gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x501f0000]
[    0.000000] Linux version 5.15.2+ (ubuntu@c2400) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP Wed Nov 17 21:09:01 UTC 2021
[    0.000000] Machine model: APM X-Gene Merlin board
[    0.000000] efi: EFI v2.40 by X-Gene Merlin Board EFI Aug 19 2016 18:09:46
[    0.000000] efi: ACPI=0x4ffa808000 ACPI 2.0=0x4ffa808014 SMBIOS 3.0=0x4ffa806000 ESRT=0x4fff039818 MEMRESERVE=0x4ffa3e1d18 
[    0.000000] esrt: Reserving ESRT space from 0x0000004fff039818 to 0x0000004fff039878.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x4ff7d27340-0x4ff7d2bfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000004000000000-0x00000040001fffff]
[    0.000000]   node   0: [mem 0x0000004000200000-0x0000004ffa7b9fff]
[    0.000000]   node   0: [mem 0x0000004ffa7ba000-0x0000004ffa7f2fff]
[    0.000000]   node   0: [mem 0x0000004ffa7f3000-0x0000004ffa7fcfff]
[    0.000000]   node   0: [mem 0x0000004ffa7fd000-0x0000004ffa7fdfff]
[    0.000000]   node   0: [mem 0x0000004ffa7fe000-0x0000004ffa804fff]
[    0.000000]   node   0: [mem 0x0000004ffa805000-0x0000004ffa806fff]
[    0.000000]   node   0: [mem 0x0000004ffa807000-0x0000004ffa808fff]
[    0.000000]   node   0: [mem 0x0000004ffa809000-0x0000004ffa9ecfff]
[    0.000000]   node   0: [mem 0x0000004ffa9ed000-0x0000004fff9b0fff]
[    0.000000]   node   0: [mem 0x0000004fff9b1000-0x0000004fff9f6fff]
[    0.000000]   node   0: [mem 0x0000004fff9f7000-0x0000004fffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000] cma: Reserved 32 MiB at 0x0000004000400000
[    0.000000] percpu: Embedded 30 pages/cpu s83032 r8192 d31656 u122880
[    0.000000] pcpu-alloc: s83032 r8192 d31656 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16515072
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.15.2+ root=UUID=e2d960f2-c915-4b52-ad54-530d929f19cd ro swapaccount=1 compat_uts_machine=armv7l pci=noaer
[    0.000000] Unknown command line parameters: BOOT_IMAGE=/vmlinuz-5.15.2+ compat_uts_machine=armv7l
[    0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 65647808K/67108864K available (15872K kernel code, 3702K rwdata, 13720K rodata, 8064K init, 1181K bss, 1428288K reserved, 32768K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x30/0x4d8 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 52445 entries in 205 pages
[    0.000000] ftrace: allocated 205 pages with 5 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Adjusting CPU interface base to 0x00000000780af000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] GICv2m: range[mem 0x79000000-0x79000fff], SPI[224:231]
[    0.000000] GICv2m: range[mem 0x79010000-0x79010fff], SPI[232:239]
[    0.000000] GICv2m: range[mem 0x79020000-0x79020fff], SPI[240:247]
[    0.000000] GICv2m: range[mem 0x79030000-0x79030fff], SPI[248:255]
[    0.000000] GICv2m: range[mem 0x79040000-0x79040fff], SPI[256:263]
[    0.000000] GICv2m: range[mem 0x79050000-0x79050fff], SPI[264:271]
[    0.000000] GICv2m: range[mem 0x79060000-0x79060fff], SPI[272:279]
[    0.000000] GICv2m: range[mem 0x79070000-0x79070fff], SPI[280:287]
[    0.000000] GICv2m: range[mem 0x79080000-0x79080fff], SPI[288:295]
[    0.000000] GICv2m: range[mem 0x79090000-0x79090fff], SPI[296:303]
[    0.000000] GICv2m: range[mem 0x790a0000-0x790a0fff], SPI[304:311]
[    0.000000] GICv2m: range[mem 0x790b0000-0x790b0fff], SPI[312:319]
[    0.000000] GICv2m: range[mem 0x790c0000-0x790c0fff], SPI[320:327]
[    0.000000] GICv2m: range[mem 0x790d0000-0x790d0fff], SPI[328:335]
[    0.000000] GICv2m: range[mem 0x790e0000-0x790e0fff], SPI[336:343]
[    0.000000] GICv2m: range[mem 0x790f0000-0x790f0fff], SPI[344:351]
[    0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[    0.000000] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[    0.000203] Console: colour dummy device 80x25
[    0.000374] printk: console [tty0] enabled
[    0.000423] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
[    0.000433] pid_max: default: 32768 minimum: 301
[    0.000483] LSM: Security Framework initializing
[    0.000497] Yama: becoming mindful.
[    0.000541] AppArmor: AppArmor initialized
[    0.000649] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000719] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.001563] rcu: Hierarchical SRCU implementation.
[    0.002473] Remapping and enabling EFI services.
[    0.002806] smp: Bringing up secondary CPUs ...
[    0.003052] Detected PIPT I-cache on CPU1
[    0.003084] CPU1: Booted secondary processor 0x0000000001 [0x501f0000]
[    0.003389] Detected PIPT I-cache on CPU2
[    0.003413] CPU2: Booted secondary processor 0x0000000100 [0x501f0000]
[    0.003680] Detected PIPT I-cache on CPU3
[    0.003697] CPU3: Booted secondary processor 0x0000000101 [0x501f0000]
[    0.003968] Detected PIPT I-cache on CPU4
[    0.003992] CPU4: Booted secondary processor 0x0000000200 [0x501f0000]
[    0.004277] Detected PIPT I-cache on CPU5
[    0.004294] CPU5: Booted secondary processor 0x0000000201 [0x501f0000]
[    0.004566] Detected PIPT I-cache on CPU6
[    0.004591] CPU6: Booted secondary processor 0x0000000300 [0x501f0000]
[    0.004869] Detected PIPT I-cache on CPU7
[    0.004886] CPU7: Booted secondary processor 0x0000000301 [0x501f0000]
[    0.004929] smp: Brought up 1 node, 8 CPUs
[    0.004952] SMP: Total of 8 processors activated.
[    0.004957] CPU features: detected: 32-bit EL0 Support
[    0.004960] CPU features: detected: 32-bit EL1 Support
[    0.004965] CPU features: detected: CRC32 instructions
[    0.005042] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.014404] CPU: All CPU(s) started at EL2
[    0.014450] alternatives: patching kernel code
[    0.025703] devtmpfs: initialized
[    0.039176] Registered cp15_barrier emulation handler
[    0.039192] Registered setend emulation handler
[    0.039198] KASLR disabled due to lack of seed
[    0.039286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.039305] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.039794] pinctrl core: initialized pinctrl subsystem
[    0.040192] SMBIOS 3.0.0 present.
[    0.040205] DMI: AppliedMicro X-Gene Merlin Board/X-Gene Merlin Board, BIOS 3.06.15 Aug 19 2016
[    0.040476] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.041572] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.042078] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.042580] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.042606] audit: initializing netlink subsys (disabled)
[    0.042683] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.043116] thermal_sys: Registered thermal governor 'fair_share'
[    0.043120] thermal_sys: Registered thermal governor 'bang_bang'
[    0.043127] thermal_sys: Registered thermal governor 'step_wise'
[    0.043131] thermal_sys: Registered thermal governor 'user_space'
[    0.043135] thermal_sys: Registered thermal governor 'power_allocator'
[    0.043184] cpuidle: using governor ladder
[    0.043199] cpuidle: using governor menu
[    0.043261] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.043357] ASID allocator initialised with 32768 entries
[    0.043773] Serial: AMBA PL011 UART driver
[    0.053571] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.053581] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.053586] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.053591] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.056260] fbcon: Taking over console
[    0.056283] ACPI: Interpreter disabled.
[    0.056664] iommu: Default domain type: Translated 
[    0.056672] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.056796] vgaarb: loaded
[    0.057205] SCSI subsystem initialized
[    0.057278] libata version 3.00 loaded.
[    0.057352] usbcore: registered new interface driver usbfs
[    0.057375] usbcore: registered new interface driver hub
[    0.057394] usbcore: registered new device driver usb
[    0.057749] pps_core: LinuxPPS API ver. 1 registered
[    0.057756] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.057768] PTP clock support registered
[    0.057861] EDAC MC: Ver: 3.0.0
[    0.058188] Registered efivars operations
[    0.058727] NetLabel: Initializing
[    0.058735] NetLabel:  domain hash size = 128
[    0.058738] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.058769] NetLabel:  unlabeled traffic allowed by default
[    0.059031] clocksource: Switched to clocksource arch_sys_counter
[    0.085639] VFS: Disk quotas dquot_6.6.0
[    0.085680] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.085975] AppArmor: AppArmor Filesystem Enabled
[    0.086016] pnp: PnP ACPI: disabled
[    0.089200] NET: Registered PF_INET protocol family
[    0.089359] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.092497] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.092832] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.093464] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.093615] TCP: Hash tables configured (established 524288 bind 65536)
[    0.093861] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[    0.094179] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.094377] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.094608] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.094625] NET: Registered PF_XDP protocol family
[    0.094633] PCI: CLS 0 bytes, default 64
[    0.094804] Trying to unpack rootfs image as initramfs...
[    0.095252] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.095425] kvm [1]: IPA Size Limit: 42 bits
[    0.106626] kvm [1]: vgic interrupt IRQ9
[    0.106805] kvm [1]: Hyp mode initialized successfully
[    0.107739] Initialise system trusted keyrings
[    0.107763] Key type blacklist registered
[    0.107857] workingset: timestamp_bits=40 max_order=24 bucket_order=0
[    0.110601] zbud: loaded
[    0.111434] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.111800] fuse: init (API version 7.34)
[    0.112081] integrity: Platform Keyring initialized
[    0.125975] Key type asymmetric registered
[    0.125993] Asymmetric key parser 'x509' registered
[    0.126049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.126140] io scheduler mq-deadline registered
[    0.131105] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.131839] xgene-pcie 1f2b0000.pcie: host bridge /soc/pcie@1f2b0000 ranges:
[    0.131859] xgene-pcie 1f2b0000.pcie:   No bus range found for /soc/pcie@1f2b0000, using [bus 00-ff]
[    0.131880] xgene-pcie 1f2b0000.pcie:       IO 0xc010000000..0xc01000ffff -> 0x0000000000
[    0.131898] xgene-pcie 1f2b0000.pcie:      MEM 0xc120000000..0xc13fffffff -> 0x0020000000
[    0.131913] xgene-pcie 1f2b0000.pcie:      MEM 0xe000000000..0xffffffffff -> 0xe000000000
[    0.131929] xgene-pcie 1f2b0000.pcie:   IB MEM 0x8000000000..0x807fffffff -> 0x8000000000
[    0.131940] xgene-pcie 1f2b0000.pcie:   IB MEM 0x0000000000..0x7fffffffff -> 0x0000000000
[    0.132023] xgene-pcie 1f2b0000.pcie: (rc) x4 gen-3 link up
[    0.132112] xgene-pcie 1f2b0000.pcie: PCI host bridge to bus 0000:00
[    0.132123] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.132130] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.132140] pci_bus 0000:00: root bus resource [mem 0xc120000000-0xc13fffffff] (bus address [0x20000000-0x3fffffff])
[    0.132148] pci_bus 0000:00: root bus resource [mem 0xe000000000-0xffffffffff pref]
[    0.132182] pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400
[    0.132193] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.132204] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.132217] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.132226] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.132235] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.132244] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.132253] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.132264] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.132292] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    0.132342] pci 0000:00:00.0: supports D1 D2
[    0.132883] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    0.132993] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
[    0.133029] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40003fff 64bit]
[    0.133289] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    0.143447] pci 0000:00:00.0: BAR 14: assigned [mem 0xc120000000-0xc1200fffff]
[    0.143469] pci 0000:01:00.0: BAR 0: assigned [mem 0xc120000000-0xc120003fff 64bit]
[    0.143489] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.143498] pci 0000:00:00.0:   bridge window [mem 0xc120000000-0xc1200fffff]
[    0.143704] pcieport 0000:00:00.0: PME: Signaling with IRQ 59
[    0.151880] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.156428] 10600000.serial: ttyS0 at MMIO 0x10600000 (irq = 27, base_baud = 3125000) is a 16550
[    0.717879] Freeing initrd memory: 101704K
[    0.723321] printk: console [ttyS0] enabled
[    1.565210] msm_serial: driver initialized
[    1.574880] loop: module loaded
[    1.579010] libphy: Fixed MDIO Bus: probed
[    1.583483] tun: Universal TUN/TAP device driver, 1.6
[    1.588892] PPP generic driver version 2.4.2
[    1.593329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.599843] ehci-pci: EHCI PCI platform driver
[    1.604309] ehci-orion: EHCI orion driver
[    1.608358] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.614518] ohci-pci: OHCI PCI platform driver
[    1.618960] uhci_hcd: USB Universal Host Controller Interface driver
[    1.625436] mousedev: PS/2 mouse device common for all mice
[    1.985991] rtc-efi rtc-efi.0: registered as rtc0
[    2.179843] rtc-efi rtc-efi.0: setting system clock to 2021-11-18T15:53:26 UTC (1637250806)
[    2.188362] i2c_dev: i2c /dev entries driver
[    2.193398] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    2.205587] device-mapper: uevent: version 1.0.3
[    2.210295] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    2.218918] cpu cpu0: OPP table can't be empty
[    2.223812] ledtrig-cpu: registered to indicate activity on CPUs
[    2.230729] xgene-pmu 78810000.pmu: X-Gene PMU version 2
[    2.236501] drop_monitor: Initializing network drop monitor service
[    2.243059] NET: Registered PF_INET6 protocol family
[    2.259719] Segment Routing with IPv6
[    2.263390] In-situ OAM (IOAM) with IPv6
[    2.267328] NET: Registered PF_PACKET protocol family
[    2.272444] Key type dns_resolver registered
[    2.277104] registered taskstats version 1
[    2.281342] Loading compiled-in X.509 certificates
[    2.287567] Loaded X.509 cert 'Build time autogenerated kernel key: 0d3bc49b49ccd6d58068fc839745d706e96bd76a'
[    2.297752] zswap: loaded using pool lzo/zbud
[    2.302478] Key type ._fscrypt registered
[    2.306480] Key type .fscrypt registered
[    2.310386] Key type fscrypt-provisioning registered
[    2.355425] cryptd: max_cpu_qlen set to 1000
[    2.375938] Key type encrypted registered
[    2.379945] AppArmor: AppArmor sha1 policy hashing enabled
[    2.385491] ima: No TPM chip found, activating TPM-bypass!
[    2.390962] Loading compiled-in module X.509 certificates
[    2.397632] Loaded X.509 cert 'Build time autogenerated kernel key: 0d3bc49b49ccd6d58068fc839745d706e96bd76a'
[    2.407510] ima: Allocated hash algorithm: sha1
[    2.412043] ima: No architecture policies found
[    2.416582] evm: Initialising EVM extended attributes:
[    2.421701] evm: security.selinux
[    2.425002] evm: security.SMACK64
[    2.428303] evm: security.SMACK64EXEC
[    2.431949] evm: security.SMACK64TRANSMUTE
[    2.436028] evm: security.SMACK64MMAP
[    2.439673] evm: security.apparmor
[    2.443060] evm: security.ima
[    2.446011] evm: security.capability
[    2.449569] evm: HMAC attrs: 0x1
[    2.457208] Freeing unused kernel memory: 8064K
[    2.742480] Checked W+X mappings: passed, no W+X pages found
[    2.748150] Run /init as init process
[    2.751798]   with arguments:
[    2.751801]     /init
[    2.751803]   with environment:
[    2.751805]     HOME=/
[    2.751807]     TERM=linux
[    2.751809]     BOOT_IMAGE=/vmlinuz-5.15.2+
[    2.751811]     compat_uts_machine=armv7l
[    3.038724] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.080977] sdhci: Secure Digital Host Controller Interface driver
[    3.087173] sdhci: Copyright(c) Pierre Ossman
[    3.104994] xgene-gpio-sb 17001000.gpio: Support 22 gpios, 8 irqs start from pin 8
[    3.114485] xgene-gpio-sb 17001000.gpio: X-Gene GPIO Standby driver registered
[    3.114614] gpio-dwapb 1c024000.gpio: no IRQ for port0
[    3.129777] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.130351] libphy: APM X-Gene MDIO bus: probed
[    3.156040] xgene-ahci 1a000000.sata: supply ahci not found, using dummy regulator
[    3.186858] xgene-ahci 1a000000.sata: supply phy not found, using dummy regulator
[    3.223278] xgene-ahci 1a000000.sata: supply target not found, using dummy regulator
[    3.233250] xgene-ahci 1a000000.sata: skip clock and PHY initialization
[    3.239899] xgene-ahci 1a000000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.248497] xhci-hcd 19000000.dwusb: xHCI Host Controller
[    3.248927] xgene-ahci 1a000000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.254419] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 1
[    3.263649] xgene-ahci 1a000000.sata: port 0 can do FBS, forcing FBSCP
[    3.271044] mmc0: SDHCI controller on 1c000000.mmc [1c000000.mmc] using PIO
[    3.271247] xhci-hcd 19000000.dwusb: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000000010010
[    3.287805] i2c i2c-0: Added multiplexed i2c bus 1
[    3.293975] xhci-hcd 19000000.dwusb: irq 28, io mem 0x19000000
[    3.299284] xgene-ahci 1a000000.sata: port 1 can do FBS, forcing FBSCP
[    3.304734] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.316632] i2c i2c-0: Added multiplexed i2c bus 2
[    3.319232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.330999] nvme nvme0: pci function 0000:01:00.0
[    3.331011] i2c i2c-0: Added multiplexed i2c bus 3
[    3.331205] usb usb1: Product: xHCI Host Controller
[    3.331486] i2c i2c-0: Added multiplexed i2c bus 4
[    3.331493] pca954x 0-0071: registered 4 multiplexed busses for I2C switch pca9545
[    3.335922] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    3.340664] usb usb1: Manufacturer: Linux 5.15.2+ xhci-hcd
[    3.340668] usb usb1: SerialNumber: 19000000.dwusb
[    3.347637] nvme nvme0: Shutdown timeout set to 10 seconds
[    3.351099] hub 1-0:1.0: USB hub found
[    3.358658] scsi host0: xgene-ahci
[    3.363631] hub 1-0:1.0: 1 port detected
[    3.369794] scsi host1: xgene-ahci
[    3.374876] xhci-hcd 19000000.dwusb: xHCI Host Controller
[    3.380053] ata1: SATA max UDMA/133 mmio [mem 0x1a000000-0x1a000fff] port 0x100 irq 29
[    3.383083] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 2
[    3.386452] ata2: SATA max UDMA/133 mmio [mem 0x1a000000-0x1a000fff] port 0x180 irq 29
[    3.390385] xhci-hcd 19000000.dwusb: Host supports USB 3.0 SuperSpeed
[    3.393913] xgene-ahci 1a200000.sata: supply ahci not found, using dummy regulator
[    3.399225] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.407255] xgene-ahci 1a200000.sata: supply phy not found, using dummy regulator
[    3.414718] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.422586] xgene-ahci 1a200000.sata: supply target not found, using dummy regulator
[    3.428938] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.436525] xgene-ahci 1a200000.sata: skip clock and PHY initialization
[    3.444531] usb usb2: Product: xHCI Host Controller
[    3.452016] xgene-ahci 1a200000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.460208] usb usb2: Manufacturer: Linux 5.15.2+ xhci-hcd
[    3.467918] xgene-ahci 1a200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.475107] usb usb2: SerialNumber: 19000000.dwusb
[    3.481694] xgene-ahci 1a200000.sata: port 0 can do FBS, forcing FBSCP
[    3.486824] hub 2-0:1.0: USB hub found
[    3.525405] hub 2-0:1.0: 1 port detected
[    3.529579] xgene-ahci 1a200000.sata: port 1 can do FBS, forcing FBSCP
[    3.536927] scsi host2: xgene-ahci
[    3.540714] scsi host3: xgene-ahci
[    3.542394] nvme nvme0: 8/0/0 default/read/poll queues
[    3.543748] xgene-enet 1f620000.ethernet: IRQ index 8 not found
[    3.544221] ata3: SATA max UDMA/133 mmio [mem 0x1a200000-0x1a200fff] port 0x100 irq 30
[    3.553447]  nvme0n1: p1 p2 p3 p4
[    3.555141] ata4: SATA max UDMA/133 mmio [mem 0x1a200000-0x1a200fff] port 0x180 irq 30
[    3.574349] xgene-ahci 1a400000.sata: supply ahci not found, using dummy regulator
[    3.581997] xgene-ahci 1a400000.sata: supply phy not found, using dummy regulator
[    3.589523] xgene-ahci 1a400000.sata: supply target not found, using dummy regulator
[    3.597314] xgene-ahci 1a400000.sata: skip clock and PHY initialization
[    3.603952] xgene-ahci 1a400000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.612971] xgene-ahci 1a400000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.622352] xgene-ahci 1a400000.sata: port 0 can do FBS, forcing FBSCP
[    3.628953] xgene-ahci 1a400000.sata: port 1 can do FBS, forcing FBSCP
[    3.635039] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    3.642570] scsi host4: xgene-ahci
[    3.646301] scsi host5: xgene-ahci
[    3.649837] ata5: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x100 irq 31
[    3.657730] ata6: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x180 irq 31
[    3.711735] ata2: SATA link down (SStatus 0 SControl 300)
[    3.787324] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[    3.795475] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.802582] usb 1-1: SerialNumber: 6B060861B5A0
[    3.847491] hub 1-1:1.0: USB hub found
[    3.851305] hub 1-1:1.0: 4 ports detected
[    3.867050] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.873444] ata1.00: supports DRM functions and may not be fully accessible
[    3.880379] ata1.00: ATA-11: Samsung SSD 870 EVO 2TB, SVT01B6Q, max UDMA/133
[    3.887401] ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32)
[    3.889216] ata4: SATA link down (SStatus 0 SControl 300)
[    3.895007] ata1.00: Features: Trust
[    3.899298] ata3: SATA link down (SStatus 0 SControl 300)
[    3.903099] ata1.00: supports DRM functions and may not be fully accessible
[    3.916213] ata1.00: configured for UDMA/133
[    3.920653] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 870  1B6Q PQ: 0 ANSI: 5
[    3.929035] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.929060] ata1.00: Enabling discard_zeroes_data
[    3.939113] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.946843] sd 0:0:0:0: [sda] Write Protect is off
[    3.951617] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.951646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.975577] ata1.00: Enabling discard_zeroes_data
[    3.977251] ata5: SATA link down (SStatus 0 SControl 300)
[    3.985661] ata6: SATA link down (SStatus 0 SControl 300)
[    4.015570] ata1.00: Enabling discard_zeroes_data
[    4.048018] sd 0:0:0:0: [sda] supports TCG Opal
[    4.052535] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.077824] random: fast init done
[    4.081634] random: lvm: uninitialized urandom read (4 bytes read)
[    4.090176] random: lvm: uninitialized urandom read (4 bytes read)
[    4.105541] random: lvm: uninitialized urandom read (2 bytes read)
[    4.599036] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[    4.734370] usb 1-1.1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.00
[    4.742694] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.749973] usb 1-1.1: Product: DataTraveler 3.0
[    4.754571] usb 1-1.1: Manufacturer: Kingston
[    4.758910] usb 1-1.1: SerialNumber: 08606E6B6612BE50D7168119
[    4.772093] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    4.778593] scsi host6: usb-storage 1-1.1:1.0
[    4.783129] usbcore: registered new interface driver usb-storage
[    4.791444] usbcore: registered new interface driver uas
[    5.455027] raid6: neonx8   gen()  3157 MB/s
[    5.527029] raid6: neonx8   xor()  2514 MB/s
[    5.599029] raid6: neonx4   gen()  3334 MB/s
[    5.671028] raid6: neonx4   xor()  2668 MB/s
[    5.743028] raid6: neonx2   gen()  3446 MB/s
[    5.815028] raid6: neonx2   xor()  2670 MB/s
[    5.850110] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    5.858534] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    5.887032] raid6: neonx1   gen()  3494 MB/s
[    5.959026] raid6: neonx1   xor()  2834 MB/s
[    6.031031] raid6: int64x8  gen()  3460 MB/s
[    6.103031] raid6: int64x8  xor()  1801 MB/s
[    6.175027] raid6: int64x4  gen()  3532 MB/s
[    6.247027] raid6: int64x4  xor()  1868 MB/s
[    6.319030] raid6: int64x2  gen()  3221 MB/s
[    6.391025] raid6: int64x2  xor()  1635 MB/s
[    6.463027] raid6: int64x1  gen()  2284 MB/s
[    6.535031] raid6: int64x1  xor()  1240 MB/s
[    6.539283] raid6: using algorithm int64x4 gen() 3532 MB/s
[    6.544744] raid6: .... xor() 1868 MB/s, rmw enabled
[    6.549685] raid6: using neon recovery algorithm
[    6.557731] xor: measuring software checksum speed
[    6.563608]    8regs           :  9109 MB/sec
[    6.569032]    32regs          :  9075 MB/sec
[    6.574762]    arm64_neon      :  7067 MB/sec
[    6.579100] xor: using function: 8regs (9109 MB/sec)
[    6.585806] async_tx: api initialized (async)
[    6.674805] sd 6:0:0:0: [sdb] 15360000 512-byte logical blocks: (7.86 GB/7.32 GiB)
[    6.684325] sd 6:0:0:0: [sdb] Write Protect is off
[    6.689099] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    6.691070] sd 6:0:0:0: [sdb] No Caching mode page found
[    6.696361] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    6.701111] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[    6.782075] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    6.797045]  sdb: sdb1 sdb2
[    6.804969] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    7.198536] systemd[1]: Inserted module 'autofs4'
[    7.219372] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    7.242234] systemd[1]: Detected architecture arm64.
[    7.283537] systemd[1]: Set hostname to <entak>.
[    7.325936] urandom_read: 1 callbacks suppressed
[    7.325943] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    7.544546] random: systemd: uninitialized urandom read (16 bytes read)
[    7.552885] systemd[1]: Created slice system-ceph\x2dmds.slice.
[    7.575098] random: systemd: uninitialized urandom read (16 bytes read)
[    7.582261] systemd[1]: Created slice system-ceph\x2dmgr.slice.
[    7.603651] systemd[1]: Created slice system-ceph\x2dmon.slice.
[    7.627825] systemd[1]: Created slice system-ceph\x2dvolume.slice.
[    7.651655] systemd[1]: Created slice system-modprobe.slice.
[    7.675647] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.699677] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.723588] systemd[1]: Created slice User and Session Slice.
[    7.747235] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.771520] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.799238] systemd[1]: Reached target Slices.
[    7.819261] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.843310] systemd[1]: Listening on LVM2 poll daemon socket.
[    7.867241] systemd[1]: Listening on multipathd control socket.
[    7.891335] systemd[1]: Listening on Syslog Socket.
[    7.911293] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.935197] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.959493] systemd[1]: Listening on Journal Audit Socket.
[    7.979291] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.003344] systemd[1]: Listening on Journal Socket.
[    8.023417] systemd[1]: Listening on Network Service Netlink Socket.
[    8.047326] systemd[1]: Listening on udev Control Socket.
[    8.067240] systemd[1]: Listening on udev Kernel Socket.
[    8.089142] systemd[1]: Mounting Huge Pages File System...
[    8.113342] systemd[1]: Mounting POSIX Message Queue File System...
[    8.137109] systemd[1]: Mounting Kernel Debug File System...
[    8.161034] systemd[1]: Mounting Kernel Trace File System...
[    8.185834] systemd[1]: Starting Journal Service...
[    8.209538] systemd[1]: Starting Set the console keyboard layout...
[    8.233489] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    8.261302] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.289549] systemd[1]: Starting Load Kernel Module drm...
[    8.311810] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    8.321007] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    8.332704] systemd[1]: Starting Load Kernel Modules...
[    8.353097] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.367957] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null). Quota mode: none.
[    8.377103] systemd[1]: Starting udev Coldplug all Devices...
[    8.401106] systemd[1]: Starting Uncomplicated firewall...
[    8.430667] systemd[1]: Started Journal Service.
[    8.706415] systemd-journald[478]: Received client request to flush runtime journal.
[    9.184495] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    9.186107] pstore: Using crash dump compression: deflate
[    9.186121] pstore: Registered efi as persistent store backend
[    9.285011] br0: port 1(eth1) entered blocking state
[    9.285021] br0: port 1(eth1) entered disabled state
[    9.303609] device eth1 entered promiscuous mode
[    9.304727] xgene-slimpro-mbox 10540000.slimpro-mbox: APM X-Gene SLIMpro MailBox registered
[    9.321439] xgene-slimpro-i2c soc:i2cslimpro: Mailbox I2C Adapter registered
[    9.372347] xgene-slimpro-hwmon soc:hwmonslimpro: APM X-Gene SoC HW monitor driver registered
[    9.409126] EDAC MC0: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
[    9.409144] xgene-edac 78800000.edac: X-Gene EDAC MC registered
[    9.415996] EDAC MC1: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
[    9.416012] xgene-edac 78800000.edac: X-Gene EDAC MC registered
[    9.431606] EDAC MC2: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
[    9.431623] xgene-edac 78800000.edac: X-Gene EDAC MC registered
[    9.438807] EDAC MC3: Giving out device to module xgene_edac controller xgene_edac_mc_err: DEV xgene_edac_mc_err (INTERRUPT)
[    9.438824] xgene-edac 78800000.edac: X-Gene EDAC MC registered
[    9.438895] EDAC DEVICE0: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
[    9.438901] xgene-edac 78800000.edac: X-Gene EDAC PMD0 registered
[    9.438937] EDAC DEVICE1: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
[    9.438943] xgene-edac 78800000.edac: X-Gene EDAC PMD1 registered
[    9.438976] EDAC DEVICE2: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
[    9.438982] xgene-edac 78800000.edac: X-Gene EDAC PMD2 registered
[    9.439013] EDAC DEVICE3: Giving out device to module xgene_edac controller xgene_pmd_err: DEV xgene_pmd_err (INTERRUPT)
[    9.439019] xgene-edac 78800000.edac: X-Gene EDAC PMD3 registered
[    9.439088] EDAC DEVICE4: Giving out device to module xgene_edac controller xgene_l3_err: DEV xgene_l3_err (INTERRUPT)
[    9.439095] xgene-edac 78800000.edac: X-Gene EDAC L3 registered
[    9.439127] EDAC DEVICE5: Giving out device to module xgene_edac controller xgene_soc_err: DEV xgene_soc_err (INTERRUPT)
[    9.439133] xgene-edac 78800000.edac: X-Gene EDAC SoC registered
[    9.598363] br0: port 1(eth1) entered blocking state
[    9.598376] br0: port 1(eth1) entered forwarding state
[    9.789582] random: crng init done
[    9.789589] random: 3 urandom warning(s) missed due to ratelimiting
[    9.810505] Adding 4194300k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:4194300k SSFS
[    9.880937] alua: device handler registered
[    9.882955] emc: device handler registered
[    9.885078] rdac: device handler registered
[   10.054283] loop0: detected capacity change from 0 to 100152
[   10.075279] loop1: detected capacity change from 0 to 100264
[   10.111533] loop2: detected capacity change from 0 to 117576
[   10.131414] loop3: detected capacity change from 0 to 117568
[   10.155249] loop4: detected capacity change from 0 to 124240
[   10.179244] loop5: detected capacity change from 0 to 135040
[   10.207386] loop6: detected capacity change from 0 to 57776
[   10.235251] loop7: detected capacity change from 0 to 74768
[   10.307152] br0: port 1(eth1) entered disabled state
[   11.010259] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   11.145755] audit: type=1400 audit(1637250815.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=773 comm="apparmor_parser"
[   11.146797] audit: type=1400 audit(1637250815.460:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=770 comm="apparmor_parser"
[   11.146806] audit: type=1400 audit(1637250815.460:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=770 comm="apparmor_parser"
[   11.147405] audit: type=1400 audit(1637250815.464:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=774 comm="apparmor_parser"
[   11.147418] audit: type=1400 audit(1637250815.464:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=774 comm="apparmor_parser"
[   11.147424] audit: type=1400 audit(1637250815.464:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=774 comm="apparmor_parser"
[   11.152463] audit: type=1400 audit(1637250815.468:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=768 comm="apparmor_parser"
[   11.153250] audit: type=1400 audit(1637250815.468:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=767 comm="apparmor_parser"
[   11.153261] audit: type=1400 audit(1637250815.468:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=767 comm="apparmor_parser"
[   11.156660] audit: type=1400 audit(1637250815.472:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=771 comm="apparmor_parser"
[   11.359058] xgene-enet 1f620000.ethernet eth1: Link is Up - 10Gbps
[   11.359096] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   11.359164] br0: port 1(eth1) entered blocking state
[   11.359170] br0: port 1(eth1) entered forwarding state
[   11.359230] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   12.949864] openvswitch: Open vSwitch switching datapath
[   12.982909] device ovs-system entered promiscuous mode
[   12.984902] Timeout policy base is empty
[   12.984910] Failed to associated timeout policy `ovs_test_tp'
[   13.062434] device br-int entered promiscuous mode
[   13.086668] device genev_sys_6081 entered promiscuous mode
[   13.836502] loop8: detected capacity change from 0 to 8