Skip to content

Instantly share code, notes, and snippets.

@srenauld

srenauld/atsamr34j18b.svd

Created August 30, 2019 20:19
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save srenauld/e3b0ab2cd435ae0a710266e2925d01ae to your computer and use it in GitHub Desktop.
Save srenauld/e3b0ab2cd435ae0a710266e2925d01ae to your computer and use it in GitHub Desktop.
Download ZIP
ATSAMR34J18B SVD
Raw
atsamr34j18b.svd
<?xml version="1.0" encoding="utf-8"?>
<device schemaVersion="1.2" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD.xsd">
<vendor>Microchip Technology Inc.</vendor>
<vendorID>MICROCHIP</vendorID>
<name>ATSAMR34J18B</name>
<series>SAMR34</series>
<version>B</version>
<description>Microchip ATSAMR34J18B device: Cortex-M0+ Microcontroller with 256KB Flash, 32KB SRAM, 1276-pin package</description>
<licenseText>
Copyright (c) 2018 Microchip Technology Inc.\n
\n
SPDX-License-Identifier: Apache-2.0\n
\n
Licensed under the Apache License, Version 2.0 (the "License");\n
you may not use this file except in compliance with the License.\n
You may obtain a copy of the License at\n
\n
http://www.apache.org/licenses/LICENSE-2.0\n
\n
Unless required by applicable law or agreed to in writing, software\n
distributed under the License is distributed on an "AS IS" BASIS,\n
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n
See the License for the specific language governing permissions and\n
limitations under the License.
</licenseText>
<cpu>
<name>CM0+</name>
<revision>r0p1</revision>
<endian>little</endian>
<mpuPresent>false</mpuPresent>
<fpuPresent>false</fpuPresent>
<vtorPresent>true</vtorPresent>
<nvicPrioBits>2</nvicPrioBits>
<vendorSystickConfig>false</vendorSystickConfig>
<deviceNumInterrupts>29</deviceNumInterrupts>
</cpu>
<headerSystemFilename>system_samr34</headerSystemFilename>
<addressUnitBits>8</addressUnitBits>
<width>32</width>
<size>32</size>
<access>read-write</access>
<resetValue>0x00000000</resetValue>
<resetMask>0xFFFFFFFF</resetMask>
<peripherals>
<peripheral>
<name>AC</name>
<version>1.0.1</version>
<description>Analog Comparators</description>
<groupName>AC</groupName>
<prependToName>AC_</prependToName>
<baseAddress>0x43001000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x40</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>AC</name>
<value>23</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x01</addressOffset>
<size>8</size>
<access>write-only</access>
<fields>
<field>
<name>START0</name>
<description>Comparator 0 Start Comparison</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START1</name>
<description>Comparator 1 Start Comparison</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x02</addressOffset>
<size>16</size>
<fields>
<field>
<name>COMPEO0</name>
<description>Comparator 0 Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMPEO1</name>
<description>Comparator 1 Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINEO0</name>
<description>Window 0 Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMPEI0</name>
<description>Comparator 0 Event Input Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMPEI1</name>
<description>Comparator 1 Event Input Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEI0</name>
<description>Comparator 0 Input Event Invert Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEI1</name>
<description>Comparator 1 Input Event Invert Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>COMP0</name>
<description>Comparator 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP1</name>
<description>Comparator 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WIN0</name>
<description>Window 0 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>COMP0</name>
<description>Comparator 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP1</name>
<description>Comparator 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WIN0</name>
<description>Window 0 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x06</addressOffset>
<size>8</size>
<fields>
<field>
<name>COMP0</name>
<description>Comparator 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COMP1</name>
<description>Comparator 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WIN0</name>
<description>Window 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSA</name>
<description>Status A</description>
<addressOffset>0x07</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>STATE0</name>
<description>Comparator 0 Current State</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STATE1</name>
<description>Comparator 1 Current State</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WSTATE0</name>
<description>Window 0 Current State</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>WSTATE0Select</name>
<enumeratedValue>
<name>ABOVE</name>
<description>Signal is above window</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>INSIDE</name>
<description>Signal is inside window</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BELOW</name>
<description>Signal is below window</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>STATUSB</name>
<description>Status B</description>
<addressOffset>0x08</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>READY0</name>
<description>Comparator 0 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>READY1</name>
<description>Comparator 1 Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x09</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WINCTRL</name>
<description>Window Control</description>
<addressOffset>0x0A</addressOffset>
<size>8</size>
<fields>
<field>
<name>WEN0</name>
<description>Window 0 Mode Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINTSEL0</name>
<description>Window 0 Interrupt Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WINTSEL0Select</name>
<enumeratedValue>
<name>ABOVE</name>
<description>Interrupt on signal above window</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>INSIDE</name>
<description>Interrupt on signal inside window</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BELOW</name>
<description>Interrupt on signal below window</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>OUTSIDE</name>
<description>Interrupt on signal outside window</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x1</dimIncrement>
<name>SCALER%s</name>
<description>Scaler n</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>VALUE</name>
<description>Scaler Value</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x4</dimIncrement>
<name>COMPCTRL%s</name>
<description>Comparator Control n</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SINGLE</name>
<description>Single-Shot Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INTSEL</name>
<description>Interrupt Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>INTSELSelect</name>
<enumeratedValue>
<name>TOGGLE</name>
<description>Interrupt on comparator output toggle</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING</name>
<description>Interrupt on comparator output rising</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING</name>
<description>Interrupt on comparator output falling</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EOC</name>
<description>Interrupt on end of comparison (single-shot mode only)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MUXNEG</name>
<description>Negative Input Mux Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MUXNEGSelect</name>
<enumeratedValue>
<name>PIN0</name>
<description>I/O pin 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN1</name>
<description>I/O pin 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN2</name>
<description>I/O pin 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN3</name>
<description>I/O pin 3</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>GND</name>
<description>Ground</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>VSCALE</name>
<description>VDD scaler</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>BANDGAP</name>
<description>Internal bandgap voltage</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DAC</name>
<description>DAC output</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MUXPOS</name>
<description>Positive Input Mux Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>MUXPOSSelect</name>
<enumeratedValue>
<name>PIN0</name>
<description>I/O pin 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN1</name>
<description>I/O pin 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN2</name>
<description>I/O pin 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PIN3</name>
<description>I/O pin 3</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>VSCALE</name>
<description>VDD Scaler</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>SWAP</name>
<description>Swap Inputs and Invert</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPEED</name>
<description>Speed Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPEEDSelect</name>
<enumeratedValue>
<name>LOW</name>
<description>Low speed</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MEDLOW</name>
<description>Medium low speed</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MEDHIGH</name>
<description>Medium high speed</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High speed</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>HYSTEN</name>
<description>Hysteresis Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HYST</name>
<description>Hysteresis Level</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>HYSTSelect</name>
<enumeratedValue>
<name>HYST50</name>
<description>50mV</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HYST70</name>
<description>70mV</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HYST90</name>
<description>90mV</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HYST110</name>
<description>110mV</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FLEN</name>
<description>Filter Length</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>FLENSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>No filtering</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MAJ3</name>
<description>3-bit majority function (2 of 3)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MAJ5</name>
<description>5-bit majority function (3 of 5)</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OUT</name>
<description>Output</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>OUTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>The output of COMPn is not routed to the COMPn I/O port</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ASYNC</name>
<description>The asynchronous output of COMPn is routed to the COMPn I/O port</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNC</name>
<description>The synchronous output (including filtering) of COMPn is routed to the COMPn I/O port</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WINCTRL</name>
<description>WINCTRL Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMPCTRL0</name>
<description>COMPCTRL 0 Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMPCTRL1</name>
<description>COMPCTRL 1 Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>ADC</name>
<version>1.1.1</version>
<description>Analog Digital Converter</description>
<groupName>ADC</groupName>
<prependToName>ADC_</prependToName>
<baseAddress>0x43000C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>ADC</name>
<value>22</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x01</addressOffset>
<size>8</size>
<fields>
<field>
<name>PRESCALER</name>
<description>Prescaler Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>Peripheral clock divided by 2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Peripheral clock divided by 4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Peripheral clock divided by 8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Peripheral clock divided by 16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Peripheral clock divided by 32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Peripheral clock divided by 64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Peripheral clock divided by 128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Peripheral clock divided by 256</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>REFCTRL</name>
<description>Reference Control</description>
<addressOffset>0x02</addressOffset>
<size>8</size>
<fields>
<field>
<name>REFSEL</name>
<description>Reference Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>REFSELSelect</name>
<enumeratedValue>
<name>INTREF</name>
<description>Internal Bandgap Reference</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>INTVCC0</name>
<description>1/1.6 VDDANA</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>INTVCC1</name>
<description>1/2 VDDANA</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>AREFA</name>
<description>External Reference</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>AREFB</name>
<description>External Reference</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>INTVCC2</name>
<description>VCCANA</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>REFCOMP</name>
<description>Reference Buffer Offset Compensation Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x03</addressOffset>
<size>8</size>
<fields>
<field>
<name>FLUSHEI</name>
<description>Flush Event Input Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTEI</name>
<description>Start Conversion Event Input Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FLUSHINV</name>
<description>Flush Event Invert Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTINV</name>
<description>Satrt Event Invert Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESRDYEO</name>
<description>Result Ready Event Out</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMONEO</name>
<description>Window Monitor Event Out</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>RESRDY</name>
<description>Result Ready Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN</name>
<description>Overrun Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMON</name>
<description>Window Monitor Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>RESRDY</name>
<description>Result Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN</name>
<description>Overrun Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMON</name>
<description>Window Monitor Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x06</addressOffset>
<size>8</size>
<fields>
<field>
<name>RESRDY</name>
<description>Result Ready Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVERRUN</name>
<description>Overrun Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WINMON</name>
<description>Window Monitor Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SEQSTATUS</name>
<description>Sequence Status</description>
<addressOffset>0x07</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>SEQSTATE</name>
<description>Sequence State</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SEQBUSY</name>
<description>Sequence Busy</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>INPUTCTRL</name>
<description>Input Control</description>
<addressOffset>0x08</addressOffset>
<size>16</size>
<fields>
<field>
<name>MUXPOS</name>
<description>Positive Mux Input Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>MUXPOSSelect</name>
<enumeratedValue>
<name>AIN0</name>
<description>ADC AIN0 Pin</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN1</name>
<description>ADC AIN1 Pin</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN2</name>
<description>ADC AIN2 Pin</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN3</name>
<description>ADC AIN3 Pin</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN4</name>
<description>ADC AIN4 Pin</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN5</name>
<description>ADC AIN5 Pin</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN6</name>
<description>ADC AIN6 Pin</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN7</name>
<description>ADC AIN7 Pin</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN8</name>
<description>ADC AIN8 Pin</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN9</name>
<description>ADC AIN9 Pin</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN10</name>
<description>ADC AIN10 Pin</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN11</name>
<description>ADC AIN11 Pin</description>
<value>0xb</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN12</name>
<description>ADC AIN12 Pin</description>
<value>0xc</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN13</name>
<description>ADC AIN13 Pin</description>
<value>0xd</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN14</name>
<description>ADC AIN14 Pin</description>
<value>0xe</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN15</name>
<description>ADC AIN15 Pin</description>
<value>0xf</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN16</name>
<description>ADC AIN16 Pin</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN17</name>
<description>ADC AIN17 Pin</description>
<value>0x11</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN18</name>
<description>ADC AIN18 Pin</description>
<value>0x12</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN19</name>
<description>ADC AIN19 Pin</description>
<value>0x13</value>
</enumeratedValue>
<enumeratedValue>
<name>TEMP</name>
<description>Temperature Sensor</description>
<value>0x18</value>
</enumeratedValue>
<enumeratedValue>
<name>BANDGAP</name>
<description>Bandgap Voltage</description>
<value>0x19</value>
</enumeratedValue>
<enumeratedValue>
<name>SCALEDCOREVCC</name>
<description>1/4 Scaled Core Supply</description>
<value>0x1a</value>
</enumeratedValue>
<enumeratedValue>
<name>SCALEDIOVCC</name>
<description>1/4 Scaled I/O Supply</description>
<value>0x1b</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MUXNEG</name>
<description>Negative Mux Input Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>MUXNEGSelect</name>
<enumeratedValue>
<name>AIN0</name>
<description>ADC AIN0 Pin</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN1</name>
<description>ADC AIN1 Pin</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN2</name>
<description>ADC AIN2 Pin</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN3</name>
<description>ADC AIN3 Pin</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN4</name>
<description>ADC AIN4 Pin</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AIN5</name>
<description>ADC AIN5 Pin</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>GND</name>
<description>Internal ground</description>
<value>0x18</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLC</name>
<description>Control C</description>
<addressOffset>0x0A</addressOffset>
<size>16</size>
<fields>
<field>
<name>DIFFMODE</name>
<description>Differential Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LEFTADJ</name>
<description>Left-Adjusted Result</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FREERUN</name>
<description>Free Running Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CORREN</name>
<description>Digital Correction Logic Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESSEL</name>
<description>Conversion Result Resolution</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RESSELSelect</name>
<enumeratedValue>
<name>12BIT</name>
<description>12-bit result</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16BIT</name>
<description>For averaging mode output</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>10BIT</name>
<description>10-bit result</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8BIT</name>
<description>8-bit result</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WINMODE</name>
<description>Window Monitor Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>WINMODESelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>No window mode (default)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE1</name>
<description>RESULT &gt; WINLT</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE2</name>
<description>RESULT &lt; WINUT</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE3</name>
<description>WINLT &lt; RESULT &lt; WINUT</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>MODE4</name>
<description>!(WINLT &lt; RESULT &lt; WINUT)</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>AVGCTRL</name>
<description>Average Control</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>SAMPLENUM</name>
<description>Number of Samples to be Collected</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>SAMPLENUMSelect</name>
<enumeratedValue>
<name>1</name>
<description>1 sample</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>2 samples</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>4</name>
<description>4 samples</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8 samples</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 samples</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 samples</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 samples</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 samples</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 samples</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 samples</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 samples</description>
<value>0xa</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ADJRES</name>
<description>Adjusting Result / Division Coefficient</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>SAMPCTRL</name>
<description>Sample Time Control</description>
<addressOffset>0x0D</addressOffset>
<size>8</size>
<fields>
<field>
<name>SAMPLEN</name>
<description>Sampling Time Length</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>OFFCOMP</name>
<description>Comparator Offset Compensation Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WINLT</name>
<description>Window Monitor Lower Threshold</description>
<addressOffset>0x0E</addressOffset>
<size>16</size>
<fields>
<field>
<name>WINLT</name>
<description>Window Lower Threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>WINUT</name>
<description>Window Monitor Upper Threshold</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<fields>
<field>
<name>WINUT</name>
<description>Window Upper Threshold</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>GAINCORR</name>
<description>Gain Correction</description>
<addressOffset>0x12</addressOffset>
<size>16</size>
<fields>
<field>
<name>GAINCORR</name>
<description>Gain Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>OFFSETCORR</name>
<description>Offset Correction</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<fields>
<field>
<name>OFFSETCORR</name>
<description>Offset Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWTRIG</name>
<description>Software Trigger</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<fields>
<field>
<name>FLUSH</name>
<description>ADC Flush</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>START</name>
<description>Start ADC Conversion</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x1C</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x20</addressOffset>
<size>16</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>SWRST Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>ENABLE Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>INPUTCTRL</name>
<description>INPUTCTRL Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTRLC</name>
<description>CTRLC Synchronization Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>AVGCTRL</name>
<description>AVGCTRL Synchronization Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SAMPCTRL</name>
<description>SAMPCTRL Synchronization Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WINLT</name>
<description>WINLT Synchronization Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WINUT</name>
<description>WINUT Synchronization Busy</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GAINCORR</name>
<description>GAINCORR Synchronization Busy</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OFFSETCORR</name>
<description>OFFSETCTRL Synchronization Busy</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SWTRIG</name>
<description>SWTRG Synchronization Busy</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RESULT</name>
<description>Result</description>
<addressOffset>0x24</addressOffset>
<size>16</size>
<access>read-only</access>
<fields>
<field>
<name>RESULT</name>
<description>Result Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SEQCTRL</name>
<description>Sequence Control</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<fields>
<field>
<name>SEQEN</name>
<description>Enable Positive Input in the Sequence</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CALIB</name>
<description>Calibration</description>
<addressOffset>0x2C</addressOffset>
<size>16</size>
<fields>
<field>
<name>BIASCOMP</name>
<description>Bias Comparator Scaling</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>BIASREFBUF</name>
<description>Bias Reference Buffer Scaling</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>AES</name>
<version>2.0.0</version>
<description>Advanced Encryption Standard</description>
<groupName>AES</groupName>
<prependToName>AES_</prependToName>
<baseAddress>0x42003400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x100</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>AES</name>
<value>26</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AESMODE</name>
<description>AES Modes of operation</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>CFBS</name>
<description>CFB Types</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>KEYSIZE</name>
<description>Keysize</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CIPHER</name>
<description>Cipher mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTMODE</name>
<description>Start mode</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOD</name>
<description>LOD Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>KEYGEN</name>
<description>Last key generation</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XORKEY</name>
<description>Xor Key operation</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTYPE</name>
<description>Counter measure types</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>START</name>
<description>Manual Start</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NEWMSG</name>
<description>New message</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EOM</name>
<description>End of message</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFMUL</name>
<description>GF Multiplication</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>ENCCMP</name>
<description>Encryption Complete</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFMCMP</name>
<description>GF Multiplication Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x06</addressOffset>
<size>8</size>
<fields>
<field>
<name>ENCCMP</name>
<description>Encryption Complete</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFMCMP</name>
<description>GF Multiplication Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status</description>
<addressOffset>0x07</addressOffset>
<size>8</size>
<fields>
<field>
<name>ENCCMP</name>
<description>Encryption Complete</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GFMCMP</name>
<description>GF Multiplication Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATABUFPTR</name>
<description>Data buffer pointer</description>
<addressOffset>0x08</addressOffset>
<size>8</size>
<fields>
<field>
<name>INDATAPTR</name>
<description>Input Data Pointer</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug control</description>
<addressOffset>0x09</addressOffset>
<size>8</size>
<access>write-only</access>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x4</dimIncrement>
<name>KEYWORD%s</name>
<description>Keyword n</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<access>write-only</access>
</register>
<register>
<name>INDATA</name>
<description>Indata</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>INTVECTV%s</name>
<description>Initialisation Vector n</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<access>write-only</access>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>HASHKEY%s</name>
<description>Hash key n</description>
<addressOffset>0x5C</addressOffset>
<size>32</size>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>GHASH%s</name>
<description>Galois Hash n</description>
<addressOffset>0x6C</addressOffset>
<size>32</size>
</register>
<register>
<name>CIPLEN</name>
<description>Cipher Length</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
</register>
<register>
<name>RANDSEED</name>
<description>Random Seed</description>
<addressOffset>0x84</addressOffset>
<size>32</size>
</register>
</registers>
</peripheral>
<peripheral>
<name>CCL</name>
<version>1.0.1</version>
<description>Configurable Custom Logic</description>
<groupName>CCL</groupName>
<prependToName>CCL_</prependToName>
<baseAddress>0x43001C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x40</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CTRL</name>
<description>Control</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x1</dimIncrement>
<name>SEQCTRL%s</name>
<description>SEQ Control x</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<fields>
<field>
<name>SEQSEL</name>
<description>Sequential Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>SEQSELSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Sequential logic is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DFF</name>
<description>D flip flop</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>JK</name>
<description>JK flip flop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>LATCH</name>
<description>D latch</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>RS</name>
<description>RS latch</description>
<value>0x4</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>LUTCTRL%s</name>
<description>LUT Control x</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>LUT Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FILTSEL</name>
<description>Filter Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>FILTSELSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Filter disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SYNCH</name>
<description>Synchronizer enabled</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FILTER</name>
<description>Filter enabled</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EDGESEL</name>
<description>Edge Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INSEL0</name>
<description>Input Selection 0</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>INSEL0Select</name>
<enumeratedValue>
<name>MASK</name>
<description>Masked input</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FEEDBACK</name>
<description>Feedback input source</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LINK</name>
<description>Linked LUT input source</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>EVENT</name>
<description>Event in put source</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>IO</name>
<description>I/O pin input source</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>AC</name>
<description>AC input source</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>TC</name>
<description>TC input source</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>ALTTC</name>
<description>Alternate TC input source</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>TCC</name>
<description>TCC input source</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>SERCOM</name>
<description>SERCOM inout source</description>
<value>0x9</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>INSEL1</name>
<description>Input Selection 1</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>INSEL2</name>
<description>Input Selection 2</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>INVEI</name>
<description>Input Event Invert</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUTEI</name>
<description>Event Input Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUTEO</name>
<description>Event Output Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRUTH</name>
<description>Truth Value</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DAC</name>
<version>1.1.2</version>
<description>Digital-to-Analog Converter</description>
<groupName>DAC</groupName>
<prependToName>DAC_</prependToName>
<baseAddress>0x42003000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x20</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DAC</name>
<value>24</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable DAC Controller</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x01</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIFF</name>
<description>Differential mode enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFSEL</name>
<description>Reference Selection for DAC0/1</description>
<bitOffset>1</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>REFSELSelect</name>
<enumeratedValue>
<name>VREFPU</name>
<description>External reference unbuffered</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>VDDANA</name>
<description>Analog supply</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>VREFPB</name>
<description>External reference buffered</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>INTREF</name>
<description>Internal bandgap reference</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x02</addressOffset>
<size>8</size>
<fields>
<field>
<name>STARTEI0</name>
<description>Start Conversion Event Input DAC 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTEI1</name>
<description>Start Conversion Event Input DAC 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTYEO0</name>
<description>Data Buffer Empty Event Output DAC 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTYEO1</name>
<description>Data Buffer Empty Event Output DAC 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEI0</name>
<description>Enable Invertion of DAC 0 input event</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEI1</name>
<description>Enable Invertion of DAC 1 input event</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>UNDERRUN0</name>
<description>Underrun Interrupt Enable for DAC 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNDERRUN1</name>
<description>Underrun Interrupt Enable for DAC 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY0</name>
<description>Data Buffer 0 Empty Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY1</name>
<description>Data Buffer 1 Empty Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>UNDERRUN0</name>
<description>Underrun Interrupt Enable for DAC 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNDERRUN1</name>
<description>Underrun Interrupt Enable for DAC 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY0</name>
<description>Data Buffer 0 Empty Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY1</name>
<description>Data Buffer 1 Empty Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x06</addressOffset>
<size>8</size>
<fields>
<field>
<name>UNDERRUN0</name>
<description>DAC 0 Underrun</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UNDERRUN1</name>
<description>DAC 1 Underrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY0</name>
<description>Data Buffer 0 Empty</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EMPTY1</name>
<description>Data Buffer 1 Empty</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x07</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>READY0</name>
<description>DAC 0 Startup Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>READY1</name>
<description>DAC 1 Startup Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC0</name>
<description>DAC 0 End of Conversion</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EOC1</name>
<description>DAC 1 End of Conversion</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>DAC Enable Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATA0</name>
<description>Data DAC 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATA1</name>
<description>Data DAC 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATABUF0</name>
<description>Data Buffer DAC 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DATABUF1</name>
<description>Data Buffer DAC 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x2</dimIncrement>
<name>DACCTRL%s</name>
<description>DAC n Control</description>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>LEFTADJ</name>
<description>Left Adjusted Data</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable DAC0</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCTRL</name>
<description>Current Control</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CCTRLSelect</name>
<enumeratedValue>
<name>CC100K</name>
<description>GCLK_DAC &lt;= 1.2MHz (100kSPS)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CC1M</name>
<description>1.2MHz &lt; GCLK_DAC &lt;= 6MHz (500kSPS)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CC12M</name>
<description>6MHz &lt; GCLK_DAC &lt;=12MHz (1MSPS)</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DITHER</name>
<description>Dithering Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFRESH</name>
<description>Refresh period</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x2</dimIncrement>
<name>DATA%s</name>
<description>DAC n Data</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<access>write-only</access>
<fields>
<field>
<name>DATA</name>
<description>DAC0 Data</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x2</dimIncrement>
<name>DATABUF%s</name>
<description>DAC n Data Buffer</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<access>write-only</access>
<fields>
<field>
<name>DATABUF</name>
<description>DAC0 Data Buffer</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DMAC</name>
<version>2.2.2</version>
<description>Direct Memory Access Controller</description>
<groupName>DMAC</groupName>
<prependToName>DMAC_</prependToName>
<baseAddress>0x44000400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>DMAC</name>
<value>5</value>
</interrupt>
<registers>
<register>
<name>CTRL</name>
<description>Control</description>
<addressOffset>0x00</addressOffset>
<size>16</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAENABLE</name>
<description>DMA Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCENABLE</name>
<description>CRC Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEN0</name>
<description>Priority Level 0 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEN1</name>
<description>Priority Level 1 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEN2</name>
<description>Priority Level 2 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLEN3</name>
<description>Priority Level 3 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCCTRL</name>
<description>CRC Control</description>
<addressOffset>0x02</addressOffset>
<size>16</size>
<fields>
<field>
<name>CRCBEATSIZE</name>
<description>CRC Beat Size</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CRCBEATSIZESelect</name>
<enumeratedValue>
<name>BYTE</name>
<description>8-bit bus transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HWORD</name>
<description>16-bit bus transfer</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>WORD</name>
<description>32-bit bus transfer</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CRCPOLY</name>
<description>CRC Polynomial Type</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CRCPOLYSelect</name>
<enumeratedValue>
<name>CRC16</name>
<description>CRC-16 (CRC-CCITT)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CRC32</name>
<description>CRC32 (IEEE 802.3)</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CRCSRC</name>
<description>CRC Input Source</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<enumeratedValues>
<name>CRCSRCSelect</name>
<enumeratedValue>
<name>NOACT</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>IO</name>
<description>I/O interface</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CRCDATAIN</name>
<description>CRC Data Input</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>CRCDATAIN</name>
<description>CRC Data Input</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCCHKSUM</name>
<description>CRC Checksum</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<fields>
<field>
<name>CRCCHKSUM</name>
<description>CRC Checksum</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CRCSTATUS</name>
<description>CRC Status</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>CRCBUSY</name>
<description>CRC Module Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRCZERO</name>
<description>CRC Zero</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x0D</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Run</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>QOSCTRL</name>
<description>QOS Control</description>
<addressOffset>0x0E</addressOffset>
<size>8</size>
<resetValue>0x2A</resetValue>
<fields>
<field>
<name>WRBQOS</name>
<description>Write-Back Quality of Service</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WRBQOSSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Background (no sensitive operation)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Sensitive Bandwidth</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MEDIUM</name>
<description>Sensitive Latency</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Critical Latency</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FQOS</name>
<description>Fetch Quality of Service</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>FQOSSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Background (no sensitive operation)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Sensitive Bandwidth</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MEDIUM</name>
<description>Sensitive Latency</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Critical Latency</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DQOS</name>
<description>Data Transfer Quality of Service</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>DQOSSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Background (no sensitive operation)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Sensitive Bandwidth</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MEDIUM</name>
<description>Sensitive Latency</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>Critical Latency</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SWTRIGCTRL</name>
<description>Software Trigger Control</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWTRIG0</name>
<description>Channel 0 Software Trigger</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG1</name>
<description>Channel 1 Software Trigger</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG2</name>
<description>Channel 2 Software Trigger</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG3</name>
<description>Channel 3 Software Trigger</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG4</name>
<description>Channel 4 Software Trigger</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG5</name>
<description>Channel 5 Software Trigger</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG6</name>
<description>Channel 6 Software Trigger</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG7</name>
<description>Channel 7 Software Trigger</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG8</name>
<description>Channel 8 Software Trigger</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG9</name>
<description>Channel 9 Software Trigger</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG10</name>
<description>Channel 10 Software Trigger</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG11</name>
<description>Channel 11 Software Trigger</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG12</name>
<description>Channel 12 Software Trigger</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG13</name>
<description>Channel 13 Software Trigger</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG14</name>
<description>Channel 14 Software Trigger</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWTRIG15</name>
<description>Channel 15 Software Trigger</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PRICTRL0</name>
<description>Priority Control 0</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>LVLPRI0</name>
<description>Level 0 Channel Priority Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RRLVLEN0</name>
<description>Level 0 Round-Robin Scheduling Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLPRI1</name>
<description>Level 1 Channel Priority Number</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RRLVLEN1</name>
<description>Level 1 Round-Robin Scheduling Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLPRI2</name>
<description>Level 2 Channel Priority Number</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RRLVLEN2</name>
<description>Level 2 Round-Robin Scheduling Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVLPRI3</name>
<description>Level 3 Channel Priority Number</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>RRLVLEN3</name>
<description>Level 3 Round-Robin Scheduling Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTPEND</name>
<description>Interrupt Pending</description>
<addressOffset>0x20</addressOffset>
<size>16</size>
<fields>
<field>
<name>ID</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>TERR</name>
<description>Transfer Error</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCMPL</name>
<description>Transfer Complete</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Channel Suspend</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FERR</name>
<description>Fetch Error</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY</name>
<description>Busy</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PEND</name>
<description>Pending</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>INTSTATUS</name>
<description>Interrupt Status</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>CHINT0</name>
<description>Channel 0 Pending Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT1</name>
<description>Channel 1 Pending Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT2</name>
<description>Channel 2 Pending Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT3</name>
<description>Channel 3 Pending Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT4</name>
<description>Channel 4 Pending Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT5</name>
<description>Channel 5 Pending Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT6</name>
<description>Channel 6 Pending Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT7</name>
<description>Channel 7 Pending Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT8</name>
<description>Channel 8 Pending Interrupt</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT9</name>
<description>Channel 9 Pending Interrupt</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT10</name>
<description>Channel 10 Pending Interrupt</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT11</name>
<description>Channel 11 Pending Interrupt</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT12</name>
<description>Channel 12 Pending Interrupt</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT13</name>
<description>Channel 13 Pending Interrupt</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT14</name>
<description>Channel 14 Pending Interrupt</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHINT15</name>
<description>Channel 15 Pending Interrupt</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>BUSYCH</name>
<description>Busy Channels</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>BUSYCH0</name>
<description>Busy Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH1</name>
<description>Busy Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH2</name>
<description>Busy Channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH3</name>
<description>Busy Channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH4</name>
<description>Busy Channel 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH5</name>
<description>Busy Channel 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH6</name>
<description>Busy Channel 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH7</name>
<description>Busy Channel 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH8</name>
<description>Busy Channel 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH9</name>
<description>Busy Channel 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH10</name>
<description>Busy Channel 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH11</name>
<description>Busy Channel 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH12</name>
<description>Busy Channel 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH13</name>
<description>Busy Channel 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH14</name>
<description>Busy Channel 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSYCH15</name>
<description>Busy Channel 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PENDCH</name>
<description>Pending Channels</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>PENDCH0</name>
<description>Pending Channel 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH1</name>
<description>Pending Channel 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH2</name>
<description>Pending Channel 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH3</name>
<description>Pending Channel 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH4</name>
<description>Pending Channel 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH5</name>
<description>Pending Channel 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH6</name>
<description>Pending Channel 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH7</name>
<description>Pending Channel 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH8</name>
<description>Pending Channel 8</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH9</name>
<description>Pending Channel 9</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH10</name>
<description>Pending Channel 10</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH11</name>
<description>Pending Channel 11</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH12</name>
<description>Pending Channel 12</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH13</name>
<description>Pending Channel 13</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH14</name>
<description>Pending Channel 14</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PENDCH15</name>
<description>Pending Channel 15</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ACTIVE</name>
<description>Active Channel and Levels</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>LVLEX0</name>
<description>Level 0 Channel Trigger Request Executing</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LVLEX1</name>
<description>Level 1 Channel Trigger Request Executing</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LVLEX2</name>
<description>Level 2 Channel Trigger Request Executing</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LVLEX3</name>
<description>Level 3 Channel Trigger Request Executing</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ID</name>
<description>Active Channel ID</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ABUSY</name>
<description>Active Channel Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BTCNT</name>
<description>Active Channel Block Transfer Count</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>BASEADDR</name>
<description>Descriptor Memory Section Base Address</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<fields>
<field>
<name>BASEADDR</name>
<description>Descriptor Memory Base Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>WRBADDR</name>
<description>Write-Back Memory Section Base Address</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<fields>
<field>
<name>WRBADDR</name>
<description>Write-Back Memory Base Address</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHID</name>
<description>Channel ID</description>
<addressOffset>0x3F</addressOffset>
<size>8</size>
<fields>
<field>
<name>ID</name>
<description>Channel ID</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHCTRLA</name>
<description>Channel Control A</description>
<addressOffset>0x40</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Channel Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Channel Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Channel run in standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHCTRLB</name>
<description>Channel Control B</description>
<addressOffset>0x44</addressOffset>
<size>32</size>
<fields>
<field>
<name>EVACT</name>
<description>Event Input Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>NOACT</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>TRIG</name>
<description>Transfer and periodic transfer trigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CTRIG</name>
<description>Conditional transfer trigger</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CBLOCK</name>
<description>Conditional block transfer</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>Channel suspend operation</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>RESUME</name>
<description>Channel resume operation</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>SSKIP</name>
<description>Skip next block suspend action</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EVIE</name>
<description>Channel Event Input Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVOE</name>
<description>Channel Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LVL</name>
<description>Channel Arbitration Level</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>TRIGSRC</name>
<description>Trigger Source</description>
<bitOffset>8</bitOffset>
<bitWidth>6</bitWidth>
<enumeratedValues>
<name>TRIGSRCSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Only software/event triggers</description>
<value>0x0</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TRIGACT</name>
<description>Trigger Action</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>TRIGACTSelect</name>
<enumeratedValue>
<name>BLOCK</name>
<description>One trigger required for each block transfer</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BEAT</name>
<description>One trigger required for each beat transfer</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>TRANSACTION</name>
<description>One trigger required for each transaction</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMD</name>
<description>Software Command</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NOACT</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>Channel suspend operation</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESUME</name>
<description>Channel resume operation</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CHINTENCLR</name>
<description>Channel Interrupt Enable Clear</description>
<addressOffset>0x4C</addressOffset>
<size>8</size>
<fields>
<field>
<name>TERR</name>
<description>Channel Transfer Error Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCMPL</name>
<description>Channel Transfer Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Channel Suspend Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHINTENSET</name>
<description>Channel Interrupt Enable Set</description>
<addressOffset>0x4D</addressOffset>
<size>8</size>
<fields>
<field>
<name>TERR</name>
<description>Channel Transfer Error Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCMPL</name>
<description>Channel Transfer Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Channel Suspend Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHINTFLAG</name>
<description>Channel Interrupt Flag Status and Clear</description>
<addressOffset>0x4E</addressOffset>
<size>8</size>
<fields>
<field>
<name>TERR</name>
<description>Channel Transfer Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCMPL</name>
<description>Channel Transfer Complete</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUSP</name>
<description>Channel Suspend</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CHSTATUS</name>
<description>Channel Status</description>
<addressOffset>0x4F</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>PEND</name>
<description>Channel Pending</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSY</name>
<description>Channel Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FERR</name>
<description>Channel Fetch Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>DSU</name>
<version>2.5.0</version>
<description>Device Service Unit</description>
<groupName>DSU</groupName>
<prependToName>DSU_</prependToName>
<baseAddress>0x41002000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x2000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CTRL</name>
<description>Control</description>
<addressOffset>0x0000</addressOffset>
<size>8</size>
<access>write-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CRC</name>
<description>32-bit Cyclic Redundancy Code</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>MBIST</name>
<description>Memory built-in self-test</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CE</name>
<description>Chip-Erase</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ARR</name>
<description>Auxiliary Row Read</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SMSA</name>
<description>Start Memory Stream Access</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>STATUSA</name>
<description>Status A</description>
<addressOffset>0x0001</addressOffset>
<size>8</size>
<fields>
<field>
<name>DONE</name>
<description>Done</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CRSTEXT</name>
<description>CPU Reset Phase Extension</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BERR</name>
<description>Bus Error</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAIL</name>
<description>Failure</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Protection Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSB</name>
<description>Status B</description>
<addressOffset>0x0002</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>PROT</name>
<description>Protected</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DBGPRES</name>
<description>Debugger Present</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCCD0</name>
<description>Debug Communication Channel 0 Dirty</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCCD1</name>
<description>Debug Communication Channel 1 Dirty</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPE</name>
<description>Hot-Plugging Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>Address</description>
<addressOffset>0x0004</addressOffset>
<size>32</size>
<fields>
<field>
<name>AMOD</name>
<description>Access Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>ADDR</name>
<description>Address</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
<register>
<name>LENGTH</name>
<description>Length</description>
<addressOffset>0x0008</addressOffset>
<size>32</size>
<fields>
<field>
<name>LENGTH</name>
<description>Length</description>
<bitOffset>2</bitOffset>
<bitWidth>30</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>Data</description>
<addressOffset>0x000C</addressOffset>
<size>32</size>
<fields>
<field>
<name>DATA</name>
<description>Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x4</dimIncrement>
<name>DCC%s</name>
<description>Debug Communication Channel n</description>
<addressOffset>0x0010</addressOffset>
<size>32</size>
<fields>
<field>
<name>DATA</name>
<description>Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>DID</name>
<description>Device Identification</description>
<addressOffset>0x0018</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x10810228</resetValue>
<fields>
<field>
<name>DEVSEL</name>
<description>Device Select</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
<field>
<name>REVISION</name>
<description>Revision Number</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIE</name>
<description>Die Number</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SERIES</name>
<description>Series</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>SERIESSelect</name>
<enumeratedValue>
<name>0</name>
<description>Cortex-M0+ processor, basic feature set</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>Cortex-M0+ processor, USB</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FAMILY</name>
<description>Family</description>
<bitOffset>23</bitOffset>
<bitWidth>5</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>FAMILYSelect</name>
<enumeratedValue>
<name>0</name>
<description>General purpose microcontroller</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>PicoPower</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PROCESSOR</name>
<description>Processor</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>PROCESSORSelect</name>
<enumeratedValue>
<name>0</name>
<description>Cortex-M0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>Cortex-M0+</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>Cortex-M3</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>3</name>
<description>Cortex-M4</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x4</dimIncrement>
<name>DCFG%s</name>
<description>Device Configuration</description>
<addressOffset>0x00F0</addressOffset>
<size>32</size>
<fields>
<field>
<name>DCFG</name>
<description>Device Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>ENTRY0</name>
<description>Coresight ROM Table Entry 0</description>
<addressOffset>0x1000</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x9F0FC002</resetValue>
<fields>
<field>
<name>EPRES</name>
<description>Entry Present</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FMT</name>
<description>Format</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ADDOFF</name>
<description>Address Offset</description>
<bitOffset>12</bitOffset>
<bitWidth>20</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ENTRY1</name>
<description>Coresight ROM Table Entry 1</description>
<addressOffset>0x1004</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00003002</resetValue>
</register>
<register>
<name>END</name>
<description>Coresight ROM Table End</description>
<addressOffset>0x1008</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>END</name>
<description>End Marker</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>MEMTYPE</name>
<description>Coresight ROM Table Memory Type</description>
<addressOffset>0x1FCC</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SMEMP</name>
<description>System Memory Present</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PID4</name>
<description>Peripheral Identification 4</description>
<addressOffset>0x1FD0</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>JEPCC</name>
<description>JEP-106 Continuation Code</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FKBC</name>
<description>4KB count</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PID5</name>
<description>Peripheral Identification 5</description>
<addressOffset>0x1FD4</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID6</name>
<description>Peripheral Identification 6</description>
<addressOffset>0x1FD8</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID7</name>
<description>Peripheral Identification 7</description>
<addressOffset>0x1FDC</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID0</name>
<description>Peripheral Identification 0</description>
<addressOffset>0x1FE0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000D0</resetValue>
<fields>
<field>
<name>PARTNBL</name>
<description>Part Number Low</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PID1</name>
<description>Peripheral Identification 1</description>
<addressOffset>0x1FE4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000FC</resetValue>
<fields>
<field>
<name>PARTNBH</name>
<description>Part Number High</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>JEPIDCL</name>
<description>Low part of the JEP-106 Identity Code</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PID2</name>
<description>Peripheral Identification 2</description>
<addressOffset>0x1FE8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000009</resetValue>
<fields>
<field>
<name>JEPIDCH</name>
<description>JEP-106 Identity Code High</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>JEPU</name>
<description>JEP-106 Identity Code is used</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>REVISION</name>
<description>Revision Number</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>PID3</name>
<description>Peripheral Identification 3</description>
<addressOffset>0x1FEC</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>CUSMOD</name>
<description>ARM CUSMOD</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>REVAND</name>
<description>Revision Number</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CID0</name>
<description>Component Identification 0</description>
<addressOffset>0x1FF0</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x0000000D</resetValue>
<fields>
<field>
<name>PREAMBLEB0</name>
<description>Preamble Byte 0</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CID1</name>
<description>Component Identification 1</description>
<addressOffset>0x1FF4</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000010</resetValue>
<fields>
<field>
<name>PREAMBLE</name>
<description>Preamble</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CCLASS</name>
<description>Component Class</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CID2</name>
<description>Component Identification 2</description>
<addressOffset>0x1FF8</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000005</resetValue>
<fields>
<field>
<name>PREAMBLEB2</name>
<description>Preamble Byte 2</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CID3</name>
<description>Component Identification 3</description>
<addressOffset>0x1FFC</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x000000B1</resetValue>
<fields>
<field>
<name>PREAMBLEB3</name>
<description>Preamble Byte 3</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>EIC</name>
<version>2.0.2</version>
<description>External Interrupt Controller</description>
<groupName>EIC</groupName>
<prependToName>EIC_</prependToName>
<baseAddress>0x40002400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x40</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>EIC</name>
<value>3</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CKSEL</name>
<description>Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>NMICTRL</name>
<description>NMI Control</description>
<addressOffset>0x01</addressOffset>
<size>8</size>
<fields>
<field>
<name>NMISENSE</name>
<description>NMI Input Sense Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>NMISENSESelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NMIFILTEN</name>
<description>NMI Filter Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NMIASYNCH</name>
<description>NMI Asynchronous edge Detection Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>NMIFLAG</name>
<description>NMI Interrupt Flag</description>
<addressOffset>0x02</addressOffset>
<size>16</size>
<fields>
<field>
<name>NMI</name>
<description>NMI Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Syncbusy register</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software reset synchronisation</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable synchronisation</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<fields>
<field>
<name>EXTINTEO</name>
<description>External Interrupt Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<fields>
<field>
<name>EXTINT</name>
<description>External Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>EXTINT</name>
<description>External Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>EXTINT</name>
<description>External Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>ASYNCH</name>
<description>EIC Asynchronous edge Detection Enable</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>ASYNCH</name>
<description>EIC Asynchronous edge Detection Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x4</dimIncrement>
<name>CONFIG%s</name>
<description>Configuration n</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>SENSE0</name>
<description>Input Sense Configuration 0</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE0Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN0</name>
<description>Filter Enable 0</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE1</name>
<description>Input Sense Configuration 1</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE1Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN1</name>
<description>Filter Enable 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE2</name>
<description>Input Sense Configuration 2</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE2Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN2</name>
<description>Filter Enable 2</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE3</name>
<description>Input Sense Configuration 3</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE3Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN3</name>
<description>Filter Enable 3</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE4</name>
<description>Input Sense Configuration 4</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE4Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN4</name>
<description>Filter Enable 4</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE5</name>
<description>Input Sense Configuration 5</description>
<bitOffset>20</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE5Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN5</name>
<description>Filter Enable 5</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE6</name>
<description>Input Sense Configuration 6</description>
<bitOffset>24</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE6Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN6</name>
<description>Filter Enable 6</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SENSE7</name>
<description>Input Sense Configuration 7</description>
<bitOffset>28</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SENSE7Select</name>
<enumeratedValue>
<name>NONE</name>
<description>No detection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Rising edge detection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Falling edge detection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Both edges detection</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>HIGH</name>
<description>High level detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW</name>
<description>Low level detection</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FILTEN7</name>
<description>Filter Enable 7</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>EVSYS</name>
<version>1.0.1</version>
<description>Event System Interface</description>
<groupName>EVSYS</groupName>
<prependToName>EVSYS_</prependToName>
<baseAddress>0x43000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>EVSYS</name>
<value>7</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>CHSTATUS</name>
<description>Channel Status</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>USRRDY0</name>
<description>Channel 0 User Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY1</name>
<description>Channel 1 User Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY2</name>
<description>Channel 2 User Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY3</name>
<description>Channel 3 User Ready</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY4</name>
<description>Channel 4 User Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY5</name>
<description>Channel 5 User Ready</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY6</name>
<description>Channel 6 User Ready</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY7</name>
<description>Channel 7 User Ready</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY8</name>
<description>Channel 8 User Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY9</name>
<description>Channel 9 User Ready</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY10</name>
<description>Channel 10 User Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>USRRDY11</name>
<description>Channel 11 User Ready</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY0</name>
<description>Channel 0 Busy</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY1</name>
<description>Channel 1 Busy</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY2</name>
<description>Channel 2 Busy</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY3</name>
<description>Channel 3 Busy</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY4</name>
<description>Channel 4 Busy</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY5</name>
<description>Channel 5 Busy</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY6</name>
<description>Channel 6 Busy</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY7</name>
<description>Channel 7 Busy</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY8</name>
<description>Channel 8 Busy</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY9</name>
<description>Channel 9 Busy</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY10</name>
<description>Channel 10 Busy</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CHBUSY11</name>
<description>Channel 11 Busy</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>OVR0</name>
<description>Channel 0 Overrun Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR1</name>
<description>Channel 1 Overrun Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR2</name>
<description>Channel 2 Overrun Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR3</name>
<description>Channel 3 Overrun Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR4</name>
<description>Channel 4 Overrun Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR5</name>
<description>Channel 5 Overrun Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR6</name>
<description>Channel 6 Overrun Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR7</name>
<description>Channel 7 Overrun Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR8</name>
<description>Channel 8 Overrun Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR9</name>
<description>Channel 9 Overrun Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR10</name>
<description>Channel 10 Overrun Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR11</name>
<description>Channel 11 Overrun Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD0</name>
<description>Channel 0 Event Detection Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD1</name>
<description>Channel 1 Event Detection Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD2</name>
<description>Channel 2 Event Detection Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD3</name>
<description>Channel 3 Event Detection Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD4</name>
<description>Channel 4 Event Detection Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD5</name>
<description>Channel 5 Event Detection Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD6</name>
<description>Channel 6 Event Detection Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD7</name>
<description>Channel 7 Event Detection Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD8</name>
<description>Channel 8 Event Detection Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD9</name>
<description>Channel 9 Event Detection Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD10</name>
<description>Channel 10 Event Detection Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD11</name>
<description>Channel 11 Event Detection Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>OVR0</name>
<description>Channel 0 Overrun Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR1</name>
<description>Channel 1 Overrun Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR2</name>
<description>Channel 2 Overrun Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR3</name>
<description>Channel 3 Overrun Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR4</name>
<description>Channel 4 Overrun Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR5</name>
<description>Channel 5 Overrun Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR6</name>
<description>Channel 6 Overrun Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR7</name>
<description>Channel 7 Overrun Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR8</name>
<description>Channel 8 Overrun Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR9</name>
<description>Channel 9 Overrun Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR10</name>
<description>Channel 10 Overrun Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR11</name>
<description>Channel 11 Overrun Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD0</name>
<description>Channel 0 Event Detection Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD1</name>
<description>Channel 1 Event Detection Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD2</name>
<description>Channel 2 Event Detection Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD3</name>
<description>Channel 3 Event Detection Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD4</name>
<description>Channel 4 Event Detection Interrupt Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD5</name>
<description>Channel 5 Event Detection Interrupt Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD6</name>
<description>Channel 6 Event Detection Interrupt Enable</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD7</name>
<description>Channel 7 Event Detection Interrupt Enable</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD8</name>
<description>Channel 8 Event Detection Interrupt Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD9</name>
<description>Channel 9 Event Detection Interrupt Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD10</name>
<description>Channel 10 Event Detection Interrupt Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD11</name>
<description>Channel 11 Event Detection Interrupt Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>OVR0</name>
<description>Channel 0 Overrun</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR1</name>
<description>Channel 1 Overrun</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR2</name>
<description>Channel 2 Overrun</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR3</name>
<description>Channel 3 Overrun</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR4</name>
<description>Channel 4 Overrun</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR5</name>
<description>Channel 5 Overrun</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR6</name>
<description>Channel 6 Overrun</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR7</name>
<description>Channel 7 Overrun</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR8</name>
<description>Channel 8 Overrun</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR9</name>
<description>Channel 9 Overrun</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR10</name>
<description>Channel 10 Overrun</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVR11</name>
<description>Channel 11 Overrun</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD0</name>
<description>Channel 0 Event Detection</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD1</name>
<description>Channel 1 Event Detection</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD2</name>
<description>Channel 2 Event Detection</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD3</name>
<description>Channel 3 Event Detection</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD4</name>
<description>Channel 4 Event Detection</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD5</name>
<description>Channel 5 Event Detection</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD6</name>
<description>Channel 6 Event Detection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD7</name>
<description>Channel 7 Event Detection</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD8</name>
<description>Channel 8 Event Detection</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD9</name>
<description>Channel 9 Event Detection</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD10</name>
<description>Channel 10 Event Detection</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EVD11</name>
<description>Channel 11 Event Detection</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SWEVT</name>
<description>Software Event</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>CHANNEL0</name>
<description>Channel 0 Software Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL1</name>
<description>Channel 1 Software Selection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL2</name>
<description>Channel 2 Software Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL3</name>
<description>Channel 3 Software Selection</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL4</name>
<description>Channel 4 Software Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL5</name>
<description>Channel 5 Software Selection</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL6</name>
<description>Channel 6 Software Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL7</name>
<description>Channel 7 Software Selection</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL8</name>
<description>Channel 8 Software Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL9</name>
<description>Channel 9 Software Selection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL10</name>
<description>Channel 10 Software Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CHANNEL11</name>
<description>Channel 11 Software Selection</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>12</dim>
<dimIncrement>0x4</dimIncrement>
<name>CHANNEL%s</name>
<description>Channel n</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x00008000</resetValue>
<fields>
<field>
<name>EVGEN</name>
<description>Event Generator Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>PATH</name>
<description>Path Selection</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PATHSelect</name>
<enumeratedValue>
<name>SYNCHRONOUS</name>
<description>Synchronous path</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNCHRONIZED</name>
<description>Resynchronized path</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ASYNCHRONOUS</name>
<description>Asynchronous path</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EDGSEL</name>
<description>Edge Detection Selection</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>EDGSELSelect</name>
<enumeratedValue>
<name>NO_EVT_OUTPUT</name>
<description>No event output when using the resynchronized or synchronous path</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISING_EDGE</name>
<description>Event detection only on the rising edge of the signal from the event generator when using the resynchronized or synchronous path</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALLING_EDGE</name>
<description>Event detection only on the falling edge of the signal from the event generator when using the resynchronized or synchronous path</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH_EDGES</name>
<description>Event detection on rising and falling edges of the signal from the event generator when using the resynchronized or synchronous path</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in standby</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>Generic Clock On Demand</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>45</dim>
<dimIncrement>0x4</dimIncrement>
<name>USER%s</name>
<description>User Multiplexer n</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
<fields>
<field>
<name>CHANNEL</name>
<description>Channel Event Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>GCLK</name>
<version>1.1.1</version>
<description>Generic Clock Generator</description>
<groupName>GCLK</groupName>
<prependToName>GCLK_</prependToName>
<baseAddress>0x40001800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>CTRLA</name>
<description>Control</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchroniation Busy bit</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>GENCTRL0</name>
<description>Generic Clock Generator Control 0 Synchronization Busy bits</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL0Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENCTRL1</name>
<description>Generic Clock Generator Control 1 Synchronization Busy bits</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL1Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENCTRL2</name>
<description>Generic Clock Generator Control 2 Synchronization Busy bits</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL2Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENCTRL3</name>
<description>Generic Clock Generator Control 3 Synchronization Busy bits</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL3Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENCTRL4</name>
<description>Generic Clock Generator Control 4 Synchronization Busy bits</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL4Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENCTRL5</name>
<description>Generic Clock Generator Control 5 Synchronization Busy bits</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL5Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENCTRL6</name>
<description>Generic Clock Generator Control 6 Synchronization Busy bits</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL6Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENCTRL7</name>
<description>Generic Clock Generator Control 7 Synchronization Busy bits</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL7Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENCTRL8</name>
<description>Generic Clock Generator Control 8 Synchronization Busy bits</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>GENCTRL8Select</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x80</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x100</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>9</dim>
<dimIncrement>0x4</dimIncrement>
<name>GENCTRL%s</name>
<description>Generic Clock Generator Control</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<fields>
<field>
<name>SRC</name>
<description>Source Select</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>SRCSelect</name>
<enumeratedValue>
<name>XOSC</name>
<description>XOSC oscillator output</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLKIN</name>
<description>Generator input pad</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLKGEN1</name>
<description>Generic clock generator 1 output</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>OSCULP32K</name>
<description>OSCULP32K oscillator output</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>OSC32K</name>
<description>OSC32K oscillator output</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC32K</name>
<description>XOSC32K oscillator output</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>OSC16M</name>
<description>OSC16M oscillator output</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DFLL48M</name>
<description>DFLL48M output</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DPLL96M</name>
<description>DPLL96M output</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>GENEN</name>
<description>Generic Clock Generator Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDC</name>
<description>Improve Duty Cycle</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OOV</name>
<description>Output Off Value</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OE</name>
<description>Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIVSEL</name>
<description>Divide Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIV</name>
<description>Division Factor</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>36</dim>
<dimIncrement>0x4</dimIncrement>
<name>PCHCTRL%s</name>
<description>Peripheral Clock Control</description>
<addressOffset>0x80</addressOffset>
<size>32</size>
<fields>
<field>
<name>GEN</name>
<description>Generic Clock Generator</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>GENSelect</name>
<enumeratedValue>
<name>GCLK0</name>
<description>Generic clock generator 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK1</name>
<description>Generic clock generator 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK2</name>
<description>Generic clock generator 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK3</name>
<description>Generic clock generator 3</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK4</name>
<description>Generic clock generator 4</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK5</name>
<description>Generic clock generator 5</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK6</name>
<description>Generic clock generator 6</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK7</name>
<description>Generic clock generator 7</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>GCLK8</name>
<description>Generic clock generator 8</description>
<value>0x8</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHEN</name>
<description>Channel Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRTLOCK</name>
<description>Write Lock</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>MCLK</name>
<version>1.0.1</version>
<description>Main Clock</description>
<groupName>MCLK</groupName>
<prependToName>MCLK_</prependToName>
<baseAddress>0x40000400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SYSTEM</name>
<value>0</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x01</addressOffset>
<size>8</size>
<fields>
<field>
<name>CKRDY</name>
<description>Clock Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x02</addressOffset>
<size>8</size>
<fields>
<field>
<name>CKRDY</name>
<description>Clock Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x03</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>CKRDY</name>
<description>Clock Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CPUDIV</name>
<description>CPU Clock Division</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>CPUDIV</name>
<description>CPU Clock Division Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>CPUDIVSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Divide by 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide by 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide by 4</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide by 8</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide by 16</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide by 32</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide by 64</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide by 128</description>
<value>0x80</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>LPDIV</name>
<description>Low-Power Clock Division</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>LPDIV</name>
<description>Low-Power Clock Division Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>LPDIVSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Divide by 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide by 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide by 4</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide by 8</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide by 16</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide by 32</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide by 64</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide by 128</description>
<value>0x80</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BUPDIV</name>
<description>Backup Clock Division</description>
<addressOffset>0x06</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>BUPDIV</name>
<description>Backup Clock Division Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>BUPDIVSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Divide by 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide by 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide by 4</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide by 8</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide by 16</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide by 32</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide by 64</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide by 128</description>
<value>0x80</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>AHBMASK</name>
<description>AHB Mask</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<resetValue>0x000FFFFF</resetValue>
<fields>
<field>
<name>HPB0_</name>
<description>HPB0 AHB Clock Mask</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB1_</name>
<description>HPB1 AHB Clock Mask</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB2_</name>
<description>HPB2 AHB Clock Mask</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB3_</name>
<description>HPB3 AHB Clock Mask</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB4_</name>
<description>HPB4 AHB Clock Mask</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSU_</name>
<description>DSU AHB Clock Mask</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_</name>
<description>NVMCTRL AHB Clock Mask</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSRAM_</name>
<description>HSRAM AHB Clock Mask</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPRAM_</name>
<description>LPRAM AHB Clock Mask</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAC_</name>
<description>DMAC AHB Clock Mask</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USB_</name>
<description>USB AHB Clock Mask</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PAC_</name>
<description>PAC AHB Clock Mask</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_PICACHU_</name>
<description>NVMCTRL_PICACHU AHB Clock Mask</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L2HBRIDGES_H_</name>
<description>L2HBRIDGES_H AHB Clock Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>H2LBRIDGES_H_</name>
<description>H2LBRIDGES_H AHB Clock Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSRAM_AHBSETUPKEEPER_</name>
<description>HSRAM_AHBSETUPKEEPER AHB Clock Mask</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSRAM_HMATRIXLP2HMCRAMCHSBRIDGE_</name>
<description>HSRAM_HMATRIXLP2HMCRAMCHSBRIDGE AHB Clock Mask</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBAMASK</name>
<description>APBA Mask</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00001FFF</resetValue>
<fields>
<field>
<name>PM_</name>
<description>PM APB Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCLK_</name>
<description>MCLK APB Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC_</name>
<description>RSTC APB Clock Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSCCTRL_</name>
<description>OSCCTRL APB Clock Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KCTRL_</name>
<description>OSC32KCTRL APB Clock Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUPC_</name>
<description>SUPC APB Clock Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCLK_</name>
<description>GCLK APB Clock Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDT_</name>
<description>WDT APB Clock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTC_</name>
<description>RTC APB Clock Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIC_</name>
<description>EIC APB Clock Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORT_</name>
<description>PORT APB Clock Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBBMASK</name>
<description>APBB Mask</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x00000017</resetValue>
<fields>
<field>
<name>USB_</name>
<description>USB APB Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSU_</name>
<description>DSU APB Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_</name>
<description>NVMCTRL APB Clock Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBCMASK</name>
<description>APBC Mask</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<resetValue>0x00007FFF</resetValue>
<fields>
<field>
<name>SERCOM0_</name>
<description>SERCOM0 APB Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM1_</name>
<description>SERCOM1 APB Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM2_</name>
<description>SERCOM2 APB Clock Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM3_</name>
<description>SERCOM3 APB Clock Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM4_</name>
<description>SERCOM4 APB Clock Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC0_</name>
<description>TCC0 APB Clock Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC1_</name>
<description>TCC1 APB Clock Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC2_</name>
<description>TCC2 APB Clock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC0_</name>
<description>TC0 APB Clock Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1_</name>
<description>TC1 APB Clock Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2_</name>
<description>TC2 APB Clock Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC3_</name>
<description>TC3 APB Clock Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC_</name>
<description>DAC APB Clock Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AES_</name>
<description>AES APB Clock Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRNG_</name>
<description>TRNG APB Clock Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBDMASK</name>
<description>APBD Mask</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<resetValue>0x000000FF</resetValue>
<fields>
<field>
<name>EVSYS_</name>
<description>EVSYS APB Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM5_</name>
<description>SERCOM5 APB Clock Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC4_</name>
<description>TC4 APB Clock Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC_</name>
<description>ADC APB Clock Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AC_</name>
<description>AC APB Clock Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTC_</name>
<description>PTC APB Clock Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCL_</name>
<description>CCL APB Clock Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>APBEMASK</name>
<description>APBE Mask</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<resetValue>0x0000000D</resetValue>
<fields>
<field>
<name>PAC_</name>
<description>PAC APB Clock Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>MTB</name>
<version>1.0.0</version>
<description>Cortex-M0+ Micro-Trace Buffer</description>
<groupName>MTB</groupName>
<prependToName>MTB_</prependToName>
<baseAddress>0x41006000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x1000</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>POSITION</name>
<description>MTB Position</description>
<addressOffset>0x000</addressOffset>
<size>32</size>
<fields>
<field>
<name>WRAP</name>
<description>Pointer Value Wraps</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POINTER</name>
<description>Trace Packet Location Pointer</description>
<bitOffset>3</bitOffset>
<bitWidth>29</bitWidth>
</field>
</fields>
</register>
<register>
<name>MASTER</name>
<description>MTB Master</description>
<addressOffset>0x004</addressOffset>
<size>32</size>
<fields>
<field>
<name>MASK</name>
<description>Maximum Value of the Trace Buffer in SRAM</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TSTARTEN</name>
<description>Trace Start Input Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTOPEN</name>
<description>Trace Stop Input Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SFRWPRIV</name>
<description>Special Function Register Write Privilege</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMPRIV</name>
<description>SRAM Privilege</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALTREQ</name>
<description>Halt Request</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN</name>
<description>Main Trace Enable</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLOW</name>
<description>MTB Flow</description>
<addressOffset>0x008</addressOffset>
<size>32</size>
<fields>
<field>
<name>AUTOSTOP</name>
<description>Auto Stop Tracing</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AUTOHALT</name>
<description>Auto Halt Request</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WATERMARK</name>
<description>Watermark value</description>
<bitOffset>3</bitOffset>
<bitWidth>29</bitWidth>
</field>
</fields>
</register>
<register>
<name>BASE</name>
<description>MTB Base</description>
<addressOffset>0x00C</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>ITCTRL</name>
<description>MTB Integration Mode Control</description>
<addressOffset>0xF00</addressOffset>
<size>32</size>
</register>
<register>
<name>CLAIMSET</name>
<description>MTB Claim Set</description>
<addressOffset>0xFA0</addressOffset>
<size>32</size>
</register>
<register>
<name>CLAIMCLR</name>
<description>MTB Claim Clear</description>
<addressOffset>0xFA4</addressOffset>
<size>32</size>
</register>
<register>
<name>LOCKACCESS</name>
<description>MTB Lock Access</description>
<addressOffset>0xFB0</addressOffset>
<size>32</size>
</register>
<register>
<name>LOCKSTATUS</name>
<description>MTB Lock Status</description>
<addressOffset>0xFB4</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>AUTHSTATUS</name>
<description>MTB Authentication Status</description>
<addressOffset>0xFB8</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>DEVARCH</name>
<description>MTB Device Architecture</description>
<addressOffset>0xFBC</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>DEVID</name>
<description>MTB Device Configuration</description>
<addressOffset>0xFC8</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>DEVTYPE</name>
<description>MTB Device Type</description>
<addressOffset>0xFCC</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID4</name>
<description>Peripheral Identification 4</description>
<addressOffset>0xFD0</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID5</name>
<description>Peripheral Identification 5</description>
<addressOffset>0xFD4</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID6</name>
<description>Peripheral Identification 6</description>
<addressOffset>0xFD8</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID7</name>
<description>Peripheral Identification 7</description>
<addressOffset>0xFDC</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID0</name>
<description>Peripheral Identification 0</description>
<addressOffset>0xFE0</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID1</name>
<description>Peripheral Identification 1</description>
<addressOffset>0xFE4</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID2</name>
<description>Peripheral Identification 2</description>
<addressOffset>0xFE8</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>PID3</name>
<description>Peripheral Identification 3</description>
<addressOffset>0xFEC</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>CID0</name>
<description>Component Identification 0</description>
<addressOffset>0xFF0</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>CID1</name>
<description>Component Identification 1</description>
<addressOffset>0xFF4</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>CID2</name>
<description>Component Identification 2</description>
<addressOffset>0xFF8</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
<register>
<name>CID3</name>
<description>Component Identification 3</description>
<addressOffset>0xFFC</addressOffset>
<size>32</size>
<access>read-only</access>
</register>
</registers>
</peripheral>
<peripheral>
<name>NVMCTRL</name>
<version>3.0.2</version>
<description>Non-Volatile Memory Controller</description>
<groupName>NVMCTRL</groupName>
<prependToName>NVMCTRL_</prependToName>
<baseAddress>0x41004000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>NVMCTRL</name>
<value>4</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>16</size>
<fields>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>ER</name>
<description>Erase Row - Erases the row addressed by the ADDR register.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>WP</name>
<description>Write Page - Writes the contents of the page buffer to the page addressed by the ADDR register.</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>EAR</name>
<description>Erase Auxiliary Row - Erases the auxiliary row addressed by the ADDR register. This command can be given only when the security bit is not set and only to the user configuration row.</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>WAP</name>
<description>Write Auxiliary Page - Writes the contents of the page buffer to the page addressed by the ADDR register. This command can be given only when the security bit is not set and only to the user configuration row.</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>SF</name>
<description>Security Flow Command</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>WL</name>
<description>Write lockbits</description>
<value>0xf</value>
</enumeratedValue>
<enumeratedValue>
<name>RWWEEER</name>
<description>RWW EEPROM area Erase Row - Erases the row addressed by the ADDR register.</description>
<value>0x1a</value>
</enumeratedValue>
<enumeratedValue>
<name>RWWEEWP</name>
<description>RWW EEPROM Write Page - Writes the contents of the page buffer to the page addressed by the ADDR register.</description>
<value>0x1c</value>
</enumeratedValue>
<enumeratedValue>
<name>LR</name>
<description>Lock Region - Locks the region containing the address location in the ADDR register.</description>
<value>0x40</value>
</enumeratedValue>
<enumeratedValue>
<name>UR</name>
<description>Unlock Region - Unlocks the region containing the address location in the ADDR register.</description>
<value>0x41</value>
</enumeratedValue>
<enumeratedValue>
<name>SPRM</name>
<description>Sets the power reduction mode.</description>
<value>0x42</value>
</enumeratedValue>
<enumeratedValue>
<name>CPRM</name>
<description>Clears the power reduction mode.</description>
<value>0x43</value>
</enumeratedValue>
<enumeratedValue>
<name>PBC</name>
<description>Page Buffer Clear - Clears the page buffer.</description>
<value>0x44</value>
</enumeratedValue>
<enumeratedValue>
<name>SSB</name>
<description>Set Security Bit - Sets the security bit by writing 0x00 to the first byte in the lockbit row.</description>
<value>0x45</value>
</enumeratedValue>
<enumeratedValue>
<name>INVALL</name>
<description>Invalidate all cache lines.</description>
<value>0x46</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMDEX</name>
<description>Command Execution</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>CMDEXSelect</name>
<enumeratedValue>
<name>KEY</name>
<description>Execution Key</description>
<value>0xa5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>Control B</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<resetValue>0x00000080</resetValue>
<fields>
<field>
<name>RWS</name>
<description>NVM Read Wait States</description>
<bitOffset>1</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>RWSSelect</name>
<enumeratedValue>
<name>SINGLE</name>
<description>Single Auto Wait State</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HALF</name>
<description>Half Auto Wait State</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DUAL</name>
<description>Dual Auto Wait State</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MANW</name>
<description>Manual Write</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLEEPPRM</name>
<description>Power Reduction Mode during Sleep</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SLEEPPRMSelect</name>
<enumeratedValue>
<name>WAKEONACCESS</name>
<description>NVM block enters low-power mode when entering sleep.NVM block exits low-power mode upon first access.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>WAKEUPINSTANT</name>
<description>NVM block enters low-power mode when entering sleep.NVM block exits low-power mode when exiting sleep.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DISABLED</name>
<description>Auto power reduction disabled.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>FWUP</name>
<description>fast wake-up</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>READMODE</name>
<description>NVMCTRL Read Mode</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>READMODESelect</name>
<enumeratedValue>
<name>NO_MISS_PENALTY</name>
<description>The NVM Controller (cache system) does not insert wait states on a cache miss. Gives the best system performance.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LOW_POWER</name>
<description>Reduces power consumption of the cache system, but inserts a wait state each time there is a cache miss. This mode may not be relevant if CPU performance is required, as the application will be stalled and may lead to increase run time.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DETERMINISTIC</name>
<description>The cache system ensures that a cache hit or miss takes the same amount of time, determined by the number of programmed flash wait states. This mode can be used for real-time applications that require deterministic execution timings.</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CACHEDIS</name>
<description>Cache Disable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PARAM</name>
<description>NVM Parameter</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<fields>
<field>
<name>NVMP</name>
<description>NVM Pages</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PSZ</name>
<description>Page Size</description>
<bitOffset>16</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>PSZSelect</name>
<enumeratedValue>
<name>8</name>
<description>8 bytes</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16 bytes</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>32</name>
<description>32 bytes</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>64</name>
<description>64 bytes</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>128</name>
<description>128 bytes</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>256</name>
<description>256 bytes</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>512</name>
<description>512 bytes</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>1024</name>
<description>1024 bytes</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RWWEEP</name>
<description>RWW EEPROM Pages</description>
<bitOffset>20</bitOffset>
<bitWidth>12</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>READY</name>
<description>NVM Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Error Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x10</addressOffset>
<size>8</size>
<fields>
<field>
<name>READY</name>
<description>NVM Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Error Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>READY</name>
<description>NVM Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x18</addressOffset>
<size>16</size>
<fields>
<field>
<name>PRM</name>
<description>Power Reduction Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOAD</name>
<description>NVM Page Buffer Active Loading</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PROGE</name>
<description>Programming Error Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOCKE</name>
<description>Lock Error Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVME</name>
<description>NVM Error</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SB</name>
<description>Security Bit Status</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>Address</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>ADDR</name>
<description>NVM Address</description>
<bitOffset>0</bitOffset>
<bitWidth>22</bitWidth>
</field>
</fields>
</register>
<register>
<name>LOCK</name>
<description>Lock Section</description>
<addressOffset>0x20</addressOffset>
<size>16</size>
<fields>
<field>
<name>LOCK</name>
<description>Region Lock Bits</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>OSCCTRL</name>
<version>1.1.0</version>
<description>Oscillators Control</description>
<groupName>OSCCTRL</groupName>
<prependToName>OSCCTRL_</prependToName>
<baseAddress>0x40000C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SYSTEM</name>
<value>0</value>
</interrupt>
<registers>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>XOSCRDY</name>
<description>XOSC Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC16MRDY</name>
<description>OSC16M Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRDY</name>
<description>DFLL Ready Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLOOB</name>
<description>DFLL Out Of Bounds Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKF</name>
<description>DFLL Lock Fine Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKC</name>
<description>DFLL Lock Coarse Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRCS</name>
<description>DFLL Reference Clock Stopped Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLCKR</name>
<description>DPLL Lock Rise Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLCKF</name>
<description>DPLL Lock Fall Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLTO</name>
<description>DPLL Time Out Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLDRTO</name>
<description>DPLL Ratio Ready Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>XOSCRDY</name>
<description>XOSC Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC16MRDY</name>
<description>OSC16M Ready Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRDY</name>
<description>DFLL Ready Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLOOB</name>
<description>DFLL Out Of Bounds Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKF</name>
<description>DFLL Lock Fine Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKC</name>
<description>DFLL Lock Coarse Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRCS</name>
<description>DFLL Reference Clock Stopped Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLCKR</name>
<description>DPLL Lock Rise Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLCKF</name>
<description>DPLL Lock Fall Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLTO</name>
<description>DPLL Time Out Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLDRTO</name>
<description>DPLL Ratio Ready Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<fields>
<field>
<name>XOSCRDY</name>
<description>XOSC Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC16MRDY</name>
<description>OSC16M Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRDY</name>
<description>DFLL Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLOOB</name>
<description>DFLL Out Of Bounds</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKF</name>
<description>DFLL Lock Fine</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLLCKC</name>
<description>DFLL Lock Coarse</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFLLRCS</name>
<description>DFLL Reference Clock Stopped</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLCKR</name>
<description>DPLL Lock Rise</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLCKF</name>
<description>DPLL Lock Fall</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLTO</name>
<description>DPLL Timeout</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPLLLDRTO</name>
<description>DPLL Ratio Ready</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Power and Clocks Status</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>XOSCRDY</name>
<description>XOSC Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OSC16MRDY</name>
<description>OSC16M Ready</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DFLLRDY</name>
<description>DFLL Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DFLLOOB</name>
<description>DFLL Out Of Bounds</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DFLLLCKF</name>
<description>DFLL Lock Fine</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DFLLLCKC</name>
<description>DFLL Lock Coarse</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DFLLRCS</name>
<description>DFLL Reference Clock Stopped</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DPLLLCKR</name>
<description>DPLL Lock Rise</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DPLLLCKF</name>
<description>DPLL Lock Fall</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DPLLTO</name>
<description>DPLL Timeout</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DPLLLDRTO</name>
<description>DPLL Ratio Ready</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>XOSCCTRL</name>
<description>External Multipurpose Crystal Oscillator (XOSC) Control</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<resetValue>0x0080</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Oscillator Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XTALEN</name>
<description>Crystal Oscillator Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GAIN</name>
<description>Oscillator Gain</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>AMPGC</name>
<description>Automatic Amplitude Gain Control</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTUP</name>
<description>Start-Up Time</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>OSC16MCTRL</name>
<description>16MHz Internal Oscillator (OSC16M) Control</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<resetValue>0x82</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Oscillator Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FSEL</name>
<description>Oscillator Frequency Select</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>FSELSelect</name>
<enumeratedValue>
<name>4</name>
<description>4MHz</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>8</name>
<description>8MHz</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>12</name>
<description>12MHz</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>16</name>
<description>16MHz</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFLLCTRL</name>
<description>DFLL48M Control</description>
<addressOffset>0x18</addressOffset>
<size>16</size>
<resetValue>0x0080</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>DFLL Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode Selection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STABLE</name>
<description>Stable DFLL Frequency</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LLAW</name>
<description>Lose Lock After Wake</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>USBCRM</name>
<description>USB Clock Recovery Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCDIS</name>
<description>Chill Cycle Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QLDIS</name>
<description>Quick Lock Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BPLCKC</name>
<description>Bypass Coarse Lock</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAITLOCK</name>
<description>Wait Lock</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFLLVAL</name>
<description>DFLL48M Value</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>FINE</name>
<description>Fine Value</description>
<bitOffset>0</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>COARSE</name>
<description>Coarse Value</description>
<bitOffset>10</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>DIFF</name>
<description>Multiplication Ratio Difference</description>
<bitOffset>16</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DFLLMUL</name>
<description>DFLL48M Multiplier</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<fields>
<field>
<name>MUL</name>
<description>DFLL Multiply Factor</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>FSTEP</name>
<description>Fine Maximum Step</description>
<bitOffset>16</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>CSTEP</name>
<description>Coarse Maximum Step</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>DFLLSYNC</name>
<description>DFLL48M Synchronization</description>
<addressOffset>0x24</addressOffset>
<size>8</size>
<fields>
<field>
<name>READREQ</name>
<description>Read Request</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>DPLLCTRLA</name>
<description>DPLL Control</description>
<addressOffset>0x28</addressOffset>
<size>8</size>
<resetValue>0x80</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DPLLRATIO</name>
<description>DPLL Ratio Control</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<fields>
<field>
<name>LDR</name>
<description>Loop Divider Ratio</description>
<bitOffset>0</bitOffset>
<bitWidth>12</bitWidth>
</field>
<field>
<name>LDRFRAC</name>
<description>Loop Divider Ratio Fractional Part</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>DPLLCTRLB</name>
<description>Digital Core Configuration</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<fields>
<field>
<name>FILTER</name>
<description>Proportional Integral Filter Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LPEN</name>
<description>Low-Power Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WUF</name>
<description>Wake Up Fast</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>REFCLK</name>
<description>Reference Clock Selection</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LTIME</name>
<description>Lock Time</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>LBYPASS</name>
<description>Lock Bypass</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DIV</name>
<description>Clock Divider</description>
<bitOffset>16</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>DPLLPRESC</name>
<description>DPLL Prescaler</description>
<addressOffset>0x34</addressOffset>
<size>8</size>
<fields>
<field>
<name>PRESC</name>
<description>Output Clock Prescaler</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>DPLL output is divided by 1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>DPLL output is divided by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>DPLL output is divided by 4</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DPLLSYNCBUSY</name>
<description>DPLL Synchronization Busy</description>
<addressOffset>0x38</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>ENABLE</name>
<description>DPLL Enable Synchronization Status</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DPLLRATIO</name>
<description>DPLL Ratio Synchronization Status</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DPLLPRESC</name>
<description>DPLL Prescaler Synchronization Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DPLLSTATUS</name>
<description>DPLL Status</description>
<addressOffset>0x3C</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>LOCK</name>
<description>DPLL Lock Status</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLKRDY</name>
<description>DPLL Clock Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>OSC32KCTRL</name>
<version>1.1.0</version>
<description>32k Oscillators Control</description>
<groupName>OSC32KCTRL</groupName>
<prependToName>OSC32KCTRL_</prependToName>
<baseAddress>0x40001000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SYSTEM</name>
<value>0</value>
</interrupt>
<registers>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>XOSC32KRDY</name>
<description>XOSC32K Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KRDY</name>
<description>OSC32K Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>XOSC32KRDY</name>
<description>XOSC32K Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KRDY</name>
<description>OSC32K Ready Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<fields>
<field>
<name>XOSC32KRDY</name>
<description>XOSC32K Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KRDY</name>
<description>OSC32K Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Power and Clocks Status</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>XOSC32KRDY</name>
<description>XOSC32K Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>OSC32KRDY</name>
<description>OSC32K Ready</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>RTCCTRL</name>
<description>Clock selection</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>RTCSEL</name>
<description>RTC Clock Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>RTCSELSelect</name>
<enumeratedValue>
<name>ULP1K</name>
<description>1.024kHz from 32kHz internal ULP oscillator</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ULP32K</name>
<description>32.768kHz from 32kHz internal ULP oscillator</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>OSC1K</name>
<description>1.024kHz from 32.768kHz internal oscillator</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>OSC32K</name>
<description>32.768kHz from 32.768kHz internal oscillator</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC1K</name>
<description>1.024kHz from 32.768kHz internal oscillator</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>XOSC32K</name>
<description>32.768kHz from 32.768kHz external crystal oscillator</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>XOSC32K</name>
<description>32kHz External Crystal Oscillator (XOSC32K) Control</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<resetValue>0x00000080</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Oscillator Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>XTALEN</name>
<description>Crystal Oscillator Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN32K</name>
<description>32kHz Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN1K</name>
<description>1kHz Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTUP</name>
<description>Oscillator Start-Up Time</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>WRTLOCK</name>
<description>Write Lock</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>OSC32K</name>
<description>32kHz Internal Oscillator (OSC32K) Control</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<resetValue>0x003F0080</resetValue>
<fields>
<field>
<name>ENABLE</name>
<description>Oscillator Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN32K</name>
<description>32kHz Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EN1K</name>
<description>1kHz Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Control</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STARTUP</name>
<description>Oscillator Start-Up Time</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>WRTLOCK</name>
<description>Write Lock</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CALIB</name>
<description>Oscillator Calibration</description>
<bitOffset>16</bitOffset>
<bitWidth>7</bitWidth>
</field>
</fields>
</register>
<register>
<name>OSCULP32K</name>
<description>32kHz Ultra Low Power Internal Oscillator (OSCULP32K) Control</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>CALIB</name>
<description>Oscillator Calibration</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>WRTLOCK</name>
<description>Write Lock</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PAC</name>
<version>1.1.0</version>
<description>Peripheral Access Controller</description>
<groupName>PAC</groupName>
<prependToName>PAC_</prependToName>
<baseAddress>0x44000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SYSTEM</name>
<value>0</value>
</interrupt>
<registers>
<register>
<name>WRCTRL</name>
<description>Write control</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>PERID</name>
<description>Peripheral identifier</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>KEY</name>
<description>Peripheral access control key</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
<enumeratedValues>
<name>KEYSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CLR</name>
<description>Clear protection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set protection</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SETLCK</name>
<description>Set and lock protection</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event control</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>ERREO</name>
<description>Peripheral acess error event output</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt enable clear</description>
<addressOffset>0x08</addressOffset>
<size>8</size>
<fields>
<field>
<name>ERR</name>
<description>Peripheral access error interrupt disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt enable set</description>
<addressOffset>0x09</addressOffset>
<size>8</size>
<fields>
<field>
<name>ERR</name>
<description>Peripheral access error interrupt enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGAHB</name>
<description>Bridge interrupt flag status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>FLASH_</name>
<description>FLASH</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSRAMCM0P_</name>
<description>HSRAMCM0P</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSRAMDSU_</name>
<description>HSRAMDSU</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB1_</name>
<description>HPB1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>H2LBRIDGES_</name>
<description>H2LBRIDGES</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB0_</name>
<description>HPB0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB2_</name>
<description>HPB2</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB3_</name>
<description>HPB3</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HPB4_</name>
<description>HPB4</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPRAMHS_</name>
<description>LPRAMHS</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPRAMPICOP_</name>
<description>LPRAMPICOP</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPRAMDMAC_</name>
<description>LPRAMDMAC</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L2HBRIDGES_</name>
<description>L2HBRIDGES</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HSRAMLP_</name>
<description>HSRAMLP</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGA</name>
<description>Peripheral interrupt flag status - Bridge A</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>PM_</name>
<description>PM</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCLK_</name>
<description>MCLK</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC_</name>
<description>RSTC</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSCCTRL_</name>
<description>OSCCTRL</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KCTRL_</name>
<description>OSC32KCTRL</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUPC_</name>
<description>SUPC</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCLK_</name>
<description>GCLK</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDT_</name>
<description>WDT</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTC_</name>
<description>RTC</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIC_</name>
<description>EIC</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORT_</name>
<description>PORT</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGB</name>
<description>Peripheral interrupt flag status - Bridge B</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>USB_</name>
<description>USB</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSU_</name>
<description>DSU</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_</name>
<description>NVMCTRL</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MTB_</name>
<description>MTB</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGC</name>
<description>Peripheral interrupt flag status - Bridge C</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>SERCOM0_</name>
<description>SERCOM0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM1_</name>
<description>SERCOM1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM2_</name>
<description>SERCOM2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM3_</name>
<description>SERCOM3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM4_</name>
<description>SERCOM4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC0_</name>
<description>TCC0</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC1_</name>
<description>TCC1</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC2_</name>
<description>TCC2</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC0_</name>
<description>TC0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1_</name>
<description>TC1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2_</name>
<description>TC2</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC3_</name>
<description>TC3</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC_</name>
<description>DAC</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AES_</name>
<description>AES</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRNG_</name>
<description>TRNG</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGD</name>
<description>Peripheral interrupt flag status - Bridge D</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<fields>
<field>
<name>EVSYS_</name>
<description>EVSYS</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM5_</name>
<description>SERCOM5</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC4_</name>
<description>TC4</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC_</name>
<description>ADC</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AC_</name>
<description>AC</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTC_</name>
<description>PTC</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCL_</name>
<description>CCL</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAGE</name>
<description>Peripheral interrupt flag status - Bridge E</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>PAC_</name>
<description>PAC</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAC_</name>
<description>DMAC</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSA</name>
<description>Peripheral write protection status - Bridge A</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00003000</resetValue>
<fields>
<field>
<name>PM_</name>
<description>PM APB Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCLK_</name>
<description>MCLK APB Protect Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RSTC_</name>
<description>RSTC APB Protect Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSCCTRL_</name>
<description>OSCCTRL APB Protect Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OSC32KCTRL_</name>
<description>OSC32KCTRL APB Protect Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SUPC_</name>
<description>SUPC APB Protect Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCLK_</name>
<description>GCLK APB Protect Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDT_</name>
<description>WDT APB Protect Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RTC_</name>
<description>RTC APB Protect Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EIC_</name>
<description>EIC APB Protect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PORT_</name>
<description>PORT APB Protect Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSB</name>
<description>Peripheral write protection status - Bridge B</description>
<addressOffset>0x38</addressOffset>
<size>32</size>
<access>read-only</access>
<resetValue>0x00000002</resetValue>
<fields>
<field>
<name>USB_</name>
<description>USB APB Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DSU_</name>
<description>DSU APB Protect Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NVMCTRL_</name>
<description>NVMCTRL APB Protect Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MTB_</name>
<description>MTB APB Protect Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSC</name>
<description>Peripheral write protection status - Bridge C</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SERCOM0_</name>
<description>SERCOM0 APB Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM1_</name>
<description>SERCOM1 APB Protect Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM2_</name>
<description>SERCOM2 APB Protect Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM3_</name>
<description>SERCOM3 APB Protect Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM4_</name>
<description>SERCOM4 APB Protect Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC0_</name>
<description>TCC0 APB Protect Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC1_</name>
<description>TCC1 APB Protect Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCC2_</name>
<description>TCC2 APB Protect Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC0_</name>
<description>TC0 APB Protect Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC1_</name>
<description>TC1 APB Protect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC2_</name>
<description>TC2 APB Protect Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC3_</name>
<description>TC3 APB Protect Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DAC_</name>
<description>DAC APB Protect Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AES_</name>
<description>AES APB Protect Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRNG_</name>
<description>TRNG APB Protect Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSD</name>
<description>Peripheral write protection status - Bridge D</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>EVSYS_</name>
<description>EVSYS APB Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SERCOM5_</name>
<description>SERCOM5 APB Protect Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TC4_</name>
<description>TC4 APB Protect Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADC_</name>
<description>ADC APB Protect Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AC_</name>
<description>AC APB Protect Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTC_</name>
<description>PTC APB Protect Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCL_</name>
<description>CCL APB Protect Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUSE</name>
<description>Peripheral write protection status - Bridge E</description>
<addressOffset>0x44</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>PAC_</name>
<description>PAC APB Protect Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAC_</name>
<description>DMAC APB Protect Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PM</name>
<version>1.0.2</version>
<description>Power Manager</description>
<groupName>PM</groupName>
<prependToName>PM_</prependToName>
<baseAddress>0x40000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SYSTEM</name>
<value>0</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<fields>
<field>
<name>IORET</name>
<description>I/O Retention</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SLEEPCFG</name>
<description>Sleep Configuration</description>
<addressOffset>0x01</addressOffset>
<size>8</size>
<resetValue>0x02</resetValue>
<fields>
<field>
<name>SLEEPMODE</name>
<description>Sleep Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SLEEPMODESelect</name>
<enumeratedValue>
<name>IDLE</name>
<description>CPU, AHBx, and APBx clocks are OFF</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>STANDBY</name>
<description>All Clocks are OFF</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>BACKUP</name>
<description>Only Backup domain is powered ON</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>OFF</name>
<description>All power domains are powered OFF</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>PLCFG</name>
<description>Performance Level Configuration</description>
<addressOffset>0x02</addressOffset>
<size>8</size>
<fields>
<field>
<name>PLSEL</name>
<description>Performance Level Select</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PLSELSelect</name>
<enumeratedValue>
<name>PL0</name>
<description>Performance Level 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PL1</name>
<description>Performance Level 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PL2</name>
<description>Performance Level 2</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PLDIS</name>
<description>Performance Level Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>PLRDY</name>
<description>Performance Level Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>PLRDY</name>
<description>Performance Level Ready interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x06</addressOffset>
<size>8</size>
<fields>
<field>
<name>PLRDY</name>
<description>Performance Level Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STDBYCFG</name>
<description>Standby Configuration</description>
<addressOffset>0x08</addressOffset>
<size>16</size>
<fields>
<field>
<name>PDCFG</name>
<description>Power Domain Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PDCFGSelect</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>All power domains switching is handled by hardware.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PD0</name>
<description>PD0 is forced ACTIVE. PD1 and PD2 power domains switching is handled by hardware.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PD01</name>
<description>PD0 and PD1 are forced ACTIVE. PD2 power domain switching is handled by hardware.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PD012</name>
<description>All power domains are forced ACTIVE.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DPGPD0</name>
<description>Dynamic Power Gating for PD0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DPGPD1</name>
<description>Dynamic Power Gating for PD1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREGSMOD</name>
<description>Voltage Regulator Standby mode</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>VREGSMODSelect</name>
<enumeratedValue>
<name>AUTO</name>
<description>Automatic mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PERFORMANCE</name>
<description>Performance oriented</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LP</name>
<description>Low Power oriented</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LINKPD</name>
<description>Linked Power Domain</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>LINKPDSelect</name>
<enumeratedValue>
<name>DEFAULT</name>
<description>Power domains are not linked</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PD01</name>
<description>PD0 and PD1 power domains are linked</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>PD12</name>
<description>PD1 and PD2 power domains are linked</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>PD012</name>
<description>All power domains are linked</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BBIASHS</name>
<description>Back Bias for HMCRAMCHS</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>BBIASLP</name>
<description>Back Bias for HMCRAMCLP</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>BBIASPP</name>
<description>Back Bias for PicoPram</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>PWSAKDLY</name>
<description>Power Switch Acknowledge Delay</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>DLYVAL</name>
<description>Delay Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>IGNACK</name>
<description>Ignore Acknowledge</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>PORT</name>
<version>2.0.1</version>
<description>Port Module</description>
<groupName>PORT</groupName>
<prependToName>PORT_</prependToName>
<baseAddress>0x40002800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x200</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>DIR%s</name>
<description>Data Direction</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>DIR</name>
<description>Port Data Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>DIRCLR%s</name>
<description>Data Direction Clear</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>DIRCLR</name>
<description>Port Data Direction Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>DIRSET%s</name>
<description>Data Direction Set</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<fields>
<field>
<name>DIRSET</name>
<description>Port Data Direction Set</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>DIRTGL%s</name>
<description>Data Direction Toggle</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<fields>
<field>
<name>DIRTGL</name>
<description>Port Data Direction Toggle</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>OUT%s</name>
<description>Data Output Value</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>OUT</name>
<description>Port Data Output Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>OUTCLR%s</name>
<description>Data Output Value Clear</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>OUTCLR</name>
<description>Port Data Output Value Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>OUTSET%s</name>
<description>Data Output Value Set</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>OUTSET</name>
<description>Port Data Output Value Set</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>OUTTGL%s</name>
<description>Data Output Value Toggle</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>OUTTGL</name>
<description>Port Data Output Value Toggle</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>IN%s</name>
<description>Data Input Value</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>IN</name>
<description>Port Data Input Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>CTRL%s</name>
<description>Control</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>SAMPLING</name>
<description>Input Sampling Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>WRCONFIG%s</name>
<description>Write Configuration</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>write-only</access>
<fields>
<field>
<name>PINMASK</name>
<description>Pin Mask for Multiple Pin Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
<field>
<name>PMUXEN</name>
<description>Select Peripheral Multiplexer</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INEN</name>
<description>Input Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PULLEN</name>
<description>Pull Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRVSTR</name>
<description>Output Driver Strength Selection</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PMUX</name>
<description>Peripheral Multiplexing Template</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>WRPMUX</name>
<description>Write PMUX Registers</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WRPINCFG</name>
<description>Write PINCFG Registers</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HWSEL</name>
<description>Half-Word Select</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>3</dim>
<dimIncrement>0x80</dimIncrement>
<name>EVCTRL%s</name>
<description>Event Input Control</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<fields>
<field>
<name>PID0</name>
<description>Port Event Pin Identifier 0</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EVACT0</name>
<description>Port Event Action 0</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PORTEI0</name>
<description>Port Event Enable Input 0</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PID1</name>
<description>Port Event Pin Identifier 1</description>
<bitOffset>8</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EVACT1</name>
<description>Port Event Action 1</description>
<bitOffset>13</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PORTEI1</name>
<description>Port Event Enable Input 1</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PID2</name>
<description>Port Event Pin Identifier 2</description>
<bitOffset>16</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EVACT2</name>
<description>Port Event Action 2</description>
<bitOffset>21</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PORTEI2</name>
<description>Port Event Enable Input 2</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PID3</name>
<description>Port Event Pin Identifier 3</description>
<bitOffset>24</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>EVACT3</name>
<description>Port Event Action 3</description>
<bitOffset>29</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>PORTEI3</name>
<description>Port Event Enable Input 3</description>
<bitOffset>31</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>16</dim>
<dimIncrement>0x1</dimIncrement>
<name>PMUX0_%s</name>
<description>Peripheral Multiplexing n - Group 0</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<fields>
<field>
<name>PMUXE</name>
<description>Peripheral Multiplexing for Even-Numbered Pin</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PMUXO</name>
<description>Peripheral Multiplexing for Odd-Numbered Pin</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register derivedFrom="PMUX0_%s">
<dim>16</dim>
<dimIncrement>0x1</dimIncrement>
<name>PMUX1_%s</name>
<description>Peripheral Multiplexing n - Group 1</description>
<addressOffset>0xb0</addressOffset>
</register>
<register derivedFrom="PMUX0_%s">
<dim>16</dim>
<dimIncrement>0x1</dimIncrement>
<name>PMUX2_%s</name>
<description>Peripheral Multiplexing n - Group 2</description>
<addressOffset>0x130</addressOffset>
</register>
<register>
<dim>32</dim>
<dimIncrement>0x1</dimIncrement>
<name>PINCFG0_%s</name>
<description>Pin Configuration n - Group 0</description>
<addressOffset>0x40</addressOffset>
<size>8</size>
<fields>
<field>
<name>PMUXEN</name>
<description>Select Peripheral Multiplexer</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INEN</name>
<description>Input Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PULLEN</name>
<description>Pull Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRVSTR</name>
<description>Output Driver Strength Selection</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register derivedFrom="PINCFG0_%s">
<dim>32</dim>
<dimIncrement>0x1</dimIncrement>
<name>PINCFG1_%s</name>
<description>Pin Configuration n - Group 1</description>
<addressOffset>0xc0</addressOffset>
</register>
<register derivedFrom="PINCFG0_%s">
<dim>32</dim>
<dimIncrement>0x1</dimIncrement>
<name>PINCFG2_%s</name>
<description>Pin Configuration n - Group 2</description>
<addressOffset>0x140</addressOffset>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="PORT">
<name>PORT_IOBUS</name>
<description>Port Module (IOBUS)</description>
<groupName>PORT_IOBUS</groupName>
<prependToName>PORT_IOBUS_</prependToName>
<baseAddress>0x60000000</baseAddress>
</peripheral>
<peripheral>
<name>RSTC</name>
<version>1.1.0</version>
<description>Reset Controller</description>
<groupName>RSTC</groupName>
<prependToName>RSTC_</prependToName>
<baseAddress>0x40000800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x20</size>
<usage>registers</usage>
</addressBlock>
<registers>
<register>
<name>RCAUSE</name>
<description>Reset Cause</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>POR</name>
<description>Power On Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD12</name>
<description>Brown Out 12 Detector Reset</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD33</name>
<description>Brown Out 33 Detector Reset</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EXT</name>
<description>External Reset</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WDT</name>
<description>Watchdog Reset</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SYST</name>
<description>System Reset Request</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BACKUP</name>
<description>Backup Reset</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BKUPEXIT</name>
<description>Backup Exit Source</description>
<addressOffset>0x02</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>EXTWAKE</name>
<description>External Wakeup</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RTC</name>
<description>Real Timer Counter Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BBPS</name>
<description>Battery Backup Power Switch</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>WKDBCONF</name>
<description>Wakeup Debounce Configuration</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>WKDBCNT</name>
<description>Wakeup Debounce Counter</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>WKDBCNTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>No debouncing.Input pin is low or high level sensitive depending on its WKPOLx bit.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>2CK32</name>
<description>Input pin shall be active for at least two 32kHz clock period.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>3CK32</name>
<description>Input pin shall be active for at least three 32kHz clock period.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>32CK32</name>
<description>Input pin shall be active for at least 32 32kHz clock period.</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>512CK32</name>
<description>Input pin shall be active for at least 512 32kHz clock period.</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>4096CK32</name>
<description>Input pin shall be active for at least 4096 32kHz clock period.</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>32768CK32</name>
<description>Input pin shall be active for at least 32768 32kHz clock period.</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>WKPOL</name>
<description>Wakeup Polarity</description>
<addressOffset>0x08</addressOffset>
<size>16</size>
<fields>
<field>
<name>WKPOL</name>
<description>Wakeup Polarity</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>WKEN</name>
<description>Wakeup Enable</description>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>WKEN</name>
<description>Wakeup Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>WKCAUSE</name>
<description>Wakeup Cause</description>
<addressOffset>0x10</addressOffset>
<size>16</size>
<fields>
<field>
<name>WKCAUSE</name>
<description>Wakeup Cause</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>RTC</name>
<version>1.1.0</version>
<description>Real-Time Counter</description>
<groupName>RTC</groupName>
<prependToName>RTC_</prependToName>
<baseAddress>0x40002000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>RTC</name>
<value>2</value>
</interrupt>
<registers>
<cluster>
<name>MODE0</name>
<description>32-bit Counter with Single 32-bit Compare</description>
<headerStructName>RtcMode0</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>MODE0 Control A</description>
<addressOffset>0x00</addressOffset>
<size>16</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT32</name>
<description>Mode 0: 32-bit Counter</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT16</name>
<description>Mode 1: 16-bit Counter</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLOCK</name>
<description>Mode 2: Clock/Calendar</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>MATCHCLR</name>
<description>Clear on Match</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_CNT = GCLK_RTC/2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_CNT = GCLK_RTC/4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_CNT = GCLK_RTC/8</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_CNT = GCLK_RTC/16</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_CNT = GCLK_RTC/32</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_CNT = GCLK_RTC/64</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_CNT = GCLK_RTC/128</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_CNT = GCLK_RTC/256</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>CLK_RTC_CNT = GCLK_RTC/512</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>CLK_RTC_CNT = GCLK_RTC/1024</description>
<value>0xb</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>COUNTSYNC</name>
<description>Count Read Synchronization Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>MODE0 Event Control</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>PEREO0</name>
<description>Periodic Interval 0 Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO1</name>
<description>Periodic Interval 1 Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO2</name>
<description>Periodic Interval 2 Event Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO3</name>
<description>Periodic Interval 3 Event Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO4</name>
<description>Periodic Interval 4 Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO5</name>
<description>Periodic Interval 5 Event Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO6</name>
<description>Periodic Interval 6 Event Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO7</name>
<description>Periodic Interval 7 Event Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO0</name>
<description>Compare 0 Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Overflow Event Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>MODE0 Interrupt Enable Clear</description>
<addressOffset>0x08</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CMP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>MODE0 Interrupt Enable Set</description>
<addressOffset>0x0A</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>MODE0 Interrupt Flag Status and Clear</description>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x0E</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>MODE0 Synchronization Busy Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable Bit Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FREQCORR</name>
<description>FREQCORR Register Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COUNT</name>
<description>COUNT Register Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMP0</name>
<description>COMP 0 Register Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COUNTSYNC</name>
<description>Count Read Synchronization Enable Bit Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FREQCORR</name>
<description>Frequency Correction</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>VALUE</name>
<description>Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>SIGN</name>
<description>Correction Sign</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>MODE0 Counter Value</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>1</dim>
<dimIncrement>0x4</dimIncrement>
<name>COMP%s</name>
<description>MODE0 Compare n Value</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<fields>
<field>
<name>COMP</name>
<description>Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>GP%s</name>
<description>General Purpose</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
</register>
</cluster> <!-- RtcMode0 -->
<cluster>
<name>MODE1</name>
<description>16-bit Counter with Two 16-bit Compares</description>
<alternateCluster>MODE0</alternateCluster>
<headerStructName>RtcMode1</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>MODE1 Control A</description>
<addressOffset>0x00</addressOffset>
<size>16</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT32</name>
<description>Mode 0: 32-bit Counter</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT16</name>
<description>Mode 1: 16-bit Counter</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLOCK</name>
<description>Mode 2: Clock/Calendar</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_CNT = GCLK_RTC/2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_CNT = GCLK_RTC/4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_CNT = GCLK_RTC/8</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_CNT = GCLK_RTC/16</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_CNT = GCLK_RTC/32</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_CNT = GCLK_RTC/64</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_CNT = GCLK_RTC/128</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_CNT = GCLK_RTC/256</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>CLK_RTC_CNT = GCLK_RTC/512</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>CLK_RTC_CNT = GCLK_RTC/1024</description>
<value>0xb</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>COUNTSYNC</name>
<description>Count Read Synchronization Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>MODE1 Event Control</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>PEREO0</name>
<description>Periodic Interval 0 Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO1</name>
<description>Periodic Interval 1 Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO2</name>
<description>Periodic Interval 2 Event Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO3</name>
<description>Periodic Interval 3 Event Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO4</name>
<description>Periodic Interval 4 Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO5</name>
<description>Periodic Interval 5 Event Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO6</name>
<description>Periodic Interval 6 Event Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO7</name>
<description>Periodic Interval 7 Event Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO0</name>
<description>Compare 0 Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMPEO1</name>
<description>Compare 1 Event Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Overflow Event Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>MODE1 Interrupt Enable Clear</description>
<addressOffset>0x08</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>MODE1 Interrupt Enable Set</description>
<addressOffset>0x0A</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1 Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>MODE1 Interrupt Flag Status and Clear</description>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP1</name>
<description>Compare 1</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x0E</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>MODE1 Synchronization Busy Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Bit Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable Bit Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FREQCORR</name>
<description>FREQCORR Register Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COUNT</name>
<description>COUNT Register Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PER</name>
<description>PER Register Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMP0</name>
<description>COMP 0 Register Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COMP1</name>
<description>COMP 1 Register Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>COUNTSYNC</name>
<description>Count Read Synchronization Enable Bit Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FREQCORR</name>
<description>Frequency Correction</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>VALUE</name>
<description>Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>SIGN</name>
<description>Correction Sign</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>MODE1 Counter Value</description>
<addressOffset>0x18</addressOffset>
<size>16</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER</name>
<description>MODE1 Counter Period</description>
<addressOffset>0x1C</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER</name>
<description>Counter Period</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x2</dimIncrement>
<name>COMP%s</name>
<description>MODE1 Compare n Value</description>
<addressOffset>0x20</addressOffset>
<size>16</size>
<fields>
<field>
<name>COMP</name>
<description>Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>GP%s</name>
<description>General Purpose</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
</register>
</cluster> <!-- RtcMode1 -->
<cluster>
<name>MODE2</name>
<description>Clock/Calendar with Alarm</description>
<alternateCluster>MODE0</alternateCluster>
<headerStructName>RtcMode2</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>MODE2 Control A</description>
<addressOffset>0x00</addressOffset>
<size>16</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT32</name>
<description>Mode 0: 32-bit Counter</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT16</name>
<description>Mode 1: 16-bit Counter</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLOCK</name>
<description>Mode 2: Clock/Calendar</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLKREP</name>
<description>Clock Representation</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MATCHCLR</name>
<description>Clear on Match</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1</name>
<description>CLK_RTC_CNT = GCLK_RTC/1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>CLK_RTC_CNT = GCLK_RTC/2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>CLK_RTC_CNT = GCLK_RTC/4</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>CLK_RTC_CNT = GCLK_RTC/8</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>CLK_RTC_CNT = GCLK_RTC/16</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>CLK_RTC_CNT = GCLK_RTC/32</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>CLK_RTC_CNT = GCLK_RTC/64</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>CLK_RTC_CNT = GCLK_RTC/128</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>CLK_RTC_CNT = GCLK_RTC/256</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>CLK_RTC_CNT = GCLK_RTC/512</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>CLK_RTC_CNT = GCLK_RTC/1024</description>
<value>0xb</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CLOCKSYNC</name>
<description>Clock Read Synchronization Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>MODE2 Event Control</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>PEREO0</name>
<description>Periodic Interval 0 Event Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO1</name>
<description>Periodic Interval 1 Event Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO2</name>
<description>Periodic Interval 2 Event Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO3</name>
<description>Periodic Interval 3 Event Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO4</name>
<description>Periodic Interval 4 Event Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO5</name>
<description>Periodic Interval 5 Event Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO6</name>
<description>Periodic Interval 6 Event Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PEREO7</name>
<description>Periodic Interval 7 Event Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARMEO0</name>
<description>Alarm 0 Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Overflow Event Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>MODE2 Interrupt Enable Clear</description>
<addressOffset>0x08</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM0</name>
<description>Alarm 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>MODE2 Interrupt Enable Set</description>
<addressOffset>0x0A</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0 Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1 Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2 Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3 Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4 Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5 Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6 Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7 Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM0</name>
<description>Alarm 0 Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>MODE2 Interrupt Flag Status and Clear</description>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>PER0</name>
<description>Periodic Interval 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER1</name>
<description>Periodic Interval 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER2</name>
<description>Periodic Interval 2</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER3</name>
<description>Periodic Interval 3</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER4</name>
<description>Periodic Interval 4</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER5</name>
<description>Periodic Interval 5</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER6</name>
<description>Periodic Interval 6</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER7</name>
<description>Periodic Interval 7</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALARM0</name>
<description>Alarm 0</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVF</name>
<description>Overflow</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x0E</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>MODE2 Synchronization Busy Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Bit Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable Bit Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FREQCORR</name>
<description>FREQCORR Register Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLOCK</name>
<description>CLOCK Register Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ALARM0</name>
<description>ALARM 0 Register Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MASK0</name>
<description>MASK 0 Register Busy</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLOCKSYNC</name>
<description>Clock Read Synchronization Enable Bit Busy</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FREQCORR</name>
<description>Frequency Correction</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>VALUE</name>
<description>Correction Value</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>SIGN</name>
<description>Correction Sign</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CLOCK</name>
<description>MODE2 Clock Value</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>SECOND</name>
<description>Second</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>MINUTE</name>
<description>Minute</description>
<bitOffset>6</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>HOUR</name>
<description>Hour</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>HOURSelect</name>
<enumeratedValue>
<name>AM</name>
<description>AM when CLKREP in 12-hour</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PM</name>
<description>PM when CLKREP in 12-hour</description>
<value>0x10</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DAY</name>
<description>Day</description>
<bitOffset>17</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>MONTH</name>
<description>Month</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>YEAR</name>
<description>Year</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<dim>1</dim>
<dimIncrement>0x8</dimIncrement>
<name>ALARM%s</name>
<description>MODE2 Alarm n Value</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<fields>
<field>
<name>SECOND</name>
<description>Second</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>MINUTE</name>
<description>Minute</description>
<bitOffset>6</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>HOUR</name>
<description>Hour</description>
<bitOffset>12</bitOffset>
<bitWidth>5</bitWidth>
<enumeratedValues>
<name>HOURSelect</name>
<enumeratedValue>
<name>AM</name>
<description>Morning hour</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PM</name>
<description>Afternoon hour</description>
<value>0x10</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>DAY</name>
<description>Day</description>
<bitOffset>17</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>MONTH</name>
<description>Month</description>
<bitOffset>22</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>YEAR</name>
<description>Year</description>
<bitOffset>26</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<dim>1</dim>
<dimIncrement>0x8</dimIncrement>
<name>MASK%s</name>
<description>MODE2 Alarm n Mask</description>
<addressOffset>0x24</addressOffset>
<size>8</size>
<fields>
<field>
<name>SEL</name>
<description>Alarm Mask Selection</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>SELSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Alarm Disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SS</name>
<description>Match seconds only</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>MMSS</name>
<description>Match seconds and minutes only</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HHMMSS</name>
<description>Match seconds, minutes, and hours only</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DDHHMMSS</name>
<description>Match seconds, minutes, hours, and days only</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>MMDDHHMMSS</name>
<description>Match seconds, minutes, hours, days, and months only</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>YYMMDDHHMMSS</name>
<description>Match seconds, minutes, hours, days, months, and years</description>
<value>0x6</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>GP%s</name>
<description>General Purpose</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
</register>
</cluster> <!-- RtcMode2 -->
</registers>
</peripheral>
<peripheral>
<name>SERCOM0</name>
<version>2.2.0</version>
<description>Serial Communication Interface 0</description>
<groupName>SERCOM</groupName>
<prependToName>SERCOM_</prependToName>
<baseAddress>0x42000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x40</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SERCOM0</name>
<value>8</value>
</interrupt>
<registers>
<cluster>
<name>I2CM</name>
<description>I2C Master Mode</description>
<headerStructName>SercomI2cm</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>I2CM Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINOUT</name>
<description>Pin Usage</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDAHOLD</name>
<description>SDA Hold Time</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>MEXTTOEN</name>
<description>Master SCL Low Extend Timeout</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEXTTOEN</name>
<description>Slave SCL Low Extend Timeout</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPEED</name>
<description>Transfer Speed</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCLSM</name>
<description>SCL Clock Stretch Mode</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INACTOUT</name>
<description>Inactive Time-Out</description>
<bitOffset>28</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LOWTOUTEN</name>
<description>SCL Low Timeout Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>I2CM Control B</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>SMEN</name>
<description>Smart Mode Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QCEN</name>
<description>Quick Command Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKACT</name>
<description>Acknowledge Action</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>I2CM Baud Rate</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>BAUDLOW</name>
<description>Baud Rate Value Low</description>
<bitOffset>8</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>HSBAUD</name>
<description>High Speed Baud Rate Value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>HSBAUDLOW</name>
<description>High Speed Baud Rate Value Low</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>I2CM Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>MB</name>
<description>Master On Bus Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SB</name>
<description>Slave On Bus Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>I2CM Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<fields>
<field>
<name>MB</name>
<description>Master On Bus Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SB</name>
<description>Slave On Bus Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>I2CM Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<fields>
<field>
<name>MB</name>
<description>Master On Bus Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SB</name>
<description>Slave On Bus Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>I2CM Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<fields>
<field>
<name>BUSERR</name>
<description>Bus Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ARBLOST</name>
<description>Arbitration Lost</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNACK</name>
<description>Received Not Acknowledge</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BUSSTATE</name>
<description>Bus State</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LOWTOUT</name>
<description>SCL Low Timeout</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLKHOLD</name>
<description>Clock Hold</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>MEXTTOUT</name>
<description>Master SCL Low Extend Timeout</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEXTTOUT</name>
<description>Slave SCL Low Extend Timeout</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LENERR</name>
<description>Length Error</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>I2CM Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SYSOP</name>
<description>System Operation Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>I2CM Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>ADDR</name>
<description>Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>11</bitWidth>
</field>
<field>
<name>LENEN</name>
<description>Length Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HS</name>
<description>High Speed Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TENBITEN</name>
<description>Ten Bit Addressing Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LEN</name>
<description>Length</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>I2CM Data</description>
<addressOffset>0x28</addressOffset>
<size>8</size>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>I2CM Debug Control</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGSTOP</name>
<description>Debug Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- SercomI2cm -->
<cluster>
<name>I2CS</name>
<description>I2C Slave Mode</description>
<alternateCluster>I2CM</alternateCluster>
<headerStructName>SercomI2cs</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>I2CS Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PINOUT</name>
<description>Pin Usage</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SDAHOLD</name>
<description>SDA Hold Time</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SEXTTOEN</name>
<description>Slave SCL Low Extend Timeout</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPEED</name>
<description>Transfer Speed</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SCLSM</name>
<description>SCL Clock Stretch Mode</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LOWTOUTEN</name>
<description>SCL Low Timeout Enable</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>I2CS Control B</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>SMEN</name>
<description>Smart Mode Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GCMD</name>
<description>PMBus Group Command</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AACKEN</name>
<description>Automatic Address Acknowledge</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMODE</name>
<description>Address Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ACKACT</name>
<description>Acknowledge Action</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>I2CS Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>PREC</name>
<description>Stop Received Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMATCH</name>
<description>Address Match Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRDY</name>
<description>Data Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>I2CS Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<fields>
<field>
<name>PREC</name>
<description>Stop Received Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMATCH</name>
<description>Address Match Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRDY</name>
<description>Data Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>I2CS Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<fields>
<field>
<name>PREC</name>
<description>Stop Received Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMATCH</name>
<description>Address Match Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DRDY</name>
<description>Data Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>I2CS Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<fields>
<field>
<name>BUSERR</name>
<description>Bus Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLL</name>
<description>Transmit Collision</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXNACK</name>
<description>Received Not Acknowledge</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DIR</name>
<description>Read/Write Direction</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SR</name>
<description>Repeated Start</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>LOWTOUT</name>
<description>SCL Low Timeout</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CLKHOLD</name>
<description>Clock Hold</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SEXTTOUT</name>
<description>Slave SCL Low Extend Timeout</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HS</name>
<description>High Speed</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>I2CS Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>I2CS Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>GENCEN</name>
<description>General Call Address Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDR</name>
<description>Address Value</description>
<bitOffset>1</bitOffset>
<bitWidth>10</bitWidth>
</field>
<field>
<name>TENBITEN</name>
<description>Ten Bit Addressing Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ADDRMASK</name>
<description>Address Mask</description>
<bitOffset>17</bitOffset>
<bitWidth>10</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>I2CS Data</description>
<addressOffset>0x28</addressOffset>
<size>8</size>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- SercomI2cs -->
<cluster>
<name>SPI</name>
<description>SPI Mode</description>
<alternateCluster>I2CM</alternateCluster>
<headerStructName>SercomSpi</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>SPI Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IBON</name>
<description>Immediate Buffer Overflow Notification</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DOPO</name>
<description>Data Out Pinout</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DIPO</name>
<description>Data In Pinout</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FORM</name>
<description>Frame Format</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CPHA</name>
<description>Clock Phase</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DORD</name>
<description>Data Order</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>SPI Control B</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>CHSIZE</name>
<description>Character Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>PLOADEN</name>
<description>Data Preload Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSDE</name>
<description>Slave Select Low Detect Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSSEN</name>
<description>Master Slave Select Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>AMODE</name>
<description>Address Mode</description>
<bitOffset>14</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>SPI Baud Rate</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>SPI Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>SPI Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>SPI Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SSL</name>
<description>Slave Select Low Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>SPI Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<fields>
<field>
<name>BUFOVF</name>
<description>Buffer Overflow</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>SPI Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>ADDR</name>
<description>SPI Address</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>ADDR</name>
<description>Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>ADDRMASK</name>
<description>Address Mask</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>SPI Data</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>SPI Debug Control</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGSTOP</name>
<description>Debug Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- SercomSpi -->
<cluster>
<name>USART</name>
<description>USART Mode</description>
<alternateCluster>I2CM</alternateCluster>
<headerStructName>SercomUsart</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>USART Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IBON</name>
<description>Immediate Buffer Overflow Notification</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SAMPR</name>
<description>Sample</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>TXPO</name>
<description>Transmit Data Pinout</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>RXPO</name>
<description>Receive Data Pinout</description>
<bitOffset>20</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>SAMPA</name>
<description>Sample Adjustment</description>
<bitOffset>22</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>FORM</name>
<description>Frame Format</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CMODE</name>
<description>Communication Mode</description>
<bitOffset>28</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPOL</name>
<description>Clock Polarity</description>
<bitOffset>29</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DORD</name>
<description>Data Order</description>
<bitOffset>30</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>USART Control B</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>CHSIZE</name>
<description>Character Size</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>SBMODE</name>
<description>Stop Bit Mode</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLDEN</name>
<description>Collision Detection Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SFDE</name>
<description>Start of Frame Detection Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENC</name>
<description>Encoding Format</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PMODE</name>
<description>Parity Mode</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXEN</name>
<description>Transmitter Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXEN</name>
<description>Receiver Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD</name>
<description>USART Baud Rate</description>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_FRAC_MODE</name>
<description>USART Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_FRACFP_MODE</name>
<description>USART Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>13</bitWidth>
</field>
<field>
<name>FP</name>
<description>Fractional Part</description>
<bitOffset>13</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<name>BAUD_USARTFP_MODE</name>
<description>USART Baud Rate</description>
<alternateRegister>BAUD</alternateRegister>
<addressOffset>0x0C</addressOffset>
<size>16</size>
<fields>
<field>
<name>BAUD</name>
<description>Baud Rate Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<name>RXPL</name>
<description>USART Receive Pulse Length</description>
<addressOffset>0x0E</addressOffset>
<size>8</size>
<fields>
<field>
<name>RXPL</name>
<description>Receive Pulse Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>USART Interrupt Enable Clear</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>USART Interrupt Enable Set</description>
<addressOffset>0x16</addressOffset>
<size>8</size>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>USART Interrupt Flag Status and Clear</description>
<addressOffset>0x18</addressOffset>
<size>8</size>
<fields>
<field>
<name>DRE</name>
<description>Data Register Empty Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>TXC</name>
<description>Transmit Complete Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXC</name>
<description>Receive Complete Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>RXS</name>
<description>Receive Start Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CTSIC</name>
<description>Clear To Send Input Change Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXBRK</name>
<description>Break Received Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERROR</name>
<description>Combined Error Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>USART Status</description>
<addressOffset>0x1A</addressOffset>
<size>16</size>
<fields>
<field>
<name>PERR</name>
<description>Parity Error</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FERR</name>
<description>Frame Error</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUFOVF</name>
<description>Buffer Overflow</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTS</name>
<description>Clear To Send</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ISF</name>
<description>Inconsistent Sync Field</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COLL</name>
<description>Collision Detected</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>USART Synchronization Busy</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>SERCOM Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB Synchronization Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>USART Data</description>
<addressOffset>0x28</addressOffset>
<size>16</size>
<fields>
<field>
<name>DATA</name>
<description>Data Value</description>
<bitOffset>0</bitOffset>
<bitWidth>9</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>USART Debug Control</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGSTOP</name>
<description>Debug Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- SercomUsart -->
</registers>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM1</name>
<description>Serial Communication Interface 1</description>
<baseAddress>0x42000400</baseAddress>
<interrupt>
<name>SERCOM1</name>
<value>9</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM2</name>
<description>Serial Communication Interface 2</description>
<baseAddress>0x42000800</baseAddress>
<interrupt>
<name>SERCOM2</name>
<value>10</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM3</name>
<description>Serial Communication Interface 3</description>
<baseAddress>0x42000C00</baseAddress>
<interrupt>
<name>SERCOM3</name>
<value>11</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM4</name>
<description>Serial Communication Interface 4</description>
<baseAddress>0x42001000</baseAddress>
<interrupt>
<name>SERCOM4</name>
<value>12</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="SERCOM0">
<name>SERCOM5</name>
<description>Serial Communication Interface 5</description>
<baseAddress>0x43000400</baseAddress>
<interrupt>
<name>SERCOM5</name>
<value>13</value>
</interrupt>
</peripheral>
<peripheral>
<name>SUPC</name>
<version>1.1.0</version>
<description>Supply Controller</description>
<groupName>SUPC</groupName>
<prependToName>SUPC_</prependToName>
<baseAddress>0x40001400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x80</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>SYSTEM</name>
<value>0</value>
</interrupt>
<registers>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>BOD33RDY</name>
<description>BOD33 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD33DET</name>
<description>BOD33 Detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B33SRDY</name>
<description>BOD33 Synchronization Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD12RDY</name>
<description>BOD12 Ready</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD12DET</name>
<description>BOD12 Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B12SRDY</name>
<description>BOD12 Synchronization Ready</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREGRDY</name>
<description>Voltage Regulator Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>APWSRDY</name>
<description>Automatic Power Switch Ready</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VCORERDY</name>
<description>VDDCORE Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x04</addressOffset>
<size>32</size>
<fields>
<field>
<name>BOD33RDY</name>
<description>BOD33 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD33DET</name>
<description>BOD33 Detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B33SRDY</name>
<description>BOD33 Synchronization Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD12RDY</name>
<description>BOD12 Ready</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD12DET</name>
<description>BOD12 Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B12SRDY</name>
<description>BOD12 Synchronization Ready</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREGRDY</name>
<description>Voltage Regulator Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>APWSRDY</name>
<description>Automatic Power Switch Ready</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VCORERDY</name>
<description>VDDCORE Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<fields>
<field>
<name>BOD33RDY</name>
<description>BOD33 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD33DET</name>
<description>BOD33 Detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B33SRDY</name>
<description>BOD33 Synchronization Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD12RDY</name>
<description>BOD12 Ready</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BOD12DET</name>
<description>BOD12 Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>B12SRDY</name>
<description>BOD12 Synchronization Ready</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREGRDY</name>
<description>Voltage Regulator Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>APWSRDY</name>
<description>Automatic Power Switch Ready</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VCORERDY</name>
<description>VDDCORE Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Power and Clocks Status</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>BOD33RDY</name>
<description>BOD33 Ready</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BOD33DET</name>
<description>BOD33 Detection</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>B33SRDY</name>
<description>BOD33 Synchronization Ready</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BOD12RDY</name>
<description>BOD12 Ready</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BOD12DET</name>
<description>BOD12 Detection</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>B12SRDY</name>
<description>BOD12 Synchronization Ready</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>VREGRDY</name>
<description>Voltage Regulator Ready</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>APWSRDY</name>
<description>Automatic Power Switch Ready</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>VCORERDY</name>
<description>VDDCORE Ready</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BBPS</name>
<description>Battery Backup Power Switch</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>BOD33</name>
<description>BOD33 Control</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HYST</name>
<description>Hysteresis Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACTION</name>
<description>Action when Threshold Crossed</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>ACTIONSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>The BOD33 generates a reset</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>The BOD33 generates an interrupt</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BKUP</name>
<description>The BOD33 puts the device in backup sleep mode if VMON=0</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STDBYCFG</name>
<description>Configuration in Standby mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNBKUP</name>
<description>Configuration in Backup mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACTCFG</name>
<description>Configuration in Active mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VMON</name>
<description>Voltage Monitored in active and standby mode</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSEL</name>
<description>Prescaler Select</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PSELSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>Divide clock by 2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide clock by 4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide clock by 8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide clock by 16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide clock by 32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide clock by 64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide clock by 128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Divide clock by 256</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>Divide clock by 512</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Divide clock by 1024</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2048</name>
<description>Divide clock by 2048</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4096</name>
<description>Divide clock by 4096</description>
<value>0xb</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8192</name>
<description>Divide clock by 8192</description>
<value>0xc</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16384</name>
<description>Divide clock by 16384</description>
<value>0xd</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32768</name>
<description>Divide clock by 32768</description>
<value>0xe</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV65536</name>
<description>Divide clock by 65536</description>
<value>0xf</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LEVEL</name>
<description>Threshold Level for VDD</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>BKUPLEVEL</name>
<description>Threshold Level in backup sleep mode or for VBAT</description>
<bitOffset>24</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>BOD12</name>
<description>BOD12 Control</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HYST</name>
<description>Hysteresis Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACTION</name>
<description>Action when Threshold Crossed</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>ACTIONSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>The BOD12 generates a reset</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>INT</name>
<description>The BOD12 generates an interrupt</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STDBYCFG</name>
<description>Configuration in Standby mode</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ACTCFG</name>
<description>Configuration in Active mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSEL</name>
<description>Prescaler Select</description>
<bitOffset>12</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PSELSelect</name>
<enumeratedValue>
<name>DIV2</name>
<description>Divide clock by 2</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide clock by 4</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide clock by 8</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide clock by 16</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32</name>
<description>Divide clock by 32</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide clock by 64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV128</name>
<description>Divide clock by 128</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Divide clock by 256</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV512</name>
<description>Divide clock by 512</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Divide clock by 1024</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2048</name>
<description>Divide clock by 2048</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4096</name>
<description>Divide clock by 4096</description>
<value>0xb</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8192</name>
<description>Divide clock by 8192</description>
<value>0xc</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16384</name>
<description>Divide clock by 16384</description>
<value>0xd</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV32768</name>
<description>Divide clock by 32768</description>
<value>0xe</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV65536</name>
<description>Divide clock by 65536</description>
<value>0xf</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LEVEL</name>
<description>Threshold Level</description>
<bitOffset>16</bitOffset>
<bitWidth>6</bitWidth>
</field>
</fields>
</register>
<register>
<name>VREG</name>
<description>VREG Control</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEL</name>
<description>Voltage Regulator Selection in active mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SELSelect</name>
<enumeratedValue>
<name>LDO</name>
<description>LDO selection</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>BUCK</name>
<description>Buck selection</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SCVREG</name>
<description>Switched Cap selection</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>STDBYPL0</name>
<description>Standby in PL0</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPEFF</name>
<description>Low Power Efficiency</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VSVSTEP</name>
<description>Voltage Scaling Voltage Step</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>VSPER</name>
<description>Voltage Scaling Period</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>VREF</name>
<description>VREF Control</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>TSEN</name>
<description>Temperature Sensor Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VREFOE</name>
<description>Voltage Reference Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>On Demand Contrl</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SEL</name>
<description>Voltage Reference Selection</description>
<bitOffset>16</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>SELSelect</name>
<enumeratedValue>
<name>1V0</name>
<description>1.0V voltage reference typical value</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1V1</name>
<description>1.1V voltage reference typical value</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>1V2</name>
<description>1.2V voltage reference typical value</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>1V25</name>
<description>1.25V voltage reference typical value</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>2V0</name>
<description>2.0V voltage reference typical value</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>2V2</name>
<description>2.2V voltage reference typical value</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>2V4</name>
<description>2.4V voltage reference typical value</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>2V5</name>
<description>2.5V voltage reference typical value</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>BBPS</name>
<description>Battery Backup Power Switch</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<fields>
<field>
<name>CONF</name>
<description>Battery Backup Configuration</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CONFSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>The backup domain is always supplied by main power</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>APWS</name>
<description>The power switch is handled by the automatic power switch</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FORCED</name>
<description>The backup domain is always supplied by battery backup power</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOD33</name>
<description>The power switch is handled by the BOD33</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WAKEEN</name>
<description>Wake Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PSOKEN</name>
<description>Power Supply OK Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>BKOUT</name>
<description>Backup Output Control</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>EN</name>
<description>Enable Output</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>CLR</name>
<description>Clear Output</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
</field>
<field>
<name>SET</name>
<description>Set Output</description>
<bitOffset>16</bitOffset>
<bitWidth>2</bitWidth>
<access>write-only</access>
</field>
<field>
<name>RTCTGL</name>
<description>RTC Toggle Output</description>
<bitOffset>24</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>BKIN</name>
<description>Backup Input Control</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>BKIN</name>
<description>Backup Input Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>TC0</name>
<version>2.0.0</version>
<description>Basic Timer Counter 0</description>
<groupName>TC</groupName>
<prependToName>TC_</prependToName>
<baseAddress>0x42002000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x40</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TC0</name>
<value>17</value>
</interrupt>
<registers>
<cluster>
<name>COUNT8</name>
<description>8-bit Counter Mode</description>
<headerStructName>TcCount8</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Timer Counter Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT16</name>
<description>Counter in 16-bit mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT8</name>
<description>Counter in 8-bit mode</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT32</name>
<description>Counter in 32-bit mode</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCSYNC</name>
<description>Prescaler and Counter Synchronization</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSYNCSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Reload or reset the counter on next generic clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESC</name>
<description>Reload or reset the counter on next prescaler clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNC</name>
<description>Reload or reset the counter on next generic clock and reset the prescaler counter</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>Clock On Demand</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Prescaler: GCLK_TC</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Prescaler: GCLK_TC/2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Prescaler: GCLK_TC/4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Prescaler: GCLK_TC/8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Prescaler: GCLK_TC/16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Prescaler: GCLK_TC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Prescaler: GCLK_TC/256</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Prescaler: GCLK_TC/1024</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN0</name>
<description>Capture Channel 0 Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN1</name>
<description>Capture Channel 1 Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN0</name>
<description>Capture On Pin 0 Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN1</name>
<description>Capture On Pin 1 Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x06</addressOffset>
<size>16</size>
<fields>
<field>
<name>EVACT</name>
<description>Event Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or retrigger TC on event</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on event</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start TC on event</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>STAMP</name>
<description>Time stamp capture</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>PPW</name>
<description>Period captured in CC0, pulse width in CC1</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWP</name>
<description>Period captured in CC1, pulse width in CC0</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PW</name>
<description>Pulse width capture</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCINV</name>
<description>TC Event Input Polarity</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI</name>
<description>TC Event Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>MC Event Output Enable 0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>MC Event Output Enable 1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x08</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Disable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Disable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x09</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Enable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Enable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x0A</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Flag 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Flag 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x0B</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>STOP</name>
<description>Stop Status Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SLAVE</name>
<description>Slave Status Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PERBUFV</name>
<description>Synchronization Busy Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare channel buffer 0 valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare channel buffer 1 valid</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WAVE</name>
<description>Waveform Generation Control</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>WAVEGEN</name>
<description>Waveform Generation Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WAVEGENSelect</name>
<enumeratedValue>
<name>NFRQ</name>
<description>Normal frequency</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MFRQ</name>
<description>Match frequency</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>NPWM</name>
<description>Normal PWM</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MPWM</name>
<description>Match PWM</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DRVCTRL</name>
<description>Control C</description>
<addressOffset>0x0D</addressOffset>
<size>8</size>
<fields>
<field>
<name>INVEN0</name>
<description>Output Waveform Invert Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN1</name>
<description>Output Waveform Invert Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x0F</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>swrst</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>STATUS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Counter</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>COUNT8 Count</description>
<addressOffset>0x14</addressOffset>
<size>8</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER</name>
<description>COUNT8 Period</description>
<addressOffset>0x1B</addressOffset>
<size>8</size>
<resetValue>0xFF</resetValue>
<fields>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x1</dimIncrement>
<name>CC%s</name>
<description>COUNT8 Compare and Capture</description>
<addressOffset>0x1C</addressOffset>
<size>8</size>
<fields>
<field>
<name>CC</name>
<description>Counter/Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF</name>
<description>COUNT8 Period Buffer</description>
<addressOffset>0x2F</addressOffset>
<size>8</size>
<resetValue>0xFF</resetValue>
<fields>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x1</dimIncrement>
<name>CCBUF%s</name>
<description>COUNT8 Compare and Capture Buffer</description>
<addressOffset>0x30</addressOffset>
<size>8</size>
<fields>
<field>
<name>CCBUF</name>
<description>Counter/Compare Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- TcCount8 -->
<cluster>
<name>COUNT16</name>
<description>16-bit Counter Mode</description>
<alternateCluster>COUNT8</alternateCluster>
<headerStructName>TcCount16</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Timer Counter Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT16</name>
<description>Counter in 16-bit mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT8</name>
<description>Counter in 8-bit mode</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT32</name>
<description>Counter in 32-bit mode</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCSYNC</name>
<description>Prescaler and Counter Synchronization</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSYNCSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Reload or reset the counter on next generic clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESC</name>
<description>Reload or reset the counter on next prescaler clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNC</name>
<description>Reload or reset the counter on next generic clock and reset the prescaler counter</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>Clock On Demand</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Prescaler: GCLK_TC</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Prescaler: GCLK_TC/2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Prescaler: GCLK_TC/4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Prescaler: GCLK_TC/8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Prescaler: GCLK_TC/16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Prescaler: GCLK_TC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Prescaler: GCLK_TC/256</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Prescaler: GCLK_TC/1024</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN0</name>
<description>Capture Channel 0 Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN1</name>
<description>Capture Channel 1 Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN0</name>
<description>Capture On Pin 0 Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN1</name>
<description>Capture On Pin 1 Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x06</addressOffset>
<size>16</size>
<fields>
<field>
<name>EVACT</name>
<description>Event Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or retrigger TC on event</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on event</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start TC on event</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>STAMP</name>
<description>Time stamp capture</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>PPW</name>
<description>Period captured in CC0, pulse width in CC1</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWP</name>
<description>Period captured in CC1, pulse width in CC0</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PW</name>
<description>Pulse width capture</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCINV</name>
<description>TC Event Input Polarity</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI</name>
<description>TC Event Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>MC Event Output Enable 0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>MC Event Output Enable 1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x08</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Disable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Disable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x09</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Enable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Enable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x0A</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Flag 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Flag 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x0B</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>STOP</name>
<description>Stop Status Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SLAVE</name>
<description>Slave Status Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PERBUFV</name>
<description>Synchronization Busy Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare channel buffer 0 valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare channel buffer 1 valid</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WAVE</name>
<description>Waveform Generation Control</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>WAVEGEN</name>
<description>Waveform Generation Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WAVEGENSelect</name>
<enumeratedValue>
<name>NFRQ</name>
<description>Normal frequency</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MFRQ</name>
<description>Match frequency</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>NPWM</name>
<description>Normal PWM</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MPWM</name>
<description>Match PWM</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DRVCTRL</name>
<description>Control C</description>
<addressOffset>0x0D</addressOffset>
<size>8</size>
<fields>
<field>
<name>INVEN0</name>
<description>Output Waveform Invert Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN1</name>
<description>Output Waveform Invert Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x0F</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>swrst</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>STATUS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Counter</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>COUNT16 Count</description>
<addressOffset>0x14</addressOffset>
<size>16</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x2</dimIncrement>
<name>CC%s</name>
<description>COUNT16 Compare and Capture</description>
<addressOffset>0x1C</addressOffset>
<size>16</size>
<fields>
<field>
<name>CC</name>
<description>Counter/Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x2</dimIncrement>
<name>CCBUF%s</name>
<description>COUNT16 Compare and Capture Buffer</description>
<addressOffset>0x30</addressOffset>
<size>16</size>
<fields>
<field>
<name>CCBUF</name>
<description>Counter/Compare Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>16</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- TcCount16 -->
<cluster>
<name>COUNT32</name>
<description>32-bit Counter Mode</description>
<alternateCluster>COUNT8</alternateCluster>
<headerStructName>TcCount32</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Timer Counter Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>COUNT16</name>
<description>Counter in 16-bit mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT8</name>
<description>Counter in 8-bit mode</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT32</name>
<description>Counter in 32-bit mode</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCSYNC</name>
<description>Prescaler and Counter Synchronization</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSYNCSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Reload or reset the counter on next generic clock</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESC</name>
<description>Reload or reset the counter on next prescaler clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNC</name>
<description>Reload or reset the counter on next generic clock and reset the prescaler counter</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run during Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONDEMAND</name>
<description>Clock On Demand</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>Prescaler: GCLK_TC</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Prescaler: GCLK_TC/2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Prescaler: GCLK_TC/4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Prescaler: GCLK_TC/8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Prescaler: GCLK_TC/16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Prescaler: GCLK_TC/64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Prescaler: GCLK_TC/256</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Prescaler: GCLK_TC/1024</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN0</name>
<description>Capture Channel 0 Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CAPTEN1</name>
<description>Capture Channel 1 Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN0</name>
<description>Capture On Pin 0 Enable</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COPEN1</name>
<description>Capture On Pin 1 Enable</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot on Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMD</name>
<description>Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Force a start, restart or retrigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force a stop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update of double-buffered register</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force a read synchronization of COUNT</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x06</addressOffset>
<size>16</size>
<fields>
<field>
<name>EVACT</name>
<description>Event Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACTSelect</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or retrigger TC on event</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on event</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start TC on event</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>STAMP</name>
<description>Time stamp capture</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>PPW</name>
<description>Period captured in CC0, pulse width in CC1</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWP</name>
<description>Period captured in CC1, pulse width in CC0</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>PW</name>
<description>Pulse width capture</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>TCINV</name>
<description>TC Event Input Polarity</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI</name>
<description>TC Event Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OVFEO</name>
<description>Event Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>MC Event Output Enable 0</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>MC Event Output Enable 1</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x08</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Disable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Disable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x09</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Enable 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Enable 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x0A</addressOffset>
<size>8</size>
<fields>
<field>
<name>OVF</name>
<description>OVF Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>ERR Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>MC Interrupt Flag 0</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>MC Interrupt Flag 1</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x0B</addressOffset>
<size>8</size>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>STOP</name>
<description>Stop Status Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>SLAVE</name>
<description>Slave Status Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PERBUFV</name>
<description>Synchronization Busy Status</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare channel buffer 0 valid</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare channel buffer 1 valid</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WAVE</name>
<description>Waveform Generation Control</description>
<addressOffset>0x0C</addressOffset>
<size>8</size>
<fields>
<field>
<name>WAVEGEN</name>
<description>Waveform Generation Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>WAVEGENSelect</name>
<enumeratedValue>
<name>NFRQ</name>
<description>Normal frequency</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MFRQ</name>
<description>Match frequency</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>NPWM</name>
<description>Normal PWM</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>MPWM</name>
<description>Match PWM</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DRVCTRL</name>
<description>Control C</description>
<addressOffset>0x0D</addressOffset>
<size>8</size>
<fields>
<field>
<name>INVEN0</name>
<description>Output Waveform Invert Enable 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN1</name>
<description>Output Waveform Invert Enable 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x0F</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Run During Debug</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Status</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>swrst</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>CTRLB</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>STATUS</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Counter</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>COUNT32 Count</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x4</dimIncrement>
<name>CC%s</name>
<description>COUNT32 Compare and Capture</description>
<addressOffset>0x1C</addressOffset>
<size>32</size>
<fields>
<field>
<name>CC</name>
<description>Counter/Compare Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<dim>2</dim>
<dimIncrement>0x4</dimIncrement>
<name>CCBUF%s</name>
<description>COUNT32 Compare and Capture Buffer</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<fields>
<field>
<name>CCBUF</name>
<description>Counter/Compare Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- TcCount32 -->
</registers>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC1</name>
<description>Basic Timer Counter 1</description>
<baseAddress>0x42002400</baseAddress>
<interrupt>
<name>TC1</name>
<value>18</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC2</name>
<description>Basic Timer Counter 2</description>
<baseAddress>0x42002800</baseAddress>
<interrupt>
<name>TC2</name>
<value>19</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC3</name>
<description>Basic Timer Counter 3</description>
<baseAddress>0x42002C00</baseAddress>
<interrupt>
<name>TC3</name>
<value>20</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TC0">
<name>TC4</name>
<description>Basic Timer Counter 4</description>
<baseAddress>0x43000800</baseAddress>
<interrupt>
<name>TC4</name>
<value>21</value>
</interrupt>
</peripheral>
<peripheral>
<name>TCC0</name>
<version>3.0.0</version>
<description>Timer Counter Control 0</description>
<groupName>TCC</groupName>
<prependToName>TCC_</prependToName>
<baseAddress>0x42001400</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x090</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TCC0</name>
<value>14</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>32</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RESOLUTION</name>
<description>Enhanced Resolution</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RESOLUTIONSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>Dithering is disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DITH4</name>
<description>Dithering is done every 16 PWM frames</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DITH5</name>
<description>Dithering is done every 32 PWM frames</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DITH6</name>
<description>Dithering is done every 64 PWM frames</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>PRESCALER</name>
<description>Prescaler</description>
<bitOffset>8</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>PRESCALERSelect</name>
<enumeratedValue>
<name>DIV1</name>
<description>No division</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV2</name>
<description>Divide by 2</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV4</name>
<description>Divide by 4</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV8</name>
<description>Divide by 8</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV16</name>
<description>Divide by 16</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV64</name>
<description>Divide by 64</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV256</name>
<description>Divide by 256</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DIV1024</name>
<description>Divide by 1024</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PRESCSYNC</name>
<description>Prescaler and Counter Synchronization Selection</description>
<bitOffset>12</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>PRESCSYNCSelect</name>
<enumeratedValue>
<name>GCLK</name>
<description>Reload or reset counter on next GCLK</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>PRESC</name>
<description>Reload or reset counter on next prescaler clock</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RESYNC</name>
<description>Reload or reset counter on next GCLK and reset prescaler counter</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>ALOCK</name>
<description>Auto Lock</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSYNC</name>
<description>Master Synchronization (only for TCC Slave Instance)</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DMAOS</name>
<description>DMA One-shot Trigger Mode</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN0</name>
<description>Capture Channel 0 Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN1</name>
<description>Capture Channel 1 Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN2</name>
<description>Capture Channel 2 Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CPTEN3</name>
<description>Capture Channel 3 Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLBCLR</name>
<description>Control B Clear</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDXCMD</name>
<description>Ramp Index Command</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IDXCMDSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Command disabled: Index toggles between cycles A and B</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set index: cycle B will be forced in the next cycle</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear index: cycle A will be forced in the next cycle</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HOLD</name>
<description>Hold index: the next cycle will be the same as the current cycle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMD</name>
<description>TCC Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Clear start, restart or retrigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force stop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update or double buffered registers</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force COUNT read synchronization</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>CTRLBSET</name>
<description>Control B Set</description>
<addressOffset>0x05</addressOffset>
<size>8</size>
<fields>
<field>
<name>DIR</name>
<description>Counter Direction</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LUPD</name>
<description>Lock Update</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ONESHOT</name>
<description>One-Shot</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>IDXCMD</name>
<description>Ramp Index Command</description>
<bitOffset>3</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>IDXCMDSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Command disabled: Index toggles between cycles A and B</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>SET</name>
<description>Set index: cycle B will be forced in the next cycle</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CLEAR</name>
<description>Clear index: cycle A will be forced in the next cycle</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HOLD</name>
<description>Hold index: the next cycle will be the same as the current cycle</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CMD</name>
<description>TCC Command</description>
<bitOffset>5</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CMDSelect</name>
<enumeratedValue>
<name>NONE</name>
<description>No action</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Clear start, restart or retrigger</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Force stop</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>UPDATE</name>
<description>Force update or double buffered registers</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>READSYNC</name>
<description>Force COUNT read synchronization</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DMAOS</name>
<description>One-shot DMA trigger</description>
<value>0x5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x08</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Swrst Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CTRLB</name>
<description>Ctrlb Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STATUS</name>
<description>Status Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>COUNT</name>
<description>Count Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PATT</name>
<description>Pattern Busy</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAVE</name>
<description>Wave Busy</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period Busy</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC0</name>
<description>Compare Channel 0 Busy</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC1</name>
<description>Compare Channel 1 Busy</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC2</name>
<description>Compare Channel 2 Busy</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CC3</name>
<description>Compare Channel 3 Busy</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>FCTRLA</name>
<description>Recoverable Fault A Configuration</description>
<addressOffset>0x0C</addressOffset>
<size>32</size>
<fields>
<field>
<name>SRC</name>
<description>Fault A Source</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SRCSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Fault input disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>MCEx (x=0,1) event input</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>INVERT</name>
<description>Inverted MCEx (x=0,1) event input</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ALTFAULT</name>
<description>Alternate fault (A or B) state at the end of the previous period</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>KEEP</name>
<description>Fault A Keeper</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QUAL</name>
<description>Fault A Qualification</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANK</name>
<description>Fault A Blanking Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>BLANKSelect</name>
<enumeratedValue>
<name>START</name>
<description>Blanking applied from start of the ramp</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Blanking applied from rising edge of the output waveform</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Blanking applied from falling edge of the output waveform</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Blanking applied from each toggle of the output waveform</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RESTART</name>
<description>Fault A Restart</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALT</name>
<description>Fault A Halt Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>HALTSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Halt action disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HW</name>
<description>Hardware halt action</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SW</name>
<description>Software halt action</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>NR</name>
<description>Non-recoverable fault</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHSEL</name>
<description>Fault A Capture Channel</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CHSELSelect</name>
<enumeratedValue>
<name>CC0</name>
<description>Capture value stored in channel 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CC1</name>
<description>Capture value stored in channel 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CC2</name>
<description>Capture value stored in channel 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CC3</name>
<description>Capture value stored in channel 3</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CAPTURE</name>
<description>Fault A Capture Action</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CAPTURESelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>No capture</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPT</name>
<description>Capture on fault</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCMIN</name>
<description>Minimum local detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCMAX</name>
<description>Maximum local detection</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DERIV0</name>
<description>Minimum and maximum local detection</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMARK</name>
<description>Capture with ramp index as MSB value</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLANKPRESC</name>
<description>Fault A Blanking Prescaler</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANKVAL</name>
<description>Fault A Blanking Time</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FILTERVAL</name>
<description>Fault A Filter Value</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>FCTRLB</name>
<description>Recoverable Fault B Configuration</description>
<addressOffset>0x10</addressOffset>
<size>32</size>
<fields>
<field>
<name>SRC</name>
<description>Fault B Source</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SRCSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Fault input disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ENABLE</name>
<description>MCEx (x=0,1) event input</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>INVERT</name>
<description>Inverted MCEx (x=0,1) event input</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>ALTFAULT</name>
<description>Alternate fault (A or B) state at the end of the previous period</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>KEEP</name>
<description>Fault B Keeper</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>QUAL</name>
<description>Fault B Qualification</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANK</name>
<description>Fault B Blanking Mode</description>
<bitOffset>5</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>BLANKSelect</name>
<enumeratedValue>
<name>START</name>
<description>Blanking applied from start of the ramp</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RISE</name>
<description>Blanking applied from rising edge of the output waveform</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>FALL</name>
<description>Blanking applied from falling edge of the output waveform</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOTH</name>
<description>Blanking applied from each toggle of the output waveform</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RESTART</name>
<description>Fault B Restart</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>HALT</name>
<description>Fault B Halt Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>HALTSelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>Halt action disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HW</name>
<description>Hardware halt action</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>SW</name>
<description>Software halt action</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>NR</name>
<description>Non-recoverable fault</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CHSEL</name>
<description>Fault B Capture Channel</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CHSELSelect</name>
<enumeratedValue>
<name>CC0</name>
<description>Capture value stored in channel 0</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CC1</name>
<description>Capture value stored in channel 1</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CC2</name>
<description>Capture value stored in channel 2</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CC3</name>
<description>Capture value stored in channel 3</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CAPTURE</name>
<description>Fault B Capture Action</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>CAPTURESelect</name>
<enumeratedValue>
<name>DISABLE</name>
<description>No capture</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPT</name>
<description>Capture on fault</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMIN</name>
<description>Minimum capture</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMAX</name>
<description>Maximum capture</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCMIN</name>
<description>Minimum local detection</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>LOCMAX</name>
<description>Maximum local detection</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DERIV0</name>
<description>Minimum and maximum local detection</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CAPTMARK</name>
<description>Capture with ramp index as MSB value</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>BLANKPRESC</name>
<description>Fault B Blanking Prescaler</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BLANKVAL</name>
<description>Fault B Blanking Time</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>FILTERVAL</name>
<description>Fault B Filter Value</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>WEXCTRL</name>
<description>Waveform Extension Configuration</description>
<addressOffset>0x14</addressOffset>
<size>32</size>
<fields>
<field>
<name>OTMX</name>
<description>Output Matrix</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DTIEN0</name>
<description>Dead-time Insertion Generator 0 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIEN1</name>
<description>Dead-time Insertion Generator 1 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIEN2</name>
<description>Dead-time Insertion Generator 2 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTIEN3</name>
<description>Dead-time Insertion Generator 3 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DTLS</name>
<description>Dead-time Low Side Outputs Value</description>
<bitOffset>16</bitOffset>
<bitWidth>8</bitWidth>
</field>
<field>
<name>DTHS</name>
<description>Dead-time High Side Outputs Value</description>
<bitOffset>24</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<name>DRVCTRL</name>
<description>Driver Control</description>
<addressOffset>0x18</addressOffset>
<size>32</size>
<fields>
<field>
<name>NRE0</name>
<description>Non-Recoverable State 0 Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE1</name>
<description>Non-Recoverable State 1 Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE2</name>
<description>Non-Recoverable State 2 Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE3</name>
<description>Non-Recoverable State 3 Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE4</name>
<description>Non-Recoverable State 4 Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE5</name>
<description>Non-Recoverable State 5 Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE6</name>
<description>Non-Recoverable State 6 Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRE7</name>
<description>Non-Recoverable State 7 Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV0</name>
<description>Non-Recoverable State 0 Output Value</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV1</name>
<description>Non-Recoverable State 1 Output Value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV2</name>
<description>Non-Recoverable State 2 Output Value</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV3</name>
<description>Non-Recoverable State 3 Output Value</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV4</name>
<description>Non-Recoverable State 4 Output Value</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV5</name>
<description>Non-Recoverable State 5 Output Value</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV6</name>
<description>Non-Recoverable State 6 Output Value</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>NRV7</name>
<description>Non-Recoverable State 7 Output Value</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN0</name>
<description>Output Waveform 0 Inversion</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN1</name>
<description>Output Waveform 1 Inversion</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN2</name>
<description>Output Waveform 2 Inversion</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN3</name>
<description>Output Waveform 3 Inversion</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN4</name>
<description>Output Waveform 4 Inversion</description>
<bitOffset>20</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN5</name>
<description>Output Waveform 5 Inversion</description>
<bitOffset>21</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN6</name>
<description>Output Waveform 6 Inversion</description>
<bitOffset>22</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>INVEN7</name>
<description>Output Waveform 7 Inversion</description>
<bitOffset>23</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FILTERVAL0</name>
<description>Non-Recoverable Fault Input 0 Filter Value</description>
<bitOffset>24</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FILTERVAL1</name>
<description>Non-Recoverable Fault Input 1 Filter Value</description>
<bitOffset>28</bitOffset>
<bitWidth>4</bitWidth>
</field>
</fields>
</register>
<register>
<name>DBGCTRL</name>
<description>Debug Control</description>
<addressOffset>0x1E</addressOffset>
<size>8</size>
<fields>
<field>
<name>DBGRUN</name>
<description>Debug Running Mode</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FDDBD</name>
<description>Fault Detection on Debug Break Detection</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<fields>
<field>
<name>EVACT0</name>
<description>Timer/counter Input Event0 Action</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACT0Select</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Start, restart or re-trigger counter on event</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNTEV</name>
<description>Count on event</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>START</name>
<description>Start counter on event</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>INC</name>
<description>Increment counter on event</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>COUNT</name>
<description>Count on active state of asynchronous event</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>STAMP</name>
<description>Stamp capture</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>FAULT</name>
<description>Non-recoverable fault</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>EVACT1</name>
<description>Timer/counter Input Event1 Action</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>EVACT1Select</name>
<enumeratedValue>
<name>OFF</name>
<description>Event action disabled</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RETRIGGER</name>
<description>Re-trigger counter on event</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>DIR</name>
<description>Direction control</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>STOP</name>
<description>Stop counter on event</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>DEC</name>
<description>Decrement counter on event</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>PPW</name>
<description>Period capture value in CC0 register, pulse width capture value in CC1 register</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>PWP</name>
<description>Period capture value in CC1 register, pulse width capture value in CC0 register</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>FAULT</name>
<description>Non-recoverable fault</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CNTSEL</name>
<description>Timer/counter Output Event Mode</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>CNTSELSelect</name>
<enumeratedValue>
<name>START</name>
<description>An interrupt/event is generated when a new counter cycle starts</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>END</name>
<description>An interrupt/event is generated when a counter cycle ends</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>BETWEEN</name>
<description>An interrupt/event is generated when a counter cycle ends, except for the first and last cycles</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>BOUNDARY</name>
<description>An interrupt/event is generated when a new counter cycle starts or a counter cycle ends</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>OVFEO</name>
<description>Overflow/Underflow Output Event Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRGEO</name>
<description>Retrigger Output Event Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNTEO</name>
<description>Timer/counter Output Event Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCINV0</name>
<description>Inverted Event 0 Input Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCINV1</name>
<description>Inverted Event 1 Input Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI0</name>
<description>Timer/counter Event 0 Input Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TCEI1</name>
<description>Timer/counter Event 1 Input Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI0</name>
<description>Match or Capture Channel 0 Event Input Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI1</name>
<description>Match or Capture Channel 1 Event Input Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI2</name>
<description>Match or Capture Channel 2 Event Input Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEI3</name>
<description>Match or Capture Channel 3 Event Input Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO0</name>
<description>Match or Capture Channel 0 Event Output Enable</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO1</name>
<description>Match or Capture Channel 1 Event Output Enable</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO2</name>
<description>Match or Capture Channel 2 Event Output Enable</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MCEO3</name>
<description>Match or Capture Channel 3 Event Output Enable</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x24</addressOffset>
<size>32</size>
<fields>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRG</name>
<description>Retrigger Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNT</name>
<description>Counter Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UFS</name>
<description>Non-Recoverable Update Fault Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFS</name>
<description>Non-Recoverable Debug Fault Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTA</name>
<description>Recoverable Fault A Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTB</name>
<description>Recoverable Fault B Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0</name>
<description>Non-Recoverable Fault 0 Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Non-Recoverable Fault 1 Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Match or Capture Channel 0 Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Match or Capture Channel 1 Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC2</name>
<description>Match or Capture Channel 2 Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC3</name>
<description>Match or Capture Channel 3 Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x28</addressOffset>
<size>32</size>
<fields>
<field>
<name>OVF</name>
<description>Overflow Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRG</name>
<description>Retrigger Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNT</name>
<description>Counter Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UFS</name>
<description>Non-Recoverable Update Fault Interrupt Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFS</name>
<description>Non-Recoverable Debug Fault Interrupt Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTA</name>
<description>Recoverable Fault A Interrupt Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTB</name>
<description>Recoverable Fault B Interrupt Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0</name>
<description>Non-Recoverable Fault 0 Interrupt Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Non-Recoverable Fault 1 Interrupt Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Match or Capture Channel 0 Interrupt Enable</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Match or Capture Channel 1 Interrupt Enable</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC2</name>
<description>Match or Capture Channel 2 Interrupt Enable</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC3</name>
<description>Match or Capture Channel 3 Interrupt Enable</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x2C</addressOffset>
<size>32</size>
<fields>
<field>
<name>OVF</name>
<description>Overflow</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRG</name>
<description>Retrigger</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CNT</name>
<description>Counter</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ERR</name>
<description>Error</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UFS</name>
<description>Non-Recoverable Update Fault</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFS</name>
<description>Non-Recoverable Debug Fault</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTA</name>
<description>Recoverable Fault A</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTB</name>
<description>Recoverable Fault B</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0</name>
<description>Non-Recoverable Fault 0</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Non-Recoverable Fault 1</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC0</name>
<description>Match or Capture 0</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC1</name>
<description>Match or Capture 1</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC2</name>
<description>Match or Capture 2</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MC3</name>
<description>Match or Capture 3</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>Status</description>
<addressOffset>0x30</addressOffset>
<size>32</size>
<resetValue>0x00000001</resetValue>
<fields>
<field>
<name>STOP</name>
<description>Stop</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>IDX</name>
<description>Ramp</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>UFS</name>
<description>Non-recoverable Update Fault State</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DFS</name>
<description>Non-Recoverable Debug Fault State</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SLAVE</name>
<description>Slave</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PATTBUFV</name>
<description>Pattern Buffer Valid</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERBUFV</name>
<description>Period Buffer Valid</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTAIN</name>
<description>Recoverable Fault A Input</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FAULTBIN</name>
<description>Recoverable Fault B Input</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FAULT0IN</name>
<description>Non-Recoverable Fault0 Input</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FAULT1IN</name>
<description>Non-Recoverable Fault1 Input</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FAULTA</name>
<description>Recoverable Fault A State</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULTB</name>
<description>Recoverable Fault B State</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT0</name>
<description>Non-Recoverable Fault 0 State</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>FAULT1</name>
<description>Non-Recoverable Fault 1 State</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV0</name>
<description>Compare Channel 0 Buffer Valid</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV1</name>
<description>Compare Channel 1 Buffer Valid</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV2</name>
<description>Compare Channel 2 Buffer Valid</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CCBUFV3</name>
<description>Compare Channel 3 Buffer Valid</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CMP0</name>
<description>Compare Channel 0 Value</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMP1</name>
<description>Compare Channel 1 Value</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMP2</name>
<description>Compare Channel 2 Value</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CMP3</name>
<description>Compare Channel 3 Value</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>COUNT</name>
<description>Count</description>
<addressOffset>0x34</addressOffset>
<size>32</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT_DITH4</name>
<description>Count</description>
<alternateRegister>COUNT</alternateRegister>
<addressOffset>0x34</addressOffset>
<size>32</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT_DITH5</name>
<description>Count</description>
<alternateRegister>COUNT</alternateRegister>
<addressOffset>0x34</addressOffset>
<size>32</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<name>COUNT_DITH6</name>
<description>Count</description>
<alternateRegister>COUNT</alternateRegister>
<addressOffset>0x34</addressOffset>
<size>32</size>
<fields>
<field>
<name>COUNT</name>
<description>Counter Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<name>PATT</name>
<description>Pattern</description>
<addressOffset>0x38</addressOffset>
<size>16</size>
<fields>
<field>
<name>PGE0</name>
<description>Pattern Generator 0 Output Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE1</name>
<description>Pattern Generator 1 Output Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE2</name>
<description>Pattern Generator 2 Output Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE3</name>
<description>Pattern Generator 3 Output Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE4</name>
<description>Pattern Generator 4 Output Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE5</name>
<description>Pattern Generator 5 Output Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE6</name>
<description>Pattern Generator 6 Output Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGE7</name>
<description>Pattern Generator 7 Output Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV0</name>
<description>Pattern Generator 0 Output Value</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV1</name>
<description>Pattern Generator 1 Output Value</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV2</name>
<description>Pattern Generator 2 Output Value</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV3</name>
<description>Pattern Generator 3 Output Value</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV4</name>
<description>Pattern Generator 4 Output Value</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV5</name>
<description>Pattern Generator 5 Output Value</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV6</name>
<description>Pattern Generator 6 Output Value</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGV7</name>
<description>Pattern Generator 7 Output Value</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>WAVE</name>
<description>Waveform Control</description>
<addressOffset>0x3C</addressOffset>
<size>32</size>
<fields>
<field>
<name>WAVEGEN</name>
<description>Waveform Generation</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<enumeratedValues>
<name>WAVEGENSelect</name>
<enumeratedValue>
<name>NFRQ</name>
<description>Normal frequency</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>MFRQ</name>
<description>Match frequency</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>NPWM</name>
<description>Normal PWM</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>DSCRITICAL</name>
<description>Dual-slope critical</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>DSBOTTOM</name>
<description>Dual-slope with interrupt/event condition when COUNT reaches ZERO</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>DSBOTH</name>
<description>Dual-slope with interrupt/event condition when COUNT reaches ZERO or TOP</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>DSTOP</name>
<description>Dual-slope with interrupt/event condition when COUNT reaches TOP</description>
<value>0x7</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>RAMP</name>
<description>Ramp Mode</description>
<bitOffset>4</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>RAMPSelect</name>
<enumeratedValue>
<name>RAMP1</name>
<description>RAMP1 operation</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>RAMP2A</name>
<description>Alternative RAMP2 operation</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>RAMP2</name>
<description>RAMP2 operation</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>RAMP2C</name>
<description>Critical RAMP2 operation</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>CIPEREN</name>
<description>Circular period Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CICCEN0</name>
<description>Circular Channel 0 Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CICCEN1</name>
<description>Circular Channel 1 Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CICCEN2</name>
<description>Circular Channel 2 Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>CICCEN3</name>
<description>Circular Channel 3 Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL0</name>
<description>Channel 0 Polarity</description>
<bitOffset>16</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL1</name>
<description>Channel 1 Polarity</description>
<bitOffset>17</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL2</name>
<description>Channel 2 Polarity</description>
<bitOffset>18</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>POL3</name>
<description>Channel 3 Polarity</description>
<bitOffset>19</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP0</name>
<description>Swap DTI Output Pair 0</description>
<bitOffset>24</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP1</name>
<description>Swap DTI Output Pair 1</description>
<bitOffset>25</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP2</name>
<description>Swap DTI Output Pair 2</description>
<bitOffset>26</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SWAP3</name>
<description>Swap DTI Output Pair 3</description>
<bitOffset>27</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER</name>
<description>Period</description>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER_DITH4</name>
<description>Period</description>
<alternateRegister>PER</alternateRegister>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER_DITH5</name>
<description>Period</description>
<alternateRegister>PER</alternateRegister>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<name>PER_DITH6</name>
<description>Period</description>
<alternateRegister>PER</alternateRegister>
<addressOffset>0x40</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>PER</name>
<description>Period Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>CC%s</name>
<description>Compare and Capture</description>
<addressOffset>0x44</addressOffset>
<size>32</size>
<fields>
<field>
<name>CC</name>
<description>Channel Compare/Capture Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>CC%s_DITH4</name>
<description>Compare and Capture</description>
<alternateRegister>CC%s</alternateRegister>
<addressOffset>0x44</addressOffset>
<size>32</size>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>CC</name>
<description>Channel Compare/Capture Value</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>CC%s_DITH5</name>
<description>Compare and Capture</description>
<alternateRegister>CC%s</alternateRegister>
<addressOffset>0x44</addressOffset>
<size>32</size>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>CC</name>
<description>Channel Compare/Capture Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>CC%s_DITH6</name>
<description>Compare and Capture</description>
<alternateRegister>CC%s</alternateRegister>
<addressOffset>0x44</addressOffset>
<size>32</size>
<fields>
<field>
<name>DITHER</name>
<description>Dithering Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>CC</name>
<description>Channel Compare/Capture Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<name>PATTBUF</name>
<description>Pattern Buffer</description>
<addressOffset>0x64</addressOffset>
<size>16</size>
<fields>
<field>
<name>PGEB0</name>
<description>Pattern Generator 0 Output Enable Buffer</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB1</name>
<description>Pattern Generator 1 Output Enable Buffer</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB2</name>
<description>Pattern Generator 2 Output Enable Buffer</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB3</name>
<description>Pattern Generator 3 Output Enable Buffer</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB4</name>
<description>Pattern Generator 4 Output Enable Buffer</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB5</name>
<description>Pattern Generator 5 Output Enable Buffer</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB6</name>
<description>Pattern Generator 6 Output Enable Buffer</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGEB7</name>
<description>Pattern Generator 7 Output Enable Buffer</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB0</name>
<description>Pattern Generator 0 Output Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB1</name>
<description>Pattern Generator 1 Output Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB2</name>
<description>Pattern Generator 2 Output Enable</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB3</name>
<description>Pattern Generator 3 Output Enable</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB4</name>
<description>Pattern Generator 4 Output Enable</description>
<bitOffset>12</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB5</name>
<description>Pattern Generator 5 Output Enable</description>
<bitOffset>13</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB6</name>
<description>Pattern Generator 6 Output Enable</description>
<bitOffset>14</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PGVB7</name>
<description>Pattern Generator 7 Output Enable</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF</name>
<description>Period Buffer</description>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF_DITH4</name>
<description>Period Buffer</description>
<alternateRegister>PERBUF</alternateRegister>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF_DITH5</name>
<description>Period Buffer</description>
<alternateRegister>PERBUF</alternateRegister>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<name>PERBUF_DITH6</name>
<description>Period Buffer</description>
<alternateRegister>PERBUF</alternateRegister>
<addressOffset>0x6C</addressOffset>
<size>32</size>
<resetValue>0xFFFFFFFF</resetValue>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>PERBUF</name>
<description>Period Buffer Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>CCBUF%s</name>
<description>Compare and Capture Buffer</description>
<addressOffset>0x70</addressOffset>
<size>32</size>
<fields>
<field>
<name>CCBUF</name>
<description>Channel Compare/Capture Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>24</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>CCBUF%s_DITH4</name>
<description>Compare and Capture Buffer</description>
<alternateRegister>CCBUF%s</alternateRegister>
<addressOffset>0x70</addressOffset>
<size>32</size>
<fields>
<field>
<name>CCBUF</name>
<description>Channel Compare/Capture Buffer Value</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>4</bitOffset>
<bitWidth>20</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>CCBUF%s_DITH5</name>
<description>Compare and Capture Buffer</description>
<alternateRegister>CCBUF%s</alternateRegister>
<addressOffset>0x70</addressOffset>
<size>32</size>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>CCBUF</name>
<description>Channel Compare/Capture Buffer Value</description>
<bitOffset>5</bitOffset>
<bitWidth>19</bitWidth>
</field>
</fields>
</register>
<register>
<dim>4</dim>
<dimIncrement>0x4</dimIncrement>
<name>CCBUF%s_DITH6</name>
<description>Compare and Capture Buffer</description>
<alternateRegister>CCBUF%s</alternateRegister>
<addressOffset>0x70</addressOffset>
<size>32</size>
<fields>
<field>
<name>DITHERBUF</name>
<description>Dithering Buffer Cycle Number</description>
<bitOffset>0</bitOffset>
<bitWidth>6</bitWidth>
</field>
<field>
<name>CCBUF</name>
<description>Channel Compare/Capture Buffer Value</description>
<bitOffset>6</bitOffset>
<bitWidth>18</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral derivedFrom="TCC0">
<name>TCC1</name>
<description>Timer Counter Control 1</description>
<baseAddress>0x42001800</baseAddress>
<interrupt>
<name>TCC1</name>
<value>15</value>
</interrupt>
</peripheral>
<peripheral derivedFrom="TCC0">
<name>TCC2</name>
<description>Timer Counter Control 2</description>
<baseAddress>0x42001C00</baseAddress>
<interrupt>
<name>TCC2</name>
<value>16</value>
</interrupt>
</peripheral>
<peripheral>
<name>TRNG</name>
<version>1.0.0</version>
<description>True Random Generator</description>
<groupName>TRNG</groupName>
<prependToName>TRNG_</prependToName>
<baseAddress>0x42003800</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x40</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>TRNG</name>
<value>27</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x00</addressOffset>
<size>8</size>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EVCTRL</name>
<description>Event Control</description>
<addressOffset>0x04</addressOffset>
<size>8</size>
<fields>
<field>
<name>DATARDYEO</name>
<description>Data Ready Event Output</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x08</addressOffset>
<size>8</size>
<fields>
<field>
<name>DATARDY</name>
<description>Data Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x09</addressOffset>
<size>8</size>
<fields>
<field>
<name>DATARDY</name>
<description>Data Ready Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x0A</addressOffset>
<size>8</size>
<fields>
<field>
<name>DATARDY</name>
<description>Data Ready Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>DATA</name>
<description>Output Data</description>
<addressOffset>0x20</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>DATA</name>
<description>Output Data</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
</registers>
</peripheral>
<peripheral>
<name>USB</name>
<version>1.1.1</version>
<description>Universal Serial Bus</description>
<groupName>USB</groupName>
<prependToName>USB_</prependToName>
<baseAddress>0x41000000</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x400</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>USB</name>
<value>6</value>
</interrupt>
<registers>
<cluster>
<name>DEVICE</name>
<description>USB is Device</description>
<headerStructName>UsbDevice</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x000</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>DEVICE</name>
<description>Device Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HOST</name>
<description>Host Mode</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x002</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>QOSCTRL</name>
<description>USB Quality Of Service</description>
<addressOffset>0x003</addressOffset>
<size>8</size>
<resetValue>0x0F</resetValue>
<fields>
<field>
<name>CQOS</name>
<description>Configuration Quality of Service</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DQOS</name>
<description>Data Quality of Service</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>DEVICE Control B</description>
<addressOffset>0x008</addressOffset>
<size>16</size>
<resetValue>0x0001</resetValue>
<fields>
<field>
<name>DETACH</name>
<description>Detach</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDCONF</name>
<description>Speed Configuration</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPDCONFSelect</name>
<enumeratedValue>
<name>FS</name>
<description>FS : Full Speed</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>LS</name>
<description>LS : Low Speed</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>HS</name>
<description>HS : High Speed capable</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>HSTM</name>
<description>HSTM: High Speed Test Mode (force high-speed mode for test mode)</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>NREPLY</name>
<description>No Reply</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTJ</name>
<description>Test mode J</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTK</name>
<description>Test mode K</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTPCKT</name>
<description>Test packet mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>OPMODE2</name>
<description>Specific Operational Mode</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>GNAK</name>
<description>Global NAK</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMHDSK</name>
<description>Link Power Management Handshake</description>
<bitOffset>10</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>LPMHDSKSelect</name>
<enumeratedValue>
<name>NO</name>
<description>No handshake. LPM is not supported</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>ACK</name>
<description>ACK</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>NYET</name>
<description>NYET</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>STALL</name>
<description>STALL</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>DADD</name>
<description>DEVICE Device Address</description>
<addressOffset>0x00A</addressOffset>
<size>8</size>
<fields>
<field>
<name>DADD</name>
<description>Device Address</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
</field>
<field>
<name>ADDEN</name>
<description>Device Address Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>DEVICE Status</description>
<addressOffset>0x00C</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x40</resetValue>
<fields>
<field>
<name>SPEED</name>
<description>Speed Status</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>SPEEDSelect</name>
<enumeratedValue>
<name>FS</name>
<description>Full-speed mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HS</name>
<description>High-speed mode</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>LS</name>
<description>Low-speed mode</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>LINESTATE</name>
<description>USB Line State Status</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>LINESTATESelect</name>
<enumeratedValue>
<name>0</name>
<description>SE0/RESET</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>1</name>
<description>FS-J or LS-K State</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>2</name>
<description>FS-K or LS-J State</description>
<value>0x2</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FSMSTATUS</name>
<description>Finite State Machine Status</description>
<addressOffset>0x00D</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>FSMSTATE</name>
<description>Fine State Machine Status</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>FSMSTATESelect</name>
<enumeratedValue>
<name>OFF</name>
<description>OFF (L3). It corresponds to the powered-off, disconnected, and disabled state</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>ON (L0). It corresponds to the Idle and Active states</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>SUSPEND (L2)</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>SLEEP</name>
<description>SLEEP (L1)</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DNRESUME</name>
<description>DNRESUME. Down Stream Resume.</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>UPRESUME</name>
<description>UPRESUME. Up Stream Resume.</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>RESET. USB lines Reset.</description>
<value>0x40</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FNUM</name>
<description>DEVICE Device Frame Number</description>
<addressOffset>0x010</addressOffset>
<size>16</size>
<access>read-only</access>
<fields>
<field>
<name>MFNUM</name>
<description>Micro Frame Number</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FNUM</name>
<description>Frame Number</description>
<bitOffset>3</bitOffset>
<bitWidth>11</bitWidth>
<access>read-only</access>
</field>
<field>
<name>FNCERR</name>
<description>Frame Number CRC Error</description>
<bitOffset>15</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>DEVICE Device Interrupt Enable Clear</description>
<addressOffset>0x014</addressOffset>
<size>16</size>
<fields>
<field>
<name>SUSPEND</name>
<description>Suspend Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSOF</name>
<description>Micro Start of Frame Interrupt Enable in High Speed Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOF</name>
<description>Start Of Frame Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORST</name>
<description>End of Reset Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORSM</name>
<description>End Of Resume Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMNYET</name>
<description>Link Power Management Not Yet Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMSUSP</name>
<description>Link Power Management Suspend Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>DEVICE Device Interrupt Enable Set</description>
<addressOffset>0x018</addressOffset>
<size>16</size>
<fields>
<field>
<name>SUSPEND</name>
<description>Suspend Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSOF</name>
<description>Micro Start of Frame Interrupt Enable in High Speed Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOF</name>
<description>Start Of Frame Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORST</name>
<description>End of Reset Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORSM</name>
<description>End Of Resume Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMNYET</name>
<description>Link Power Management Not Yet Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMSUSP</name>
<description>Link Power Management Suspend Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>DEVICE Device Interrupt Flag</description>
<addressOffset>0x01C</addressOffset>
<size>16</size>
<fields>
<field>
<name>SUSPEND</name>
<description>Suspend</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MSOF</name>
<description>Micro Start of Frame in High Speed Mode</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOF</name>
<description>Start Of Frame</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORST</name>
<description>End of Reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>EORSM</name>
<description>End Of Resume</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMNYET</name>
<description>Link Power Management Not Yet</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>LPMSUSP</name>
<description>Link Power Management Suspend</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>EPINTSMRY</name>
<description>DEVICE End Point Interrupt Summary</description>
<addressOffset>0x020</addressOffset>
<size>16</size>
<access>read-only</access>
<fields>
<field>
<name>EPINT0</name>
<description>End Point 0 Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT1</name>
<description>End Point 1 Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT2</name>
<description>End Point 2 Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT3</name>
<description>End Point 3 Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT4</name>
<description>End Point 4 Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT5</name>
<description>End Point 5 Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT6</name>
<description>End Point 6 Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT7</name>
<description>End Point 7 Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DESCADD</name>
<description>Descriptor Address</description>
<addressOffset>0x024</addressOffset>
<size>32</size>
<fields>
<field>
<name>DESCADD</name>
<description>Descriptor Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>PADCAL</name>
<description>USB PAD Calibration</description>
<addressOffset>0x028</addressOffset>
<size>16</size>
<fields>
<field>
<name>TRANSP</name>
<description>USB Pad Transp calibration</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRANSN</name>
<description>USB Pad Transn calibration</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRIM</name>
<description>USB Pad Trim calibration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>EPCFG%s</name>
<description>DEVICE End Point Configuration</description>
<addressOffset>0x100</addressOffset>
<size>8</size>
<fields>
<field>
<name>EPTYPE0</name>
<description>End Point Type0</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>EPTYPE1</name>
<description>End Point Type1</description>
<bitOffset>4</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>NYETDIS</name>
<description>NYET Token Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>EPSTATUSCLR%s</name>
<description>DEVICE End Point Pipe Status Clear</description>
<addressOffset>0x104</addressOffset>
<size>8</size>
<access>write-only</access>
<fields>
<field>
<name>DTGLOUT</name>
<description>Data Toggle OUT Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTGLIN</name>
<description>Data Toggle IN Clear</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank Clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALLRQ0</name>
<description>Stall 0 Request Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALLRQ1</name>
<description>Stall 1 Request Clear</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 Ready Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 Ready Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>EPSTATUSSET%s</name>
<description>DEVICE End Point Pipe Status Set</description>
<addressOffset>0x105</addressOffset>
<size>8</size>
<access>write-only</access>
<fields>
<field>
<name>DTGLOUT</name>
<description>Data Toggle OUT Set</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>DTGLIN</name>
<description>Data Toggle IN Set</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank Set</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALLRQ0</name>
<description>Stall 0 Request Set</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>STALLRQ1</name>
<description>Stall 1 Request Set</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 Ready Set</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 Ready Set</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>EPSTATUS%s</name>
<description>DEVICE End Point Pipe Status</description>
<addressOffset>0x106</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>DTGLOUT</name>
<description>Data Toggle Out</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>DTGLIN</name>
<description>Data Toggle In</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALLRQ0</name>
<description>Stall 0 Request</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>STALLRQ1</name>
<description>Stall 1 Request</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 ready</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 ready</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>EPINTFLAG%s</name>
<description>DEVICE End Point Interrupt Flag</description>
<addressOffset>0x107</addressOffset>
<size>8</size>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL0</name>
<description>Error Flow 0</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL1</name>
<description>Error Flow 1</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTP</name>
<description>Received Setup</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL0</name>
<description>Stall 0 In/out</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL1</name>
<description>Stall 1 In/out</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>EPINTENCLR%s</name>
<description>DEVICE End Point Interrupt Clear Flag</description>
<addressOffset>0x108</addressOffset>
<size>8</size>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Interrupt Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Interrupt Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL0</name>
<description>Error Flow 0 Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL1</name>
<description>Error Flow 1 Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTP</name>
<description>Received Setup Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL0</name>
<description>Stall 0 In/Out Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL1</name>
<description>Stall 1 In/Out Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>EPINTENSET%s</name>
<description>DEVICE End Point Interrupt Set Flag</description>
<addressOffset>0x109</addressOffset>
<size>8</size>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL0</name>
<description>Error Flow 0 Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL1</name>
<description>Error Flow 1 Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RXSTP</name>
<description>Received Setup Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL0</name>
<description>Stall 0 In/out Interrupt enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL1</name>
<description>Stall 1 In/out Interrupt enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- UsbDevice -->
<cluster>
<name>HOST</name>
<description>USB is Host</description>
<alternateCluster>DEVICE</alternateCluster>
<headerStructName>UsbHost</headerStructName>
<addressOffset>0x0</addressOffset>
<register>
<name>CTRLA</name>
<description>Control A</description>
<addressOffset>0x000</addressOffset>
<size>8</size>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RUNSTDBY</name>
<description>Run in Standby Mode</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>MODE</name>
<description>Operating Mode</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<enumeratedValues>
<name>MODESelect</name>
<enumeratedValue>
<name>DEVICE</name>
<description>Device Mode</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>HOST</name>
<description>Host Mode</description>
<value>0x1</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x002</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>SWRST</name>
<description>Software Reset Synchronization Busy</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ENABLE</name>
<description>Enable Synchronization Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>QOSCTRL</name>
<description>USB Quality Of Service</description>
<addressOffset>0x003</addressOffset>
<size>8</size>
<resetValue>0x0F</resetValue>
<fields>
<field>
<name>CQOS</name>
<description>Configuration Quality of Service</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>DQOS</name>
<description>Data Quality of Service</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
</fields>
</register>
<register>
<name>CTRLB</name>
<description>HOST Control B</description>
<addressOffset>0x008</addressOffset>
<size>16</size>
<fields>
<field>
<name>RESUME</name>
<description>Send USB Resume</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SPDCONF</name>
<description>Speed Configuration for Host</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
<enumeratedValues>
<name>SPDCONFSelect</name>
<enumeratedValue>
<name>NORMAL</name>
<description>Normal mode: the host starts in full-speed mode and performs a high-speed reset to switch to the high speed mode if the downstream peripheral is high-speed capable.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>FS</name>
<description>Full-speed: the host remains in full-speed mode whatever is the peripheral speed capability. Relevant in UTMI mode only.</description>
<value>0x3</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>AUTORESUME</name>
<description>Auto Resume Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTJ</name>
<description>Test mode J</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TSTK</name>
<description>Test mode K</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>SOFE</name>
<description>Start of Frame Generation Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>BUSRESET</name>
<description>Send USB Reset</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>VBUSOK</name>
<description>VBUS is OK</description>
<bitOffset>10</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>L1RESUME</name>
<description>Send L1 Resume</description>
<bitOffset>11</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>HSOFC</name>
<description>HOST Host Start Of Frame Control</description>
<addressOffset>0x00A</addressOffset>
<size>8</size>
<fields>
<field>
<name>FLENC</name>
<description>Frame Length Control</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
</field>
<field>
<name>FLENCE</name>
<description>Frame Length Control Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>STATUS</name>
<description>HOST Status</description>
<addressOffset>0x00C</addressOffset>
<size>8</size>
<fields>
<field>
<name>SPEED</name>
<description>Speed Status</description>
<bitOffset>2</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>LINESTATE</name>
<description>USB Line State Status</description>
<bitOffset>6</bitOffset>
<bitWidth>2</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>FSMSTATUS</name>
<description>Finite State Machine Status</description>
<addressOffset>0x00D</addressOffset>
<size>8</size>
<access>read-only</access>
<resetValue>0x01</resetValue>
<fields>
<field>
<name>FSMSTATE</name>
<description>Fine State Machine Status</description>
<bitOffset>0</bitOffset>
<bitWidth>7</bitWidth>
<access>read-only</access>
<enumeratedValues>
<name>FSMSTATESelect</name>
<enumeratedValue>
<name>OFF</name>
<description>OFF (L3). It corresponds to the powered-off, disconnected, and disabled state</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>ON</name>
<description>ON (L0). It corresponds to the Idle and Active states</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>SUSPEND</name>
<description>SUSPEND (L2)</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>SLEEP</name>
<description>SLEEP (L1)</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>DNRESUME</name>
<description>DNRESUME. Down Stream Resume.</description>
<value>0x10</value>
</enumeratedValue>
<enumeratedValue>
<name>UPRESUME</name>
<description>UPRESUME. Up Stream Resume.</description>
<value>0x20</value>
</enumeratedValue>
<enumeratedValue>
<name>RESET</name>
<description>RESET. USB lines Reset.</description>
<value>0x40</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>FNUM</name>
<description>HOST Host Frame Number</description>
<addressOffset>0x010</addressOffset>
<size>16</size>
<fields>
<field>
<name>MFNUM</name>
<description>Micro Frame Number</description>
<bitOffset>0</bitOffset>
<bitWidth>3</bitWidth>
</field>
<field>
<name>FNUM</name>
<description>Frame Number</description>
<bitOffset>3</bitOffset>
<bitWidth>11</bitWidth>
</field>
</fields>
</register>
<register>
<name>FLENHIGH</name>
<description>HOST Host Frame Length</description>
<addressOffset>0x012</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>FLENHIGH</name>
<description>Frame Length</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>HOST Host Interrupt Enable Clear</description>
<addressOffset>0x014</addressOffset>
<size>16</size>
<fields>
<field>
<name>HSOF</name>
<description>Host Start Of Frame Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>BUS Reset Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DNRSM</name>
<description>DownStream to Device Interrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume from Device Interrupt Disable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access Interrupt Disable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCONN</name>
<description>Device Connection Interrupt Disable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDISC</name>
<description>Device Disconnection Interrupt Disable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>HOST Host Interrupt Enable Set</description>
<addressOffset>0x018</addressOffset>
<size>16</size>
<fields>
<field>
<name>HSOF</name>
<description>Host Start Of Frame Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Bus Reset Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DNRSM</name>
<description>DownStream to the Device Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume fromthe device Interrupt Enable</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access Interrupt Enable</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCONN</name>
<description>Link Power Management Interrupt Enable</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDISC</name>
<description>Device Disconnection Interrupt Enable</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>HOST Host Interrupt Flag</description>
<addressOffset>0x01C</addressOffset>
<size>16</size>
<fields>
<field>
<name>HSOF</name>
<description>Host Start Of Frame</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RST</name>
<description>Bus Reset</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WAKEUP</name>
<description>Wake Up</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DNRSM</name>
<description>Downstream</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>UPRSM</name>
<description>Upstream Resume from the Device</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>RAMACER</name>
<description>Ram Access</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DCONN</name>
<description>Device Connection</description>
<bitOffset>8</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>DDISC</name>
<description>Device Disconnection</description>
<bitOffset>9</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>PINTSMRY</name>
<description>HOST Pipe Interrupt Summary</description>
<addressOffset>0x020</addressOffset>
<size>16</size>
<access>read-only</access>
<fields>
<field>
<name>EPINT0</name>
<description>Pipe 0 Interrupt</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT1</name>
<description>Pipe 1 Interrupt</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT2</name>
<description>Pipe 2 Interrupt</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT3</name>
<description>Pipe 3 Interrupt</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT4</name>
<description>Pipe 4 Interrupt</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT5</name>
<description>Pipe 5 Interrupt</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT6</name>
<description>Pipe 6 Interrupt</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>EPINT7</name>
<description>Pipe 7 Interrupt</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>DESCADD</name>
<description>Descriptor Address</description>
<addressOffset>0x024</addressOffset>
<size>32</size>
<fields>
<field>
<name>DESCADD</name>
<description>Descriptor Address Value</description>
<bitOffset>0</bitOffset>
<bitWidth>32</bitWidth>
</field>
</fields>
</register>
<register>
<name>PADCAL</name>
<description>USB PAD Calibration</description>
<addressOffset>0x028</addressOffset>
<size>16</size>
<fields>
<field>
<name>TRANSP</name>
<description>USB Pad Transp calibration</description>
<bitOffset>0</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRANSN</name>
<description>USB Pad Transn calibration</description>
<bitOffset>6</bitOffset>
<bitWidth>5</bitWidth>
</field>
<field>
<name>TRIM</name>
<description>USB Pad Trim calibration</description>
<bitOffset>12</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>PCFG%s</name>
<description>HOST End Point Configuration</description>
<addressOffset>0x100</addressOffset>
<size>8</size>
<fields>
<field>
<name>PTOKEN</name>
<description>Pipe Token</description>
<bitOffset>0</bitOffset>
<bitWidth>2</bitWidth>
</field>
<field>
<name>BK</name>
<description>Pipe Bank</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PTYPE</name>
<description>Pipe Type</description>
<bitOffset>3</bitOffset>
<bitWidth>3</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>BINTERVAL%s</name>
<description>HOST Bus Access Period of Pipe</description>
<addressOffset>0x103</addressOffset>
<size>8</size>
<fields>
<field>
<name>BITINTERVAL</name>
<description>Bit Interval</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>PSTATUSCLR%s</name>
<description>HOST End Point Pipe Status Clear</description>
<addressOffset>0x104</addressOffset>
<size>8</size>
<access>write-only</access>
<fields>
<field>
<name>DTGL</name>
<description>Data Toggle clear</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Curren Bank clear</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PFREEZE</name>
<description>Pipe Freeze Clear</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 Ready Clear</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 Ready Clear</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>PSTATUSSET%s</name>
<description>HOST End Point Pipe Status Set</description>
<addressOffset>0x105</addressOffset>
<size>8</size>
<access>write-only</access>
<fields>
<field>
<name>DTGL</name>
<description>Data Toggle Set</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank Set</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>PFREEZE</name>
<description>Pipe Freeze Set</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 Ready Set</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 Ready Set</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>write-only</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>PSTATUS%s</name>
<description>HOST End Point Pipe Status</description>
<addressOffset>0x106</addressOffset>
<size>8</size>
<access>read-only</access>
<fields>
<field>
<name>DTGL</name>
<description>Data Toggle</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CURBK</name>
<description>Current Bank</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>PFREEZE</name>
<description>Pipe Freeze</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BK0RDY</name>
<description>Bank 0 ready</description>
<bitOffset>6</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>BK1RDY</name>
<description>Bank 1 ready</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>PINTFLAG%s</name>
<description>HOST Pipe Interrupt Flag</description>
<addressOffset>0x107</addressOffset>
<size>8</size>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Interrupt Flag</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Interrupt Flag</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL</name>
<description>Error Flow Interrupt Flag</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Pipe Error Interrupt Flag</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTP</name>
<description>Transmit Setup Interrupt Flag</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>Stall Interrupt Flag</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>PINTENCLR%s</name>
<description>HOST Pipe Interrupt Flag Clear</description>
<addressOffset>0x108</addressOffset>
<size>8</size>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Disable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Disable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL</name>
<description>Error Flow Interrupt Disable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Pipe Error Interrupt Disable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTP</name>
<description>Transmit Setup Interrupt Disable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>Stall Inetrrupt Disable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<dim>8</dim>
<dimIncrement>0x20</dimIncrement>
<name>PINTENSET%s</name>
<description>HOST Pipe Interrupt Flag Set</description>
<addressOffset>0x109</addressOffset>
<size>8</size>
<fields>
<field>
<name>TRCPT0</name>
<description>Transfer Complete 0 Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRCPT1</name>
<description>Transfer Complete 1 Interrupt Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TRFAIL</name>
<description>Error Flow Interrupt Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>PERR</name>
<description>Pipe Error Interrupt Enable</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>TXSTP</name>
<description>Transmit Setup Interrupt Enable</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>STALL</name>
<description>Stall Interrupt Enable</description>
<bitOffset>5</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
</cluster> <!-- UsbHost -->
</registers>
</peripheral>
<peripheral>
<name>WDT</name>
<version>1.0.1</version>
<description>Watchdog Timer</description>
<groupName>WDT</groupName>
<prependToName>WDT_</prependToName>
<baseAddress>0x40001C00</baseAddress>
<addressBlock>
<offset>0</offset>
<size>0x10</size>
<usage>registers</usage>
</addressBlock>
<interrupt>
<name>WDT</name>
<value>1</value>
</interrupt>
<registers>
<register>
<name>CTRLA</name>
<description>Control</description>
<addressOffset>0x0</addressOffset>
<size>8</size>
<fields>
<field>
<name>ENABLE</name>
<description>Enable</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>WEN</name>
<description>Watchdog Timer Window Mode Enable</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
</field>
<field>
<name>ALWAYSON</name>
<description>Always-On</description>
<bitOffset>7</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>CONFIG</name>
<description>Configuration</description>
<addressOffset>0x1</addressOffset>
<size>8</size>
<resetValue>0xBB</resetValue>
<fields>
<field>
<name>PER</name>
<description>Time-Out Period</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>PERSelect</name>
<enumeratedValue>
<name>CYC8</name>
<description>8 clock cycles</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16</name>
<description>16 clock cycles</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC32</name>
<description>32 clock cycles</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC64</name>
<description>64 clock cycles</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC128</name>
<description>128 clock cycles</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC256</name>
<description>256 clock cycles</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC512</name>
<description>512 clock cycles</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC1024</name>
<description>1024 clock cycles</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC2048</name>
<description>2048 clock cycles</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC4096</name>
<description>4096 clock cycles</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC8192</name>
<description>8192 clock cycles</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16384</name>
<description>16384 clock cycles</description>
<value>0xb</value>
</enumeratedValue>
</enumeratedValues>
</field>
<field>
<name>WINDOW</name>
<description>Window Mode Time-Out Period</description>
<bitOffset>4</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>WINDOWSelect</name>
<enumeratedValue>
<name>CYC8</name>
<description>8 clock cycles</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16</name>
<description>16 clock cycles</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC32</name>
<description>32 clock cycles</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC64</name>
<description>64 clock cycles</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC128</name>
<description>128 clock cycles</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC256</name>
<description>256 clock cycles</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC512</name>
<description>512 clock cycles</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC1024</name>
<description>1024 clock cycles</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC2048</name>
<description>2048 clock cycles</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC4096</name>
<description>4096 clock cycles</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC8192</name>
<description>8192 clock cycles</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16384</name>
<description>16384 clock cycles</description>
<value>0xb</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>EWCTRL</name>
<description>Early Warning Interrupt Control</description>
<addressOffset>0x2</addressOffset>
<size>8</size>
<resetValue>0x0B</resetValue>
<fields>
<field>
<name>EWOFFSET</name>
<description>Early Warning Interrupt Time Offset</description>
<bitOffset>0</bitOffset>
<bitWidth>4</bitWidth>
<enumeratedValues>
<name>EWOFFSETSelect</name>
<enumeratedValue>
<name>CYC8</name>
<description>8 clock cycles</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16</name>
<description>16 clock cycles</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC32</name>
<description>32 clock cycles</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC64</name>
<description>64 clock cycles</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC128</name>
<description>128 clock cycles</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC256</name>
<description>256 clock cycles</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC512</name>
<description>512 clock cycles</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC1024</name>
<description>1024 clock cycles</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC2048</name>
<description>2048 clock cycles</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC4096</name>
<description>4096 clock cycles</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC8192</name>
<description>8192 clock cycles</description>
<value>0xa</value>
</enumeratedValue>
<enumeratedValue>
<name>CYC16384</name>
<description>16384 clock cycles</description>
<value>0xb</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
<register>
<name>INTENCLR</name>
<description>Interrupt Enable Clear</description>
<addressOffset>0x4</addressOffset>
<size>8</size>
<fields>
<field>
<name>EW</name>
<description>Early Warning Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTENSET</name>
<description>Interrupt Enable Set</description>
<addressOffset>0x5</addressOffset>
<size>8</size>
<fields>
<field>
<name>EW</name>
<description>Early Warning Interrupt Enable</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>INTFLAG</name>
<description>Interrupt Flag Status and Clear</description>
<addressOffset>0x6</addressOffset>
<size>8</size>
<fields>
<field>
<name>EW</name>
<description>Early Warning</description>
<bitOffset>0</bitOffset>
<bitWidth>1</bitWidth>
</field>
</fields>
</register>
<register>
<name>SYNCBUSY</name>
<description>Synchronization Busy</description>
<addressOffset>0x8</addressOffset>
<size>32</size>
<access>read-only</access>
<fields>
<field>
<name>ENABLE</name>
<description>Enable Busy</description>
<bitOffset>1</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>WEN</name>
<description>Window Enable Busy</description>
<bitOffset>2</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>ALWAYSON</name>
<description>Always-On Busy</description>
<bitOffset>3</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
<field>
<name>CLEAR</name>
<description>Clear Busy</description>
<bitOffset>4</bitOffset>
<bitWidth>1</bitWidth>
<access>read-only</access>
</field>
</fields>
</register>
<register>
<name>CLEAR</name>
<description>Clear</description>
<addressOffset>0xC</addressOffset>
<size>8</size>
<access>write-only</access>
<fields>
<field>
<name>CLEAR</name>
<description>Watchdog Clear</description>
<bitOffset>0</bitOffset>
<bitWidth>8</bitWidth>
<access>write-only</access>
<enumeratedValues>
<name>CLEARSelect</name>
<enumeratedValue>
<name>KEY</name>
<description>Clear Key</description>
<value>0xa5</value>
</enumeratedValue>
</enumeratedValues>
</field>
</fields>
</register>
</registers>
</peripheral>
</peripherals>
</device>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment