Myhome vents things

ventilation.things

// ПВУ neoclima
Bridge modbus:tcp:neoclima "PVU" [ host="***.***.***.***", port="***", id=1] {
    // регістри керування вентиляторами, байпасом та нагрівачем
    Bridge poller speed [ start=0, length=12, refresh=1000, type="holding" ] {

        Thing data heater "PVU SW HEATER" [ readStart="1", readValueType="int16", writeStart="1", writeValueType="int16", writeType="holding" ]

        Thing data bypass_opening "PVU BYPASS OPENING TEMP" [ readStart="2", readValueType="int16", writeStart="2", writeValueType="int16", writeType="holding" ]
        Thing data bypass_range "PVU BYPASS OPENING RANGE" [ readStart="3", readValueType="int16", writeStart="3", writeValueType="int16", writeType="holding" ]

        Thing data onoff "PVU SW ONOFF" [ readStart="9", readValueType="int16", writeStart="9", writeValueType="int16", writeType="holding" ]

        Thing data supply "PVU SPEED SUPPLY" [ readStart="10", readValueType="int16", writeStart="10", writeValueType="int16", writeType="holding" ]
        Thing data exhaust "PVU SPEED EXCHANGE" [ readStart="11", readValueType="int16", writeStart="11", writeValueType="int16", writeType="holding" ]
    }
    
    // регістри датчиків температури ПВУ
    Bridge poller temp [ start=12, length=4, refresh=1000, type="holding" ] {
        Thing data exchange "PVU TEMP EXCHANGE" [ readStart="12", readValueType="int16" ]
        Thing data input "PVU TEMP INPUT" [ readStart="13", readValueType="int16" ]
        Thing data output "PVU TEMP OUTPUT" [ readStart="14", readValueType="int16" ]
        Thing data exhaust "PVU TEMP EXHAUST" [ readStart="15", readValueType="int16"]
    }
    
    // регістр цільової температури
    Bridge poller setpoint [ start=27, length=1, refresh=1000, type="holding" ] {
        Thing data temp "PVU SETPOINT TEMP" [ readStart="27", readValueType="int16", writeStart="27", writeValueType="int16", writeType="holding" ]
    }
}

// адаптер 0-10в регулювання нагрівача повітря
Bridge modbus:tcp:N4DAC02_1 [ host="***.***.***.***", port="***", id=2] {
    Bridge poller holding [ start=1, length=1, refresh=1000, type="holding" ] {
        Thing data voltage [ readStart="1", readValueType="uint16", writeStart="1", writeValueType="int16", writeType="holding" ]
    }
}

// двоканальний адаптер ds1820 для температур з ГТО та після нагрівача
Bridge modbus:tcp:ds1820_1 [ host="192.168.10.71", port="8899", id=3] {
    Bridge poller temp [ start=512, length=2, refresh=5000, type="holding" ] {
        Thing data t1 [ readStart="512", readValueType="uint16" ]
        Thing data t2 [ readStart="513", readValueType="uint16" ]
    }
}

// Реле Shelly pm2.5 для керування засувкою
Thing shelly:shelly25-relay:40f520019ba7 "Shelly PM2.5 #40f520019ba7" @ "Shelly" [deviceIp="***.***.***.***", userId="****", password="****" ]