Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
dmesg output from Remix OS running on Jide Remix Mini
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<6>[ 0.000000] Initializing cgroup subsys cpuacct
<5>[ 0.000000] Linux version 3.10.93 (jenkins@pallas.corp.jide.com) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #1 SMP PREEMPT Thu Jan 14 13:49:55 CST 2016
<4>[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
<6>[ 0.000000] Machine: sun50iw1p1
<6>[ 0.000000] bootconsole [earlycon0] enabled
<6>[ 0.000000] cma: CMA: reserved 300 MiB at ad400000
<7>[ 0.000000] On node 0 totalpages: 520192
<7>[ 0.000000] DMA zone: 7112 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 520192 pages, LIFO batch:31
<4>[ 0.000000] script_init enter!
<4>[ 0.000000] script_init exit!
<6>[ 0.000000] psci: probing for conduit method from DT.
<6>[ 0.000000] psci: PSCIv0.2 detected in firmware.
<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
<6>[ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc06c378000 s19072 r8192 d21888 u49152
<7>[ 0.000000] pcpu-alloc: s19072 r8192 d21888 u49152 alloc=12*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513080
<5>[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x01c28000 initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p7 init=/init partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:verity_block@mmcblk0p8:misc@mmcblk0p9:recovery@mmcblk0p10:private@mmcblk0p11:alog@mmcblk0p12:Reserve0@mmcblk0p13:Reserve1@mmcblk0p14:Reserve2@mmcblk0p15:cache@mmcblk0p16:UDISK@mmcblk0p1 cma=300M mac_addr=40:9F:87:0B:01:DB wifi_mac= bt_mac= specialstr= androidboot.serialno=JS2E300154660800 serialno=JS2E300154660800 boot_type=2 androidboot.hardware=sun50iw1p1
<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.000000] Memory: 2032MB = 2032MB total
<5>[ 0.000000] Memory: 1721908k/1721908k available, 358860k reserved
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
<5>[ 0.000000] vmemmap : 0xffffffbc00e38000 - 0xffffffbc02a00000 ( 27 MB)
<5>[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
<5>[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc07f000000 ( 2032 MB)
<5>[ 0.000000] .init : 0xffffffc000aef000 - 0xffffffc000b79a80 ( 555 kB)
<5>[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000aeebc4 ( 10683 kB)
<5>[ 0.000000] .data : 0xffffffc000b7a000 - 0xffffffc000ced470 ( 1486 kB)
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:64 nr_irqs:64 0
<6>[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
<6>[ 0.000000] Console: colour dummy device 80x25
<6>[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
<6>[ 0.012452] pid_max: default: 32768 minimum: 301
<6>[ 0.017443] Security Framework initialized
<6>[ 0.020017] SELinux: Disabled at boot.
<6>[ 0.024030] Mount-cache hash table entries: 256
<6>[ 0.030267] Initializing cgroup subsys debug
<6>[ 0.032508] Initializing cgroup subsys freezer
<6>[ 0.037051] ftrace: allocating 28414 entries in 111 pages
<6>[ 0.060733] CPU0: update cpu_power 1968128
<6>[ 0.062555] virtual base = 0xffffff800000a000.
<6>[ 0.063660] gicd_base = 0xffffff800000c000.
<6>[ 0.067832] gicc_base = 0xffffff800000e000.
<4>[ 0.010000] CPU1: Booted secondary processor
<6>[ 0.010000] CPU1: update cpu_power 1968128
<4>[ 0.010000] CPU2: Booted secondary processor
<6>[ 0.010000] CPU2: update cpu_power 1968128
<4>[ 0.010000] CPU3: Booted secondary processor
<6>[ 0.010000] CPU3: update cpu_power 1968128
<6>[ 0.071851] Brought up 4 CPUs
<6>[ 0.080012] SMP: Total of 4 processors activated (192.00 BogoMIPS).
<6>[ 0.086967] devtmpfs: initialized
<6>[ 0.120764] atomic64 test passed
<6>[ 0.120790] pinctrl core: initialized pinctrl subsystem
<6>[ 0.133722] NET: Registered protocol family 16
<6>[ 0.133722] script_sysfs_init success
<6>[ 0.133722] dump_class_init,806, success
<6>[ 0.140375] vdso: 2 pages (1 code, 1 data) at base ffffffc000b81000
<6>[ 0.144960] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
<6>[ 0.151261] software IO TLB [mem 0xaa400000-0xaa800000] (4MB) mapped at [ffffffc069400000-ffffffc0697fffff]
<6>[ 0.160742] DMA: preallocated 256 KiB pool for atomic allocations
<3>[ 0.165625] axp81x_board_init: axp regl_devs num = 23
<6>[ 0.170180] pll_audio-set_default_rate=24576000 success!
<6>[ 0.175037] pll_video0-set_default_rate=297000000 success!
<6>[ 0.180041] pll_ve-set_default_rate=420000000 success!
<6>[ 0.185115] pll_video1-set_default_rate=297000000 success!
<6>[ 0.190098] pll_de-set_default_rate=432000000 success!
<6>[ 0.195356] ahb1-set_default_rate=200000000 success!
<6>[ 0.200908] de-set_default_source=pll_de success!
<6>[ 0.204603] de-set_default_rate=432000000 success!
<6>[ 0.209349] tcon0-set_default_source=pll_mipi success!
<6>[ 0.210051] tcon1-set_default_source=pll_video0 success!
<6>[ 0.215520] hdmi-set_default_source=pll_video0 success!
<4>[ 0.221817] adda_com_reg_readl: reg = 0xffffff80000545c0
<6>[ 0.225519] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
<4>[ 0.230353] [sun50iw1p1_pinctrl_probe][837]
<6>[ 0.236209] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
<6>[ 0.240522] sunxi hwspinlock vbase:0xffffff800005c000
<6>[ 0.260356] sunxi_chipid_probe,205: soc bin:0
<6>[ 0.320372] bio: create slab <bio-0> at 0
<6>[ 0.321054] pwm module init!
<5>[ 0.331064] SCSI subsystem initialized
<6>[ 0.331064] usbcore: registered new interface driver usbfs
<6>[ 0.332666] usbcore: registered new interface driver hub
<6>[ 0.340241] usbcore: registered new device driver usb
<6>[ 0.344800] Linux video capture interface: v2.00
<5>[ 0.350235] [ARISC] :sunxi-arisc driver v1.10
<5>[ 0.370460] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
<6>[ 0.370661] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.380695] Bluetooth: Core ver 2.16
<6>[ 0.382130] NET: Registered protocol family 31
<6>[ 0.384168] Bluetooth: HCI device and connection manager initialized
<6>[ 0.390039] Bluetooth: HCI socket layer initialized
<6>[ 0.394789] Bluetooth: L2CAP socket layer initialized
<6>[ 0.399761] Bluetooth: SCO socket layer initialized
<6>[ 0.400621] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 0.405801] [pm]aw_pm_init!
<6>[ 0.405801] rtc physical base = 0x0000000001f00000 .
<6>[ 0.410049] np name = /soc@01c00000/rtc@01f00000.
<4>[ 0.414684] base = ffffff800006e100, len = 4.
<4>[ 0.418947] pmu name: pmu0 .
<6>[ 0.420044] pmu0_enable = 0x1.
<6>[ 0.423068] pmux_id = 0x6.
<6>[ 0.425798] pmux_twi_id = 0x1.
<6>[ 0.428868] pmux_twi_addr = 0x34.
<4>[ 0.430007] pmu name: pmu1 .
<3>[ 0.432864] Warning: can not find np for pmu1.
<6>[ 0.437659] after inited: sys_mask config = 0xca55.
<3>[ 0.440027] Warning: can not find np for dynamic_standby_para.
<4>[ 0.445931] [pm]valid
<4>[ 0.448013] [pm]valid
<4>[ 0.450007] Notice: sun9i&sun8iw5&sun50i not need support normal standby, change to super standby.
<4>[ 0.459317] i2c-core: driver [ACX00-CHIP] using legacy suspend method
<4>[ 0.460008] i2c-core: driver [ACX00-CHIP] using legacy resume method
<6>[ 0.466237] acx00_detect, l:312, twi_id:0, adapter->nr:0
<3>[ 0.470216] acx00_i2c_probe,l:222
<3>[ 0.473210] acx00_init_work,l:90
<6>[ 0.476510] acx00_detect, l:312, twi_id:0, adapter->nr:1
<6>[ 0.480523] Switching to clocksource arch_sys_counter
<5>[ 0.520092] FS-Cache: Loaded
<6>[ 0.520630] CacheFiles: Loaded
<6>[ 0.548091] NET: Registered protocol family 2
<6>[ 0.549851] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
<6>[ 0.554323] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
<6>[ 0.560911] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.568176] TCP: reno registered
<6>[ 0.570327] UDP hash table entries: 1024 (order: 3, 32768 bytes)
<6>[ 0.576237] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
<6>[ 0.583492] NET: Registered protocol family 1
<6>[ 0.587959] RPC: Registered named UNIX socket transport module.
<6>[ 0.593130] RPC: Registered udp transport module.
<6>[ 0.597537] RPC: Registered tcp transport module.
<6>[ 0.602301] RPC: Registered tcp NFSv4.1 backchannel transport module.
<3>[ 0.608862] acx00_init_work,l:93
<6>[ 0.612812] Unpacking initramfs...
<6>[ 0.788392] Freeing initrd memory: 3292K (ffffffc001000000 - ffffffc001337000)
<6>[ 0.792725] lock super standby defaultly!
<6>[ 0.794077] lookup_scene_lock_name: new scene lock super_standby
<6>[ 0.800092] scene_lock_init name=super_standby
<6>[ 0.804428] scene_lock: super_standby, type 5, count 1
<6>[ 0.811048] audit: initializing netlink socket (disabled)
<5>[ 0.815004] type=2000 audit(0.810:1): initialized
<5>[ 0.824482] FS-Cache: Netfs 'nfs' registered for caching
<5>[ 0.826264] FS-Cache: Netfs 'cifs' registered for caching
<6>[ 0.831239] NTFS driver 2.1.30 [Flags: R/W].
<6>[ 0.834768] fuse init (API version 7.22)
<6>[ 0.839690] msgmni has been set to 3969
<6>[ 0.844123] NET: Registered protocol family 38
<6>[ 0.846720] io scheduler noop registered
<6>[ 0.850624] io scheduler deadline registered
<6>[ 0.854895] io scheduler cfq registered (default)
<6>[ 0.860895] [DISP]disp_module_init
<6>[ 0.863793] [DISP] init_disp:0x20b0404
<6>[ 0.866587] [DISP] boot_disp:0x0
<4>[ 0.870672] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
<4>[ 0.879109] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
<4>[ 0.888459] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
<6>[ 0.898770] [DISP] fb_base:0x47400000
<6>[ 0.913858] [DISP]disp_module_init finish
<6>[ 0.914667] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
<4>[ 0.918151] sw_uart_pm()864 - uart0 clk is already enable
<4>[ 0.923816] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n
<6>[ 0.931566] console [ttyS0] enabled, bootconsole disabled
<6>[ 0.943945] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
<6>[ 0.957187] misc dump reg init
<6>[ 0.968636] loop: module loaded
<6>[ 0.972488] sunxi-bt bt.33: bt_power_name (vcc-wifi)
<6>[ 0.977913] sunxi-bt bt.33: io_regulator_name (vcc-wifi-io)
<6>[ 0.984240] sunxi-bt bt.33: bt_rst gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0
<4>[ 0.993445] sunxi-bt bt.33: block state already is 1
<6>[ 0.999402] sunxi-wlan wlan.32: wlan_busnum (1)
<6>[ 1.004725] sunxi-wlan wlan.32: wlan_power_name (vcc-wifi)
<6>[ 1.010834] sunxi-wlan wlan.32: io_regulator_name (vcc-wifi-io)
<6>[ 1.017314] sunxi-wlan wlan.32: wlan_regon gpio=354 mul-sel=1 pull=-1 drv_level=-1 data=0
<6>[ 1.027192] sunxi-wlan wlan.32: wlan_hostwake gpio=355 mul-sel=6 pull=-1 drv_level=-1 data=0
<6>[ 1.044768] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.050398] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<4>[ 1.058237] WARNING: Get ephy clock is failed
<6>[ 1.064433] PPP generic driver version 2.4.2
<6>[ 1.069693] PPP BSD Compression module registered
<6>[ 1.074929] PPP Deflate Compression module registered
<6>[ 1.080565] PPP MPPE Compression module registered
<6>[ 1.085795] NET: Registered protocol family 24
<6>[ 1.090876] PPTP driver version 0.8.5
<6>[ 1.095138] hso: drivers/net/usb/hso.c: Option Wireless
<6>[ 1.101610] usbcore: registered new interface driver hso
<6>[ 1.107734] usbcore: registered new interface driver asix
<6>[ 1.113951] usbcore: registered new interface driver ax88179_178a
<6>[ 1.120986] usbcore: registered new interface driver cdc_ether
<6>[ 1.127654] usbcore: registered new interface driver net1080
<6>[ 1.134152] usbcore: registered new interface driver cdc_subset
<6>[ 1.140950] usbcore: registered new interface driver zaurus
<6>[ 1.147379] usbcore: registered new interface driver cdc_ncm
<6>[ 1.153671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<4>[ 1.161153] get ehci0-controller drv_vbus_gpio is fail
<4>[ 1.166762] get ehci0-controller, regulator_io is no nocare
<4>[ 1.173148] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000de29c0, 0x:ffffff80000a6000, irq_no:68
<6>[ 1.186642] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.196722] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
<6>[ 1.206818] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc000483960
<6>[ 1.230024] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
<6>[ 1.237765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.245441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.253472] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.261795] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
<6>[ 1.267785] usb usb1: SerialNumber: sunxi-ehci
<6>[ 1.273801] hub 1-0:1.0: USB hub found
<6>[ 1.277918] hub 1-0:1.0: 1 port detected
<6>[ 1.282658] scene_lock_init name=ehci_standby
<4>[ 1.287413] [ehci0-controller]: sunxi_usb_disable_ehci
<4>[ 1.293214] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000de29c0
<6>[ 1.303659] scene_lock_destroy name=ehci_standby
<6>[ 1.308701] sunxi-ehci 1c1a000.ehci0-controller: remove, state 1
<6>[ 1.315466] usb usb1: USB disconnect, device number 1
<6>[ 1.322419] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
<4>[ 1.329810] get ehci1-controller, regulator_io is no nocare
<4>[ 1.336374] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000de2c30, 0x:ffffff80000ae000, irq_no:6a
<6>[ 1.349967] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.360043] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 1
<6>[ 1.370096] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc000483960
<6>[ 1.390044] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
<6>[ 1.397766] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.405455] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.413484] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.421813] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
<6>[ 1.427803] usb usb1: SerialNumber: sunxi-ehci
<6>[ 1.433792] hub 1-0:1.0: USB hub found
<6>[ 1.437908] hub 1-0:1.0: 1 port detected
<6>[ 1.442649] scene_lock_init name=ehci_standby
<6>[ 1.447885] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<4>[ 1.454976] get ohci0-controller drv_vbus_gpio is fail
<4>[ 1.460694] get ohci0-controller, regulator_io is no nocare
<4>[ 1.466866] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000de24e0
<6>[ 1.477380] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 1.487089] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 2
<6>[ 1.496734] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x626e6b61ff726b6b
<6>[ 1.564073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 1.571687] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.579577] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 1.587635] usb usb2: Manufacturer: Linux 3.10.93 ohci_hcd
<6>[ 1.593731] usb usb2: SerialNumber: sunxi-ohci
<6>[ 1.599543] hub 2-0:1.0: USB hub found
<6>[ 1.603747] hub 2-0:1.0: 1 port detected
