244] | |
spi_master spi1: will run message pump with RR 95 priority | |
cppi_client:cppi_mrpc_call:95 ERROR: mrpc cppi not initialized | |
ti_codec_spi.0: TI Codec SPI Controller driver at 0xd01200c8 (irq = 0) | |
watchdog: TI Avalanche Watchdog Timer. | |
watchdog: Enabled, timer margin set to 34 seconds. | |
sdhci: Secure Digital Host Controller Interface driver | |
sdhci: Copyright(c) Pierre Ossman | |
sdhci-pltfm: SDHCI platform and OF driver helper | |
sdhci-pltfm: For dual boot with APP-CPU, disable all writes to host controller | |
mmc0: Caps0 = 0x446CC8B2 | |
mmc0: Caps1 = 0x80000007 | |
mmc0: 3.3V regulator output did not became stable | |
cppi_client:cppi_mrpc_call:95 ERROR: mrpc cppi not initialized | |
mmc0: SDHCI controller on sdhci-puma7.0 [sdhci-puma7.0] using ADMA | |
mrpc:mrpc_server_register:967 MRPC Server: High Priority Workqueue Created | |
mrpc:mrpc_server_register:985 server modphy registered with id 5 | |
mrpc:mrpc_server_register:967 MRPC Server: High Priority Workqueue Created | |
mrpc:mrpc_server_register:985 server handshake_server registered with id 6 | |
mrpc:mrpc_client_register:809 client handshake_client registered with id 6 | |
mrpc:mrpc_server_register:967 MRPC Server: High Priority Workqueue Created | |
mrpc:mrpc_server_register:985 server cppi_server registered with id 9 | |
mrpc:mrpc_client_register:809 client cppi_client registered with id 9 | |
mrpc:mrpc_client_register:809 client Session Group Counter registered with id 12 | |
mrpc:mrpc_client_register:809 client remote_config registered with id 15 | |
mrpc:mrpc_server_register:967 MRPC Server: High Priority Workqueue Created | |
mrpc:mrpc_server_register:985 server gpio registered with id 14 | |
mrpc:mrpc_server_register:967 MRPC Server: High Priority Workqueue Created | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
mrpc:mrpc_server_register:985 server pmu_server registered with id 16 | |
Netfilter messages via NETLINK v0.30. | |
nf_conntrack version 0.5.0 (4096 buckets, 16384 max) | |
ctnetlink v0.93: registering with nfnetlink. | |
nf_conntrack_rtsp v0.7 loading | |
nf_nat_rtsp v0.7 loading | |
IPVS: Registered protocols () | |
IPVS: Connection hash table configured (size=4096, memory=32Kbytes) | |
IPVS: Creating netns size=1024 id=0 | |
IPVS: ipvs loaded. | |
ipip: IPv4 and MPLS over IPv4 tunneling driver | |
gre: GRE over IPv4 demultiplexor driver | |
ip_gre: GRE over IPv4 tunneling driver | |
ip_tables: (C) 2000-2006 Netfilter Core Team | |
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully | |
arp_tables: arp_tables: (C) 2002 David S. Miller | |
Initializing XFRM netlink socket | |
NET: Registered protocol family 10 | |
ip6_tables: (C) 2000-2006 Netfilter Core Team | |
ip6_gre: GRE over IPv6 tunneling driver | |
NET: Registered protocol family 17 | |
NET: Registered protocol family 15 | |
Bridge firewalling registered | |
Ebtables v2.0 registered | |
l2tp_core: L2TP core driver, V2.0 | |
8021q: 802.1Q VLAN Support v1.8 | |
CPPI41 HW Mailbox: init DONE | |
handshake_server:boot_status_report:100 Client ID = 2 reported sync ready. sync3 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
Waiting for root device PARTUUID=6C9AF008-3A7A-4278-A63A-CE03421B0FC1... | |
random: fast init done | |
mmc0: new DDR MMC card at address 0001 | |
mmcblk0: mmc0:0001 MMC01G 940 MiB | |
mmcblk0boot0: mmc0:0001 MMC01G partition 1 2.00 MiB | |
mmcblk0boot1: mmc0:0001 MMC01G partition 2 2.00 MiB | |
GPT:Primary header thinks Alt. header is not at the end of the disk. | |
GPT:1894399 != 1925119 | |
GPT:Alternate GPT header not at the end of the disk. | |
GPT:1894399 != 1925119 | |
GPT: Use GNU Parted to correct GPT errors. | |
mmcblk0: p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
VFS: Mounted root (squashfs filesystem) readonly on device 179:7. | |
devtmpfs: mounted | |
Freeing unused kernel memory: 204K | |
This architecture does not have kernel memory protection. | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
mrpc:mrpc_call:640 [C9 (cppi_client)] hwMbox_sendOpcode returned error, ret=-1 | |
cppi_client:cppi_mrpc_call:103 ERROR: ret=-1, errcode=0 | |
handshake_server:boot_status_report:100 Client ID = 0 reported sync ready. sync2 | |
random: systemd: uninitialized urandom read (16 bytes read) | |
systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APP) | |
systemd[1]: Detected architecture arm-be. | |
Welcome to DOCSIS 3.1 Cable Modem 3.1 (morty)! | |
systemd[1]: Set hostname to <puma>. | |
random: systemd: uninitialized urandom read (16 bytes read) | |
systemd[1]: Initializing machine ID from random generator. | |
systemd[1]: Installed transient /etc/machine-id file. | |
random: systemd-sysv-ge: uninitialized urandom read (16 bytes read) | |
systemd[1]: Listening on Journal Socket. | |
[ OK ] Listening on Journal Socket. | |
systemd[1]: Created slice System Slice. | |
[ OK ] Created slice System Slice. | |
systemd[1]: Starting Apply Kernel Variables... | |
Starting Apply Kernel Variables... | |
systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting Remount Root and Kernel File Systems... | |
systemd[1]: Reached target Swap. | |
[ OK ] Reached target Swap. | |
Starting Puma filesystem setup... | |
[ OK ] Created slice system-getty.slice. | |
[ OK ] Listening on Journal Socket (/dev/log). | |
Starting Journal Service... | |
[ OK ] Listening on udev Kernel Socket. | |
Mounting Debug File System... | |
[ OK ] Started Avalanche Watchdog Daemon. | |
[ OK ] Reached target Slices. | |
[ OK ] Listening on udev Control Socket. | |
[ OK ] Reached target Paths. | |
[ OK ] Reached target Remote File Systems. | |
Starting Adjusting Puma kernel settings... | |
Starting Create Static Device Nodes in /dev... | |
Mounting Temporary Directory... | |
[ OK ] Started Apply Kernel Variables. | |
[ OK ] Started Journal Service. | |
watchdog: Enabled, timer margin set to 34 seconds. | |
TI Watchdog-RT daemon started <kick interval = 10 seconds> | |
[ OK ] Started Create Static Device Nodes in /dev. | |
Starting udev Kernel Device Manager... | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
Calibrate: prev cal 0, new cal 0 | |
About to set realtime runtime... | |
[ OK ] Mounted Debug File System. | |
[ OK ] Mounted Temporary Directory. | |
[ OK ] Started Remount Root and Kernel File Systems. | |
[ OK ] Started Adjusting Puma kernel settings. | |
puma_fs.sh: waiting... ls: /dev/disk/by-partlabel/NP_CPU_NVRAM: No such file ory | |
Starting udev Coldplug all Devices... | |
Starting Flush Journal to Persistent Storage... | |
[ OK ] Reached target Local File Systems (Pre). | |
Mounting /var/volatile... | |
[ OK ] Mounted /var/volatile. | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
systemd-journald[70]: Received request to flush runtime journal from PID 1 | |
[ OK ] Started Flush Journal to Persistent Storage. | |
puma_fs.sh: waiting... ls: /dev/disk/by-partlabel/NP_CPU_NVRAM: No such file ory | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
[ OK ] Started udev Kernel Device Manager. | |
puma_fs.sh: waiting... ls: /dev/disk/by-partlabel/NP_CPU_NVRAM: No such file ory | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
puma_fs.sh: waiting... ls: /dev/disk/by-partlabel/NP_CPU_NVRAM: No such file ory | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
[ OK ] Started udev Coldplug all Devices. | |
fsck.ext3 -p /dev/disk/by-partlabel/NP_CPU_NVRAM | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
/dev/disk/by-partlabel/NP_CPU_NVRAM: recovering journal | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
/dev/disk/by-partlabel/NP_CPU_NVRAM: clean, 121/14592 files, 7281/58368 blocks | |
mount -t ext3 /dev/disk/by-partlabel/NP_CPU_NVRAM /nvram -o data=journal -o bar1 | |
EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_! | |
EXT4-fs (mmcblk0p16): mounting ext3 file system using the ext4 subsystem | |
EXT4-fs (mmcblk0p16): mounted filesystem with journalled data mode. Opts: data=1 | |
/dev/disk/by-partlabel/NP_CPU_NVRAM mounted successfuly to /nvram | |
[ OK ] Started Puma filesystem setup. | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
Starting Bind mount volatile /var/spool... | |
Starting Bind mount volatile /etc/shadow... | |
Starting UCI default setup... | |
Starting Bind mount volatile /var/cache... | |
Starting Console Initialization... | |
Starting Bind mount volatile /var/lib... | |
Starting ARM log partition setup... | |
Starting Bind mount volatile /etc/passwd... | |
handshake_server:mrpc_handshake_boot_status:119 Call handshake boot status | |
mkdir: can't create directory '/var/tmp/': No such file or directory | |
create /var/tmp/uci successfully... |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment