gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x501f0000]
[    0.000000] Linux version 5.15.2+ (ubuntu@c2400) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP Thu Nov 18 22:08:36 UTC 2021
[    0.000000] Machine model: APM X-Gene Merlin board
[    0.000000] efi: EFI v2.40 by X-Gene Merlin Board EFI Aug 19 2016 18:09:46
[    0.000000] efi: ACPI=0x4ffa808000 ACPI 2.0=0x4ffa808014 SMBIOS 3.0=0x4ffa806000 ESRT=0x4fff039818 MEMRESERVE=0x4ffa3e1d18 
[    0.000000] esrt: Reserving ESRT space from 0x0000004fff039818 to 0x0000004fff039878.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x4ff7d27340-0x4ff7d2bfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000004000000000-0x00000040001fffff]
[    0.000000]   node   0: [mem 0x0000004000200000-0x0000004ffa7b9fff]
[    0.000000]   node   0: [mem 0x0000004ffa7ba000-0x0000004ffa7f2fff]
[    0.000000]   node   0: [mem 0x0000004ffa7f3000-0x0000004ffa7fcfff]
[    0.000000]   node   0: [mem 0x0000004ffa7fd000-0x0000004ffa7fdfff]
[    0.000000]   node   0: [mem 0x0000004ffa7fe000-0x0000004ffa804fff]
[    0.000000]   node   0: [mem 0x0000004ffa805000-0x0000004ffa806fff]
[    0.000000]   node   0: [mem 0x0000004ffa807000-0x0000004ffa808fff]
[    0.000000]   node   0: [mem 0x0000004ffa809000-0x0000004ffa9ecfff]
[    0.000000]   node   0: [mem 0x0000004ffa9ed000-0x0000004fff9b0fff]
[    0.000000]   node   0: [mem 0x0000004fff9b1000-0x0000004fff9f6fff]
[    0.000000]   node   0: [mem 0x0000004fff9f7000-0x0000004fffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000] cma: Reserved 32 MiB at 0x0000004000400000
[    0.000000] percpu: Embedded 30 pages/cpu s83032 r8192 d31656 u122880
[    0.000000] pcpu-alloc: s83032 r8192 d31656 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16515072
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.15.2+ root=UUID=d040cf48-7efd-48fd-9de2-86ab9c7553f2 ro
[    0.000000] Unknown command line parameters: BOOT_IMAGE=/vmlinuz-5.15.2+
[    0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 65647820K/67108864K available (15872K kernel code, 3702K rwdata, 13720K rodata, 8064K init, 1181K bss, 1428276K reserved, 32768K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x30/0x4d8 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 52445 entries in 205 pages
[    0.000000] ftrace: allocated 205 pages with 5 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Adjusting CPU interface base to 0x00000000780af000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] GICv2m: range[mem 0x79000000-0x79000fff], SPI[224:231]
[    0.000000] GICv2m: range[mem 0x79010000-0x79010fff], SPI[232:239]
[    0.000000] GICv2m: range[mem 0x79020000-0x79020fff], SPI[240:247]
[    0.000000] GICv2m: range[mem 0x79030000-0x79030fff], SPI[248:255]
[    0.000000] GICv2m: range[mem 0x79040000-0x79040fff], SPI[256:263]
[    0.000000] GICv2m: range[mem 0x79050000-0x79050fff], SPI[264:271]
[    0.000000] GICv2m: range[mem 0x79060000-0x79060fff], SPI[272:279]
[    0.000000] GICv2m: range[mem 0x79070000-0x79070fff], SPI[280:287]
[    0.000000] GICv2m: range[mem 0x79080000-0x79080fff], SPI[288:295]
[    0.000000] GICv2m: range[mem 0x79090000-0x79090fff], SPI[296:303]
[    0.000000] GICv2m: range[mem 0x790a0000-0x790a0fff], SPI[304:311]
[    0.000000] GICv2m: range[mem 0x790b0000-0x790b0fff], SPI[312:319]
[    0.000000] GICv2m: range[mem 0x790c0000-0x790c0fff], SPI[320:327]
[    0.000000] GICv2m: range[mem 0x790d0000-0x790d0fff], SPI[328:335]
[    0.000000] GICv2m: range[mem 0x790e0000-0x790e0fff], SPI[336:343]
[    0.000000] GICv2m: range[mem 0x790f0000-0x790f0fff], SPI[344:351]
[    0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[    0.000000] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[    0.000206] Console: colour dummy device 80x25
[    0.000374] printk: console [tty0] enabled
[    0.000424] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
[    0.000433] pid_max: default: 32768 minimum: 301
[    0.000483] LSM: Security Framework initializing
[    0.000498] Yama: becoming mindful.
[    0.000542] AppArmor: AppArmor initialized
[    0.000649] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000719] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.001567] rcu: Hierarchical SRCU implementation.
[    0.002473] Remapping and enabling EFI services.
[    0.002806] smp: Bringing up secondary CPUs ...
[    0.003053] Detected PIPT I-cache on CPU1
[    0.003086] CPU1: Booted secondary processor 0x0000000001 [0x501f0000]
[    0.003392] Detected PIPT I-cache on CPU2
[    0.003416] CPU2: Booted secondary processor 0x0000000100 [0x501f0000]
[    0.003684] Detected PIPT I-cache on CPU3
[    0.003701] CPU3: Booted secondary processor 0x0000000101 [0x501f0000]
[    0.003972] Detected PIPT I-cache on CPU4
[    0.003997] CPU4: Booted secondary processor 0x0000000200 [0x501f0000]
[    0.004281] Detected PIPT I-cache on CPU5
[    0.004298] CPU5: Booted secondary processor 0x0000000201 [0x501f0000]
[    0.004571] Detected PIPT I-cache on CPU6
[    0.004596] CPU6: Booted secondary processor 0x0000000300 [0x501f0000]
[    0.004875] Detected PIPT I-cache on CPU7
[    0.004893] CPU7: Booted secondary processor 0x0000000301 [0x501f0000]
[    0.004936] smp: Brought up 1 node, 8 CPUs
[    0.004958] SMP: Total of 8 processors activated.
[    0.004963] CPU features: detected: 32-bit EL0 Support
[    0.004966] CPU features: detected: 32-bit EL1 Support
[    0.004971] CPU features: detected: CRC32 instructions
[    0.005047] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.014296] CPU: All CPU(s) started at EL2
[    0.014340] alternatives: patching kernel code
[    0.025596] devtmpfs: initialized
[    0.039027] Registered cp15_barrier emulation handler
[    0.039042] Registered setend emulation handler
[    0.039049] KASLR disabled due to lack of seed
[    0.039138] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.039157] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.039644] pinctrl core: initialized pinctrl subsystem
[    0.040025] SMBIOS 3.0.0 present.
[    0.040038] DMI: AppliedMicro X-Gene Merlin Board/X-Gene Merlin Board, BIOS 3.06.15 Aug 19 2016
[    0.040323] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.041404] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.041911] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.042413] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.042439] audit: initializing netlink subsys (disabled)
[    0.042517] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.042954] thermal_sys: Registered thermal governor 'fair_share'
[    0.042958] thermal_sys: Registered thermal governor 'bang_bang'
[    0.042964] thermal_sys: Registered thermal governor 'step_wise'
[    0.042968] thermal_sys: Registered thermal governor 'user_space'
[    0.042972] thermal_sys: Registered thermal governor 'power_allocator'
[    0.043022] cpuidle: using governor ladder
[    0.043037] cpuidle: using governor menu
[    0.043090] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.043185] ASID allocator initialised with 32768 entries
[    0.043602] Serial: AMBA PL011 UART driver
[    0.053328] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.053338] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.053343] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.053348] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.055996] fbcon: Taking over console
[    0.056018] ACPI: Interpreter disabled.
[    0.056416] iommu: Default domain type: Translated 
[    0.056424] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.056547] vgaarb: loaded
[    0.056957] SCSI subsystem initialized
[    0.057030] libata version 3.00 loaded.
[    0.057102] usbcore: registered new interface driver usbfs
[    0.057125] usbcore: registered new interface driver hub
[    0.057143] usbcore: registered new device driver usb
[    0.057501] pps_core: LinuxPPS API ver. 1 registered
[    0.057509] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.057520] PTP clock support registered
[    0.057616] EDAC MC: Ver: 3.0.0
[    0.057942] Registered efivars operations
[    0.058483] NetLabel: Initializing
[    0.058490] NetLabel:  domain hash size = 128
[    0.058494] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.058525] NetLabel:  unlabeled traffic allowed by default
[    0.058776] clocksource: Switched to clocksource arch_sys_counter
[    0.085370] VFS: Disk quotas dquot_6.6.0
[    0.085412] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.085709] AppArmor: AppArmor Filesystem Enabled
[    0.085750] pnp: PnP ACPI: disabled
[    0.089007] NET: Registered PF_INET protocol family
[    0.089166] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.092307] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.092644] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.093277] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.093429] TCP: Hash tables configured (established 524288 bind 65536)
[    0.093675] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[    0.093991] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.094188] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.094420] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.094437] NET: Registered PF_XDP protocol family
[    0.094445] PCI: CLS 0 bytes, default 64
[    0.094615] Trying to unpack rootfs image as initramfs...
[    0.095051] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.095221] kvm [1]: IPA Size Limit: 42 bits
[    0.106510] kvm [1]: vgic interrupt IRQ9
[    0.106688] kvm [1]: Hyp mode initialized successfully
[    0.107626] Initialise system trusted keyrings
[    0.107651] Key type blacklist registered
[    0.107743] workingset: timestamp_bits=40 max_order=24 bucket_order=0
[    0.110516] zbud: loaded
[    0.111326] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.111660] fuse: init (API version 7.34)
[    0.111934] integrity: Platform Keyring initialized
[    0.125788] Key type asymmetric registered
[    0.125806] Asymmetric key parser 'x509' registered
[    0.125862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.125954] io scheduler mq-deadline registered
[    0.130716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.131453] xgene-pcie 1f2b0000.pcie: host bridge /soc/pcie@1f2b0000 ranges:
[    0.131475] xgene-pcie 1f2b0000.pcie:   No bus range found for /soc/pcie@1f2b0000, using [bus 00-ff]
[    0.131496] xgene-pcie 1f2b0000.pcie:       IO 0xc010000000..0xc01000ffff -> 0x0000000000
[    0.131513] xgene-pcie 1f2b0000.pcie:      MEM 0xc120000000..0xc13fffffff -> 0x0020000000
[    0.131530] xgene-pcie 1f2b0000.pcie:      MEM 0xe000000000..0xffffffffff -> 0xe000000000
[    0.131548] xgene-pcie 1f2b0000.pcie:   IB MEM 0x8000000000..0x807fffffff -> 0x8000000000
[    0.131561] xgene-pcie 1f2b0000.pcie:   IB MEM 0x0000000000..0x7fffffffff -> 0x0000000000
[    0.131628] xgene-pcie 1f2b0000.pcie: (rc) x4 gen-3 link up
[    0.131712] xgene-pcie 1f2b0000.pcie: PCI host bridge to bus 0000:00
[    0.131724] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.131731] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.131740] pci_bus 0000:00: root bus resource [mem 0xc120000000-0xc13fffffff] (bus address [0x20000000-0x3fffffff])
[    0.131749] pci_bus 0000:00: root bus resource [mem 0xe000000000-0xffffffffff pref]
[    0.131783] pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400
[    0.131793] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131804] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131816] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131826] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131837] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131845] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131855] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131867] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131895] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    0.131948] pci 0000:00:00.0: supports D1 D2
[    0.132494] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    0.132613] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
[    0.132648] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40003fff 64bit]
[    0.132909] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    0.143197] pci 0000:00:00.0: BAR 14: assigned [mem 0xc120000000-0xc1200fffff]
[    0.143218] pci 0000:01:00.0: BAR 0: assigned [mem 0xc120000000-0xc120003fff 64bit]
[    0.143237] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.143246] pci 0000:00:00.0:   bridge window [mem 0xc120000000-0xc1200fffff]
[    0.143451] pcieport 0000:00:00.0: PME: Signaling with IRQ 59
[    0.148428] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.152529] 10600000.serial: ttyS0 at MMIO 0x10600000 (irq = 27, base_baud = 3125000) is a 16550
[    0.714325] Freeing initrd memory: 101692K
[    0.717704] printk: console [ttyS0] enabled
[    0.718250] msm_serial: driver initialized
[    1.564107] loop: module loaded
[    1.568858] libphy: Fixed MDIO Bus: probed
[    1.573327] tun: Universal TUN/TAP device driver, 1.6
[    1.578732] PPP generic driver version 2.4.2
[    1.583168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.589686] ehci-pci: EHCI PCI platform driver
[    1.594152] ehci-orion: EHCI orion driver
[    1.598208] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.604370] ohci-pci: OHCI PCI platform driver
[    1.608812] uhci_hcd: USB Universal Host Controller Interface driver
[    1.615285] mousedev: PS/2 mouse device common for all mice
[    1.990837] rtc-efi rtc-efi.0: registered as rtc0
[    2.190682] rtc-efi rtc-efi.0: setting system clock to 2021-11-19T04:33:14 UTC (1637296394)
[    2.199192] i2c_dev: i2c /dev entries driver
[    2.204233] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    2.216421] device-mapper: uevent: version 1.0.3
[    2.221128] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    2.229749] cpu cpu0: OPP table can't be empty
[    2.234634] ledtrig-cpu: registered to indicate activity on CPUs
[    2.241550] xgene-pmu 78810000.pmu: X-Gene PMU version 2
[    2.247320] drop_monitor: Initializing network drop monitor service
[    2.253863] NET: Registered PF_INET6 protocol family
[    2.269710] Segment Routing with IPv6
[    2.273378] In-situ OAM (IOAM) with IPv6
[    2.277315] NET: Registered PF_PACKET protocol family
[    2.282412] Key type dns_resolver registered
[    2.287082] registered taskstats version 1
[    2.291317] Loading compiled-in X.509 certificates
[    2.297538] Loaded X.509 cert 'Build time autogenerated kernel key: 6124f8f93d07802ead91be7abf7b2a770f8cea0a'
[    2.307709] zswap: loaded using pool lzo/zbud
[    2.312457] Key type ._fscrypt registered
[    2.316461] Key type .fscrypt registered
[    2.320370] Key type fscrypt-provisioning registered
[    2.365057] cryptd: max_cpu_qlen set to 1000
[    2.385268] Key type encrypted registered
[    2.389271] AppArmor: AppArmor sha1 policy hashing enabled
[    2.394832] ima: No TPM chip found, activating TPM-bypass!
[    2.400304] Loading compiled-in module X.509 certificates
[    2.406979] Loaded X.509 cert 'Build time autogenerated kernel key: 6124f8f93d07802ead91be7abf7b2a770f8cea0a'
[    2.416855] ima: Allocated hash algorithm: sha1
[    2.421382] ima: No architecture policies found
[    2.425918] evm: Initialising EVM extended attributes:
[    2.431035] evm: security.selinux
[    2.434333] evm: security.SMACK64
[    2.437632] evm: security.SMACK64EXEC
[    2.441278] evm: security.SMACK64TRANSMUTE
[    2.445356] evm: security.SMACK64MMAP
[    2.449001] evm: security.apparmor
[    2.452387] evm: security.ima
[    2.455342] evm: security.capability
[    2.458901] evm: HMAC attrs: 0x1
[    2.466481] Freeing unused kernel memory: 8064K
[    2.746185] Checked W+X mappings: passed, no W+X pages found
[    2.751877] Run /init as init process
[    2.755529]   with arguments:
[    2.755533]     /init
[    2.755535]   with environment:
[    2.755537]     HOME=/
[    2.755538]     TERM=linux
[    2.755540]     BOOT_IMAGE=/vmlinuz-5.15.2+
[    3.101232] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.101426] xgene-gpio-sb 17001000.gpio: Support 22 gpios, 8 irqs start from pin 8
[    3.108964] xgene-ahci 1a000000.sata: supply ahci not found, using dummy regulator
[    3.109376] libphy: APM X-Gene MDIO bus: probed
[    3.115700] xgene-gpio-sb 17001000.gpio: X-Gene GPIO Standby driver registered
[    3.135508] xgene-ahci 1a000000.sata: supply phy not found, using dummy regulator
[    3.135807] gpio-dwapb 1c024000.gpio: no IRQ for port0
[    3.156713] xgene-ahci 1a000000.sata: supply target not found, using dummy regulator
[    3.165227] xgene-ahci 1a000000.sata: skip clock and PHY initialization
[    3.171914] xgene-ahci 1a000000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.176764] xhci-hcd 19000000.dwusb: xHCI Host Controller
[    3.180938] xgene-ahci 1a000000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.186930] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 1
[    3.187555] nvme nvme0: pci function 0000:01:00.0
[    3.187588] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    3.187853] i2c i2c-0: Added multiplexed i2c bus 1
[    3.188374] i2c i2c-0: Added multiplexed i2c bus 2
[    3.188677] i2c i2c-0: Added multiplexed i2c bus 3
[    3.188826] i2c i2c-0: Added multiplexed i2c bus 4
[    3.188850] pca954x 0-0071: registered 4 multiplexed busses for I2C switch pca9545
[    3.190465] nvme nvme0: Shutdown timeout set to 10 seconds
[    3.195785] xgene-ahci 1a000000.sata: port 0 can do FBS, forcing FBSCP
[    3.196142] sdhci: Secure Digital Host Controller Interface driver
[    3.196145] sdhci: Copyright(c) Pierre Ossman
[    3.203724] xhci-hcd 19000000.dwusb: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000000010010
[    3.208121] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.213707] xhci-hcd 19000000.dwusb: irq 28, io mem 0x19000000
[    3.254789] mmc0: SDHCI controller on 1c000000.mmc [1c000000.mmc] using PIO
[    3.258767] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.264038] xgene-ahci 1a000000.sata: port 1 can do FBS, forcing FBSCP
[    3.272072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.272077] usb usb1: Product: xHCI Host Controller
[    3.272079] usb usb1: Manufacturer: Linux 5.15.2+ xhci-hcd
[    3.272081] usb usb1: SerialNumber: 19000000.dwusb
[    3.272417] hub 1-0:1.0: USB hub found
[    3.331237] hub 1-0:1.0: 1 port detected
[    3.335433] xhci-hcd 19000000.dwusb: xHCI Host Controller
[    3.335773] scsi host0: xgene-ahci
[    3.340971] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 2
[    3.344595] scsi host1: xgene-ahci
[    3.351780] xhci-hcd 19000000.dwusb: Host supports USB 3.0 SuperSpeed
[    3.355280] ata1: SATA max UDMA/133 mmio [mem 0x1a000000-0x1a000fff] port 0x100 irq 29
[    3.361621] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.369467] ata2: SATA max UDMA/133 mmio [mem 0x1a000000-0x1a000fff] port 0x180 irq 29
[    3.377579] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.385536] xgene-ahci 1a200000.sata: supply ahci not found, using dummy regulator
[    3.393635] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.393639] usb usb2: Product: xHCI Host Controller
[    3.401249] xgene-ahci 1a200000.sata: supply phy not found, using dummy regulator
[    3.408371] usb usb2: Manufacturer: Linux 5.15.2+ xhci-hcd
[    3.413257] xgene-ahci 1a200000.sata: supply target not found, using dummy regulator
[    3.420679] usb usb2: SerialNumber: 19000000.dwusb
[    3.426176] xgene-ahci 1a200000.sata: skip clock and PHY initialization
[    3.434113] hub 2-0:1.0: USB hub found
[    3.438681] xgene-ahci 1a200000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.445251] hub 2-0:1.0: 1 port detected
[    3.446700] xgene-enet 1f620000.ethernet: IRQ index 8 not found
[    3.448958] xgene-ahci 1a200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.477146] xgene-ahci 1a200000.sata: port 0 can do FBS, forcing FBSCP
[    3.483856] xgene-ahci 1a200000.sata: port 1 can do FBS, forcing FBSCP
[    3.491281] scsi host2: xgene-ahci
[    3.493472] nvme nvme0: 8/0/0 default/read/poll queues
[    3.494973] scsi host3: xgene-ahci
[    3.503425] ata3: SATA max UDMA/133 mmio [mem 0x1a200000-0x1a200fff] port 0x100 irq 30
[    3.503956]  nvme0n1: p1 p2 p3
[    3.511317] ata4: SATA max UDMA/133 mmio [mem 0x1a200000-0x1a200fff] port 0x180 irq 30
[    3.522352] xgene-ahci 1a400000.sata: supply ahci not found, using dummy regulator
[    3.530009] xgene-ahci 1a400000.sata: supply phy not found, using dummy regulator
[    3.537517] xgene-ahci 1a400000.sata: supply target not found, using dummy regulator
[    3.545340] xgene-ahci 1a400000.sata: skip clock and PHY initialization
[    3.551994] xgene-ahci 1a400000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.561017] xgene-ahci 1a400000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.570392] xgene-ahci 1a400000.sata: port 0 can do FBS, forcing FBSCP
[    3.576998] xgene-ahci 1a400000.sata: port 1 can do FBS, forcing FBSCP
[    3.584199] scsi host4: xgene-ahci
[    3.587856] scsi host5: xgene-ahci
[    3.591598] ata5: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x100 irq 31
[    3.599499] ata6: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x180 irq 31
[    3.607402] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    3.697105] ata2: SATA link down (SStatus 0 SControl 300)
[    3.759057] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[    3.767206] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.774312] usb 1-1: SerialNumber: 6B060861B5A0
[    3.836957] ata4: SATA link down (SStatus 0 SControl 300)
[    3.841725] hub 1-1:1.0: USB hub found
[    3.842360] ata3: SATA link down (SStatus 0 SControl 300)
[    3.846114] hub 1-1:1.0: 4 ports detected
[    3.862783] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.869170] ata1.00: supports DRM functions and may not be fully accessible
[    3.876104] ata1.00: ATA-11: Samsung SSD 870 EVO 2TB, SVT01B6Q, max UDMA/133
[    3.883126] ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32)
[    3.890726] ata1.00: Features: Trust
[    3.894545] ata1.00: supports DRM functions and may not be fully accessible
[    3.902533] ata1.00: configured for UDMA/133
[    3.906973] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 870  1B6Q PQ: 0 ANSI: 5
[    3.915374] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.915411] ata1.00: Enabling discard_zeroes_data
[    3.920101] ata6: SATA link down (SStatus 0 SControl 300)
[    3.923266] ata5: SATA link down (SStatus 0 SControl 300)
[    3.925446] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.943831] sd 0:0:0:0: [sda] Write Protect is off
[    3.948609] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.948640] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.971319] ata1.00: Enabling discard_zeroes_data
[    3.995315] ata1.00: Enabling discard_zeroes_data
[    4.027774] sd 0:0:0:0: [sda] supports TCG Opal
[    4.032291] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.063665] random: lvm: uninitialized urandom read (4 bytes read)
[    4.086906] random: lvm: uninitialized urandom read (2 bytes read)
[    4.598780] usb 1-1.2: new high-speed USB device number 3 using xhci-hcd
[    4.734054] usb 1-1.2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.00
[    4.742376] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.749656] usb 1-1.2: Product: DataTraveler 3.0
[    4.754254] usb 1-1.2: Manufacturer: Kingston
[    4.758594] usb 1-1.2: SerialNumber: 08606E6B6612BE50D7168119
[    4.771561] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    4.778068] scsi host6: usb-storage 1-1.2:1.0
[    4.782587] usbcore: registered new interface driver usb-storage
[    4.790928] usbcore: registered new interface driver uas
[    5.414777] raid6: neonx8   gen()  3157 MB/s
[    5.486774] raid6: neonx8   xor()  2512 MB/s
[    5.558772] raid6: neonx4   gen()  3334 MB/s
[    5.630774] raid6: neonx4   xor()  2668 MB/s
[    5.702775] raid6: neonx2   gen()  3446 MB/s
[    5.774771] raid6: neonx2   xor()  2670 MB/s
[    5.846776] raid6: neonx1   gen()  3498 MB/s
[    5.851129] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    5.859562] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    5.918772] raid6: neonx1   xor()  2829 MB/s
[    5.990775] raid6: int64x8  gen()  3459 MB/s
[    6.062771] raid6: int64x8  xor()  1801 MB/s
[    6.134772] raid6: int64x4  gen()  3532 MB/s
[    6.206771] raid6: int64x4  xor()  1868 MB/s
[    6.278771] raid6: int64x2  gen()  3221 MB/s
[    6.350773] raid6: int64x2  xor()  1635 MB/s
[    6.422777] raid6: int64x1  gen()  2284 MB/s
[    6.494779] raid6: int64x1  xor()  1240 MB/s
[    6.499031] raid6: using algorithm int64x4 gen() 3532 MB/s
[    6.504492] raid6: .... xor() 1868 MB/s, rmw enabled
[    6.509435] raid6: using neon recovery algorithm
[    6.517523] xor: measuring software checksum speed
[    6.523393]    8regs           :  9108 MB/sec
[    6.528816]    32regs          :  9075 MB/sec
[    6.534549]    arm64_neon      :  7062 MB/sec
[    6.538887] xor: using function: 8regs (9108 MB/sec)
[    6.545600] async_tx: api initialized (async)
[    6.577230] random: fast init done
[    6.620760] sd 6:0:0:0: [sdb] 15360000 512-byte logical blocks: (7.86 GB/7.32 GiB)
[    6.630259] sd 6:0:0:0: [sdb] Write Protect is off
[    6.635041] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    6.637008] sd 6:0:0:0: [sdb] No Caching mode page found
[    6.642320] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    6.665964] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[    6.738653] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    6.750725]  sdb: sdb1 sdb2
[    6.758651] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    7.139265] systemd[1]: Inserted module 'autofs4'
[    7.159541] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    7.182422] systemd[1]: Detected architecture arm64.
[    7.230999] systemd[1]: Set hostname to <entak>.
[    7.274471] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    7.829121] random: systemd: uninitialized urandom read (16 bytes read)
[    7.837764] systemd[1]: Created slice system-modprobe.slice.
[    7.858833] random: systemd: uninitialized urandom read (16 bytes read)
[    7.866272] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.891656] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.915757] systemd[1]: Created slice User and Session Slice.
[    7.938981] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.963247] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.990960] systemd[1]: Reached target User and Group Name Lookups.
[    8.014862] systemd[1]: Reached target Slices.
[    8.035008] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.059048] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.082977] systemd[1]: Listening on multipathd control socket.
[    8.107049] systemd[1]: Listening on Syslog Socket.
[    8.127042] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.150942] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.175243] systemd[1]: Listening on Journal Audit Socket.
[    8.195034] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.219081] systemd[1]: Listening on Journal Socket.
[    8.239112] systemd[1]: Listening on Network Service Netlink Socket.
[    8.263064] systemd[1]: Listening on udev Control Socket.
[    8.282987] systemd[1]: Listening on udev Kernel Socket.
[    8.305124] systemd[1]: Mounting Huge Pages File System...
[    8.329036] systemd[1]: Mounting POSIX Message Queue File System...
[    8.353062] systemd[1]: Mounting Kernel Debug File System...
[    8.376998] systemd[1]: Mounting Kernel Trace File System...
[    8.401741] systemd[1]: Starting Journal Service...
[    8.425850] systemd[1]: Starting Set the console keyboard layout...
[    8.449592] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    8.477178] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.505109] systemd[1]: Starting Load Kernel Module drm...
[    8.530923] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
[    8.541040] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    8.550131] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    8.562068] systemd[1]: Starting Load Kernel Modules...
[    8.585043] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.599798] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null). Quota mode: none.
[    8.613114] systemd[1]: Starting udev Coldplug all Devices...
[    8.637129] systemd[1]: Starting Uncomplicated firewall...
[    8.666326] systemd[1]: Started Journal Service.
[    8.941478] systemd-journald[483]: Received client request to flush runtime journal.
[    9.427295] pstore: Using crash dump compression: deflate
[    9.427309] pstore: Registered efi as persistent store backend
[    9.475005] xgene-slimpro-mbox 10540000.slimpro-mbox: APM X-Gene SLIMpro MailBox registered
[    9.478086] EDAC MC0: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
[    9.478098] xgene-edac 78800000.edac: X-Gene EDAC MC registered
[    9.480787] EDAC MC1: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
[    9.480798] xgene-edac 78800000.edac: X-Gene EDAC MC registered
[    9.483307] xgene-slimpro-i2c soc:i2cslimpro: Mailbox I2C Adapter registered
[    9.489743] EDAC MC2: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
[    9.489756] xgene-edac 78800000.edac: X-Gene EDAC MC registered
[    9.489857] EDAC MC3: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
[    9.489866] xgene-edac 78800000.edac: X-Gene EDAC MC registered
[    9.489947] EDAC DEVICE0: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
[    9.489953] xgene-edac 78800000.edac: X-Gene EDAC PMD0 registered
[    9.490007] EDAC DEVICE1: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
[    9.490013] xgene-edac 78800000.edac: X-Gene EDAC PMD1 registered
[    9.490049] EDAC DEVICE2: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
[    9.490055] xgene-edac 78800000.edac: X-Gene EDAC PMD2 registered
[    9.490090] EDAC DEVICE3: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
[    9.490096] xgene-edac 78800000.edac: X-Gene EDAC PMD3 registered
[    9.490138] EDAC DEVICE4: Giving out device to module xgene_edac controller xgene_l3_err: DEV xgene_l3_err (INTERRUPT)
[    9.490143] xgene-edac 78800000.edac: X-Gene EDAC L3 registered
[    9.490171] EDAC DEVICE5: Giving out device to module xgene_edac controller xgene_soc_err: DEV xgene_soc_err (INTERRUPT)
[    9.490176] xgene-edac 78800000.edac: X-Gene EDAC SoC registered
[    9.579143] xgene-slimpro-hwmon soc:hwmonslimpro: APM X-Gene SoC HW monitor driver registered
[    9.837664] Adding 4194300k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:4194300k SSFS
[    9.991543] random: crng init done
[    9.991549] random: 5 urandom warning(s) missed due to ratelimiting
[   10.012063] alua: device handler registered
[   10.014056] emc: device handler registered
[   10.016151] rdac: device handler registered
[   10.118911] loop0: detected capacity change from 0 to 100152
[   10.146997] loop1: detected capacity change from 0 to 126880
[   10.175167] loop2: detected capacity change from 0 to 57488
[   10.846753] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   11.017821] audit: type=1400 audit(1637296403.324:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=728 comm="apparmor_parser"
[   11.019075] audit: type=1400 audit(1637296403.328:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=723 comm="apparmor_parser"
[   11.019086] audit: type=1400 audit(1637296403.328:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=723 comm="apparmor_parser"
[   11.019370] audit: type=1400 audit(1637296403.328:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=722 comm="apparmor_parser"
[   11.019377] audit: type=1400 audit(1637296403.328:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=722 comm="apparmor_parser"
[   11.019383] audit: type=1400 audit(1637296403.328:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=722 comm="apparmor_parser"
[   11.024416] audit: type=1400 audit(1637296403.332:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=724 comm="apparmor_parser"
[   11.024861] audit: type=1400 audit(1637296403.332:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=727 comm="apparmor_parser"
[   11.024870] audit: type=1400 audit(1637296403.332:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=727 comm="apparmor_parser"
[   11.028413] audit: type=1400 audit(1637296403.336:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[   12.557033] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   12.568655] br0: port 1(eth1) entered blocking state
[   12.568664] br0: port 1(eth1) entered disabled state
[   12.568770] device eth1 entered promiscuous mode
[   12.570247] br0: port 1(eth1) entered blocking state
[   12.570256] br0: port 1(eth1) entered forwarding state
[   12.570290] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   13.566888] br0: port 1(eth1) entered disabled state
[   14.590801] xgene-enet 1f620000.ethernet eth1: Link is Up - 10Gbps
[   14.590884] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   14.590927] br0: port 1(eth1) entered blocking state
[   14.590934] br0: port 1(eth1) entered forwarding state
[   50.755464] loop3: detected capacity change from 0 to 8