gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x501f0000]
[    0.000000] Linux version 5.15.2 (ubuntu@c2400) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP Thu Nov 18 16:27:22 UTC 2021
[    0.000000] Machine model: APM X-Gene Merlin board
[    0.000000] efi: EFI v2.40 by X-Gene Merlin Board EFI Aug 19 2016 18:09:46
[    0.000000] efi: ACPI=0x4ffa808000 ACPI 2.0=0x4ffa808014 SMBIOS 3.0=0x4ffa806000 ESRT=0x4fff039818 MEMRESERVE=0x4ffa3e1c98 
[    0.000000] esrt: Reserving ESRT space from 0x0000004fff039818 to 0x0000004fff039878.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x4ff7d27340-0x4ff7d2bfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000004000000000-0x00000040001fffff]
[    0.000000]   node   0: [mem 0x0000004000200000-0x0000004ffa7b9fff]
[    0.000000]   node   0: [mem 0x0000004ffa7ba000-0x0000004ffa7f2fff]
[    0.000000]   node   0: [mem 0x0000004ffa7f3000-0x0000004ffa7fcfff]
[    0.000000]   node   0: [mem 0x0000004ffa7fd000-0x0000004ffa7fdfff]
[    0.000000]   node   0: [mem 0x0000004ffa7fe000-0x0000004ffa804fff]
[    0.000000]   node   0: [mem 0x0000004ffa805000-0x0000004ffa806fff]
[    0.000000]   node   0: [mem 0x0000004ffa807000-0x0000004ffa808fff]
[    0.000000]   node   0: [mem 0x0000004ffa809000-0x0000004ffa9ecfff]
[    0.000000]   node   0: [mem 0x0000004ffa9ed000-0x0000004fff9b0fff]
[    0.000000]   node   0: [mem 0x0000004fff9b1000-0x0000004fff9f6fff]
[    0.000000]   node   0: [mem 0x0000004fff9f7000-0x0000004fffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000004000000000-0x0000004fffffffff]
[    0.000000] cma: Reserved 32 MiB at 0x0000004000400000
[    0.000000] percpu: Embedded 30 pages/cpu s83032 r8192 d31656 u122880
[    0.000000] pcpu-alloc: s83032 r8192 d31656 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16515072
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.15.2 root=UUID=e2d960f2-c915-4b52-ad54-530d929f19cd ro
[    0.000000] Unknown command line parameters: BOOT_IMAGE=/vmlinuz-5.15.2
[    0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 65647808K/67108864K available (15872K kernel code, 3702K rwdata, 13720K rodata, 8064K init, 1181K bss, 1428288K reserved, 32768K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x30/0x4d8 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 52445 entries in 205 pages
[    0.000000] ftrace: allocated 205 pages with 5 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Adjusting CPU interface base to 0x00000000780af000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] GICv2m: range[mem 0x79000000-0x79000fff], SPI[224:231]
[    0.000000] GICv2m: range[mem 0x79010000-0x79010fff], SPI[232:239]
[    0.000000] GICv2m: range[mem 0x79020000-0x79020fff], SPI[240:247]
[    0.000000] GICv2m: range[mem 0x79030000-0x79030fff], SPI[248:255]
[    0.000000] GICv2m: range[mem 0x79040000-0x79040fff], SPI[256:263]
[    0.000000] GICv2m: range[mem 0x79050000-0x79050fff], SPI[264:271]
[    0.000000] GICv2m: range[mem 0x79060000-0x79060fff], SPI[272:279]
[    0.000000] GICv2m: range[mem 0x79070000-0x79070fff], SPI[280:287]
[    0.000000] GICv2m: range[mem 0x79080000-0x79080fff], SPI[288:295]
[    0.000000] GICv2m: range[mem 0x79090000-0x79090fff], SPI[296:303]
[    0.000000] GICv2m: range[mem 0x790a0000-0x790a0fff], SPI[304:311]
[    0.000000] GICv2m: range[mem 0x790b0000-0x790b0fff], SPI[312:319]
[    0.000000] GICv2m: range[mem 0x790c0000-0x790c0fff], SPI[320:327]
[    0.000000] GICv2m: range[mem 0x790d0000-0x790d0fff], SPI[328:335]
[    0.000000] GICv2m: range[mem 0x790e0000-0x790e0fff], SPI[336:343]
[    0.000000] GICv2m: range[mem 0x790f0000-0x790f0fff], SPI[344:351]
[    0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[    0.000000] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[    0.000204] Console: colour dummy device 80x25
[    0.000371] printk: console [tty0] enabled
[    0.000420] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
[    0.000430] pid_max: default: 32768 minimum: 301
[    0.000478] LSM: Security Framework initializing
[    0.000494] Yama: becoming mindful.
[    0.000538] AppArmor: AppArmor initialized
[    0.000645] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000716] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.001563] rcu: Hierarchical SRCU implementation.
[    0.002469] Remapping and enabling EFI services.
[    0.002800] smp: Bringing up secondary CPUs ...
[    0.003049] Detected PIPT I-cache on CPU1
[    0.003082] CPU1: Booted secondary processor 0x0000000001 [0x501f0000]
[    0.003386] Detected PIPT I-cache on CPU2
[    0.003410] CPU2: Booted secondary processor 0x0000000100 [0x501f0000]
[    0.003678] Detected PIPT I-cache on CPU3
[    0.003694] CPU3: Booted secondary processor 0x0000000101 [0x501f0000]
[    0.003967] Detected PIPT I-cache on CPU4
[    0.003991] CPU4: Booted secondary processor 0x0000000200 [0x501f0000]
[    0.004278] Detected PIPT I-cache on CPU5
[    0.004296] CPU5: Booted secondary processor 0x0000000201 [0x501f0000]
[    0.004571] Detected PIPT I-cache on CPU6
[    0.004595] CPU6: Booted secondary processor 0x0000000300 [0x501f0000]
[    0.004874] Detected PIPT I-cache on CPU7
[    0.004892] CPU7: Booted secondary processor 0x0000000301 [0x501f0000]
[    0.004936] smp: Brought up 1 node, 8 CPUs
[    0.004958] SMP: Total of 8 processors activated.
[    0.004963] CPU features: detected: 32-bit EL0 Support
[    0.004966] CPU features: detected: 32-bit EL1 Support
[    0.004971] CPU features: detected: CRC32 instructions
[    0.005048] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.014282] CPU: All CPU(s) started at EL2
[    0.014328] alternatives: patching kernel code
[    0.025505] devtmpfs: initialized
[    0.038930] Registered cp15_barrier emulation handler
[    0.038946] Registered setend emulation handler
[    0.038952] KASLR disabled due to lack of seed
[    0.039040] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.039059] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.039545] pinctrl core: initialized pinctrl subsystem
[    0.039919] SMBIOS 3.0.0 present.
[    0.039933] DMI: AppliedMicro X-Gene Merlin Board/X-Gene Merlin Board, BIOS 3.06.15 Aug 19 2016
[    0.040215] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.041294] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.041800] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.042300] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.042327] audit: initializing netlink subsys (disabled)
[    0.042403] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.042838] thermal_sys: Registered thermal governor 'fair_share'
[    0.042842] thermal_sys: Registered thermal governor 'bang_bang'
[    0.042849] thermal_sys: Registered thermal governor 'step_wise'
[    0.042853] thermal_sys: Registered thermal governor 'user_space'
[    0.042857] thermal_sys: Registered thermal governor 'power_allocator'
[    0.042904] cpuidle: using governor ladder
[    0.042919] cpuidle: using governor menu
[    0.042967] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.043065] ASID allocator initialised with 32768 entries
[    0.043479] Serial: AMBA PL011 UART driver
[    0.053159] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.053169] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.053174] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.053179] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.055834] fbcon: Taking over console
[    0.055856] ACPI: Interpreter disabled.
[    0.056253] iommu: Default domain type: Translated 
[    0.056261] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.056384] vgaarb: loaded
[    0.056794] SCSI subsystem initialized
[    0.056867] libata version 3.00 loaded.
[    0.056939] usbcore: registered new interface driver usbfs
[    0.056962] usbcore: registered new interface driver hub
[    0.056980] usbcore: registered new device driver usb
[    0.057334] pps_core: LinuxPPS API ver. 1 registered
[    0.057342] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.057353] PTP clock support registered
[    0.057448] EDAC MC: Ver: 3.0.0
[    0.057770] Registered efivars operations
[    0.058313] NetLabel: Initializing
[    0.058320] NetLabel:  domain hash size = 128
[    0.058324] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.058354] NetLabel:  unlabeled traffic allowed by default
[    0.058602] clocksource: Switched to clocksource arch_sys_counter
[    0.085132] VFS: Disk quotas dquot_6.6.0
[    0.085174] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.085469] AppArmor: AppArmor Filesystem Enabled
[    0.085512] pnp: PnP ACPI: disabled
[    0.088693] NET: Registered PF_INET protocol family
[    0.088852] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.091987] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.092324] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.092956] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.093106] TCP: Hash tables configured (established 524288 bind 65536)
[    0.093354] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[    0.093671] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.093869] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.094104] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.094121] NET: Registered PF_XDP protocol family
[    0.094130] PCI: CLS 0 bytes, default 64
[    0.094302] Trying to unpack rootfs image as initramfs...
[    0.094740] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.094913] kvm [1]: IPA Size Limit: 42 bits
[    0.106126] kvm [1]: vgic interrupt IRQ9
[    0.106304] kvm [1]: Hyp mode initialized successfully
[    0.107242] Initialise system trusted keyrings
[    0.107268] Key type blacklist registered
[    0.107360] workingset: timestamp_bits=40 max_order=24 bucket_order=0
[    0.110099] zbud: loaded
[    0.110915] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.111288] fuse: init (API version 7.34)
[    0.111565] integrity: Platform Keyring initialized
[    0.125553] Key type asymmetric registered
[    0.125571] Asymmetric key parser 'x509' registered
[    0.125627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.125718] io scheduler mq-deadline registered
[    0.130822] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.131556] xgene-pcie 1f2b0000.pcie: host bridge /soc/pcie@1f2b0000 ranges:
[    0.131576] xgene-pcie 1f2b0000.pcie:   No bus range found for /soc/pcie@1f2b0000, using [bus 00-ff]
[    0.131596] xgene-pcie 1f2b0000.pcie:       IO 0xc010000000..0xc01000ffff -> 0x0000000000
[    0.131618] xgene-pcie 1f2b0000.pcie:      MEM 0xc120000000..0xc13fffffff -> 0x0020000000
[    0.131630] xgene-pcie 1f2b0000.pcie:      MEM 0xe000000000..0xffffffffff -> 0xe000000000
[    0.131646] xgene-pcie 1f2b0000.pcie:   IB MEM 0x8000000000..0x807fffffff -> 0x8000000000
[    0.131659] xgene-pcie 1f2b0000.pcie:   IB MEM 0x0000000000..0x7fffffffff -> 0x0000000000
[    0.131729] xgene-pcie 1f2b0000.pcie: (rc) x4 gen-3 link up
[    0.131816] xgene-pcie 1f2b0000.pcie: PCI host bridge to bus 0000:00
[    0.131827] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.131834] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.131844] pci_bus 0000:00: root bus resource [mem 0xc120000000-0xc13fffffff] (bus address [0x20000000-0x3fffffff])
[    0.131852] pci_bus 0000:00: root bus resource [mem 0xe000000000-0xffffffffff pref]
[    0.131886] pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400
[    0.131897] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131908] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131919] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131929] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131938] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131946] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131955] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131966] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    0.131994] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    0.132044] pci 0000:00:00.0: supports D1 D2
[    0.132590] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    0.132700] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802
[    0.132735] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40003fff 64bit]
[    0.132996] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    0.143038] pci 0000:00:00.0: BAR 14: assigned [mem 0xc120000000-0xc1200fffff]
[    0.143059] pci 0000:01:00.0: BAR 0: assigned [mem 0xc120000000-0xc120003fff 64bit]
[    0.143079] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.143087] pci 0000:00:00.0:   bridge window [mem 0xc120000000-0xc1200fffff]
[    0.143286] pcieport 0000:00:00.0: PME: Signaling with IRQ 59
[    0.143474] pcieport 0000:00:00.0: AER: enabled with IRQ 59
[    0.151596] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.156124] 10600000.serial: ttyS0 at MMIO 0x10600000 (irq = 27, base_baud = 3125000) is a 16550
[    0.716712] Freeing initrd memory: 101704K
[    0.717506] printk: console [ttyS0] enabled
[    1.564959] msm_serial: driver initialized
[    1.574176] loop: module loaded
[    1.578328] libphy: Fixed MDIO Bus: probed
[    1.582485] tun: Universal TUN/TAP device driver, 1.6
[    1.587895] PPP generic driver version 2.4.2
[    1.592348] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.598863] ehci-pci: EHCI PCI platform driver
[    1.603329] ehci-orion: EHCI orion driver
[    1.607383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.613544] ohci-pci: OHCI PCI platform driver
[    1.617987] uhci_hcd: USB Universal Host Controller Interface driver
[    1.624462] mousedev: PS/2 mouse device common for all mice
[    2.003528] rtc-efi rtc-efi.0: registered as rtc0
[    2.203873] rtc-efi rtc-efi.0: setting system clock to 2021-11-18T17:59:23 UTC (1637258363)
[    2.212391] i2c_dev: i2c /dev entries driver
[    2.217450] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    2.229638] device-mapper: uevent: version 1.0.3
[    2.234363] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    2.242987] cpu cpu0: OPP table can't be empty
[    2.247879] ledtrig-cpu: registered to indicate activity on CPUs
[    2.254822] xgene-pmu 78810000.pmu: X-Gene PMU version 2
[    2.260586] drop_monitor: Initializing network drop monitor service
[    2.267122] NET: Registered PF_INET6 protocol family
[    2.282871] Segment Routing with IPv6
[    2.286533] In-situ OAM (IOAM) with IPv6
[    2.290473] NET: Registered PF_PACKET protocol family
[    2.295588] Key type dns_resolver registered
[    2.300231] registered taskstats version 1
[    2.304468] Loading compiled-in X.509 certificates
[    2.310694] Loaded X.509 cert 'Build time autogenerated kernel key: 1ec72a9f46efbc68371a2830205f97ce3adea010'
[    2.320878] zswap: loaded using pool lzo/zbud
[    2.325602] Key type ._fscrypt registered
[    2.329605] Key type .fscrypt registered
[    2.333511] Key type fscrypt-provisioning registered
[    2.378448] cryptd: max_cpu_qlen set to 1000
[    2.398684] Key type encrypted registered
[    2.402689] AppArmor: AppArmor sha1 policy hashing enabled
[    2.408243] ima: No TPM chip found, activating TPM-bypass!
[    2.413716] Loading compiled-in module X.509 certificates
[    2.420399] Loaded X.509 cert 'Build time autogenerated kernel key: 1ec72a9f46efbc68371a2830205f97ce3adea010'
[    2.430277] ima: Allocated hash algorithm: sha1
[    2.434806] ima: No architecture policies found
[    2.439351] evm: Initialising EVM extended attributes:
[    2.444471] evm: security.selinux
[    2.447774] evm: security.SMACK64
[    2.451074] evm: security.SMACK64EXEC
[    2.454720] evm: security.SMACK64TRANSMUTE
[    2.458798] evm: security.SMACK64MMAP
[    2.462441] evm: security.apparmor
[    2.465828] evm: security.ima
[    2.468782] evm: security.capability
[    2.472341] evm: HMAC attrs: 0x1
[    2.479804] Freeing unused kernel memory: 8064K
[    2.777971] Checked W+X mappings: passed, no W+X pages found
[    2.783641] Run /init as init process
[    2.787294]   with arguments:
[    2.787297]     /init
[    2.787299]   with environment:
[    2.787301]     HOME=/
[    2.787303]     TERM=linux
[    2.787304]     BOOT_IMAGE=/vmlinuz-5.15.2
[    3.104285] gpio-dwapb 1c024000.gpio: no IRQ for port0
[    3.104291] xhci-hcd 19000000.dwusb: xHCI Host Controller
[    3.104304] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 1
[    3.120153] xgene-ahci 1a000000.sata: supply ahci not found, using dummy regulator
[    3.120399] libphy: APM X-Gene MDIO bus: probed
[    3.122584] xhci-hcd 19000000.dwusb: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000000010010
[    3.144122] xhci-hcd 19000000.dwusb: irq 28, io mem 0x19000000
[    3.150101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.151056] xgene-ahci 1a000000.sata: supply phy not found, using dummy regulator
[    3.158345] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.158350] usb usb1: Product: xHCI Host Controller
[    3.158352] usb usb1: Manufacturer: Linux 5.15.2 xhci-hcd
[    3.161697] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.174849] xgene-ahci 1a000000.sata: supply target not found, using dummy regulator
[    3.177865] usb usb1: SerialNumber: 19000000.dwusb
[    3.198032] xgene-ahci 1a000000.sata: skip clock and PHY initialization
[    3.209062] xgene-ahci 1a000000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.212434] i2c i2c-0: Added multiplexed i2c bus 1
[    3.218080] xgene-ahci 1a000000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.227215] i2c i2c-0: Added multiplexed i2c bus 2
[    3.227322] hub 1-0:1.0: USB hub found
[    3.227340] hub 1-0:1.0: 1 port detected
[    3.227546] xhci-hcd 19000000.dwusb: xHCI Host Controller
[    3.227554] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 2
[    3.227560] xhci-hcd 19000000.dwusb: Host supports USB 3.0 SuperSpeed
[    3.227596] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.227648] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    3.227653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.227655] usb usb2: Product: xHCI Host Controller
[    3.227658] usb usb2: Manufacturer: Linux 5.15.2 xhci-hcd
[    3.227660] usb usb2: SerialNumber: 19000000.dwusb
[    3.227908] hub 2-0:1.0: USB hub found
[    3.227924] hub 2-0:1.0: 1 port detected
[    3.232217] xgene-ahci 1a000000.sata: port 0 can do FBS, forcing FBSCP
[    3.251200] xgene-gpio-sb 17001000.gpio: Support 22 gpios, 8 irqs start from pin 8
[    3.275507] sdhci: Secure Digital Host Controller Interface driver
[    3.279659] i2c i2c-0: Added multiplexed i2c bus 3
[    3.279792] i2c i2c-0: Added multiplexed i2c bus 4
[    3.279797] pca954x 0-0071: registered 4 multiplexed busses for I2C switch pca9545
[    3.280587] xgene-gpio-sb 17001000.gpio: X-Gene GPIO Standby driver registered
[    3.280840] xgene-ahci 1a000000.sata: port 1 can do FBS, forcing FBSCP
[    3.280872] nvme nvme0: pci function 0000:01:00.0
[    3.280929] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    3.287523] sdhci: Copyright(c) Pierre Ossman
[    3.377139] scsi host0: xgene-ahci
[    3.380970] scsi host1: xgene-ahci
[    3.384506] ata1: SATA max UDMA/133 mmio [mem 0x1a000000-0x1a000fff] port 0x100 irq 29
[    3.384524] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.388695] xgene-enet 1f620000.ethernet: IRQ index 8 not found
[    3.392400] ata2: SATA max UDMA/133 mmio [mem 0x1a000000-0x1a000fff] port 0x180 irq 29
[    3.392515] xgene-ahci 1a200000.sata: supply ahci not found, using dummy regulator
[    3.419546] xgene-ahci 1a200000.sata: supply phy not found, using dummy regulator
[    3.427289] xgene-ahci 1a200000.sata: supply target not found, using dummy regulator
[    3.434613] mmc0: SDHCI controller on 1c000000.mmc [1c000000.mmc] using PIO
[    3.435080] xgene-ahci 1a200000.sata: skip clock and PHY initialization
[    3.448596] xgene-ahci 1a200000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.457619] xgene-ahci 1a200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.466996] xgene-ahci 1a200000.sata: port 0 can do FBS, forcing FBSCP
[    3.473827] xgene-ahci 1a200000.sata: port 1 can do FBS, forcing FBSCP
[    3.481360] scsi host2: xgene-ahci
[    3.485132] scsi host3: xgene-ahci
[    3.488686] ata3: SATA max UDMA/133 mmio [mem 0x1a200000-0x1a200fff] port 0x100 irq 30
[    3.496583] ata4: SATA max UDMA/133 mmio [mem 0x1a200000-0x1a200fff] port 0x180 irq 30
[    3.502614] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    3.504580] xgene-ahci 1a400000.sata: supply ahci not found, using dummy regulator
[    3.518610] xgene-ahci 1a400000.sata: supply phy not found, using dummy regulator
[    3.526785] xgene-ahci 1a400000.sata: supply target not found, using dummy regulator
[    3.534573] xgene-ahci 1a400000.sata: skip clock and PHY initialization
[    3.541200] xgene-ahci 1a400000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    3.550214] xgene-ahci 1a400000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc apst 
[    3.559573] xgene-ahci 1a400000.sata: port 0 can do FBS, forcing FBSCP
[    3.566292] xgene-ahci 1a400000.sata: port 1 can do FBS, forcing FBSCP
[    3.573405] scsi host4: xgene-ahci
[    3.577080] scsi host5: xgene-ahci
[    3.580575] ata5: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x100 irq 31
[    3.588467] ata6: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x180 irq 31
[    3.658884] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[    3.667035] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.674143] usb 1-1: SerialNumber: 6B060861B5A0
[    3.704779] ata2: SATA link down (SStatus 0 SControl 300)
[    3.739715] hub 1-1:1.0: USB hub found
[    3.743486] hub 1-1:1.0: 4 ports detected
[    3.816770] ata4: SATA link down (SStatus 0 SControl 300)
[    3.822174] ata3: SATA link down (SStatus 0 SControl 300)
[    3.870610] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.876993] ata1.00: supports DRM functions and may not be fully accessible
[    3.883927] ata1.00: ATA-11: Samsung SSD 870 EVO 2TB, SVT01B6Q, max UDMA/133
[    3.890948] ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32)
[    3.898551] ata1.00: Features: Trust
[    3.902373] ata1.00: supports DRM functions and may not be fully accessible
[    3.908807] ata5: SATA link down (SStatus 0 SControl 300)
[    3.910361] ata1.00: configured for UDMA/133
[    3.914701] ata6: SATA link down (SStatus 0 SControl 300)
[    4.350605] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[    4.485874] usb 1-1.1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.00
[    4.494196] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.501477] usb 1-1.1: Product: DataTraveler 3.0
[    4.506076] usb 1-1.1: Manufacturer: Kingston
[    4.510414] usb 1-1.1: SerialNumber: 08606E6B6612BE50D7168119
[    4.523212] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    4.529683] scsi host6: usb-storage 1-1.1:1.0
[    4.534185] usbcore: registered new interface driver usb-storage
[    4.543230] usbcore: registered new interface driver uas
[    5.593691] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    5.602147] sd 6:0:0:0: Attached scsi generic sg0 type 0
[    6.401655] sd 6:0:0:0: [sda] 15360000 512-byte logical blocks: (7.86 GB/7.32 GiB)
[    6.411143] sd 6:0:0:0: [sda] Write Protect is off
[    6.415918] sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00
[    6.417866] sd 6:0:0:0: [sda] No Caching mode page found
[    6.423159] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    6.488462]  sda: sda1 sda2
[    6.494190] random: fast init done
[    6.499626] sd 6:0:0:0: [sda] Attached SCSI removable disk
[    7.393328] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
[    7.400550] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    7.409733] nvme 0000:01:00.0:   device [144d:a80a] error status/mask=00000001/0000e000
[    7.417703] nvme 0000:01:00.0:    [ 0] RxErr                 
[    7.423434] pci_generic_config_write32: 28 callbacks suppressed
[    7.423439] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x7a may corrupt adjacent RW1C bits
[   11.524622] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
[   11.531828] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   11.541008] nvme 0000:01:00.0:   device [144d:a80a] error status/mask=00000001/0000e000
[   11.548978] nvme 0000:01:00.0:    [ 0] RxErr                 
[   11.554707] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x7a may corrupt adjacent RW1C bits
[   64.046090] pcieport 0000:00:00.0: AER: Corrected error received: 0000:01:00.0
[   64.053295] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[   64.062475] nvme 0000:01:00.0:   device [144d:a80a] error status/mask=00000001/0000e000
[   64.070446] nvme 0000:01:00.0:    [ 0] RxErr                 
[   64.076175] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x7a may corrupt adjacent RW1C bits
[   64.478625] nvme nvme0: I/O 16 QID 0 timeout, disable controller
[   64.590606] nvme nvme0: Device shutdown incomplete; abort shutdown
[   64.610619] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0xb2 may corrupt adjacent RW1C bits
[   64.620324] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   64.629984] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x78 may corrupt adjacent RW1C bits
[   64.639694] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   64.649330] nvme nvme0: Identify Controller failed (-4)
[   64.654541] nvme nvme0: Removing after probe failure status: -5
[   64.662841] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 870  1B6Q PQ: 0 ANSI: 5
[   64.671291] sd 0:0:0:0: Attached scsi generic sg1 type 0
[   64.671303] ata1.00: Enabling discard_zeroes_data
[   64.681373] sd 0:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[   64.689110] sd 0:0:0:0: [sdb] Write Protect is off
[   64.693885] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   64.693917] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   64.719142] ata1.00: Enabling discard_zeroes_data
[   64.746846] ata1.00: Enabling discard_zeroes_data
[   64.771633] sd 0:0:0:0: [sdb] supports TCG Opal
[   64.776156] sd 0:0:0:0: [sdb] Attached SCSI disk
[   64.793976] random: lvm: uninitialized urandom read (4 bytes read)
[   64.845199] random: lvm: uninitialized urandom read (2 bytes read)
[   66.162600] raid6: neonx8   gen()  3157 MB/s
[   66.234596] raid6: neonx8   xor()  2514 MB/s
[   66.306600] raid6: neonx4   gen()  3334 MB/s
[   66.378597] raid6: neonx4   xor()  2668 MB/s
[   66.450597] raid6: neonx2   gen()  3446 MB/s
[   66.522599] raid6: neonx2   xor()  2669 MB/s
[   66.594599] raid6: neonx1   gen()  3500 MB/s
[   66.666600] raid6: neonx1   xor()  2834 MB/s
[   66.738597] raid6: int64x8  gen()  3459 MB/s
[   66.810601] raid6: int64x8  xor()  1801 MB/s
[   66.882598] raid6: int64x4  gen()  3532 MB/s
[   66.954597] raid6: int64x4  xor()  1868 MB/s
[   67.026596] raid6: int64x2  gen()  3217 MB/s
[   67.098600] raid6: int64x2  xor()  1635 MB/s
[   67.170601] raid6: int64x1  gen()  2284 MB/s
[   67.242599] raid6: int64x1  xor()  1239 MB/s
[   67.246850] raid6: using algorithm int64x4 gen() 3532 MB/s
[   67.252311] raid6: .... xor() 1868 MB/s, rmw enabled
[   67.257253] raid6: using neon recovery algorithm
[   67.265338] xor: measuring software checksum speed
[   67.271216]    8regs           :  9108 MB/sec
[   67.276640]    32regs          :  9074 MB/sec
[   67.282371]    arm64_neon      :  7067 MB/sec
[   67.286709] xor: using function: 8regs (9108 MB/sec)
[   67.293427] async_tx: api initialized (async)
[   67.407936] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[   98.659241] random: lvm: uninitialized urandom read (4 bytes read)
[   99.167676] random: crng init done
[  114.846636] xgene-enet 1f620000.ethernet eth1: Link is Up - 10Gbps
[  114.852817] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready