steveatinfincia

        case MAVLINK_MSG_ID_PARAM_REQUEST_LIST: {
            mavlink_param_request_list_t request;
            mavlink_msg_param_request_list_decode(&msg, &request);

            /* this is how you would load a setting for the component when
             * replying to a settings request
             */
            QSettings settings;
            settings.beginGroup("OpenHDCamera");

steveatinfincia

QT_MAJOR_VERSION=5.13
QT_MINOR_VERSION=1

# fix broadcom opengl  library names without breaking anything else
ln -sf /opt/vc/lib/libbrcmEGL.so /opt/vc/lib/libEGL.so
ln -sf /opt/vc/lib/libEGL.so /opt/vc/lib/libEGL.so.1
ln -sf /opt/vc/lib/libbrcmGLESv2.so /opt/vc/lib/libGLESv2.so
ln -sf /opt/vc/lib/libbrcmGLESv2.so /opt/vc/lib/libGLESv2.so.2
ln -sf /opt/vc/lib/libbrcmOpenVG.so /opt/vc/lib/libOpenVG.so
ln -sf /opt/vc/lib/libbrcmWFC.so /opt/vc/lib/libWFC.so

steveatinfincia

import picamera
import subprocess
from time import sleep

proc = subprocess.Popen([
     '/usr/bin/gst-launch-1.0',
     'fdsrc', '!',
     'h264parse', '!',
     'rtph264pay', 'config-interval=1', 'pt=96', '!',
     'udpsink', 'host=192.168.40.14', 'port=5600'

steveatinfincia

/*
 * Author: Jurgen "PlantCorn" Schull <j.schull@plantcorn.com>
 * I originally created this for a mode 2 controller (Turnigy 9xr Pro) as most of the other
 * solutions available to me simply did not work or were too much of a pain.
 * things such as smartpropro plus did not work at all for me, and out of frustration I
 * created this. I calibrated the controller, and within minutes i was able to use my
 * favorite sims, I hope this also works for you. 
 * Be sure to upload to your teensy in serial+keyboard+mouse+joych mode, 72mhz optimized
 * i used a Teensy 3.1 with ppm input on pin 10 and ppm ground to GND
*/

steveatinfincia

/* Complete USB Joystick Example
   You must select Joystick from the "Tools > USB Type" menu and edit the Teensy headers to enable
   the maxy axis joystick mode, otherwise some of the axis will not be available
*/

void setup() {
  // you can print to the serial monitor while the joystick is active!
  Serial.begin(115200);
  // configure the joystick to manual send mode.  This gives precise
  // control over when the computer receives updates, but it does

steveatinfincia

/* Complete USB Joystick Example
   You must select Joystick from the "Tools > USB Type" menu and edit the Teensy headers to enable
   the mega-joystick mode, otherwise some of the axis will not be available
*/

void setup() {
  // you can print to the serial monitor while the joystick is active!
  Serial.begin(115200);
  // configure the joystick to manual send mode.  This gives precise
  // control over when the computer receives updates, but it does

steveatinfincia

install_name_tool -id "@rpath/libmy.dylib" dist-x86_64-apple-darwin/lib/libmy.dylib || true
clang -o test src/test.c -rpath dist-x86_64-apple-darwin/lib -Ldist-x86_64-apple-darwin/lib -Idist-x86_64-apple-darwin/include -lmy -O2

steveatinfincia

// error:

error[E0277]: the trait bound `mymodule::MyHeader: mymodule::reqwest::header::Header` is not satisfied

// in crate root

#[macro_use] extern crate hyper;

// original code in mymodule using header! macro from Hyper
extern crate reqwest;

steveatinfincia

func search(words: [String]?) -> [Codepoint] {
    guard let searchTerms = words else {
        print("failed to unpack words")
        return []
    }
    
    var predicates : [NSPredicate] = [NSPredicate]()
    for term in searchTerms {
        let codePredicate = NSPredicate(format: "(%@ IN[cd] code)", term)
        let typePredicate = NSPredicate(format: "(%@ IN[cd] type)", term)

steveatinfincia

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

I am transitioning my gpg key from a 2048-bit RSA key to a new
4096-bit RSA key.

The new key is signed by the old key, and this transition document 
is signed with both keys.