<6>[ 1.608307] scene_lock_init name=ohci_standby
<4>[ 1.613226] [ohci0-controller]: sunxi_usb_disable_ohci
<4>[ 1.618837] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000de24e0
<6>[ 1.629363] scene_lock_destroy name=ohci_standby
<6>[ 1.634495] sunxi-ohci 1c1a000.ohci0-controller: remove, state 1
<6>[ 1.641191] usb usb2: USB disconnect, device number 1
<6>[ 1.647560] sunxi-ohci 1c1a000.ohci0-controller: USB bus 2 deregistered
<4>[ 1.655076] get ohci1-controller, regulator_io is no nocare
<3>[ 1.661327] hci: request ohci1-controller gpio:1027
<4>[ 1.666682] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000de2750
<6>[ 1.677251] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 1.686939] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 2
<6>[ 1.696588] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x626e6b61ff726b6b
<6>[ 1.764068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 1.771682] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.779571] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 1.787629] usb usb2: Manufacturer: Linux 3.10.93 ohci_hcd
<6>[ 1.793725] usb usb2: SerialNumber: sunxi-ohci
<6>[ 1.799485] hub 2-0:1.0: USB hub found
<6>[ 1.803683] hub 2-0:1.0: 1 port detected
<6>[ 1.808229] scene_lock_init name=ohci_standby
<6>[ 1.813831] usbcore: registered new interface driver usb-storage
<6>[ 1.820718] usbcore: registered new interface driver ums-alauda
<6>[ 1.827484] usbcore: registered new interface driver ums-cypress
<6>[ 1.834364] usbcore: registered new interface driver ums-datafab
<6>[ 1.841249] usbcore: registered new interface driver ums_eneub6250
<6>[ 1.848313] usbcore: registered new interface driver ums-freecom
<6>[ 1.855189] usbcore: registered new interface driver ums-isd200
<6>[ 1.861967] usbcore: registered new interface driver ums-jumpshot
<6>[ 1.868921] usbcore: registered new interface driver ums-karma
<6>[ 1.875609] usbcore: registered new interface driver ums-onetouch
<6>[ 1.882642] usbcore: registered new interface driver ums-realtek
<6>[ 1.889503] usbcore: registered new interface driver ums-sddr09
<6>[ 1.896294] usbcore: registered new interface driver ums-sddr55
<6>[ 1.903119] usbcore: registered new interface driver ums-usbat
<6>[ 1.910394] usbcore: registered new interface driver usbserial
<6>[ 1.917075] usbcore: registered new interface driver option
<6>[ 1.923469] usbserial: USB Serial support registered for GSM modem (1-port)
<6>[ 1.932520] mousedev: PS/2 mouse device common for all mice
<6>[ 1.939170] usbcore: registered new interface driver xpad
<6>[ 1.945390] usbcore: registered new interface driver usb_acecad
<6>[ 1.952243] usbcore: registered new interface driver aiptek
<6>[ 1.958629] usbcore: registered new interface driver gtco
<6>[ 1.964844] usbcore: registered new interface driver hanwang
<6>[ 1.971344] usbcore: registered new interface driver kbtab
<6>[ 1.977642] usbcore: registered new interface driver wacom
<6>[ 1.985958] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0
<6>[ 1.993675] sunxi-rtc 1f00000.rtc: RTC enabled
<6>[ 1.999278] IR NEC protocol handler initialized
<6>[ 2.004332] IR RC5(x) protocol handler initialized
<6>[ 2.009560] IR RC6 protocol handler initialized
<6>[ 2.014681] IR JVC protocol handler initialized
<6>[ 2.019624] IR Sony protocol handler initialized
<6>[ 2.024827] IR RC5 (streamzap) protocol handler initialized
<6>[ 2.031178] IR SANYO protocol handler initialized
<6>[ 2.036304] IR MCE Keyboard/mouse protocol handler initialized
<4>[ 2.042953] sunxi cedar version 0.1
<4>[ 2.046967] [cedar]: install start!!!
<4>[ 2.051204] ycy the get irq is 90
<4>[ 2.055566] ycy clk_bass_vir 0x18 is ffffff80000c4018, the value:1002201
<4>[ 2.063119] ycy clk_bass_vir 0x13c is ffffff80000c413c, the value:0
<4>[ 2.070181] ycy clk_bass_vir 0x64 is ffffff80000c4064, the value:601800
<4>[ 2.077498] ycy clk_bass_vir 0x2c4 is ffffff80000c42c4, the value:601c00
<4>[ 2.085159] ycy clk_bass_vir 0x100 is ffffff80000c4100, the value:0
<4>[ 2.092236] [cedar]: install end!!!
<6>[ 2.102467] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input0
<6>[ 2.126840] sunxi budget cooling probe start !
<6>[ 2.131824] CPU freq cooling register Success
<6>[ 2.136593] CPU hotplug cooling register Success
<6>[ 2.142163] CPU budget cooling register Success
<6>[ 2.147895] sunxi gpu cooling probe start !
<6>[ 2.152558] CPU gpu cooling register Success
<6>[ 2.157702] device-mapper: uevent: version 1.0.3
<6>[ 2.163321] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
<6>[ 2.172921] Bluetooth: HCI UART driver ver 2.2
<6>[ 2.177773] Bluetooth: HCI H4 protocol initialized
<6>[ 2.183710] Bluetooth: HCI Realtek H5 protocol initialized
<6>[ 2.189701] rtk_btcoex: rtk_uart_coex_init, version: 1.1
<6>[ 2.195710] rtk_btcoex: create workqueue
<6>[ 2.203435] cpuidle: using governor ladder
<6>[ 2.207906] cpuidle: using governor menu
<6>[ 2.213548] sunxi-mmc 1c11000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.43 2015-12-22 14:12) Compiled in Jan 14 2016 at 13:49:21
<6>[ 2.226790] sunxi-mmc 1c11000.sdmmc: regulator prop vmmc,str vcc-emmc
<6>[ 2.233972] sunxi-mmc 1c11000.sdmmc: regulator prop vqmmc,str none
<6>[ 2.240899] sunxi-mmc 1c11000.sdmmc: regulator prop vdmmc,str none
<6>[ 2.247738] sunxi-mmc 1c11000.sdmmc: No vqmmc regulator found
<6>[ 2.254237] sunxi-mmc 1c11000.sdmmc: No vdmmc regulator found
<6>[ 2.261506] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.290024] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.320051] sunxi-mmc 1c11000.sdmmc: base:0xffffff80000c6000 irq:94
<3>[ 2.320862] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
<3>[ 2.321689] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
<6>[ 2.321707] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.324106] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
<3>[ 2.325974] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 8, RTO !!
<3>[ 2.326801] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
<3>[ 2.327626] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
<3>[ 2.328451] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
<3>[ 2.329276] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
<3>[ 2.330104] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
<3>[ 2.330931] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
<3>[ 2.331756] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
<3>[ 2.332582] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
<6>[ 2.332600] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.332952] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.332994] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.333030] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.335428] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.351196] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.362743] mmc0: BKOPS_EN bit is not set
<6>[ 2.497910] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.43 2015-12-22 14:12) Compiled in Jan 14 2016 at 13:49:21
<6>[ 2.511107] sunxi-mmc 1c0f000.sdmmc: ctl-spec-caps 5
<6>[ 2.516547] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str none
<6>[ 2.516951] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 7 width 8 timing LEGACY(SDR12) dt B
<6>[ 2.534909] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str none
<6>[ 2.534917] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS200 dt B
<6>[ 2.534955] mmc0: Check switch ready sunxi_mmc_check_timing_switch_done
<6>[ 2.535281] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 100000000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS200 dt B
<6>[ 2.535352] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 52000000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS200 dt B
<6>[ 2.582899] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc
<6>[ 2.582905] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS(SDR20) dt B
<6>[ 2.582924] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 52000000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS(SDR20) dt B
<6>[ 2.582937] mmc0: Check switch ready sunxi_mmc_check_timing_switch_done
<6>[ 2.620831] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS400 dt B
<6>[ 2.620875] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
<6>[ 2.620879] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
<6>[ 2.644826] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 100000000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS400 dt B
<6>[ 2.656265] mmc0: Check switch ready sunxi_mmc_check_timing_switch_done
<6>[ 2.663710] mmc0: new HS400 MMC card at address 0001
<6>[ 2.663740] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
<6>[ 2.675312] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000ce000 irq:92
<6>[ 2.682742] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.43 2015-12-22 14:12) Compiled in Jan 14 2016 at 13:49:21
<6>[ 2.695924] mmcblk0: mmc0:0001 AGND3R 14.5 GiB
<6>[ 2.695948] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string
<6>[ 2.695952] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string
<6>[ 2.695957] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string
<3>[ 2.695959] get() with no identifier
<3>[ 2.695961] get() with no identifier
<3>[ 2.695962] get() with no identifier
<6>[ 2.695965] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found
<6>[ 2.695969] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found
<6>[ 2.695972] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found
<6>[ 2.753983] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.765147] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
<6>[ 2.765168] mmcblk0boot0: mmc0:0001 AGND3R partition 1 4.00 MiB
<6>[ 2.779313] mmcblk0boot1: mmc0:0001 AGND3R partition 2 4.00 MiB
<6>[ 2.787592] mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 >
<6>[ 2.790031] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.810062] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000d6000 irq:93
<4>[ 2.807124] mmcblk0: p1 size 25815450 extends beyond EOD, truncated
<3>[ 2.822783] sunxi_ss_alg_register()836 - crypto_register_ahash(md5) failed! return -22
<3>[ 2.831730] sunxi_ss_probe()949 - sunxi_ss_alg_register() failed! return -22
<4>[ 2.839583] ss: probe of 1c15000.ce failed with error -22
<6>[ 2.846431] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 2.857132] mmcblk0boot1: unknown partition table
<6>[ 2.864400] mmcblk0boot0: unknown partition table
<3>[ 2.870257] *mmc0 lock timeout*
<6>[ 2.871067] usbcore: registered new interface driver usbhid
<6>[ 2.871069] usbhid: USB HID core driver
<6>[ 2.884650] zram: Created 1 device(s) ...
<6>[ 2.890509] ashmem: initialized
<4>[ 2.901071] adda_com_reg_readl: reg = 0xffffff80000545c0
<4>[ 2.906878] adda_com_reg_writel: val = 0x70, reg = 0xffffff80000545c0
<6>[ 2.918270] sunxi-codec-machine sound.7: codec-aif1 <-> 1c22c00.i2s0-controller mapping ok
<6>[ 2.928168] sunxi-codec-machine sound.7: codec-aif2 <-> bb-dai mapping ok
<6>[ 2.936353] sunxi-codec-machine sound.7: codec-aif2 <-> bb-dai mapping ok
<6>[ 2.944528] sunxi-codec-machine sound.7: codec-aif3 <-> bb-dai mapping ok
<6>[ 2.955553] input: audiocodec sunxi Audio Jack as /devices/soc.0/sound.7/sound/card0/input1
<6>[ 2.967437] sndhdmi sound.8: sndhdmi <-> 1c22800.daudio mapping ok
<6>[ 2.976339] u32 classifier
<6>[ 2.979293] Actions configured
<3>[ 2.980862] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
<3>[ 2.981685] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
<6>[ 2.981703] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
<6>[ 2.984135] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
<3>[ 2.985998] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 8, RTO !!
<3>[ 2.986818] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
<3>[ 2.987635] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
<3>[ 2.988453] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
<3>[ 2.989271] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
<3>[ 2.990091] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
<3>[ 2.990911] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
<3>[ 2.991731] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
<3>[ 2.992548] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
<6>[ 2.992564] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
<3>[ 2.993412] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 1, RTO !!
<6>[ 2.993427] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
<3>[ 2.994474] *mmc2 unlock*
<6>[ 3.112554] Netfilter messages via NETLINK v0.30.
<6>[ 3.117809] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[ 3.125210] ctnetlink v0.93: registering with nfnetlink.
<6>[ 3.133153] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 3.140923] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 3.148594] xt_time: kernel timezone is -0000
<6>[ 3.153552] ipip: IPv4 over IPv4 tunneling driver
<6>[ 3.159778] gre: GRE over IPv4 demultiplexor driver
<6>[ 3.165207] ip_gre: GRE over IPv4 tunneling driver
<6>[ 3.172905] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.179132] arp_tables: (C) 2002 David S. Miller
<6>[ 3.184514] TCP: bic registered
<6>[ 3.187939] TCP: cubic registered
<6>[ 3.191681] TCP: westwood registered
<6>[ 3.195580] TCP: htcp registered
<6>[ 3.199098] Initializing XFRM netlink socket
<6>[ 3.204342] NET: Registered protocol family 10
<6>[ 3.211814] mip6: Mobile IPv6
<6>[ 3.215124] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.221664] sit: IPv6 over IPv4 tunneling driver
<6>[ 3.228104] NET: Registered protocol family 17
<6>[ 3.233188] NET: Registered protocol family 15
<6>[ 3.238597] Bluetooth: RFCOMM TTY layer initialized
<6>[ 3.244072] Bluetooth: RFCOMM socket layer initialized
<6>[ 3.249680] Bluetooth: RFCOMM ver 1.11
<6>[ 3.253934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 3.259731] Bluetooth: BNEP filters: protocol multicast
<6>[ 3.265653] Bluetooth: BNEP socket layer initialized
<6>[ 3.271204] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 3.277689] Bluetooth: HIDP socket layer initialized
<5>[ 3.284051] Registering SWP/SWPB emulation handler
<6>[ 3.289559] sunxi_bootup_extend_init: bootup extend state 1
<6>[ 3.297520] [DISP] boot_disp:0x0
<6>[ 3.301987] [HDMI] power vcc-hdmi-33
<4>[ 3.306366] [HDMI] cec support = 1
<4>[ 3.420702] tv_ac200_init: ac200 disable, skip init
<4>[ 3.426855] usb_serial_number:20080411
<4>[ 3.431506] [sw_udc]: alloc request: ep(0xffffffc000c87a40, ep0, 64), req(0xffffffc06878d3c0)
<4>[ 3.441018] [sw_udc]: sunxi_udc_set_selfpowered_2320: usb device is not active
<4>[ 3.448909] [sw_udc]: sunxi_udc_pullup, is_on = 0
<4>[ 3.454234] [sw_udc]: sunxi_udc_set_pullup_2337: usb device is not active
<6>[ 3.462062] file system registered
<6>[ 3.469388] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 3.477060] android_usb gadget: Number of LUNs=3
<6>[ 3.482241] lun0: LUN: removable file: (no medium)
<6>[ 3.487565] lun1: LUN: removable file: (no medium)
<6>[ 3.493073] lun2: LUN: removable file: (no medium)
<4>[ 3.499470] [sw_udc]: sunxi_udc_set_selfpowered_2320: usb device is not active
<6>[ 3.507416] android_usb gadget: android_usb ready
<4>[ 3.512732] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
<6>[ 3.520564] sunxi-rtc 1f00000.rtc: setting system clock to 2010-01-01 00:00:11 UTC (1262304011)
<6>[ 3.531458] input: sunxi-ths as /devices/virtual/input/input2
<4>[ 3.538180] thermal thermal_zone0: failed to read out thermal zone 0
<6>[ 3.553064] ALSA device list:
<6>[ 3.556312] #0: audiocodec
<6>[ 3.559451] #1: sndhdmi
<6>[ 3.563123] Freeing unused kernel memory: 552K (ffffffc000aef000 - ffffffc000b79000)
<11>[ 3.576275] init: /init.sun50iw1p1.rc: 201: invalid service name 'jide_kernelmsg_dumper'
<11>[ 3.585923] init: could not import file 'init.debug.rc' from 'init.common.rc'
<11>[ 3.858062] init: /dev/hw_random not found
<6>[ 3.863402] keychord: using input dev audiocodec sunxi Audio Jack for fevent
<4>[ 3.901046] [NAND]Failed to insmod nand!!!
<11>[ 3.925337] init: /dev/hw_random not found
<11>[ 3.931886] init: get_disp_policy: for modify configs.init: untracked pid 1539 exited with status 0
<11>[ 3.974496] init: [fswatcherd] 20150814
<11>[ 3.978955] init: [fswatcherd] /dev/block/mmcblk0p9 can be accessed!retry: 0
<6>[ 3.987037] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
<11>[ 3.996095] init: [fswatcherd] No crash since last boot!
<14>[ 3.996255] fs_mgr: __mount(source=/dev/block/by-name/system,target=/system,type=ext4)=0
<4>[ 3.997226] EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
<11>[ 4.019162] init: [fswatcherd] get_fs_device mmcblk0p1
<6>[ 4.019827] EXT4-fs (mmcblk0p16): recovery complete
<6>[ 4.020420] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<14>[ 4.020463] fs_mgr: check_fs(): mount(/dev/block/by-name/cache,/cache,ext4)=0
<4>[ 4.050031] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=4
<14>[ 4.057050] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
<14>[ 4.095453] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[ 4.100554] e2fsck: /dev/block/by-name/cache: clean, 21/49152 files, 6386/196608 blocks
<4>[ 4.110365] EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
<6>[ 4.122809] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
<14>[ 4.133904] fs_mgr: __mount(source=/dev/block/by-name/cache,target=/cache,type=ext4)=0
<14>[ 4.142876] fs_mgr: check_fs(): mount(/dev/block/by-name/alog,/logger,ext4)=-1
<11>[ 4.151042] fs_mgr: begin to format ext4 buffer : /dev/block/mmcblk0p12fs_mgr: finish format to ext4: /dev/block/mmcblk0p12fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/alog
<14>[ 4.295752] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[ 4.300848] e2fsck: /dev/block/by-name/alog: clean, 11/4096 files, 1294/16384 blocks
<4>[ 4.310344] EXT4-fs (mmcblk0p12): Ignoring removed nomblk_io_submit option
<6>[ 4.323221] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
<14>[ 4.334307] fs_mgr: __mount(source=/dev/block/by-name/alog,target=/logger,type=ext4)=0
<4>[ 4.344395] EXT4-fs (mmcblk0p1): Ignoring removed nomblk_io_submit option
<6>[ 4.553782] EXT4-fs (mmcblk0p1): recovery complete
<6>[ 4.559724] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<4>[ 4.571427]
<4>[ 4.571427]
<4>[ 4.571427] rmmod_host_driver
<4>[ 4.571427]
<3>[ 4.579507] hci: ERR: sunxi_ehci is disable, can not disable again
<14>[ 4.586570] fs_mgr: check_fs(): mount(/dev/block/by-name/UDISK,/data,ext4)=0
<3>[ 4.594416] hci: ERR: sunxi_ohci is disable, can not disable again
<4>[ 4.601313]
<4>[ 4.601313]
<4>[ 4.601313] insmod_host_driver
<4>[ 4.601313]
<4>[ 4.609501] [ehci0-controller]: sunxi_usb_enable_ehci
<4>[ 4.615256] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000de29c0, 0x:ffffff80000a6000, irq_no:68
<6>[ 4.628795] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 4.638923] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 3
<14>[ 4.638878] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/UDISK
<6>[ 4.656949] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0007a88dc
<14>[ 4.676136] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 4.680050] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
<6>[ 4.680193] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 4.680199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.680203] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 4.680208] usb usb3: Manufacturer: Linux 3.10.93 ehci_hcd
<6>[ 4.680212] usb usb3: SerialNumber: sunxi-ehci
<6>[ 4.681802] hub 3-0:1.0: USB hub found
<6>[ 4.681828] hub 3-0:1.0: 1 port detected
<6>[ 4.682113] scene_lock_init name=ehci_standby
<4>[ 4.682118] [ohci0-controller]: sunxi_usb_enable_ohci
<4>[ 4.682123] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000de24e0
<6>[ 4.682185] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 4.682206] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 4
<6>[ 4.682273] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0xffffffc0007a88dc
<6>[ 4.744057] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 4.744062] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.744066] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 4.744070] usb usb4: Manufacturer: Linux 3.10.93 ohci_hcd
<6>[ 4.744074] usb usb4: SerialNumber: sunxi-ohci
<6>[ 4.745500] hub 4-0:1.0: USB hub found
<6>[ 4.745532] hub 4-0:1.0: 1 port detected
<6>[ 4.745802] scene_lock_init name=ohci_standby
<4>[ 4.745805] host_chose finished 86!
<14>[ 4.832586] e2fsck: /dev/block/by-name/UDISK: clean, 2220/806256 files, 431536/3218739 blocks
<4>[ 4.843503] EXT4-fs (mmcblk0p1): Ignoring removed nomblk_io_submit option
<6>[ 4.856822] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
<14>[ 4.869369] fs_mgr: __mount(source=/dev/block/by-name/UDISK,target=/data,type=ext4)=0
<4>[ 4.882852] FAT-fs (mmcblk0p13): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<4>[ 4.898559] FAT-fs (mmcblk0p13): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<14>[ 4.909733] fs_mgr: __mount(source=/dev/block/by-name/Reserve0,target=/mnt/Reserve0,type=vfat)=0
<6>[ 4.942548] Adding 163836k swap on /dev/block/zram0. Priority:-1 extents:1 across:163836k SS
<6>[ 4.958661] enter tr_probe
<6>[ 4.961883] exit tr_probe
<4>[ 5.025635] Mali: Set gpu frequency to 552 MHz
<4>[ 5.030702] Mali: Init Mali gpu clocks successfully
<6>[ 5.039716] gpu cooling callback register Success
<4>[ 5.044984] Mali: Mali device driver loaded
<6>[ 5.082707] usbcore: registered new interface driver snd-usb-audio
<6>[ 5.289787] binder: 1623:1623 transaction failed 29189, size 0-0
<6>[ 5.334339] input: sunxi-keyboard as /devices/virtual/input/input3
<6>[ 5.343087] keychord: using input dev sunxi-keyboard for fevent
<4>[ 5.384113] get ctp_para failed, -1
<4>[ 5.388467] get node gsensor failed
<4>[ 5.394245] get sysconfig para erro!
<4>[ 5.402259] get node lightsensor failed
<6>[ 5.405903] Registered IR keymap rc_map_sunxi
<6>[ 5.407135] input: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0/input4
<4>[ 5.420061] get sysconfig para erro!
<6>[ 5.420537] rc0: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0
<6>[ 5.421456] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input5
<6>[ 5.422255] keychord: using input dev MCE IR Keyboard/Mouse (sunxi-rc-recv) for fevent
<38>[ 5.423667] logd.auditd: start
<4>[ 5.436041] gpio_pin_1(360) gpio_is_valid
<4>[ 5.436890] gpio_pin_2(361) gpio_is_valid
<4>[ 5.437514] gpio name is PL8, ret = 0
<4>[ 5.437913] gpio name is PL9, ret = 0
<4>[ 5.438501] gpio_init finish with uesd
<4>[ 5.473688] get node gyroscopesensor failed
<4>[ 5.478289] get sysconfig para erro!
<4>[ 5.482530] get node compasssensor failed
<6>[ 5.486472] usbcore: registered new interface driver uvcvideo
<6>[ 5.486476] USB Video Class driver (1.1.1)
<12>[ 5.497939] KERNEL_INIT_COMPLETE
<3>[ 5.497941] android_usb: already disabled
<4>[ 5.498542] get sysconfig para erro!
<6>[ 5.540127] gpu cooling callback set freq limit 0
<3>[ 5.550144] wakeup gpio set err!get node ctp failed
<4>[ 5.555477] get sysconfig para erro!
<6>[ 5.828935] input: sunxi-ir-uinput as /devices/virtual/input/input6
<6>[ 5.838770] keychord: using input dev sunxi-ir-uinput for fevent
<6>[ 8.118159] warning: `Thread-8' uses 32-bit capabilities (legacy support in use)
<11>[ 9.050856] init: [fswatcherd] fs is mounted!
<12>[ 12.102242] healthd: battery l=0 v=2 t=30.0 h=2 st=2 c=0 chg=au
<12>[ 17.662640] healthd: battery l=0 v=2 t=30.0 h=2 st=2 c=0 chg=au
<6>[ 18.006524] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[ 18.014614] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[ 18.020667] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[ 18.026679] lowmemorykiller: oom_adj 2 => oom_score_adj 117
<6>[ 18.033049] lowmemorykiller: oom_adj 3 => oom_score_adj 176
<6>[ 18.039161] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[ 18.045509] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<6>[ 18.712412] acc_open
<6>[ 18.714828] acc_release
<6>[ 19.342997] libphy: 1c30000.eth: probed
<6>[ 19.349068] sunxi-gmac 1c30000.eth eth0: eth0: PHY ID 00441400 at 0 IRQ poll (1c30000.eth-0:00)
<4>[ 19.537991] RTL871X: module init start
<4>[ 19.542253] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844
<4>[ 19.551454] RTL871X: build time: Jan 14 2016 13:49:29
<4>[ 19.557009] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844
<6>[ 19.564266] sunxi-wlan wlan.32: bus_index: 1
<6>[ 19.572205] sunxi-wlan wlan.32: check wlan wlan_power voltage: 3300000
<6>[ 19.580298] sunxi-wlan wlan.32: check wlan io_regulator voltage: 3300000
<6>[ 19.703394] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
<4>[ 19.704353] RTL871X: module init ret=0
<6>[ 19.721247] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
<6>[ 19.740103] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
<3>[ 19.770985] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
<3>[ 19.778652] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
<6>[ 19.785603] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
<6>[ 19.800425] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
<3>[ 19.814886] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 8, RTO !!
<6>[ 19.822136] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
<6>[ 19.845213] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
<6>[ 19.857410] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
<6>[ 19.869902] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B
<6>[ 19.882635] mmc2: new high speed SDIO card at address 0001
<4>[ 19.951271] RTL871X: rtw_ndev_init(wlan0)
<4>[ 19.966597] RTL871X: rtw_ndev_init(p2p0)
<3>[ 19.982549] *mmc2 lock timeout*
<6>[ 21.726165] IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>[ 21.853037] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[ 22.340247] libphy: 1c30000.eth-0:00 - Link is Up - 100/Full
<6>[ 52.156147] CPU Budget hotplug: cluster0 min:0 max:4
<11>[ 52.161929] init: boost open /sys/block/nandd/queue/read_ahead_kb fail,No such file or directory!
<11>[ 52.172694] init: boost open /sys/block/nando/queue/read_ahead_kb fail,No such file or directory!
<11>[ 52.184019] init: boost open /sys/block/nandd/queue/read_ahead_kb fail,No such file or directory!
<11>[ 52.197718] init: boost open /sys/block/nando/queue/read_ahead_kb fail,No such file or directory!
<4>[ 52.776965] sunxi-bt bt.33: block state already is 1
<6>[ 52.983593] sunxi-bt bt.33: set block: 0
<6>[ 52.988146] sunxi-bt bt.33: check bluetooth bt_power voltage: 3300000
<6>[ 52.995989] sunxi-bt bt.33: check bluetooth io_regulator voltage: 3300000
<11>[ 54.071460] init: [fswatcherd] boot completed, clear last crash message!
<5>[ 54.951497] CPU3: shutdown
<6>[ 54.954488] psci: CPU3 killed.
<12>[ 52.209095] BOOT_COMPLETEinit: unkwon magic init: unkwon magic
<6>[ 55.017330] CPU Budget hotplug: cluster0 min:0 max:4
<4>[ 54.960935] CPU3: Booted secondary processor
<6>[ 54.960935] CPU3: update cpu_power 1968128
<5>[ 57.551477] CPU2: shutdown
<6>[ 57.554457] psci: CPU2 killed.
<4>[ 57.560922] CPU2: Booted secondary processor
<6>[ 57.560922] CPU2: update cpu_power 1968128
<6>[ 60.346166] binder: 5436:5447 refcount change on invalid ref 18
<6>[ 60.439316] binder: 5436:5544 refcount change on invalid ref 18
<6>[ 60.449117] binder: 5436:5544 refcount change on invalid ref 18
<3>[ 60.461678] binder: transaction release 41676 bad handle 18
<5>[ 64.151502] CPU1: shutdown
<6>[ 64.154505] psci: CPU1 killed.
<4>[ 64.160924] CPU1: Booted secondary processor
<6>[ 64.160924] CPU1: update cpu_power 1968128
<12>[ 66.298188] healthd: battery l=0 v=2 t=30.0 h=2 st=2 c=0 chg=au
<5>[ 67.951279] CPU3: shutdown
<6>[ 67.954270] psci: CPU3 killed.
<5>[ 68.351305] CPU2: shutdown
<6>[ 68.354291] psci: CPU2 killed.
<5>[ 68.551217] CPU1: shutdown
<6>[ 68.554193] psci: CPU1 killed.
<4>[ 68.560668] CPU1: Booted secondary processor
<6>[ 68.560668] CPU1: update cpu_power 1968128
<5>[ 71.152187] CPU1: shutdown
<6>[ 71.155218] psci: CPU1 killed.
<4>[ 71.161262] CPU1: Booted secondary processor
<6>[ 71.161262] CPU1: update cpu_power 1968128
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.