SDAPMUW-512G-1022 SanDisk | Mouser
In case you use Thinkpad or GPD laptops, it might help you.
SDAPMUW-512G-1022 SanDisk | Mouser
In case you use Thinkpad or GPD laptops, it might help you.
Sometimes you break your Windows Boot Manager when you set your PC to a dualboot configuration.
In some case, start-up Repair won't help you because files in EFI partition are missing.
If the Windows system partition is untouched, you can copy EFI files from the partition.
Boot with Windows 10 installation media. Choose Repair your computer
. Start command prompt.
I'm using a Thinkpad T480 with GeForce MX150 dGPU option.
After the installation, Fedora 32 raises an error notification about nouveau
on every boot up.
To get rid of this, you have two choices. You can install official proprietary driver for NVIDIA GeForce GPU. The other option is disabling GeForce dGPU at all.
You can blacklist nouveau
to do that.
As of 2020-08-01, You can't install scilab via dnf/yum.
Can't install scilab - Discussions in English / on using Fedora - Ask Fedora
In order to use scilab, you can download tar ball from official web site.
Still you can't start scilab because of a shared library error.
If SPI flash isn't on the board, just remove the TF(microSD) card from the board and supply the power. It's the same if SPI flash is empty,
If your board have a SPI flash with preloaded image, pull D4(SPI CLK
) down to GND. You can use the metal part of USB micro B or TF card slot as GND. Diagram is in the comment below. Thanks: @ernestp for the correction and providing a diagram.
Or you can use the special boot image [link]. Just write it to a TF card and boot.
Don't forget to remove the GND connection after entering FEL mode otherwise you will never be able to write the boot image to the SPI flash.
If you can't compile your TeX document because of font not found
, you should install your user fonts System Wide by right-clicking the font files and selecting Install for all users
.
From Windows 10 2018 October Update (1809), font files will be installed to %USERPROFILE%/AppData/Local/Microsoft/Windows/Fonts
even if you copied your fonts to C:\Windows\fonts
on Explorer.
PostScript Core Font | URW Core35 | TeX Gyre | Liberation | croscore | TypeKit | Bitstream |
---|---|---|---|---|---|---|
Helvetica | Nimbus Sans | TeX Gyre Heros | Liberation Sans | Arimo | Nimbus Sans | Swiss 721 |
Helvetica Condensed | Liberation Sans Narrow | Nimbus Sans Condensed | Swiss 721 | |||
Times | Nimbus Roman | TeX Gyre Termes | Liberation Serif | Tinos | Nimbus Roman | Dutch 801 |
Courier | Nimbus Mono | TeX Gyre Cursor | Liberation Mono | Cousine | Courier |
| PostScript2 Core Font | URW Core35 | TeX Gyre | Liberation | croscore | TypeKit | Bitstream | |-------------------------|--------------|-------------------|------------------------|--------
If you installed opam
on Fedora 28, you might be surprised the fact that you can't do opam switch 4.0x.x
.
On Fedora 28, sudo dnf install opam
installs opam 2.0 beta (as of 2018-06-02).
Official Blog says that there are some changes to be aware of, including:
opam switch create is now needed to create new switches
Therefore, what you want to do should be like this: