Skip to content

Instantly share code, notes, and snippets.

@ssinyagin

ssinyagin/CVJI-E212_linaro_boot

Created August 1, 2012 16:06
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save ssinyagin/3228256 to your computer and use it in GitHub Desktop.
Save ssinyagin/3228256 to your computer and use it in GitHub Desktop.
Download ZIP
Linaro boot on CVJI-E212
Raw
CVJI-E212_linaro_boot
U-Boot SPL 2011.09-00000-g8d13bc8-dirty (Jul 26 2012 - 04:00:50)
MMC: SUNXI SD/MMC: 0
Loading U-Boot... OK!
Jumping to U-Boot...
U-Boot 2011.09-00000-g8d13bc8-dirty (Jul 26 2012 - 04:00:50) Allwinner Technology
CPU: SUNXI Family
Board: A10-EVB
DRAM: 512 MiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
Loading file "boot.scr" from mmc device 0:1 (xxa1)
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
Loading file "boot/boot.scr" from mmc device 0:1 (xxa1)
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
reading script.bin
42048 bytes read
reading uImage
3969832 bytes read
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.0.38+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3969768 Bytes = 3.8 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
<6>Initializing cgroup subsys cpuset
<5>Linux version 3.0.38+ (buildbot@rhombustech) (gcc version 4.7.1 20120531 (prerelease) (crosstool-NG linaro-1.13.1-2012.06-20120625 - Linaro GCC 2012.06) ) #1 PREEMPT Thu Jul 26 04:16:34 EST 2012
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun4i
<6>Total Detected Memory: 512MB with 1 banks
<6>64 MB reserved for MALI
<6>Memory Reserved:
<6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
<6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
<6> G2D : 0x58000000 - 0x58ffffff ( 16 MB)
<6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 114688
<7>free_area_init_node: node 0, pgdat c077a8c4, node_mem_map c0835000
<7> Normal zone: 896 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 113792 pages, LIFO batch:31
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
<5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 loglevel=8 panic=10 rootwait
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 448MB = 448MB total
<5>Memory: 315184k/315184k available, 143568k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0031000 ( 164 kB)
.text : 0xc0031000 - 0xc073b000 (7208 kB)
.data : 0xc073c000 - 0xc0782848 ( 283 kB)
.bss : 0xc078286c - 0xc0834510 ( 712 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>NR_IRQS:96 nr_irqs:96 96
<6>timer0: Periodic Mode
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>CPU: Testing write buffer coherency: ok
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>devtmpfs: initialized
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>hw-breakpoint: debug architecture 0x4 unsupported.
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>Initialize DMAC OK
<6>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
Init eGon pin module V2.0
<6>Switching to clocksource aw 64bits couter
<6>cfg80211: Calling CRDA to update world regulatory domain
<5>FS-Cache: Loaded
<6>CacheFiles: Loaded
<6>Switched to NOHz mode on CPU #0
[usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
[sw_hcd0]: usb host driver initialize........
[sw_hcd0]: open_usb_clock
[sw_hcd0]: host_init_state = 0
[sw_hcd0]: platform is usb host
WRN:L1440(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: request_irq 38 failed!
sw_hcd_dma_remove
WRN:L1493(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: sw_hcd_init_controller failed with status -19
WRN:L1699(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: sw_hcd_init_controller failed
[sw_udc]: udc_init: version 20080411
axp driver uning configuration failed(561)
axp driver uning configuration failed(573)
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
[pm]aw_pm_init!
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(0.309:1): initialized
<5>VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>NTFS driver 2.1.30 [Flags: R/W].
<6>fuse init (API version 7.16)
<6>msgmni has been set to 615
<6>alg: No test for stdrng (krng)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<6>serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.0.38+ (buildbot@rhombustech) (gcc version 4.7.1 20120531 (prerelease) (crosstool-NG linaro-1.13.1-2012.06-20120625 - Linaro GCC 2012.06) ) #1 PREEMPT Thu Jul 26 04:16:34 EST 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Total Detected Memory: 512MB with 1 banks
[ 0.000000] 64 MB reserved for MALI
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
[ 0.000000] G2D : 0x58000000 - 0x58ffffff ( 16 MB)
[ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c077a8c4, node_mem_map c0835000
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 113792 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 loglevel=8 panic=10 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 448MB = 448MB total
[ 0.000000] Memory: 315184k/315184k available, 143568k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0031000 ( 164 kB)
[ 0.000000] .text : 0xc0031000 - 0xc073b000 (7208 kB)
[ 0.000000] .data : 0xc073c000 - 0xc0782848 ( 283 kB)
[ 0.000000] .bss : 0xc078286c - 0xc0834510 ( 712 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:96 nr_irqs:96 96
[ 0.000000] timer0: Periodic Mode
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[ 0.040000] pid_max: default: 32768 minimum: 301
[ 0.040000] Mount-cache hash table entries: 512
[ 0.050000] Initializing cgroup subsys cpuacct
[ 0.050000] Initializing cgroup subsys devices
[ 0.050000] Initializing cgroup subsys freezer
[ 0.060000] Initializing cgroup subsys blkio
[ 0.060000] CPU: Testing write buffer coherency: ok
[ 0.060000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.070000] devtmpfs: initialized
[ 0.070000] print_constraints: dummy:
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.090000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.090000] Initialize DMAC OK
[ 0.100000] bio: create slab <bio-0> at 0
[ 0.100000] SCSI subsystem initialized
[ 0.100000] libata version 3.00 loaded.
[ 0.110000] usbcore: registered new interface driver usbfs
[ 0.110000] usbcore: registered new interface driver hub
[ 0.120000] usbcore: registered new device driver usb
[ 0.120000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.130000] Bluetooth: Core ver 2.16
[ 0.130000] NET: Registered protocol family 31
[ 0.130000] Bluetooth: HCI device and connection manager initialized
[ 0.140000] Bluetooth: HCI socket layer initialized
[ 0.140000] Bluetooth: L2CAP socket layer initialized
[ 0.140000] Bluetooth: SCO socket layer initialized
[ 0.150000] Init eGon pin module V2.0
[ 0.150000] Switching to clocksource aw 64bits couter
[ 0.160000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.160000] FS-Cache: Loaded
[ 0.160000] CacheFiles: Loaded
[ 0.170000] Switched to NOHz mode on CPU #0
[ 0.170000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
[ 0.170000] [sw_hcd0]: usb host driver initialize........
[ 0.180000] [sw_hcd0]: open_usb_clock
[ 0.200000] [sw_hcd0]: host_init_state = 0
[ 0.200000] [sw_hcd0]: platform is usb host
[ 0.210000] WRN:L1440(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: request_irq 38 failed!
[ 0.210000] sw_hcd_dma_remove
[ 0.210000] WRN:L1493(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: sw_hcd_init_controller failed with status -19
[ 0.220000] WRN:L1699(drivers/usb/sun4i_usb/hcd/hcd0/sw_hcd0.c):ERR: sw_hcd_init_controller failed
[ 0.230000] [sw_udc]: udc_init: version 20080411
[ 0.230000] axp driver uning configuration failed(561)
[ 0.240000] axp driver uning configuration failed(573)
[ 0.240000] NET: Registered protocol family 2
[ 0.250000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.250000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.260000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.260000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.270000] TCP reno registered
[ 0.270000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.280000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.280000] NET: Registered protocol family 1
[ 0.290000] RPC: Registered named UNIX socket transport module.
[ 0.290000] RPC: Registered udp transport module.
[ 0.290000] RPC: Registered tcp transport module.
[ 0.300000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.300000] [pm]aw_pm_init!
[ 0.310000] audit: initializing netlink socket (disabled)
[ 0.310000] type=2000 audit(0.309:1): initialized
[ 0.330000] VFS: Disk quotas dquot_6.5.2
[ 0.330000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.340000] NTFS driver 2.1.30 [Flags: R/W].
[ 0.340000] fuse init (API version 7.16)
[ 0.350000] msgmni has been set to 615
[ 0.350000] alg: No test for stdrng (krng)
[ 0.360000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.360000] io scheduler noop registered
[ 0.370000] io scheduler deadline registered
[ 0.370000] io scheduler cfq registered (default)
[ 0.370000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.400000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
<6>console [ttyS0] enabled
[ 1.020000] console [ttyS0] enabled
[uart]: used uart info.: 0x05
[ 1.030000] [uart]: used uart info.: 0x05
<6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[ 1.060000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
[ 1.070000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
<6>sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
[ 1.100000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
[uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
[ 1.120000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
<7>G2D: drv_g2d_init
[ 1.130000] G2D: drv_g2d_init
<6>G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
[ 1.130000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
<6>G2D: head:d8000000,tail:d9000000
[ 1.150000] G2D: head:d8000000,tail:d9000000
<6>G2D: Module initialized.major:252
[ 1.150000] G2D: Module initialized.major:252
<6>brd: module loaded
[ 1.160000] brd: module loaded
<6>loop: module loaded
[ 1.170000] loop: module loaded
[NAND]nand driver, init.
[ 1.170000] [NAND]nand driver, init.
cmu_clk is 360
[ 1.180000] cmu_clk is 360
nand clk init end
[ 1.180000] nand clk init end
offset 0xc: 0x6141
[ 1.190000] offset 0xc: 0x6141
offset 0x14: 0x82000008
[ 1.190000] offset 0x14: 0x82000008
[NAND] nand gpio_request
[ 1.200000] [NAND] nand gpio_request
[NAND] nand driver version: 0x2 0x9
[ 1.210000] [NAND] nand driver version: 0x2 0x9
nand interrupte register ok
[ 1.210000] nand interrupte register ok
ret of NFC_ChangMode is 0
[ 1.220000] ret of NFC_ChangMode is 0
dma_hdle is 0
[ 1.230000] dma_hdle is 0
dma_hdle is 10000008
[ 1.230000] dma_hdle is 10000008
cmu_clk is 360
[ 1.240000] cmu_clk is 360
nand clk init end
[ 1.240000] nand clk init end
offset 0xc: 0x6141
[ 1.250000] offset 0xc: 0x6141
offset 0x14: 0x82000005
[ 1.250000] offset 0x14: 0x82000005
PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 1
[ 1.280000] PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 1
PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 0
[ 1.290000] PHY_PageReadSpare : too much ecc err,bank 0 block 0,page 0
insmod_device_driver
[ 2.200000]
[ 2.200000]
[ 2.200000] insmod_device_driver
[ 2.200000]
[sw_udc]: [ 2.210000] [sw_udc]: sw_usb_device_enable start
sw_usb_device_enable start
[sw_udc]: [ 2.210000] [sw_udc]: usb_vbase = 0xf1c13000
usb_vbase = 0xf1c13000
[sw_udc]: [ 2.220000] [sw_udc]: sram_vbase = 0xf1c00000
sram_vbase = 0xf1c00000
[sw_udc]: [ 2.230000] [sw_udc]: open_usb_clock
open_usb_clock
udc->driver is null, udc is need not stop
[ 2.260000] udc->driver is null, udc is need not stop
[sw_udc]: [ 2.270000] [sw_udc]: sw_usb_device_enable end
sw_usb_device_enable end
The 0 disk name = bootloader, class name = DISK, disk size = 32768
[ 2.780000] The 0 disk name = bootloader, class name = DISK, disk size = 32768
The 1 disk name = env, class name = DISK, disk size = 4096
[ 2.790000] The 1 disk name = env, class name = DISK, disk size = 4096
The 2 disk name = boot, class name = DISK, disk size = 65536
[ 2.810000] The 2 disk name = boot, class name = DISK, disk size = 65536
The 3 disk name = system, class name = DISK, disk size = 524288
[ 2.820000] The 3 disk name = system, class name = DISK, disk size = 524288
The 4 disk name = data, class name = DISK, disk size = 524288
[ 2.830000] The 4 disk name = data, class name = DISK, disk size = 524288
The 5 disk name = misc, class name = DISK, disk size = 2048
[ 2.840000] The 5 disk name = misc, class name = DISK, disk size = 2048
The 6 disk name = recovery, class name = DISK, disk size = 65536
[ 2.850000] The 6 disk name = recovery, class name = DISK, disk size = 65536
The 7 disk name = cache, class name = DISK, disk size = 262144
[ 2.870000] The 7 disk name = cache, class name = DISK, disk size = 262144
The 8 disk name = private, class name = DISK, disk size = 2048
[ 2.880000] The 8 disk name = private, class name = DISK, disk size = 2048
The 9 disk name = sysrecovery, class name = DISK, disk size = 655360
[ 2.890000] The 9 disk name = sysrecovery, class name = DISK, disk size = 655360
The 10 disk name = UDISK, class name = DISK, disk size = 13424640
[ 2.910000] The 10 disk name = UDISK, class name = DISK, disk size = 13424640
The 10 disk size = 13424640
[ 2.920000] The 10 disk size = 13424640
part total count = 11
[ 2.930000] part total count = 11
<6> nanda:
[ 2.930000] nanda:
<6> nandb: unknown partition table
[ 2.940000] nandb: unknown partition table
<6> nandc: unknown partition table
[ 2.950000] nandc: unknown partition table
<6> nandd: unknown partition table
[ 3.060000] nandd: unknown partition table
<6> nande: unknown partition table
[ 3.180000] nande: unknown partition table
<6> nandf: unknown partition table
[ 3.190000] nandf: unknown partition table
<6> nandg: unknown partition table
[ 3.190000] nandg: unknown partition table
<6> nandh: unknown partition table
[ 3.310000] nandh: unknown partition table
<6> nandi:
[ 3.320000] nandi:
<6> nandj: unknown partition table
[ 3.320000] nandj: unknown partition table
<6> nandk:
[ 3.440000] nandk:
<6>benn: nand probe enter
[ 3.440000] benn: nand probe enter
[NAND]nand driver, ok.
[ 3.450000] [NAND]nand driver, ok.
<6>wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c
[ 3.450000] wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c
<3>can't get information emac_power gpio
[ 3.470000] can't get information emac_power gpio
<6>[EMAC] ahb clk enable
[ 3.480000] [EMAC] ahb clk enable
<6>[EMAC] ahb gate clk: 0x26141
[ 3.480000] [EMAC] ahb gate clk: 0x26141
<7>wemac wemac.0: PHY SETUP, reg 0 value: 1000
[ 3.500000] wemac wemac.0: PHY SETUP, reg 0 value: 1000
<4>emac MAC isn't valid!
[ 3.510000] emac MAC isn't valid!
<7>wemac wemac.0: resetting device
[ 3.520000] wemac wemac.0: resetting device
release temp resource
[ 3.520000] release temp resource
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.530000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.540000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc082c0d4
[ 3.550000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc082c0d4
[sw-ehci1]: open clock
[ 3.570000] [sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
[ 3.590000] [sw-ehci1]: Set USB Power ON
<6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.600000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[ 3.610000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
<6>sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
[ 3.630000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
[ 3.660000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
[ 3.670000] hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
[ 3.670000] hub 1-0:1.0: 1 port detected
[sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc082c1e4
[ 3.680000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc082c1e4
[sw-ohci1]: open clock
[ 3.690000] [sw-ohci1]: open clock
<6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 3.720000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[ 3.730000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
<6>sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
[ 3.750000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
<6>hub 2-0:1.0: USB hub found
[ 3.810000] hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
[ 3.820000] hub 2-0:1.0: 1 port detected
[sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc082c2f8
[ 3.820000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc082c2f8
[sw-ehci2]: open clock
[ 3.840000] [sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
[ 3.860000] [sw-ehci2]: Set USB Power ON
<6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.870000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[ 3.880000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
<6>sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
[ 3.900000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
[ 3.930000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
ehci_irq: port change detect
[ 3.930000] ehci_irq: port change detect
<6>hub 3-0:1.0: USB hub found
[ 3.940000] hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
[ 3.950000] hub 3-0:1.0: 1 port detected
[sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc082c408
[ 3.960000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc082c408
[sw-ohci2]: open clock
[ 3.970000] [sw-ohci2]: open clock
<6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 4.000000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 4.010000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
<6>sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
[ 4.020000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
<6>hub 4-0:1.0: USB hub found
[ 4.090000] hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
[ 4.100000] hub 4-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
[ 4.100000] Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
[ 4.110000] usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
[ 4.120000] USB Mass Storage support registered.
<6>usbcore: registered new interface driver ums-alauda
[ 4.130000] usbcore: registered new interface driver ums-alauda
<6>usbcore: registered new interface driver ums-cypress
[ 4.140000] usbcore: registered new interface driver ums-cypress
<6>usbcore: registered new interface driver ums-datafab
[ 4.150000] usbcore: registered new interface driver ums-datafab
<6>usbcore: registered new interface driver ums_eneub6250
[ 4.160000] usbcore: registered new interface driver ums_eneub6250
<6>usbcore: registered new interface driver ums-freecom
[ 4.180000] usbcore: registered new interface driver ums-freecom
<6>usbcore: registered new interface driver ums-isd200
[ 4.190000] usbcore: registered new interface driver ums-isd200
<6>usbcore: registered new interface driver ums-jumpshot
[ 4.200000] usbcore: registered new interface driver ums-jumpshot
<6>usbcore: registered new interface driver ums-karma
[ 4.210000] usbcore: registered new interface driver ums-karma
<6>usbcore: registered new interface driver ums-onetouch
[ 4.220000] usbcore: registered new interface driver ums-onetouch
<6>usbcore: registered new interface driver ums-realtek
[ 4.230000] usbcore: registered new interface driver ums-realtek
<6>usbcore: registered new interface driver ums-sddr09
[ 4.240000] usbcore: registered new interface driver ums-sddr09
<6>usbcore: registered new interface driver ums-sddr55
[ 4.250000] usbcore: registered new interface driver ums-sddr55
<6>usbcore: registered new interface driver ums-usbat
[ 4.260000] usbcore: registered new interface driver ums-usbat
<6>mousedev: PS/2 mouse device common for all mice
[ 4.270000] mousedev: PS/2 mouse device common for all mice
<6>usb 3-1: new high speed USB device number 2 using sw-ehci
[ 4.280000] usb 3-1: new high speed USB device number 2 using sw-ehci
sunxi RTC version 0.1
[ 4.300000] sunxi RTC version 0.1
<6>sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
[ 4.300000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
<6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 4.310000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
<6>sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:8
[ 4.320000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:8
<6>using rtc device, rtc, for alarms[ 4.330000] using rtc device, rtc, for alarms<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 4.340000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
<6>i2c /dev entries driver
[ 4.350000] i2c /dev entries driver
!!! base_Addr = 0xdc8d2c00
[ 4.360000] !!! base_Addr = 0xdc8d2c00
config i2c gpio with gpio_config api
[ 4.360000] config i2c gpio with gpio_config api
twi0, apb clock = 24000000
[ 4.370000] twi0, apb clock = 24000000
<6>axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[ 4.380000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[AXP]axp driver uning configuration failed(323)
[ 4.390000] [AXP]axp driver uning configuration failed(323)
[AXP]power_start = 0
[ 4.400000] [AXP]power_start = 0
<6>I2C: i2c-0: AW16XX I2C adapter
[ 4.410000] I2C: i2c-0: AW16XX I2C adapter
**********start************
[ 4.410000] **********start************
0x40
[ 4.420000] 0x40
0xf8
[ 4.420000] 0xf8
0x28
[ 4.420000] 0x28
0x0
[ 4.430000] 0x0
0x0
[ 4.430000] 0x0
**********end************
[ 4.430000] **********end************
!!! base_Addr = 0xdc8d4000
[ 4.440000] !!! base_Addr = 0xdc8d4000
twi1, apb clock = 24000000
[ 4.440000] twi1, apb clock = 24000000
<6>I2C: i2c-1: AW16XX I2C adapter
[ 4.450000] I2C: i2c-1: AW16XX I2C adapter
**********start************
[ 4.460000] **********start************
0x40
[ 4.460000] 0x40
0xf8
[ 4.470000] 0xf8
0x58
[ 4.470000] 0x58
0x0
[ 4.470000] 0x0
0x0
[ 4.470000] 0x0
**********end************
[ 4.480000] **********end************
!!! base_Addr = 0xdc8d6400
[ 4.480000] !!! base_Addr = 0xdc8d6400
twi2, apb clock = 24000000
[ 4.490000] twi2, apb clock = 24000000
<6>I2C: i2c-2: AW16XX I2C adapter
[ 4.500000] I2C: i2c-2: AW16XX I2C adapter
**********start************
[ 4.500000] **********start************
0x40
[ 4.510000] 0x40
0xf8
[ 4.510000] 0xf8
0x58
[ 4.520000] 0x58
0x0
[ 4.520000] 0x0
0x0
[ 4.520000] 0x0
**********end************
[ 4.520000] **********end************
<6>lirc_dev: IR Remote Control driver registered, major 251
[ 4.530000] lirc_dev: IR Remote Control driver registered, major 251
<6>IR NEC protocol handler initialized
[ 4.540000] IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
[ 4.550000] IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
[ 4.560000] IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
[ 4.570000] IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
[ 4.570000] IR Sony protocol handler initialized
<6>IR RC5 (streamzap) protocol handler initialized
[ 4.580000] IR RC5 (streamzap) protocol handler initialized
<6>IR LIRC bridge handler initialized
[ 4.590000] IR LIRC bridge handler initialized
<6>Linux video capture interface: v2.00
[ 4.600000] Linux video capture interface: v2.00
[cedar dev]: install start!!!
[ 4.610000] [cedar dev]: install start!!!
[cedar dev]: install end!!!
[ 4.610000] [cedar dev]: install end!!!
[ace_drv] start!!!
[ 4.620000] [ace_drv] start!!!
[ace_drv] init end!!!
[ 4.630000] [ace_drv] init end!!!
[pa_drv] start!!!
[ 4.630000] [pa_drv] start!!!
[pa_drv] init end!!!
[ 4.640000] [pa_drv] init end!!!
<6>print_constraints: axp20_ldo1: 1300 mV
[ 4.640000] print_constraints: axp20_ldo1: 1300 mV
<6>print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 4.650000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 4.670000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
<6>print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 4.680000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
<6>print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
[ 4.690000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
<6>print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
[ 4.710000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
<6>print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 4.720000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
<6>input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[ 4.730000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
<6>Bluetooth: HCI UART driver ver 2.2
[ 4.760000] Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
[ 4.770000] Bluetooth: HCI H4 protocol initialized
<6>Bluetooth: HCI BCSP protocol initialized
[ 4.780000] Bluetooth: HCI BCSP protocol initialized
<6>Bluetooth: HCILL protocol initialized
[ 4.790000] Bluetooth: HCILL protocol initialized
<6>cpuidle: using governor ladder
[ 4.800000] cpuidle: using governor ladder
<6>cpuidle: using governor menu
[ 4.810000] cpuidle: using governor menu
[wifi]: Select sdio wifi: swl-n20 !!
[ 4.810000] [wifi]: Select sdio wifi: swl-n20 !!
[mmc_pm]: SDIO card gpio init is OK !!
[ 4.820000] [mmc_pm]: SDIO card gpio init is OK !!
[mmc]: sunximmc_init
[ 4.830000] [mmc]: sunximmc_init
[mmc]: sunxi mmc controller using config : 0xb
[ 4.830000] [mmc]: sunxi mmc controller using config : 0xb
[mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[ 4.840000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[mmc]: mmc 0 power off !!
[ 4.860000] [mmc]: mmc 0 power off !!
[mmc]: mmc0 Probe: base:0xdc8de000 irq:32 dma:0 pdes:0xd9aac000, ret 0.
[ 4.860000] [mmc]: mmc0 Probe: base:0xdc8de000 irq:32 dma:0 pdes:0xd9aac000, ret 0.
[mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[ 4.880000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[mmc]: mmc 1 power off !!
[ 4.890000] [mmc]: mmc 1 power off !!
[mmc]: mmc1 Probe: base:0xdc8e0000 irq:33 dma:0 pdes:0xd9ab4000, ret 0.
[ 4.890000] [mmc]: mmc1 Probe: base:0xdc8e0000 irq:33 dma:0 pdes:0xd9ab4000, ret 0.
[mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[ 4.910000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[mmc]: mmc 3 power off !!
[ 4.920000] [mmc]: mmc 3 power off !!
[mmc]: mmc3 Probe: base:0xdc8e2000 irq:35 dma:0 pdes:0xd9ab8000, ret 0.
[ 4.920000] [mmc]: mmc3 Probe: base:0xdc8e2000 irq:35 dma:0 pdes:0xd9ab8000, ret 0.
<6>usbcore: registered new interface driver usbhid
[ 4.940000] usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
[ 4.950000] usbhid: USB HID core driver
enter sun4i Audio codec!!!
[ 4.960000] enter sun4i Audio codec!!!
<6>sun4i audio support initialized
[ 4.960000] sun4i audio support initialized
audiocodec_adap_awxx_init: script_parser_fetch err.
[ 4.970000] audiocodec_adap_awxx_init: script_parser_fetch err.
sun4i Audio codec successfully loaded..
[ 4.980000] sun4i Audio codec successfully loaded..
<6>asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
[ 4.990000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
<6>ALSA device list:
[ 5.000000] ALSA device list:
<6> #0: sun4i-CODEC Audio Codec
[ 5.010000] #0: sun4i-CODEC Audio Codec
<6> #1: sun4i-sndhdmi
[ 5.010000] #1: sun4i-sndhdmi
<6>IPv4 over IPv4 tunneling driver
[ 5.020000] IPv4 over IPv4 tunneling driver
<6>TCP cubic registered
[ 5.030000] TCP cubic registered
<6>Initializing XFRM netlink socket
[ 5.030000] Initializing XFRM netlink socket
<6>NET: Registered protocol family 10
[ 5.040000] NET: Registered protocol family 10
<6>NET: Registered protocol family 17
[ 5.050000] NET: Registered protocol family 17
<6>NET: Registered protocol family 15
[ 5.060000] NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
[ 5.070000] Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
[ 5.070000] Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
[ 5.080000] Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.090000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: BNEP filters: protocol multicast
[ 5.100000] Bluetooth: BNEP filters: protocol multicast
<6>802.1Q VLAN Support v1.8
[ 5.110000] 802.1Q VLAN Support v1.8
<6>VFP support v0.3: [ 5.120000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
implementor 41 architecture 3 part 30 variant c rev 3
<5>Registering SWP/SWPB emulation handler
[ 5.130000] Registering SWP/SWPB emulation handler
<6>registered taskstats version 1
[ 5.140000] registered taskstats version 1
<4>regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[ 5.150000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[ 5.160000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[ 5.180000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[ 5.190000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[ 5.210000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
<4>regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[ 5.220000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
<6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 5.230000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
<6>sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:9
[ 5.240000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:9
<6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:09 UTC (1262304009)
[ 5.250000] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:09 UTC (1262304009)
<6>Waiting for root device /dev/mmcblk0p2...
[ 5.270000] Waiting for root device /dev/mmcblk0p2...
[mmc]: mmc 0 detect change, present 1
[ 5.860000] [mmc]: mmc 0 detect change, present 1
[mmc]: mmc 0 power on !!
[ 6.160000] [mmc]: mmc 0 power on !!
[mmc]: sdxc_request_done(L1113): [ 6.200000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
smc 0 err, cmd 52, RTO !!
[mmc]: sdxc_request_done(L1113): [ 6.210000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
smc 0 err, cmd 52, RTO !!
[mmc]: sdxc_request_done(L1113): [ 6.220000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): [ 6.240000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): [ 6.250000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
smc 0 err, cmd 5, RTO !!
[mmc]: sdxc_request_done(L1113): [ 6.260000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
smc 0 err, cmd 5, RTO !!
<6>mmc0: new high speed SDHC card at address 0002
[ 6.310000] mmc0: new high speed SDHC card at address 0002
<6>mmcblk0: mmc0:0002 00000 14.9 GiB
[ 6.320000] mmcblk0: mmc0:0002 00000 14.9 GiB
<6> mmcblk0: p1 p2
[ 6.330000] mmcblk0: p1 p2
<3>EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
[ 6.380000] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
<3>EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
[ 6.390000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
<6>EXT4-fs (mmcblk0p2): recovery complete
[ 7.960000] EXT4-fs (mmcblk0p2): recovery complete
<6>EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.050000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
<6>VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 8.070000] VFS: Mounted root (ext4 filesystem) on device 179:2.
<6>devtmpfs: mounted
[ 8.090000] devtmpfs: mounted
<6>Freeing init memory: 164K
[ 8.100000] Freeing init memory: 164K
<3>init: Failed to create pty - disabling logging for job
[ 8.450000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 8.460000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 8.510000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 8.530000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 8.550000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 8.570000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 8.590000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 8.610000] init: Temporary process spawn error: No such file or directory
<4>init: ureadahead main process (52) terminated with status 5
[ 8.800000] init: ureadahead main process (52) terminated with status 5
<3>init: Failed to create pty - disabling logging for job
[ 9.640000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 9.650000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 9.740000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 9.750000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 10.030000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 10.050000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 10.270000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 10.280000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 10.560000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 10.570000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 10.610000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 10.620000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 10.640000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 10.670000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 11.730000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 11.750000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 11.790000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 11.810000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 11.860000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
[ 11.880000] init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 12.040000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 12.190000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 12.310000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 12.520000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 12.760000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 13.730000] init: Failed to create pty - disabling logging for job
<30>udevd[155]: starting version 175
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 13.780000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 13.800000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
SATA AHCI Phy Power Failed!!
<3>init: Failed to create pty - disabling logging for job
[ 15.080000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 15.320000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
sw_usb_enable_hcd: usbc_num = 2
WRN:L894(drivers/usb/host/ehci_sun4i.c):ERR: not support sw_usb_enable_ehci
WRN:L780(drivers/usb/host/ohci_sun4i.c):ERR: not support sw_usb_enable_ohci
rtw driver version=v3.3.2_3192.20120103
register rtw_netdev_ops to netdev_ops
CHIP TYPE: RTL8188C_8192C
usb_endpoint_descriptor(0):
bLength=7
bDescriptorType=5
bEndpointAddress=81
wMaxPacketSize=200
bInterval=0
SATA AHCI Phy Calibration Failed!!
RT_usb_endpoint_is_bulk_in = 1
usb_endpoint_descriptor(1):
bLength=7
bDescriptorType=5
bEndpointAddress=2
err: gpio count < =0 ,gpio_count is: 0
<6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
wMaxPacketSize=200
bInterval=0
RT_usb_endpoint_is_bulk_out = 2
usb_endpoint_descriptor(2):
bLength=7
bDescriptorType=5
<4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
<6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
bEndpointAddress=3
wMaxPacketSize=200
bInterval=0
RT_usb_endpoint_is_bulk_out = 3
usb_endpoint_descriptor(3):
<6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
<6>scsi0 : sw_ahci_platform
<6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 56
bLength=7
bDescriptorType=5
bEndpointAddress=84
wMaxPacketSize=40
<3>init: Failed to create pty - disabling logging for job
[ 15.980000] init: Failed to create pty - disabling logging for job
bInterval=1
RT_usb_endpoint_is_int_in = 4, Interval = 1
nr_endpoint=4, in_num=2, out_num=2
USB_SPEED_HIGH
Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
RF_Type is 3!!
EEPROM type is E-FUSE
====> ReadAdapterInfo8192C
<4>init: Temporary process spawn error: No such file or directory
Boot from EFUSE, Autoload OK !
<3>init: Failed to create pty - disabling logging for job
[ 16.060000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<6>ata1: SATA link down (SStatus 0 SControl 300)
UMP<2>: Inserting UMP device driver. Compiled: Jul 26 2012, time: 04:16:52
UMP<2>: Using OS memory backend, allocation limit: 134217728
UMP: UMP device driver loaded
<4>init: failsafe main process (269) killed by TERM signal
EEPROMVID = 0x0bda
EEPROMPID = 0x8176
EEPROMCustomerID : 0x00
EEPROMSubCustomerID: 0x00
RT_CustomerID: 0x00
_ReadMACAddress MAC Address from EFUSE = 48:02:2a:ea:49:4a
EEPROMRegulatory = 0x0
_ReadBoardType(0)
BT Coexistance = disable
RT_ChannelPlan: 0x0a
_ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(10) ,bSupportRemoteWakeup(1)
### PS params=> power_mgnt(1),usbss_enable(0) ###
### AntDivCfg(0)
readAdapterInfo_8192CU(): REPLACEMENT = 0
<==== ReadAdapterInfo8192C in 550 ms
padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
rtw_macaddr_cfg MAC Address = 48:02:2a:ea:49:4a
MAC Address from pnetdev->dev_addr= 48:02:2a:ea:49:4a
bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<6>usbcore: registered new interface driver rtl8192cu
<3>init: Failed to create pty - disabling logging for job
[ 16.740000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
* Using makefile-style concurre<4>[LCD] nt boot in runlevel S
lcd_module_init
<3>init: Failed to create pty - disabling logging for job
[ 16.830000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<4>init: udev-fallback-graphics main process (310) terminated with status 1
<3>init: Failed to create pty - disabling logging for job
[ 17.020000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.070000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.120000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<6>mali: use config clk_div 3
<6>mali: clk_div 3
Mali: mali clock set completed, clock is 320000000 Mhz
Mali: Mali device driver loaded
<3>init: Failed to create pty - disabling logging for job
[ 17.350000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
* Using makefile-style concurrent boot in runlevel 2
<3>init: Failed to create pty - disabling logging for job
[ 17.410000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.450000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.520000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.550000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.660000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.710000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.750000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.820000] init: Failed to create pty - disabling logging for job
<6>[drm] Initialized drm 1.1.0 20060810
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 17.880000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<4>init: plymouth main process (53) killed by SEGV signal
* Starting web server apache2 <4>init: plymouth-splash main process (338) terminated with status 2
Last login: Fri Jan 1 00:00:21 UTC 2010 on tty1
Welcome to Linaro 12.07 (GNU/Linux 3.0.38+ armv7l)
* Documentation: https://wiki.linaro.org/
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
<4>init: mysql main process (390) terminated with status 1
<4>init: mysql main process ended, respawning
[ OK ]
<4>init: mysql post-start process (392) terminated with status 1
<3>init: Failed to create pty - disabling logging for job
[ 21.290000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 21.420000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<3>init: Failed to create pty - disabling logging for job
[ 21.560000] init: Failed to create pty - disabling logging for job
<4>init: Temporary process spawn error: No such file or directory
<4>init: plymouth-stop pre-start process (484) terminated with status 1
<4>init: tty1 main process (494) killed by TERM signal
<4>init: mysql main process (476) terminated with status 1
<4>init: mysql main process ended, respawning
<4>init: mysql post-start process (480) terminated with status 1
<4>init: mysql main process (550) terminated with status 1
<4>init: mysql respawning too fast, stopped
root@linaro-server:~#
root@linaro-server:~#
root@linaro-server:~#
root@linaro-server:~#
root@linaro-server:~# ps axf
PID TTY STAT TIME COMMAND
2 ? S 0:00 [kthreadd]
3 ? S 0:00 \_ [ksoftirqd/0]
4 ? S 0:00 \_ [kworker/0:0]
5 ? S 0:00 \_ [kworker/u:0]
6 ? S 0:00 \_ [rcu_kthread]
7 ? S< 0:00 \_ [cpuset]
8 ? S< 0:00 \_ [khelper]
9 ? S< 0:00 \_ [netns]
10 ? S 0:00 \_ [sync_supers]
11 ? S 0:00 \_ [bdi-default]
12 ? S< 0:00 \_ [kintegrityd]
13 ? S< 0:00 \_ [kblockd]
14 ? S< 0:00 \_ [ata_sff]
15 ? S 0:00 \_ [khubd]
16 ? S 0:00 \_ [kworker/0:1]
17 ? S< 0:00 \_ [cfg80211]
18 ? D 0:00 \_ [usb-hardware-sc]
19 ? S< 0:00 \_ [rpciod]
20 ? S 0:00 \_ [khungtaskd]
21 ? S 0:00 \_ [kswapd0]
22 ? SN 0:00 \_ [ksmd]
23 ? S 0:00 \_ [fsnotify_mark]
24 ? S< 0:00 \_ [nfsiod]
25 ? S< 0:00 \_ [crypto]
38 ? S 0:00 \_ [nandd]
39 ? S 0:00 \_ [nfmtd]
40 ? S< 0:00 \_ [kpsmoused]
41 ? S< 0:00 \_ [kfantasy]
42 ? S 0:00 \_ [kworker/u:1]
43 ? S< 0:00 \_ [codec_resume]
44 ? S< 0:00 \_ [krfcommd]
45 ? S 0:01 \_ [mmcqd/0]
46 ? S 0:00 \_ [jbd2/mmcblk0p2-]
47 ? S< 0:00 \_ [ext4-dio-unwrit]
48 ? S 0:00 \_ [ext4lazyinit]
116 ? S 0:00 \_ [flush-179:0]
226 ? S 0:00 \_ [kworker/0:2]
262 ? S 0:00 \_ [scsi_eh_0]
325 ? S 0:00 \_ [hdmi proc]
343 ? S< 0:00 \_ [mali-pmm-wq]
1 ? Ss 0:05 /sbin/init
130 ? Ssl 0:00 lttng-sessiond
131 ? S 0:00 upstart-udev-bridge --daemon
144 ? Ss 0:00 /usr/sbin/sshd -D
155 ? Ss 0:00 /sbin/udevd --daemon
239 ? S 0:00 \_ /sbin/udevd --daemon
243 ? S 0:00 \_ /sbin/udevd --daemon
162 ? Sl 0:00 rsyslogd -c5
296 ? S 0:00 upstart-socket-bridge --daemon
347 tty4 Ss+ 0:00 /sbin/getty -8 38400 tty4
350 tty5 Ss+ 0:00 /sbin/getty -8 38400 tty5
354 ttyS0 Ss 0:00 /bin/login -f
417 ttyS0 S 0:01 \_ -bash
596 ttyS0 R+ 0:00 \_ ps axf
360 tty2 Ss+ 0:00 /sbin/getty -8 38400 tty2
361 tty3 Ss+ 0:00 /sbin/getty -8 38400 tty3
367 tty6 Ss+ 0:00 /sbin/getty -8 38400 tty6
381 ? Ss 0:00 atd
388 ? Ss 0:00 cron
441 ? Ss 0:00 /usr/sbin/apache2 -k start
487 ? S 0:00 \_ /usr/sbin/apache2 -k start
488 ? S 0:00 \_ /usr/sbin/apache2 -k start
489 ? S 0:00 \_ /usr/sbin/apache2 -k start
492 ? S 0:00 \_ /usr/sbin/apache2 -k start
493 ? S 0:00 \_ /usr/sbin/apache2 -k start
474 ? S 0:00 /bin/sh /etc/init.d/ondemand background
478 ? S 0:00 \_ sleep 60
507 tty1 Ss 0:00 /bin/login -f
516 tty1 S+ 0:00 \_ -bash
root@linaro-server:~# top
top - 00:00:43 up 0 min, 2 users, load average: 1.95, 0.52, 0.17
Tasks: 69 total, 1 running, 68 sleeping, 0 stopped, 0 zombie
Cpu(s): 17.1%us, 31.6%sy, 0.0%ni, 36.6%id, 11.1%wa, 0.0%hi, 3.6%si, 0.0%st
Mem: 315348k total, 76220k used, 239128k free, 4700k buffers
Swap: 0k total, 0k used, 0k free, 47708k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
597 root 20 0 2024 916 696 R 19.2 0.3 0:00.47 top
45 root 20 0 0 0 0 D 6.0 0.0 0:02.47 mmcqd/0
1 root 20 0 2472 1480 980 S 0.0 0.5 0:05.33 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:00.08 ksoftirqd/0
4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
5 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u:0
6 root -2 0 0 0 0 S 0.0 0.0 0:00.12 rcu_kthread
7 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset
8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 sync_supers
11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 bdi-default
12 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kintegrityd
13 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
14 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff
top - 00:00:47 up 0 min, 2 users, load average: 1.87, 0.52, 0.18
Tasks: 69 total, 1 running, 68 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.8%us, 4.7%sy, 0.0%ni, 82.1%id, 10.5%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 315348k total, 76220k used, 239128k free, 4700k buffers
Swap: 0k total, 0k used, 0k free, 47708k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
597 root 20 0 2028 984 760 R 6.4 0.3 0:00.68 top
45 root 20 0 0 0 0 S 1.8 0.0 0:02.53 mmcqd/0
3 root 20 0 0 0 0 S 0.6 0.0 0:00.10 ksoftirqd/0
6 root -2 0 0 0 0 S 0.3 0.0 0:00.13 rcu_kthread
1 root 20 0 2472 1480 980 S 0.0 0.5 0:05.33 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
5 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u:0
7 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset
8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 sync_supers
11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 bdi-default
12 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kintegrityd
13 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
14 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff
15 root 20 0 0 0 0 S 0.0 0.0 0:00.03 khubd
root@linaro-server:~# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@linaro-server:~# ifconfig -a
eth0 Link encap:Ethernet HWaddr 1a:4c:1f:e3:b7:a3
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:55 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tunl0 Link encap:IPIP Tunnel HWaddr
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 48:02:2a:ea:49:4a
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@linaro-server:~#
root@linaro-server:~# cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
root@linaro-server:~# iw
iw: command not found
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment