steverob/blink.pde

## blink.pde
/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.

  This example code is in the public domain.
 */

void setup() {
  // initialize the digital pin as an output.
  // Pin 13 has an LED connected on most Arduino boards:
  pinMode(13, OUTPUT);
}

void loop() {
  digitalWrite(13, HIGH);   // set the LED on
  delay(1000);              // wait for a second
  digitalWrite(13, LOW);    // set the LED off
  delay(1000);              // wait for a second
}
	/*
	Blink
	Turns on an LED on for one second, then off for one second, repeatedly.

	This example code is in the public domain.
	*/

	void setup() {
	// initialize the digital pin as an output.
	// Pin 13 has an LED connected on most Arduino boards:
	pinMode(13, OUTPUT);
	}

	void loop() {
	digitalWrite(13, HIGH); // set the LED on
	delay(1000); // wait for a second
	digitalWrite(13, LOW); // set the LED off
	delay(1000); // wait for a second
	}