vidia

# I had a bit of trouble getting my unifi controller (hosted offsite) to use a proxy/letsencrypt. So here are the fruits of my labor. 
# The unifi default port is 8443 running on localhost. 

# License: CC0 (Public Domain)

server {
        # SSL configuration
        #
        listen 443 ssl default_server;
        listen [::]:443 ssl default_server;

matthewbednarski

[{
    "Note": "The first two digits (ranging from 10–43) correspond to the province, while the last two digits correspond either to the city/delivery zone (range 01–50) or to the district/delivery zone (range 51–99). Afghanistan Postal code lookup",
    "Country": "Afghanistan",
    "ISO": "AF",
    "Format": "NNNN",
    "Regex": "^\\d{4}$"
}, {
    "Note": "With Finland, first two numbers are 22.",
    "Country": "Åland Islands",
    "ISO": "AX",
    "Format": "NNNNN",
    "Regex": "^\\d{5}$"
}, {
    "Note": "Introduced in 2006, gradually implemented throughout 2007.",
    "Country": "Albania",
    "ISO": "AL",
    "Format": "NNNN",
    "Regex": "^\\d{4}$"
}, {
    "Note": "First two as in ISO 3166-2:DZ",
    "Country": "Algeria",
    "ISO": "DZ",
    "Format": "NNNNN",
    "Regex": "^\\d{5}$"
}, {
    "Note": "U.S. ZIP codes (range 96799)",
    "Country": "American Samoa",
    "ISO": "AS",
    "Format": "NNNNN (optionally NNNNN-NNNN or NNNNN-NNNNNN)",
    "Regex": "^\\d{5}(-{1}\\d{4,6})$"
}, {
    "Note":

kdorff

# Reads analog data using an ads1115. Three moisture sensors and a battery sensor.
# Goes to sleep for an hour at a time.
# Uses a helper input_boolean to keep it from going to sleep, in case you want to update it.

esphome:
  name: moisture-1
  platform: ESP32
  board: esp32dev
  on_boot:
    then:

hagenburger

// Released under MIT license: http://www.opensource.org/licenses/mit-license.php

$('[placeholder]').focus(function() {
  var input = $(this);
  if (input.val() == input.attr('placeholder')) {
    input.val('');
    input.removeClass('placeholder');
  }
}).blur(function() {
  var input = $(this);

1lann

2024 UPDATE

This is not necessary anymore on newer versions of OpenWrt. When you flash a sysupgrade firmware on newer versions of OpenWrt via the web interface it will provide you full access to the flash.

Getting more space on UniFi AC Lite/LRs on OpenWrt

If you've used OpenWrt on UniFi AC Lite/LRs, you may know that the overlayfs only provides 3.6 MB of space. If you think about it, that's kinda weird, because all the hardware docs say that the access point has 16 MB of flash, so where did all the other 12.4 MBs go? Surely they're not all being taken up by the OS.

MaxymVlasov

# How to install:
# pre-commit install --install-hooks && pre-commit install --install-hooks -t commit-msg

# How temporary skip one of hooks: https://pre-commit.com/#temporarily-disabling-hooks


repos:
#######
# ALL #
#######

obscurerichard

slow

This bash script offers quick shortcuts to simulate slower network connections. It is useful when you need to simulate a wireless network on a Linux network server, especially when you are using a virtual machine guest on your local machine or in the cloud.

slow 3G                   # Slow network on default eth0 down to 3G wireless speeds
slow reset                # Reset connection for default eth0 to normal
slow vsat --latency=500ms # Simulate satellite internet  with a high latency
slow dsl -b 1mbps         # Simulate DSL with a slower speed than the default

slow modem-56k -d eth0 # Simulate a 56k modem on the eth1 device. eth0 is unchanged.

fasiha

Introduction

I’m not very familiar with the aviation jargon (see FAA’s ADS-B FAQ), but ADS-B is a next-gen system where aircraft are equipped with transponders that periodically broadcast their own positions and receive the reports from both other aircraft (direct air-to-air) as well as air-traffic control (ATC) ground transmitters.

There are two separate ADS-B radio bands: the commercial aviation (CA) is at 1090 MHz while the general aviation (GA) is at 978 MHz. If I can be permitted a gross generalization—the former corresponds to big commercial jets and the latter to small private aircraft.

Because ADS-B is designed to democratize airspace situational awareness (in contrast to the older setup, like from films, where a central air-traffic controller is coordinating all these aircraft that can’t see each other), we can buy cheap RF receivers to pick up and decode the messages being broadcast by aircraft and ground towers to get our own picture of the

fatihyildizhan

Docker 23 + Traefik v2.9.10 and v1.7 + Let's Encrypt + Github Registry V2 ghcr.io + Updated on 12 April 2023

Content:
- Ubuntu 22.04
- Docker Engine 23.0.3
- Docker Compose 2.17.2
- Traefik v1.7.18 with dnsChallenge
- Traefik v2.9.9 with httpChallenge
--
- Github Registry V2 ghcr.io

cirrusUK

# ░░░░░░ ░░░░░░  ░░   ░░  ░░░░░░ ░░░░░░  ░░   ░░░░░░░░ ░░░░░░  ░░   ░░  ░░░░░ ░░░░░░
# ███╗   ██╗███████╗██╗    ██╗███████╗██████╗ ███████╗██╗   ██╗████████╗███████╗██████╗ 
# ████╗  ██║██╔════╝██║    ██║██╔════╝██╔══██╗██╔════╝██║   ██║╚══██╔══╝██╔════╝██╔══██╗
# ██╔██╗ ██║█████╗  ██║ █╗ ██║███████╗██████╔╝█████╗  ██║   ██║   ██║   █████╗  ██████╔╝
# ██║╚██╗██║██╔══╝  ██║███╗██║╚════██║██╔══██╗██╔══╝  ██║   ██║   ██║   ██╔══╝  ██╔══██╗
# ██║ ╚████║███████╗╚███╔███╔╝███████║██████╔╝███████╗╚██████╔╝   ██║   ███████╗██║  ██║
# ╚═╝  ╚═══╝╚══════╝ ╚══╝╚══╝ ╚══════╝╚═════╝ ╚══════╝ ╚═════╝    ╚═╝   ╚══════╝╚═╝  ╚═╝
# ░░░░░░ ░░░░░░  ░░   ░░  ░░░░░░ ░░░░░░  ░░   ░░░░░░░░ ░░░░░░  ░░   ░░  ░░░░░ ░░░░░░
#  ▓▓▓▓▓▓▓▓▓▓
# ░▓ author ▓ cirrus <cirrus@archlinux.info>