Skip to content

Instantly share code, notes, and snippets.

@steveAbratt

steveAbratt/gist:c2315f60f3bd48bed69fff73f26fa35d

Created January 19, 2017 17:41
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save steveAbratt/c2315f60f3bd48bed69fff73f26fa35d to your computer and use it in GitHub Desktop.
Save steveAbratt/c2315f60f3bd48bed69fff73f26fa35d to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
/**
* Copyright 2016 David Lomas (codersaur)
*
* Name: Fibaro Dimmer 2 (FGD-212)
*
* Author: David Lomas (codersaur) modified by steve bratt to fix android bug
*
* Date: 2016-10-11
*
* Version: 1.01
*
* Description:
* - This device handler is written specifically for the Fibaro Dimmer 2 (FGD-212).
* - It extends hajar97's original device handler to suport Nightmode and fixes a number of issues.
* - Nightmode function:
* Nightmode forces the dimmer to switch on at a specific level (e.g. low-level during the night).
* Nightmode can be enabled/disabled manually using the new Nightmode tile, and/or scheduled from the device settings.
* The 'Force Nightmode' option will cause the dimmer level will be adjusted immediately when Nightmode is enabled/disabled.
*
* Fibaro Dimmer 2 (FGD-212) physical device notes:
* - The auto-calibration feature will sometimes set parameter 1 too high. Use GetConfig to find out what values
* have been set by auto-calibration and adjust as necessary.
* - Sending level 0, will switch the dimmer off and does NOT change the level.
*
* Version History:
*
* 2016-10-11: v1.01
* - Added Nightmode functionality.
* - dimmerEvents(): Fixed MeterGet requests after a switch or level state change.
* - on(), off(), setLevel(): Delayed switchMultilevelGet() requests by 8s as early requests generate erroneous
* data. The dimmer will send a correct report once it has completed the request anyway (which is usually sooner than 8s).
* - zwaveEvent(_MeterReport_): Removed rounding of power values. Also, Energy and power values are stored
* as dispEnergy and dispPower to work-around UI formatting issue.
* - Settings/Preferences: Fixed param24/25/27 to allow combination of options.
* - Simplified fingerprint.
*
* 2016-10-05: v1.00
* - Initial version based on device handler by hajar97.
* - Tiles: Added GetConfig button to retreive the current device settings (which are displayed in the debug log).
*
* To Do:
* - Display load errors, e.g. burnt out bulb warnings.
* - Settings/Preferences: Fix Association Groups (atm, it just puts the controller into the relevent group).
* - Update the device settings in ST UI when configuration reports are received.
* [On Hold: This is not currently possible due to ST platform limitations. Device preferences are read-only!]
*
* License:
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
**/
metadata {
definition (name: "Fibaro Dimmer 2", namespace: "codersaur", author: "David Lomas") {
capability "Actuator"
capability "Switch"
capability "Switch Level"
capability "Sensor"
capability "Power Meter"
capability "Energy Meter"
capability "Polling"
capability "Refresh"
capability "Configuration"
command "reset"
command "configureAfterSecure"
command "changeSingleParamAfterSecure"
command "getConfigReport"
command "enableNightmode"
command "disableNightmode"
command "toggleNightmode"
command "test"
// Standard (Capability) Attributes:
attribute "switch", "string"
attribute "level", "number"
attribute "power", "number"
attribute "energy", "number"
// Custom Attributes:
attribute "scene", "number"
attribute "nightmode", "string"
attribute "lastReset", "string" // Time that ad hoc reporting was reset.
// Display Attributes:
// These are only required because the UI lacks number formatting and strips leading zeros.
attribute "dispPower", "string"
attribute "dispEnergy", "string"
// Fingerprint
//fingerprint deviceId: "0x1001", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x26, 0x5A, 0x59, 0x85, 0x73, 0x98, 0x7A, 0x56, 0x70, 0x31, 0x32, 0x8E, 0x60, 0x75, 0x71, 0x27, 0x22, 0xEF, 0x2B"
fingerprint deviceId: "0x1001", inClusters: "0x5E, 0x20, 0x86, 0x26, 0x85, 0x59, 0x8E, 0x32, 0x31, 0x71"
}
// Simulator Metadata
simulator {
status "on": "command: 2003, payload: FF"
status "off": "command: 2003, payload: 00"
status "09%": "command: 2003, payload: 09"
status "10%": "command: 2003, payload: 0A"
status "33%": "command: 2003, payload: 21"
status "66%": "command: 2003, payload: 42"
status "99%": "command: 2003, payload: 63"
for (int i = 0; i <= 10000; i += 1000) {
status "power ${i} W": new physicalgraph.zwave.Zwave().meterV3.meterReport(
scaledMeterValue: i, precision: 3, meterType: 4, scale: 2, size: 4).incomingMessage()
}
for (int i = 0; i <= 100; i += 10) {
status "energy ${i} kWh": new physicalgraph.zwave.Zwave().meterV3.meterReport(
scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
}
["FF", "00", "09", "0A", "21", "42", "63"].each { val ->
reply "2001$val,delay 100,2602": "command: 2603, payload: $val"
}
}
// Tile Definitions:
tiles(scale: 2) {
// Multi Tile:
multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
}
tileAttribute ("device.level", key: "SLIDER_CONTROL") {
attributeState "level", action:"switch level.setLevel"
}
}
// Instantaneous Values:
valueTile("instMode", "device.dispPower", decoration: "flat", width: 2, height: 1) {
state "default", label:'Now:', action:"refresh.refresh", icon: "https://raw.githubusercontent.com/codersaur/SmartThings/master/icons/tile_2x1_refresh.png"
}
valueTile("power", "device.dispPower", decoration: "flat", width: 2, height: 1) {
state "default", label:'${currentValue}', icon: "https://raw.githubusercontent.com/codersaur/SmartThings/master/icons/tile_2x1_top_bottom_2.png"
}
// Ad Hoc Energy Stats:
valueTile("lastReset", "device.lastReset", decoration: "flat", width: 2, height: 1) {
state "default", label:'Since: ${currentValue}', action:"reset", icon: "https://raw.githubusercontent.com/codersaur/SmartThings/master/icons/tile_2x1_stopwatch_reset.png"
}
valueTile("energy", "device.dispEnergy", width: 2, height: 1) {
state "default", label:'${currentValue}', icon: "https://raw.githubusercontent.com/codersaur/SmartThings/master/icons/tile_2x1_top_bottom_2.png"
}
// Other Tiles:
standardTile("nightmode", "device.nightmode", decoration: "flat", width: 2, height: 2) {
state "default", label:'${currentValue}', action:"toggleNightmode", icon:"st.Weather.weather4"
}
standardTile("configureAfterSecure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "configure", label:'', action:"configureAfterSecure", icon:"st.secondary.configure"
}
standardTile("getConfig", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "default", label:'Get Config', action:"getConfigReport"
}
standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
}
standardTile("test", "device.power", decoration: "flat", width: 2, height: 2) {
state "default", label:'Test', action:"test"
}
// Tile Layouts:
main(["switch","power","energy"])
details(["switch","instMode","power","nightmode","lastReset","energy","configureAfterSecure","getConfig","refresh"])
}
preferences {
section { // NIGHTMODE:
def paragraph = "NIGHTMODE:\n\nNightmode forces the dimmer to switch on at a specific level (e.g. low-level during the night).\n" +
"Nightmode can be enabled/disabled manually using the new Nightmode tile, or scheduled below.\n" +
"When nightmode is disabled, the dimmer's original settings are restored."
input name: "configNightmodeLevel", type: "number", range: "1..99", required: true,
title: paragraph + "\n\n" +
"1. Nightmode Level: The dimmer will always switch on at this level during nightmode."
input name: "configNightmodeForce", type: "boolean", required: true,
title: "2. Force Nightmode: If the dimmer is on when nightmode is enabled, the Nightmode Level is applied immediately " +
"(otherwise it's only applied next time the dimmer is switched on)."
input name: "configNightmodeStartTime", type: "time", required: false,
title: "Nightmode Start Time: Nightmode will start every day at this time."
input name: "configNightmodeStopTime", type: "time", required: false,
title: "Nightmode Stop Time: Nightmode will stop every day at this time."
}
section { // GENERAL:
// Debug Mode:
input name: "configDebugMode", type: "boolean", title: "GENERAL:\n\nEnable debug logging?", required: false
}
section { // DEVICE PARAMETERS:
def paragraph = "DEVICE PARAMETERS:\n\nGROUP 0 - The Dimmer 2 behavior - Basic functionalities"
input name: "param1", type: "number", range: "1..98", required: true,
title: paragraph + "\n\n" +
"1. Minimum brightness level. " +
"This parameter is set automatically during the calibration process. " +
"The parameter can be changed manually after the calibration.\n" +
"Available settings: 1-98 - percentage level of brightness.\n" +
"Default value: 1."
input name: "param2", type: "number", range: "2..99", required: true,
title: "2. Maximum brightness level. " +
"This parameter is set automatically during the calibration process. " +
"The parameter can be changed manually after the calibration.\n" +
"Available settings: 2-99 - percentage level of brightness.\n" +
"Default value: 99."
input name: "param3", type: "number", range: "1..99", required: true,
title: "3. Incandescence level of dimmable compact fluorescent lamps. " +
"Virtual value set as a percentage level between parameters MIN (1%) and MAX (99%). " +
"The Dimmer 2 will set to this value after first switch on. " +
"It is required for warming up and switching dimmable compact fluorescent lamps and certain types of light sources.\n" +
"Available settings: 1-99 - percentage level of brightness.\n" +
"Default value: 1."
input name: "param4", type: "number", range: "0..255", required: true,
title: "4. Incandescence time of dimmable compact fluorescent lamps. " +
"This parameter determines the time required for switching compact fluorescent lamps and certain types of light sources. " +
"Setting this parameter to 0 will disable the incandescence functionality.\n" +
"Available settings: 0-255 (0-25.5s).\n" +
"Default value: 0."
input name: "param5", type: "number", range: "1..99", required: true,
title: "5. Automatic control - dimming step size. " +
"This parameter defines the percentage value of dimming step during the automatic control.\n" +
"Available settings: 1-99 - dimming step percentage value.\n" +
"Default value: 1."
input name: "param6", type: "number", range: "0..255", required: true,
title: "6. Automatic control - time of a dimming step. " +
"This parameter defines the time of single dimming step set in parameter 5 during the automatic control.\n" +
"Available settings: 0-255 (0-2.55s, in 10ms steps).\n" +
"Default value: 1."
input name: "param7", type: "number", range: "1..99", required: true,
title: "7. Manual control - dimming step size. " +
"This parameter defines the percentage value of dimming step during the manual control.\n" +
"Available settings: 1-99 - dimming step percentage value.\n" +
"Default value: 1."
input name: "param8", type: "number", range: "0..255", required: true,
title: "8. Manual control - time of a dimming step. " +
"This parameter defines the time of single dimming step set in parameter 7 during the manual control.\n" +
"Available settings: 0-255 (0-2.55s, in 10ms steps).\n" +
"Default value: 5."
input name: "param9", type: "number", range: "0..1", required: true,
title: "9. State of the device after a power failure. " +
"The Dimmer 2 will return to the last state before power failure.\n" +
"Available settings:\n" +
"0 = the Dimmer 2 does not save the state before a power failure, it returns to �off� position,\n" +
"1 = the Dimmer 2 restores its state before power failure.\n" +
"Default value: 1."
input name: "param10", type: "number", range: "0..32767", required: true,
title: "10. Timer functionality (auto - off). " +
"This parameter allows to automatically switch off the device after specified time from switching on the light source. " +
"It may be useful when the Dimmer 2 is installed in the stairway.\n" +
"Available settings: 0 - Function disabled,\n1-32767 - time to turn off measured in seconds (1s-9.1h).\n" +
"Default value: 0."
input name: "param11", type: "enum", required: true,
options: ["0" : "0",
"1" : "1",
"2" : "2",
"255" : "255"],
title: "11. ALL ON/ALL OFF function. " +
"Parameter allows for activation/deactivation of Z-Wave commands enabling/disabling all devices located in direct range of the main controller.\n" +
"Available settings:\n" +
"0 = All ON not active, All OFF not active,\n" +
"1 = All ON not active, All OFF active,\n" +
"2 = All ON active, All OFF not active,\n" +
"255 = All ON active, All OFF active.\n" +
"Default value: 255."
input name: "param13", type: "number", range: "0..2", required: true,
title: "13. Force auto-calibration. " +
"Changing value of this parameter will force the calibration process. " +
"During the calibration parameter is set to 1 or 2 and switched to 0 upon completion.\n" +
"Available settings:\n" +
"0 = readout,\n" +
"1 = force auto-calibration of the load without FIBARO Bypass 2,\n" +
"2 = force auto-calibration of the load with FIBARO Bypass 2.\n" +
"Default value: 0."
input name: "param15", type: "number", range: "0..99", required: true,
title: "15. Burnt out bulb detection. " +
"Function based on the sudden power variation of a specific value, interpreted as a LOAD ERROR.\n" +
"Available settings:\n0 - function disabled,\n" +
"1-99 - percentage value of power variation, compared to standard power consumption, measured during the calibration procedure (to be interpreted as load error/burnt out bulb).\n" +
"Default value: 30."
input name: "param16", type: "number", range: "0..255", required: true,
title: "16. Time delay of a burnt out bulb (parameter 15) or overload (parameter 39) detection. " +
"Time of delay (in seconds) for power variation detection, interpreted as a LOAD ERROR or OVERLOAD detection (too much power connected to the Dimmer 2).\n" +
"Available settings:\n0 - detection of a burnt out bulb disabled,\n1-255 - delay time in seconds.\n" +
"Default value: 5."
input name: "param19", type: "number", range: "0..99", required: true,
title: "19. Forced switch on brightness level. " +
"If the parameter is active, switching on the Dimmer 2 (S1 single click) will always set this brightness level.\n" +
"Available settings:\n0 - function disabled,\n1-99 - percentage level of brightness.\n" +
"Default value: 0."
paragraph = "GROUP 20 - Dimmer 2 operation - Switches"
input name: "param20", type: "number", range: "0..2", required: true,
title: paragraph + "\n\n" +
"20. Switch type. " +
"Choose between momentary, toggle and roller blind switch.\n" +
"Available settings:\n" +
"0 = momentary switch,\n1 = toggle switch,\n2 = roller blind switch - two switches operate the Dimmer 2 (S1 to brighten, S2 to dim).\n" +
"Default value: 0."
input name: "param21", type: "number", range: "0..1", required: true,
title: "21. The value sent to associated devices on single click. " +
"This parameter defines the value sent to devices associated with Dimmer 2 after its enabling.\n" +
"Available settings:\n" +
"0 = 0xFF value is sent, which will set associated devices to their last saved state,\n" +
"1 = current Dimmer 2 state is sent, which will synchronize brightness level of associated devices (other dimmers for example).\n" +
"Default value: 0."
input name: "param22", type: "number", range: "0..1", required: true,
title: "22. Assign toggle switch status to the device status. " +
"By default each change of toggle switch position results in action of Dimmer 2 (switch on/off) regardless the physical connection of contacts.\n" +
"Available settings:\n" +
"0 = device changes status on switch status change,\n1 = device status is synchronized with switch status.\n" +
"Default value: 0."
input name: "param23", type: "number", range: "0..1", required: true,
title: "23. Double click option - set the brightness level to MAX.\n" +
"Available settings:\n" +
"0 = double click disabled,\n" +
"1 = double click enabled.\n" +
"Default value: 1."
input name: "param24", type: "number", range: "0..31", required: true,
title: "24. Command frames sent in 2nd and 3rd association groups (S1 associations). " +
"Parameter determines, which actions will not result in sending frames to association groups.\n" +
"Available settings (add together):\n" +
"0 = all actions send to association groups,\n" +
"1 = do not send when switching ON (single click),\n" +
"2 = do not send when switching OFF (single click),\n" +
"4 = do not send when changing dimming level (holding and releasing),\n" +
"8 = do not send on double click,\n" +
"16 = send 0xFF value on double click.\n" +
"Default value: 0."
input name: "param25", type: "number", range: "0..31", required: true,
title: "25. Command frames sent in 4th and 5th association groups (S2 associations). " +
"Parameter determines, which actions will not result in sending frames to association groups.\n" +
"Available settings (add together):\n" +
"0 = all actions send to association groups,\n" +
"1 = do not send when switching ON (single click),\n" +
"2 = do not send when switching OFF (single click),\n" +
"4 = do not send when changing dimming level (holding and releasing),\n" +
"8 = do not send on double click,\n" +
"16 = send 0xFF value on double click.\n" +
"Default value: 0."
input name: "param26", type: "number", range: "0..1", required: true,
title: "26. The function of 3-way switch. " +
"Switch no. 2 controls the Dimmer 2 additionally (in 3-way switch mode). Function disabled for parameter 20 set to 2 (roller blind switch).\n" +
"Available settings:\n" +
"0 = 3-way switch function for S2 disabled,\n" +
"1 = 3-way switch function for S2 enabled.\n" +
"Default value: 0."
input name: "param27", type: "number", range: "0..15", required: true,
title: "27. Associations in Z-Wave network security mode. " +
"This parameter defines how commands are sent in specified association groups: as secure or non-secure. " +
"Parameter is active only in Z-Wave network security mode. It does not apply to 1st lifeline group.\n" +
"Available settings (add together):\n" +
"0 = all groups (II-V) sent as non-secure,\n" +
"1 = 2nd group sent as secure,\n" +
"2 = 3rd group sent as secure,\n" +
"4 = 4th group sent as secure,\n" +
"8 = 5th group sent as secure,\n" +
"E.g. 15 = all groups (II-V) sent as secure.\n" +
"Default value: 15."
input name: "param28", type: "number", range: "0..1", required: true,
title: "28. Scene activation functionality.\n" +
"Available settings:\n" +
"0 = functionality deactivated,\n" +
"1 = functionality activated.\n" +
"Default value: 0.\n\n" +
"SCENE ID depends on the switch type configurations.\n" +
"Momentary switches:\n" +
"SCENE ID: S1 input:\n\t16 : 1 x click\n\t14 : 2 x click\n\t-- : 3 x click\n\t12 : hold\n\t13 : release\n" +
"SCENE ID: S2 input:\n\t26 : 1 x click\n\t24 : 2 x click\n\t25 : 3 x click\n\t22 : hold\n\t23 : release\n\n" +
"Toggle switches:\n" +
"SCENE ID: S1 input:\n\t10 : OFF to ON\n\t11 : ON to OFF\n\t14 : 2 x click\n\t-- : 3 x click\n" +
"SCENE ID: S2 input:\n\t20 : OFF to ON\n\t21 : ON to OFF\n\t24 : 2 x click\n\t25 : 3 x click\n\n" +
"Roller blinds switches:\n" +
"SCENE ID: S1 input:\n\t10 : turn ON (1 x click)\n\t13 : release\n\t14 : 2 x click\n\t-- : 3 x click\n\t17 : brightening\n" +
"SCENE ID: S2 input:\n\t11 : turn OFF (1 x click)\n\t13 : release\n\t14 : 2 x click\n\t15 : 3 x click\n\t18 : dimming"
input name: "param29", type: "number", range: "0..1", required: true,
title: "29. Switch functionality of S1 and S2. " +
"This parameter allows for switching the role of keys connected to S1 and S2 without changes in connection.\n" +
"Available settings:\n" +
"0 = standard mode,\n" +
"1 = S1 operates as S2, S2 operates as S1.\n" +
"Default value: 0."
paragraph = "GROUP 30 - Dimmer 2 operation - Advanced functionality"
input name: "param30", type: "number", range: "0..2", required: true,
title: paragraph + "\n\n" +
"30. Load control mode. " +
"This parameter allows to set the desired load control mode. " +
"The de- vice automatically adjusts correct control mode, but the installer may force its change using this parameter. " +
"Forced auto-calibration will set this parameter�s value to 2.\n" +
"Available settings:\n" +
"0 = forced leading edge control,\n" +
"1 = forced trailing edge control,\n" +
"2 = control mode selected automatically (based on auto-calibration).\n" +
"Default value: 2."
input name: "param32", type: "number", range: "0..2", required: true,
title: "32. On/Off mode. " +
"This mode is necessary while connecting non-dimmable light sources. " +
"Setting this parameter to 1 automatically ignores brightening/dimming time settings. " +
"Forced auto-calibration will set this parameter�s value to 2.\n" +
"Available settings:\n" +
"0 = on/off mode disabled (dimming is possible),\n" +
"1 = on/off mode enabled (dimming is not possible),\n" +
"2 = mode selected automatically.\n" +
"Default value: 2."
input name: "param34", type: "number", range: "0..2", required: true,
title: "34. Soft-Start functionality. " +
"Time required to warm up the lament of halogen bulb.\n" +
"Available settings:\n" +
"0 = no soft-start,\n" +
"1 = short soft-start (0.1s),\n" +
"2 = long soft-start (0.5s).\n" +
"Default value: 1."
input name: "param35", type: "number", range: "0..4", required: true,
title: "35. Auto-calibration after power on. " +
"This parameter determines the trigger of auto-calibration procedure, e.g. power on, load error, etc.\n" +
"Available settings:\n" +
"0 = No auto-calibration of the load after power on,\n" +
"1 = Auto-calibration performed after first power on,\n" +
"2 = Auto-calibration performed after each power on,\n" +
"3 = Auto-calibration performed after first power on or after each LOAD ERROR alarm (no load, load failure, burnt out bulb), if parameter 37 is set to 1 also after alarms: SURGE (Dimmer 2 output overvoltage) and OVERCURRENT (Dimmer 2 output overcurrent),\n" +
"4 = Auto-calibration performed after each power on or after each LOAD ERROR alarm (no load, load failure, burnt out bulb), if parameter 37 is set to 1 also after alarms: SURGE (Dimmer 2 output overvoltage) and OVERCURRENT (Dimmer 2 output overcurrent).\n" +
"Default value: 1."
input name: "param37", type: "number", range: "0..1", required: true,
title: "37. Behaviour of the Dimmer 2 after OVERCURRENT or SURGE. " +
"Occuring of errors related to surge or overcurrent results in turning off the output to prevent possible malfunction. " +
"By default the device performs three attempts to turn on the load (useful in case of momentary, short failures of the power supply).\n" +
"Available settings:\n" +
"0 = device permanently disabled until re-ena- bling by command or external switch,\n" +
"1 = three attempts to turn on the load.\n" +
"Default value: 1."
input name: "param39", type: "number", range: "0..350", required: true,
title: "39. Power limit - OVERLOAD. " +
"Reaching the defined value will result in turning off the load. " +
"Additional apparent power limit of 350VA is active by default.\n" +
"Available settings:\n0 - functionality disabled,\n1-350 - 1-350W.\n" +
"Default value: 250."
paragraph = "GROUP 40 - Dimmer 2 operation - Alarms"
input name: "param40", type: "number", range: "0..3", required: true,
title: paragraph + "\n\n" +
"40. Response to General Purpose Alarm.\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Turn on the load,\n" +
"2 = Turn off the load,\n" +
"3 = Load blinking.\n" +
"Default value: 3."
input name: "param41", type: "number", range: "0..3", required: true,
title: "41. Response to Water Flooding Alarm.\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Turn on the load,\n" +
"2 = Turn off the load,\n" +
"3 = Load blinking.\n" +
"Default value: 2."
input name: "param42", type: "number", range: "0..3", required: true,
title: "42. Response to Smoke, CO or CO2 Alarm.\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Turn on the load,\n" +
"2 = Turn off the load,\n" +
"3 = Load blinking.\n" +
"Default value: 3."
input name: "param43", type: "number", range: "0..3", required: true,
title: "43. Response to Temperature Alarm.\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Turn on the load,\n" +
"2 = Turn off the load,\n" +
"3 = Load blinking.\n" +
"Default value: 1."
input name: "param44", type: "number", range: "1..32767", required: true,
title: "44. Time of alarm state.\n" +
"Available settings: 1-32767 (1-32767 seconds).\n" +
"Default value: 600."
paragraph = "Alarm settings - reports"
input name: "param45", type: "number", range: "0..1", required: true,
title: paragraph + "\n\n" +
"45. OVERLOAD alarm report (load power consumption too high).\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Send an alarm frame.\n" +
"Default value: 1."
input name: "param46", type: "number", range: "0..1", required: true,
title: "46. LOAD ERROR alarm report (no load, load failure, burnt out bulb).\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Send an alarm frame.\n" +
"Default value: 1."
input name: "param47", type: "number", range: "0..1", required: true,
title: "47. OVERCURRENT alarm report (short circuit, burnt out bulb causing overcurrent).\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Send an alarm frame.\n" +
"Default value: 1."
input name: "param48", type: "number", range: "0..1", required: true,
title: "48. SURGE alarm report (Dimmer 2 output overvoltage).\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Send an alarm frame.\n" +
"Default value: 1."
input name: "param49", type: "number", range: "0..1", required: true,
title: "49. OVERHEAT (critical temperature) and VOLTAGE DROP (low voltage) alarm report.\n" +
"Available settings:\n" +
"0 = No reaction,\n" +
"1 = Send an alarm frame.\n" +
"Default value: 1."
paragraph = "GROUP 50 - Active power and energy reports"
input name: "param50", type: "number", range: "0..100", required: true,
title: paragraph + "\n\n" +
"50. Active power reports. " +
"The parameter defines the power level change that will result in a new power report being sent. " +
"The value is a percentage of the previous report.\n" +
"Available settings:\n0 - power reports disabled,\n1-100 (1-100%) - power report threshold.\n" +
"Default value: 10."
input name: "param52", type: "number", range: "0..32767", required: true,
title: "52. Periodic active power and energy reports. " +
"Parameter 52 defines a time period between consecutive reports. Timer is reset and counted from zero after each report.\n" +
"Available settings:\n0 - periodic reports disabled,\n1-32767 (1-32767 seconds).\n" +
"Default value: 3600."
input name: "param53", type: "number", range: "0..255", required: true,
title: "53. Energy reports. " +
"Energy level change which will result in sending a new energy report.\n" +
"Available settings:\n0 - energy reports disabled,\n1-255 (0.01-2.55 kWh) - report triggering threshold.\n" +
"Default value: 10."
input name: "param54", type: "number", range: "0..1", required: true,
title: "54. Self-measurement. " +
"The Dimmer 2 may include active power and energy consumed by itself in reports sent to the main controller.\n" +
"Available settings:\n" +
"0 = Self-measurement inactive,\n" +
"1 = Self-measurement active.\n" +
"Default value: 0."
input name: "param58", type: "number", range: "0..2", required: true,
title: "58. Method of calculating the active power. This parameter defines how to calculate active power. " +
"It is useful in a case of 2-wire connection with light sources other than resistive.\n" +
"Available settings:\n" +
"0 = measurement based on the standard algorithm,\n" +
"1 = approximation based on the calibration data,\n" +
"2 = approximation based on the control angle.\n" +
"Default value: 0."
input name: "param59", type: "number", range: "0..500", required: true,
title: "59. Approximated power at the maximum brightness level. " +
"This parameter determines the approximate value of the power that will be reported by the device at its maximum brightness level.\n" +
"Available settings: 0-500 (0-500W) - power consumed by the load at the maximum brightness level.\n" +
"Default value: 0."
input name: "paramAssociationGroup1", type: "bool", required: true,
title: "The Dimmer 2 provides the association of five groups.\n\n" +
"1st Association Group �Lifeline�,\n" +
"Default value: true"
input name: "paramAssociationGroup2", type: "bool", required: true,
title: "2nd Association Group �On/Off (S1)�,\n" +
"Default value: true"
input name: "paramAssociationGroup3", type: "bool", required: true,
title: "3rd Association Group �Dimmer (S1)�,\n" +
"Default value: false"
input name: "paramAssociationGroup4", type: "bool", required: true,
title: "4th Association Group �On/Off (S2)�,\n" +
"Default value: false"
input name: "paramAssociationGroup5", type: "bool", required: true,
title: "5th Association Group �Dimmer (S2)�.\n" +
"Default value: false"
}
}
}
/**********************************************************************
* Z-wave Event Handlers.
**********************************************************************/
/**
* parse() - Called when messages from a device are received by the hub.
*
* The parse method is responsible for interpreting those messages and returning Event definitions.
*
* String description - The message from the device.
**/
def parse(String description) {
if (state.debug) log.debug "${device.displayName}: parse(): Raw command: ${description}"
def result = null
if (description != "updated") {
// zwave.parse: The second parameter specifies which command version to return for each command type:
// FGD-212 supports:
// COMMAND_CLASS_BASIC [0x20: 1]
// COMMAND_CLASS_SWITCH_BINARY [0x25: 1]
// COMMAND_CLASS_SCENE_ACTIVATION [0x2B: 1]
// COMMAND_CLASS_METER_V3 [0x32: 3]
// COMMAND_CLASS_CONFIGURATION [0x70: 1]
// ...
def cmd = zwave.parse(description.replace("98C1", "9881"), [0x20: 1, 0x25: 1, 0x26: 3, 0x28: 1, 0x2B: 1, 0x30: 1, 0x32: 3, 0x70: 1, 0x72: 1, 0x73: 1, 0x85: 2, 0x90: 1, 0x98: 1, 0x9B: 1])
// The purpose of the replace statement here is to fix a bug, see here: https://community.smartthings.com/t/wireless-wall-switch-zme-wallc-s-to-control-smartthings-devices-and-routines/24810/28
if (cmd) {
result = zwaveEvent(cmd)
}
}
if (state.debug) log.debug "Parsed '${description}' to ${result.inspect()}"
return result
}
/**
* COMMAND_CLASS_BASIC (0x20)
*
* Short value 0xFF for on, 0x00 for off
**/
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
log.trace "${device.displayName}: Switch Basic Report received: ${cmd}"
dimmerEvents(cmd)
}
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
log.trace "${device.displayName}: Switch Basic Set received: ${cmd}"
//dimmerEvents(cmd)
}
/**
* COMMAND_CLASS_SWITCH_BINARY (0x25)
*
* Short value 0xFF for on, 0x00 for off
**/
def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
{
log.trace "${device.displayName}: Switch Binary Report received: ${cmd}"
dimmerEvents(cmd)
}
/**
* COMMAND_CLASS_SWITCH_MULTILEVEL (0x26)
*
* Short value 0x00 for off, other values are level (on).
* List<Short> payload
**/
def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
log.trace "${device.displayName}: Switch Multilevel Report received: ${cmd}"
dimmerEvents(cmd)
}
/**
* dimmerEvents():
*
* Common handler for BasicReport, SwitchBinaryReport, SwitchMultilevelReport.
*
* Requests a Meter Report if there has been a change.
**/
def dimmerEvents(physicalgraph.zwave.Command cmd) {
def result = []
def isStateChange
def value = (cmd.value ? "on" : "off")
def switchEvent = createEvent(name: "switch", value: value, descriptionText: "$device.displayName was turned $value")
result << switchEvent
isStateChange = switchEvent.isStateChange
if (cmd.value) {
def levelEvent = createEvent(name: "level", value: cmd.value, unit: "%")
result << levelEvent
isStateChange = (switchEvent.isStateChange || levelEvent.isStateChange)
}
if (isStateChange) {
if (state.debug) log.debug "${device.displayName}: dimmerEvents(): State changed, so checking for pending level and requesting meter report."
def pendingCmd = ((value == "on") ? checkNightmode() : []) // Only restore pending level if dimmer is switching on.
result << response(pendingCmd + ["delay 5000", secure(zwave.meterV3.meterGet(scale: 2)),"delay 10000", secure(zwave.meterV3.meterGet(scale: 2))])
// Meter request is delayed for 5s, although sometimes this isn't long enough, so make a second request after another 10 seconds.
}
return result
}
/**
* COMMAND_CLASS_SCENE_ACTIVATION (0x2B)
*
* Short dimmingDuration
* Short sceneId
* List<Short> payload
*
* String format()
*
**/
def zwaveEvent(physicalgraph.zwave.commands.sceneactivationv1.SceneActivationSet cmd) {
log.trace "${device.displayName}: Scene Activation: ${cmd}"
sendEvent(name: "scene", value: "$cmd.sceneId", data: [switchType: "$settings.param20"], descriptionText: "Scene id $cmd.sceneId was activated", isStateChange: true)
}
/**
* COMMAND_CLASS_METER_V3 (0x32)
*
* FGD-212 supports energy and power only. Will not report current, voltage, or power factor.
*
* Integer deltaTime Time in seconds since last report
* Short meterType Unknown = 0, Electric = 1, Gas = 2, Water = 3
* List<Short> meterValue Meter value as an array of bytes
* Double scaledMeterValue Meter value as a double
* List<Short> previousMeterValue Previous meter value as an array of bytes
* Double scaledPreviousMeterValue Previous meter value as a double
* Short size The size of the array for the meterValue and previousMeterValue
* Short scale The scale of the values: "kWh"=0, "kVAh"=1, "Watts"=2, "pulses"=3, "Volts"=4, "Amps"=5, "Power Factor"=6, "Unknown"=7
* Short precision The decimal precision of the values
* Short rateType ???
* Boolean scale2 ???
*
**/
def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd) {
log.trace "${device.displayName}: Meter Report received: ${cmd}"
if (cmd.meterType == 1) {
if (cmd.scale == 0) {
// Accumulated Energy (kWh)
state.energy = cmd.scaledMeterValue
sendEvent(name: "dispEnergy", value: String.format("%.2f",cmd.scaledMeterValue as BigDecimal) + " kWh", displayed: false)
return createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kWh")
} else if (cmd.scale == 1) {
// Accumulated Energy (kVAh) - Ignored
//sendEvent(name: "dispEnergy", value: String.format("%.2f",cmd.scaledMeterValue as BigDecimal) + " kVAh", displayed: false)
//return createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kVAh")
} else if (cmd.scale == 2) {
// Instantaneous Power (Watts)
sendEvent(name: "dispPower", value: String.format("%.1f",cmd.scaledMeterValue as BigDecimal) + " W", displayed: false)
return createEvent(name: "power", value: cmd.scaledMeterValue, unit: "W")
} else if (cmd.scale == 4) {
// Instantaneous Voltage (Volts) - Not supported by the FGD-212.
//sendEvent(name: "dispVoltage", value: String.format("%.1f",cmd.scaledMeterValue as BigDecimal) + " V", displayed: false)
//return createEvent(name: "voltage", value: cmd.scaledMeterValue, unit: "V")
} else if (cmd.scale == 5) {
// Instantaneous Current (Amps) - Not supported by the FGD-212.
//sendEvent(name: "dispCurrent", value: String.format("%.1f",cmd.scaledMeterValue as BigDecimal) + " A", displayed: false)
//return createEvent(name: "current", value: cmd.scaledMeterValue, unit: "A")
} else if (cmd.scale == 6) {
// Instantaneous Power Factor - Not supported by the FGD-212.
//sendEvent(name: "dispPowerFactor", value: "PF: " + String.format("%.2f",cmd.scaledMeterValue as BigDecimal), displayed: false)
//return createEvent(name: "powerFactor", value: cmd.scaledMeterValue, unit: "PF")
} else {
// Unknown Meter Report Scale:
log.warn "${device.displayName}: zwaveEvent(): Unhandled Meter Report: Scale: ${cmd.scale}"
}
}
}
/**
* COMMAND_CLASS_CONFIGURATION (0x70)
*
* Log received configuration values.
**/
def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
log.trace "${device.displayName}: Configuration Report received: ${cmd}"
// Translate configurationValue (byte array) back to scaledConfigurationValue (double):
// This should be done in zwave.parse() but isn't implemented yet.
// See: https://community.smartthings.com/t/zwave-configurationv2-configurationreport-dev-question/9771
def scValue = 0
if (cmd.size == 1) { scValue = cmd.configurationValue[0]}
else if (cmd.size == 2) { scValue = cmd.configurationValue[1] + (cmd.configurationValue[0] * 0x100) }
else if (cmd.size == 3) { scValue = cmd.configurationValue[2] + (cmd.configurationValue[1] * 0x100) + (cmd.configurationValue[0] * 0x10000) }
else if (cmd.size == 4) { scValue = cmd.configurationValue[3] + (cmd.configurationValue[2] * 0x100) + (cmd.configurationValue[1] * 0x10000) + (cmd.configurationValue[0] * 0x1000000) }
// Cache param19 as it's needed for nightmode:
if ( 19 == cmd.parameterNumber.toInteger()) state.preferencesCache_param19 = scValue
}
/**
* securityv1.SecurityMessageEncapsulation (0x98)
*
* List<Short> commandByte
* Short commandClassIdentifier
* Short commandIdentifier
* Boolean secondFrame
* Short sequenceCounter
* Boolean sequenced
* List<Short> payload
*
* String format()
*
* Devices that support the Security command class can send messages in an encrypted form;
* they arrive wrapped in a SecurityMessageEncapsulation command and must be unencapsulated
**/
def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
log.trace(cmd)
def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x26: 3, 0x28: 1, 0x2B: 1, 0x30: 1, 0x32: 3, 0x70: 1, 0x72: 1, 0x73: 1, 0x85: 2, 0x90: 1, 0x98: 1, 0x9B: 1]) // can specify command class versions here like in zwave.parse
if (encapsulatedCommand) {
return zwaveEvent(encapsulatedCommand)
} else {
log.warn "Unable to extract encapsulated cmd from $cmd"
createEvent(descriptionText: cmd.toString())
}
}
/**
* Default event handler.
*
* Called for all events that aren't handled above.
**/
def zwaveEvent(physicalgraph.zwave.Command cmd) {
log.warn "${device.displayName}: No handler for command: $cmd"
// Handles all Z-Wave commands we aren't interested in
createEvent(descriptionText: cmd.toString(), isStateChange: false)
}
/**********************************************************************
* Capability-related Commands:
**********************************************************************/
/**
* on() - Turns the switch on.
*
* Required for the "Switch" capability.
**/
def on() {
log.trace "${device.displayName}: on()"
secureSequence([
zwave.basicV1.basicSet(value: 0xFF),
zwave.switchMultilevelV1.switchMultilevelGet()
],8000) // 8s gap. Dimmer should send a report after the basicSet, the switchMultilevelGet is only needed in case the auto-report is missed.
}
/**
* off() - Turns the switch off.
*
* Required for the "Switch" capability.
**/
def off() {
log.trace "${device.displayName}: off()"
secureSequence([
zwave.basicV1.basicSet(value: 0x00),
zwave.switchMultilevelV1.switchMultilevelGet()
],8000) // 8s gap. Dimmer should send a report after the basicSet, the switchMultilevelGet is only needed in case the auto-report is missed.
}
/**
* setLevel()
*
* Required for the "Switch Level" capability.
**/
def setLevel(level) {
log.trace "${device.displayName}: setLevel(${level})"
if (level > 99) level = 99
secureSequence([
zwave.basicV1.basicSet(value: level),
zwave.switchMultilevelV1.switchMultilevelGet()
],8000) // 8s gap. Dimmer should send a report after the basicSet, the switchMultilevelGet is only needed in case the auto-report is missed.
}
/**
* poll() - Polls the device.
*
* Required for the "Polling" capability
**/
def poll() {
log.trace("${device.displayName}: poll()")
secureSequence([
zwave.switchMultilevelV1.switchMultilevelGet(),
zwave.meterV3.meterGet(scale: 0),
zwave.meterV3.meterGet(scale: 2)
])
}
/**
* refresh() - Refreshes values from the device. Same as poll()?
*
* Required for the "Refresh" capability.
**/
def refresh() {
log.trace("${device.displayName}: refresh()")
secureSequence([
zwave.switchMultilevelV1.switchMultilevelGet(),
zwave.meterV3.meterGet(scale: 0),
zwave.meterV3.meterGet(scale: 2)
])
}
/**
* reset() - Reset the Accumulated Energy figure held in the device.
*
**/
def reset() {
log.trace("${device.displayName}: reset()")
state.lastReset = new Date().format("YYYY/MM/dd \n HH:mm:ss", location.timeZone)
sendEvent(name: "lastReset", value: state.lastReset, unit: "",descriptionText: "Accumulated Energy Reset")
state.energy = 0.00
return secureSequence([
zwave.meterV3.meterReset(),
zwave.meterV3.meterGet(scale: 0)
],500)
}
/**
* configure() - Not sure when this is run?
*
**/
def configure() {
// Wait until after the secure exchange for this
log.debug "configure()"
}
/**
* installed() - Runs when the device is first installed.
**/
def installed() {
log.debug "${device.displayName}: installed()"
state.installedAt = now()
state.energy = 0
state.lastReset = new Date().format("YYYY/MM/dd \n HH:mm:ss", location.timeZone)
}
/**
* updated() - Runs when you hit "Done" from "Edit Device".
*
* Weirdly, it seems to be called twice after hitting "Done"!
*
* Note, the updated() method is not a 'command', so it doesn't send commands by default.
* To execute commands from updated() you have to specifically return a HubAction object.
* The response() helper wraps commands up in a HubAction so they can be sent from parse() or updated().
* See: https://community.smartthings.com/t/remotec-z-thermostat-configuration-with-z-wave-commands/31956/12
**/
def updated() {
log.debug "${device.displayName}: Updated()"
// Update internal state:
state.debug = ("true" == configDebugMode)
state.preferencesCache_param19 = param19.toInteger()
// Manage Schedules:
manageSchedules()
// Configure device:
response(["delay 2000"] + configureAfterSecure() + refresh())
}
/**
* manageSchedules() - Unschedule/schedule Nightmode Start and Stop.
**/
def manageSchedules() {
if (state.debug) log.debug "$device.displayName: manageSchedules()"
if (configNightmodeStartTime) {
if (state.debug) log.debug "$device.displayName: manageSchedules(): Nightmode scheduled to start at ${configNightmodeStartTime}"
schedule(configNightmodeStartTime, "enableNightmode")
} else {
try {
unschedule("enableNightmode")
}
catch(e) {
// Unschedule failed
}
}
if (configNightmodeStopTime) {
if (state.debug) log.debug "$device.displayName: manageSchedules(): Nightmode scheduled to stop at ${configNightmodeStopTime}"
schedule(configNightmodeStopTime, "disableNightmode")
} else {
try {
unschedule("disableNightmode")
}
catch(e) {
// Unschedule failed
}
}
}
/**********************************************************************
* Custom Commands:
**********************************************************************/
/**
* enableNightmode(level)
*
* Force switch-on illuminance level.
**/
def enableNightmode(level=-1) {
log.info "${device.displayName}: enableNightmode(${level})"
def cmds = []
// Clean level value:
if (level == -1) level = configNightmodeLevel
if (level > 99) level = 99
if (level < 1) level = 1
// If nightmode is not already active, save current level and current value of param19, so they can be restored when nightmode is stopped:
if (!state.nightmodeActive) {
state.nightmodePriorLevel = device.latestValue("level")
log.info "${device.displayName}: enableNightmode(): Saved previous level: ${state.nightmodePriorLevel}"
if (!state.preferencesCache_param19) state.preferencesCache_param19 = 0
state.nightmodePriorParam19 = state.preferencesCache_param19.toInteger()
log.info "${device.displayName}: enableNightmode(): Saved previous param19: ${state.nightmodePriorParam19}"
}
// If the dimmer is already on, and configNightmodeForce is enabled, then adjust the level immediately:
if (("on" == device.latestValue("switch")) & ("true" == configNightmodeForce)) cmds << secure(zwave.basicV1.basicSet(value: level))
state.nightmodeActive = true
sendEvent(name: "nightmode", value: "Enabled", descriptionText: "Nightmode Enabled", isStateChange: true)
// Update parameter #19 for force next switch-on level:
cmds << secure(zwave.configurationV1.configurationSet(parameterNumber: 19, size: 1, scaledConfigurationValue: level))
cmds
}
/**
* disableNightmode()
*
* Stop nightmode and restore previous values.
**/
def disableNightmode() {
log.info "${device.displayName}: disableNightmode()"
def cmds = []
// If nightmode is active, restore param19:
if (state.nightmodeActive) {
if (state.debug) log.debug "${device.displayName}: disableNightmode(): Restoring previous value of param19 to: ${state.nightmodePriorParam19}"
cmds << secure(zwave.configurationV1.configurationSet(parameterNumber: 19, size: 1, scaledConfigurationValue: state.nightmodePriorParam19.toInteger()))
state.preferencesCache_param19 = state.nightmodePriorParam19
if (("on" == device.latestValue("switch")) & ("true" == configNightmodeForce)) {
// Dimmer is already on and configNightmodeForce is enabled, so adjust the level immediately:
if (state.debug) log.debug "${device.displayName}: disableNightmode(): Restoring level to: ${state.nightmodePriorLevel}"
cmds << secure(zwave.basicV1.basicSet(value: state.nightmodePriorLevel.toInteger()))
} else if (0 == state.preferencesCache_param19) {
// Dimmer is off (or configNightmodeForce is not enabled), so need to set a flag to restore the level after it's switched on again, but only if param19 is zero.
if (state.debug) log.debug "${device.displayName}: disableNightmode(): Setting flag to restore level at next switch-on: ${state.nightmodePriorLevel}"
state.nightmodePendingLevel = state.nightmodePriorLevel
}
}
state.nightmodeActive = false
sendEvent(name: "nightmode", value: "Disabled", descriptionText: "Nightmode Disabled", isStateChange: true)
cmds
}
/**
* checkNightmode()
*
* Checks nightmodePendingLevel to see if there's a pending level which should be restored.
**/
def checkNightmode() {
if (state.debug) log.debug "$device.displayName: checkNightmode()"
def cmds = []
if (state.nightmodePendingLevel) {
if (state.debug) log.debug "$device.displayName: checkNightmode(): Applying Pending Level: ${state.nightmodePendingLevel}"
cmds = setLevel(state.nightmodePendingLevel)
state.nightmodePendingLevel = false
}
cmds
}
/**
* toggleNightmode()
**/
def toggleNightmode() {
if (state.debug) log.debug "$device.displayName: toggleNightmode()"
if (state.nightmodeActive) {
disableNightmode()
}
else {
enableNightmode(configNightmodeLevel)
}
}
/**
* changeSingleParamAfterSecure() - Change a single device parameter.
**/
def changeSingleParamAfterSecure(paramNum, paramSize, paramValue) {
log.debug "changeSingleParamAfterSecure(paramNum: $paramNum, paramSize: $paramSize, paramValue: $paramValue)"
def cmds = secureSequence([
zwave.configurationV1.configurationSet(parameterNumber: paramNum, size: paramSize, scaledConfigurationValue: paramValue)
])
cmds
}
/**
* configureAfterSecure() - Set device parameters.
**/
def configureAfterSecure() {
log.debug "configureAfterSecure()"
def cmds = secureSequence([
zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, scaledConfigurationValue: param1.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: param2.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: param3.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 4, size: 2, scaledConfigurationValue: param4.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: param5.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: param6.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 7, size: 1, scaledConfigurationValue: param7.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 8, size: 2, scaledConfigurationValue: param8.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 9, size: 1, scaledConfigurationValue: param9.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 10, size: 2, scaledConfigurationValue: param10.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 11, size: 2, scaledConfigurationValue: param11.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 13, size: 1, scaledConfigurationValue: param13.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 15, size: 1, scaledConfigurationValue: param15.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 16, size: 2, scaledConfigurationValue: param16.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 19, size: 1, scaledConfigurationValue: param19.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 20, size: 1, scaledConfigurationValue: param20.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 21, size: 1, scaledConfigurationValue: param21.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 22, size: 1, scaledConfigurationValue: param22.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 23, size: 1, scaledConfigurationValue: param23.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 24, size: 1, scaledConfigurationValue: param24.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 25, size: 1, scaledConfigurationValue: param25.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 26, size: 1, scaledConfigurationValue: param26.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 27, size: 1, scaledConfigurationValue: param27.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 28, size: 1, scaledConfigurationValue: param28.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 29, size: 1, scaledConfigurationValue: param29.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 30, size: 1, scaledConfigurationValue: param30.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 32, size: 1, scaledConfigurationValue: param32.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 34, size: 1, scaledConfigurationValue: param34.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 35, size: 1, scaledConfigurationValue: param35.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 37, size: 1, scaledConfigurationValue: param37.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 39, size: 2, scaledConfigurationValue: param39.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 40, size: 1, scaledConfigurationValue: param40.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 41, size: 1, scaledConfigurationValue: param41.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 42, size: 1, scaledConfigurationValue: param42.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 43, size: 1, scaledConfigurationValue: param43.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 44, size: 2, scaledConfigurationValue: param44.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 45, size: 1, scaledConfigurationValue: param45.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 46, size: 1, scaledConfigurationValue: param46.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 47, size: 1, scaledConfigurationValue: param47.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 48, size: 1, scaledConfigurationValue: param48.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 49, size: 1, scaledConfigurationValue: param49.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 50, size: 1, scaledConfigurationValue: param50.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 52, size: 2, scaledConfigurationValue: param52.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 53, size: 2, scaledConfigurationValue: param53.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 54, size: 1, scaledConfigurationValue: param54.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 58, size: 1, scaledConfigurationValue: param58.toInteger()),
zwave.configurationV1.configurationSet(parameterNumber: 59, size: 2, scaledConfigurationValue: param59.toInteger())
])
// Register for Group 1
if(paramAssociationGroup1) {
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId]))
}
else {
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:1, nodeId: [zwaveHubNodeId]))
}
// Register for Group 2
if(paramAssociationGroup2) {
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:2, nodeId: [zwaveHubNodeId]))
}
else {
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:2, nodeId: [zwaveHubNodeId]))
}
// Register for Group 3
if(paramAssociationGroup3) {
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:3, nodeId: [zwaveHubNodeId]))
}
else {
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:3, nodeId: [zwaveHubNodeId]))
}
// Register for Group 4
if(paramAssociationGroup4) {
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:4, nodeId: [zwaveHubNodeId]))
}
else {
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:4, nodeId: [zwaveHubNodeId]))
//cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:4, nodeId: [10]))
}
// Register for Group 5
if(paramAssociationGroup5) {
//cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:5, nodeId: [zwaveHubNodeId]))
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:5, nodeId: [10]))
}
else {
//cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:5, nodeId: [zwaveHubNodeId]))
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:5, nodeId: [10]))
}
cmds
}
/**
* secure() - Encapsulate zwave commands.
**/
private secure(physicalgraph.zwave.Command cmd) {
log.trace(cmd)
zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
}
/**
* secureSequence() - Secure and send an array of commands.
**/
private secureSequence(commands, delay=200) {
log.debug "$commands"
delayBetween(commands.collect{ secure(it) }, delay)
}
/**
* getConfigReport() - Get current device parameters and output to debug log.
*
* The device settings in the UI cannot be updated due to platform restrictions.
*/
def getConfigReport() {
log.debug "Getting Device Configuration"
def cmds = []
cmds << zwave.configurationV1.configurationGet(parameterNumber: 1)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 2)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 3)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 4)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 5)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 6)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 7)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 8)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 9)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 10)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 11)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 13)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 19)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 30)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 31)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 32)
cmds << zwave.configurationV1.configurationGet(parameterNumber: 34)
secureSequence(cmds, 200)
}
/**
* test() - Temp testing method.
**/
def test() {
if (state.debug) log.debug "$device.displayName: Test()"
//manageSchedules()
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment