Skip to content

Instantly share code, notes, and snippets.

@stblr
Created March 1, 2019 11:22
Show Gist options
  • Save stblr/3deae32c33fba2ab2ddde1ca57c6a846 to your computer and use it in GitHub Desktop.
Save stblr/3deae32c33fba2ab2ddde1ca57c6a846 to your computer and use it in GitHub Desktop.
--- TLP 1.1.907 --------------------------------------------
+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
TLP_DEFAULT_MODE=AC
TLP_PERSISTENT_DEFAULT=0
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
CPU_HWP_ON_AC=balance_performance
CPU_HWP_ON_BAT=balance_power
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=power
DISK_DEVICES="nvme0n1 sda"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
AHCI_RUNTIME_PM_TIMEOUT=15
RADEON_POWER_PROFILE_ON_AC=default
RADEON_POWER_PROFILE_ON_BAT=default
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=off
WIFI_PWR_ON_BAT=on
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_AC=0
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
USB_AUTOSUSPEND=1
USB_BLACKLIST_BTUSB=0
USB_BLACKLIST_PHONE=0
USB_BLACKLIST_PRINTER=1
USB_BLACKLIST_WWAN=0
RESTORE_DEVICE_STATE_ON_STARTUP=0
NATACPI_ENABLE=1
TPACPI_ENABLE=1
TPSMAPI_ENABLE=1
DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi"
DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi"
+++ System Info
System = Dell Inc. Latitude E7470
BIOS = 1.18.5
Release = "Arch Linux"
Kernel = 4.20.12-arch1-1-ARCH #1 SMP PREEMPT Sat Feb 23 15:11:34 UTC 2019 x86_64
/proc/cmdline = BOOT_IMAGE=/vmlinuz-linux root=UUID=5772c8c8-abde-44c0-b61a-dccfe01de278 rw cryptdevice=/dev/nvme0n1p3:cryptroot root=/dev/mapper/cryptroot quiet
Init system = systemd
Boot mode = UEFI
+++ TLP Status
State = enabled
RDW state = enabled
Last run = 12:13:57, 49 sec(s) ago
Mode = AC
Power source = AC
+++ Processor
CPU model = Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz
/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = intel_pstate
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = performance powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 400000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 3400000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference = balance_performance
/sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power
/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = intel_pstate
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = powersave
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = performance powersave
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 400000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 3400000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference = balance_performance
/sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power
/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver = intel_pstate
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = powersave
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_governors = performance powersave
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq = 400000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq = 3400000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/energy_performance_preference = balance_performance
/sys/devices/system/cpu/cpu2/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power
/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver = intel_pstate
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = powersave
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_governors = performance powersave
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq = 400000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq = 3400000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/energy_performance_preference = balance_performance
/sys/devices/system/cpu/cpu3/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power
/sys/devices/system/cpu/intel_pstate/min_perf_pct = 11 [%]
/sys/devices/system/cpu/intel_pstate/max_perf_pct = 100 [%]
/sys/devices/system/cpu/intel_pstate/no_turbo = 0
/sys/devices/system/cpu/intel_pstate/turbo_pct = 27 [%]
/sys/devices/system/cpu/intel_pstate/num_pstates = 31
x86_energy_perf_policy.cpu0 = performance
x86_energy_perf_policy.cpu1 = performance
x86_energy_perf_policy.cpu2 = performance
x86_energy_perf_policy.cpu3 = performance
/sys/module/workqueue/parameters/power_efficient = Y
/proc/sys/kernel/nmi_watchdog = 0
+++ Undervolting
PHC kernel not available.
+++ Temperatures
CPU temp = 37 [°C]
Fan speed (fan1) = 0 [/min]
+++ File System
/proc/sys/vm/laptop_mode = 0
/proc/sys/vm/dirty_writeback_centisecs = 1500
/proc/sys/vm/dirty_expire_centisecs = 1500
/proc/sys/vm/dirty_ratio = 20
/proc/sys/vm/dirty_background_ratio = 10
+++ Storage Devices
Devices = nvme0n1 sda
/dev/nvme0n1:
Type = NVMe
Model = THNSN5512GPUK TOSHIBA
Firmware = 5KHA4101
Scheduler = [none] mq-deadline kyber bfq (multiqueue)
Runtime PM: control = auto, autosuspend_delay_ms = (not available)
/dev/sda: not present.
+++ AHCI Link Power Management (ALPM)
/sys/class/scsi_host/host0/link_power_management_policy = med_power_with_dipm
/sys/class/scsi_host/host1/link_power_management_policy = med_power_with_dipm
+++ AHCI Host Controller Runtime Power Management
/sys/bus/pci/devices/0000:00:17.0/ata1/power/control = on
/sys/bus/pci/devices/0000:00:17.0/ata2/power/control = on
+++ Intel Graphics
/sys/module/i915/parameters/enable_dc = -1 (use per-chip default)
/sys/module/i915/parameters/enable_fbc = 1 (enabled)
/sys/module/i915/parameters/enable_psr = 0 (disabled)
/sys/module/i915/parameters/modeset = -1 (use per-chip default)
/sys/class/drm/card0/gt_min_freq_mhz = 300 [MHz]
/sys/class/drm/card0/gt_max_freq_mhz = 1050 [MHz]
/sys/class/drm/card0/gt_boost_freq_mhz = 1050 [MHz]
/sys/kernel/debug/dri/0/i915_ring_freq_table: 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 [MHz]
+++ Wireless
bluetooth = on
wifi = on
wwan = none (no device)
hci0(btusb) : bluetooth, not connected
wlp1s0(iwlwifi) : wifi, connected, power management = off
+++ Audio
/sys/module/snd_hda_intel/parameters/power_save = 0
/sys/module/snd_hda_intel/parameters/power_save_controller = N
+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
+++ Runtime Power Management
Device blacklist = (not configured)
Driver blacklist = amdgpu mei_me nouveau nvidia pcieport radeon (default)
/sys/bus/pci/devices/0000:00:00.0/power/control = on (0x060000, Host bridge, skl_uncore)
/sys/bus/pci/devices/0000:00:02.0/power/control = on (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:04.0/power/control = on (0x118000, Signal processing controller, proc_thermal)
/sys/bus/pci/devices/0000:00:14.0/power/control = on (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:00:14.2/power/control = on (0x118000, Signal processing controller, intel_pch_thermal)
/sys/bus/pci/devices/0000:00:16.0/power/control = auto (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:16.3/power/control = on (0x070002, Serial controller, serial)
/sys/bus/pci/devices/0000:00:17.0/power/control = on (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1d.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1d.2/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1f.0/power/control = on (0x060100, ISA bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.2/power/control = on (0x058000, Memory controller, no driver)
/sys/bus/pci/devices/0000:00:1f.3/power/control = on (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1f.4/power/control = on (0x0c0500, SMBus, i801_smbus)
/sys/bus/pci/devices/0000:00:1f.6/power/control = on (0x020000, Ethernet controller, e1000e)
/sys/bus/pci/devices/0000:01:00.0/power/control = on (0x028000, Network controller, iwlwifi)
/sys/bus/pci/devices/0000:02:00.0/power/control = on (0x010802, Non-Volatile memory controller, nvme)
/sys/bus/pci/devices/0000:03:00.0/power/control = on (0xff0000, Unassigned class [ff00], rtsx_pci)
+++ USB
Autosuspend = enabled
Device whitelist = (not configured)
Device blacklist = (not configured)
Bluetooth blacklist = disabled
Phone blacklist = disabled
WWAN blacklist = disabled
Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub)
Bus 001 Device 004 ID 8087:0a2b control = auto, autosuspend_delay_ms = 2000 -- Intel Corp. (btusb)
Bus 001 Device 003 ID 0a5c:5834 control = auto, autosuspend_delay_ms = 2000 -- Broadcom Corp. (no driver)
Bus 001 Device 002 ID 0bda:5686 control = auto, autosuspend_delay_ms = 2000 -- Realtek Semiconductor Corp. (uvcvideo)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
+++ Battery Features
natacpi = inactive (no kernel support)
tpacpi-bat = inactive (laptop not supported)
tp-smapi = inactive (laptop not supported)
+++ Battery Status
/sys/class/power_supply/BAT0/manufacturer = Samsung SDI
/sys/class/power_supply/BAT0/model_name = DELL 1W2Y26A
/sys/class/power_supply/BAT0/cycle_count = (not supported)
/sys/class/power_supply/BAT0/charge_full_design = 7236 [mAh]
/sys/class/power_supply/BAT0/charge_full = 6724 [mAh]
/sys/class/power_supply/BAT0/charge_now = 5992 [mAh]
/sys/class/power_supply/BAT0/current_now = 1797 [mA]
/sys/class/power_supply/BAT0/status = Charging
Charge = 89.1 [%]
Capacity = 92.9 [%]
+++ Recommendations
* Install smartmontools for disk drive health info\n
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment