.autobench.conf

# Autobench Configuration File

# host1, host2 
# The hostnames of the servers under test
# Eg. host1 = iis.test.com 
#     host2 = apache.test.com

host1 = WordPress 4.6 site                                                                 
host2 = WordPress 4.7 site                                                                  
                                                                                        
# uri1, uri2                                                                            
# The URI to test (relative to the document root).  For a fair comparison               
# the files should be identical (although the paths to them may differ on the           
# different hosts)                                                                      
                                                                                        
uri1  = /                                                                               
uri2  = /                                                                               
                                                                                        
# port1, port2                                                                          
# The port number on which the servers are listening                                    
                                                                                        
port1 = 80                                                                              
port2 = 80                                                                              
                                                                                        
# low_rate, high_rate, rate_step                                                        
# The 'rate' is the number of number of connections to open per second.                 
# A series of tests will be conducted, starting at low rate,                            
# increasing by rate step, and finishing at high_rate.                                  
# The default settings test at rates of 20,30,40,50...180,190,200                       
                                                                                        
low_rate  = 10                                                                          
high_rate = 50                                                                          
rate_step = 1                                                                           
                                                                                        
# num_conn, num_call                                                                    
# num_conn is the total number of connections to make during a test                     
# num_call is the number of requests per connection                                     
# The product of num_call and rate is the the approximate number of                     
# requests per second that will be attempted.                                           
                                                                                        
num_conn  = 250                                                                         
num_call  = 5                                                                           
                                                                                        
# timeout sets the maximimum time (in seconds) that httperf will wait                   
# for replies from the web server.  If the timeout is exceeded, the                     
# reply concerned is counted as an error.                                               
                                                                                        
timeout   = 5                                                                           
                                                                                        
# output_fmt
# sets the output type - may be either "csv", or "tsv";

output_fmt = tsv

## Config for distributed autobench (autobench_admin)
# clients  
# comma separated list of the hostnames and portnumbers for the
# autobench clients.  No whitespace can appear before or after the commas.
# clients = bench1.foo.com:4600,bench2.foo.com:4600,bench3.foo.com:4600

clients = localhost:4600