localhost only Riak app.config based on Joyent dataset 399e09fc-c448-11e1-b3c8-a3d517dfbb07 (smartos 2012-07-02 sdc:sdc:riak:1.6.1)

app.config

%% -*- mode: erlang;erlang-indent-level: 4;indent-tabs-mode: nil -*-
%% ex: ft=erlang ts=4 sw=4 et
[
 %% Riak Core config
 {riak_core, [
              %% Default location of ringstate
              {ring_state_dir, "/var/db/riak/ring"},

              %% Raise the initial ring size
              {ring_creation_size, 256 },

              %% http is a list of IP addresses and TCP ports that the Riak
              %% HTTP interface will bind.
              {http, [ {"127.0.0.1", 8098 } ]},

              %% https is a list of IP addresses and TCP ports that the Riak
              %% HTTPS interface will bind.
              %{https, [{ "", 8098 }]},

              %% Default cert and key locations for https can be overridden
              %% with the ssl config variable, for example:
              %{ssl, [
              %       {certfile, "/opt/local/etc/riak/cert.pem"},
              %       {keyfile, "/opt/local/etc/riak/key.pem"}
              %      ]},

              %% riak_handoff_port is the TCP port that Riak uses for
              %% intra-cluster data handoff.
              {handoff_port, 8099 },

              %% Handoff IP address
              {handoff_ip, "127.0.0.1" },

              %% To encrypt riak_core intra-cluster data handoff traffic,
              %% uncomment the following line and edit its path to an
              %% appropriate certfile and keyfile.  (This example uses a
              %% single file with both items concatenated together.)
              %{handoff_ssl_options, [{certfile, "/tmp/erlserver.pem"}]},

              %% Disable legacy vnode routing for 1.1.x and above clusters
              %% (use vnode proxies).  Only set true on mixed clusters.
              {legacy_vnode_routing, false},

              %% Platform-specific installation paths (substituted by rebar)
              {platform_bin_dir, "/opt/local/sbin"},
              {platform_data_dir, "/var/db/riak"},
              {platform_etc_dir, "/opt/local/etc/riak"},
              {platform_lib_dir, "./lib"},
              {platform_log_dir, "/var/log/riak"}
             ]},

 %% Riak KV config
 {riak_kv, [
            %% Storage_backend specifies the Erlang module defining the storage
            %% mechanism that will be used on this node.
            %% Uncomment *one* that should be used; default: bitcask
            %% {storage_backend, riak_kv_bitcask_backend},
            {storage_backend, riak_kv_eleveldb_backend},
            %% {storage_backend, riak_kv_innostore_backend},

            %% pb_ip is the IP address that the Riak Protocol Buffers interface
            %% will bind to.  If this is undefined, the interface will not run.
            {pb_ip,   "127.0.0.1" },

            %% pb_port is the TCP port that the Riak Protocol Buffers interface
            %% will bind to
            {pb_port, 8087 },

            %% pb_backlog is the maximum length to which the queue of pending
            %% connections may grow. If set, it must be an integer >= 0.
            %% By default the value is 5. If you anticipate a huge number of
            %% connections being initialised *simultaneously*, set this number
            %% higher.
            %% {pb_backlog, 64},

            %% raw_name is the first part of all URLS used by the Riak raw HTTP
            %% interface.  See riak_web.erl and raw_http_resource.erl for
            %% details.
            %{raw_name, "riak"},

            %% mapred_name is URL used to submit map/reduce requests to Riak.
            {mapred_name, "mapred"},

            %% mapred_system indicates which version of the MapReduce
            %% system should be used: 'pipe' means riak_pipe will
            %% power MapReduce queries, while 'legacy' means that luke
            %% will be used
            {mapred_system, pipe},

            %% mapred_2i_pipe indicates whether secondary-index
            %% MapReduce inputs are queued in parallel via their own
            %% pipe ('true'), or serially via a helper process
            %% ('false' or undefined).  Set to 'false' or leave
            %% undefined during a rolling upgrade from 1.0.
            {mapred_2i_pipe, true},

            %% directory used to store a transient queue for pending
            %% map tasks
            %% Only valid when mapred_system == legacy
            %% {mapred_queue_dir, "/var/db/riak/mr_queue" },

            %% Each of the following entries control how many Javascript
            %% virtual machines are available for executing map, reduce,
            %% pre- and post-commit hook functions.
            {map_js_vm_count, 8 },
            {reduce_js_vm_count, 6 },
            {hook_js_vm_count, 2 },

            %% Number of items the mapper will fetch in one request.
            %% Larger values can impact read/write performance for
            %% non-MapReduce requests.
            %% Only valid when mapred_system == legacy
            %% {mapper_batch_size, 5},

            %% js_max_vm_mem is the maximum amount of memory, in megabytes,
            %% allocated to the Javascript VMs. If unset, the default is
            %% 8MB.
            {js_max_vm_mem, 8},

            %% js_thread_stack is the maximum amount of thread stack, in megabyes,
            %% allocate to the Javascript VMs. If unset, the default is 16MB.
            %% NOTE: This is not the same as the C thread stack.
            {js_thread_stack, 16},

            %% Number of objects held in the MapReduce cache. These will be
            %% ejected when the cache runs out of room or the bucket/key
            %% pair for that entry changes
            %% Only valid when mapred_system == legacy
            %% {map_cache_size, 10000},

            %% js_source_dir should point to a directory containing Javascript
            %% source files which will be loaded by Riak when it initializes
            %% Javascript VMs.
            %{js_source_dir, "/tmp/js_source"},

            %% http_url_encoding determines how Riak treats URL encoded
            %% buckets, keys, and links over the REST API. When set to 'on'
            %% Riak always decodes encoded values sent as URLs and Headers.
            %% Otherwise, Riak defaults to compatibility mode where links
            %% are decoded, but buckets and keys are not. The compatibility
            %% mode will be removed in a future release.
            {http_url_encoding, on},

            %% riak_stat enables the use of the "riak-admin status" command to
            %% retrieve information the Riak node for performance and debugging needs
            {riak_kv_stat, true},

            %% When using riak_kv_stat, use the legacy routines for tracking
            {legacy_stats, true},

            %% Switch to vnode-based vclocks rather than client ids.  This
            %% significantly reduces the number of vclock entries.
            %% Only set true if *all* nodes in the cluster are upgraded to 1.0
            {vnode_vclocks, true},

            %% This option enables compatability of bucket and key listing
            %% with 0.14 and earlier versions. Once a rolling upgrade to
            %% a version > 0.14 is completed for a cluster, this should be
            %% set to false for improved performance for bucket and key
            %% listing operations.
            {legacy_keylisting, false},

            %% This option toggles compatibility of keylisting with 1.0
            %% and earlier versions.  Once a rolling upgrade to a version
            %% > 1.0 is completed for a cluster, this should be set to
            %% true for better control of memory usage during key listing
            %% operations
            {listkeys_backpressure, true}
           ]},

 %% Riak Search Config
 {riak_search, [
                %% To enable Search functionality set this 'true'.
                {enabled, false}
               ]},

 %% Merge Index Config
 {merge_index, [
                %% The root dir to store search merge_index data
                {data_root, "/var/db/riak/merge_index"},

                %% The root dir to store secondary index merge_index data
                {data_root_2i, "/var/db/riak/merge_index_2i"},

                %% Size, in bytes, of the in-memory buffer.  When this
                %% threshold has been reached the data is transformed
                %% into a segment file which resides on disk.
                {buffer_rollover_size, 1048576},

                %% Overtime the segment files need to be compacted.
                %% This is the maximum number of segments that will be
                %% compacted at once.  A lower value will lead to
                %% quicker but more frequent compactions.
                {max_compact_segments, 20}
               ]},

 %% Bitcask Config
 {bitcask, [
             {data_root, "/var/db/riak/bitcask"}
           ]},

 %% eLevelDB Config
 {eleveldb, [
             %% Write buffer size, default: 4 MB
             %% {write_buffer_size, 4194304},

             %% Max open files, default: 20
             %% {max_open_files, 20},

             %% Block size, default: 4 KB
             %% {block_size, 4096},

             %% # of keys before restarting delta encoding, default: 16
             %% {block_restart_interval, 16},

             %% Default cache size, default: 8 MB
             %% {cache_size, 8388608},

             %% Do the write()/fsync() every time, default: true
             %% {sync, true},

             %% Make sure data is what we expected it to be, default: true
             %% {verify_checksums, true},

             {data_root, "/var/db/riak/leveldb"}
            ]},

 %% Innostore config
 {innostore, [
             %% Where data files go
             {data_home_dir, "/var/db/riak/innodb"},

             %% Where log files go
             {log_group_home_dir, "/var/db/riak/innodb"},

             %% In-memory buffer in bytes
             {buffer_pool_size, 33554432 },

             %% File descriptors used by default
             {open_files, 128},

             %% InnoDb table formats: compact, dynamic and compressed
             %% {format, compact},

             %% How many files you need -- usually, 3 < x < 6
             %% {log_files_in_group, 6},

             %% No bigger than 256MB
             %% {log_file_size, 134217728},

             %% Error log to use (instead of stderr)
             {error_log, "/var/log/riak/innodb.log"}
            ]},

 %% Lager Config
 {lager, [
            %% What handlers to install with what arguments
            %% The defaults for the logfiles are to rotate the files when
            %% they reach 10Mb or at midnight, whichever comes first, and keep
            %% the last 5 rotations. See the lager README for a description of
            %% the time rotation format:
            %% https://github.com/basho/lager/blob/master/README.org
            %%
            %% If you wish to disable rotation, you can either set the size to 0
            %% and the rotation time to "", or instead specify a 2-tuple that only
            %% consists of {Logfile, Level}.
            {handlers, [
                {lager_console_backend, info},
                {lager_file_backend, [
                    {"/var/log/riak/error.log", error, 10485760, "$D0", 5},
                    {"/var/log/riak/console.log", info, 10485760, "$D0", 5}
                ]}
            ]},

            %% Whether to write a crash log, and where.
            %% Commented/omitted/undefined means no crash logger.
            {crash_log, "/var/log/riak/crash.log"},

            %% Maximum size in bytes of events in the crash log - defaults to 65536
            {crash_log_msg_size, 65536},

            %% Maximum size of the crash log in bytes, before its rotated, set
            %% to 0 to disable rotation - default is 0
            {crash_log_size, 10485760},

            %% What time to rotate the crash log - default is no time
            %% rotation. See the lager README for a description of this format:
            %% https://github.com/basho/lager/blob/master/README.org
            {crash_log_date, "$D0"},

            %% Number of rotated crash logs to keep, 0 means keep only the
            %% current one - default is 0
            {crash_log_count, 5},

            %% Whether to redirect error_logger messages into lager - defaults to true
            {error_logger_redirect, true}
        ]},

 %% riak_sysmon config
 {riak_sysmon, [
         %% To disable forwarding events of a particular type, use a
         %% limit of 0.
         {process_limit, 30},
         {port_limit, 2},

         %% Finding reasonable limits for a given workload is a matter
         %% of experimentation.
         {gc_ms_limit, 100},
         {heap_word_limit, 40111000},

         %% Configure the following items to 'false' to disable logging
         %% of that event type.
         {busy_port, true},
         {busy_dist_port, true}
        ]},

 %% SASL config
 {sasl, [
         {sasl_error_logger, false}
        ]},

 %% riak_control config
 {riak_control, [
                %% Set to false to disable the admin panel.
                {enabled, false},

                %% Authentication style used for access to the admin
                %% panel. Valid styles are 'userlist' <TODO>.
                {auth, userlist},

                %% If auth is set to 'userlist' then this is the
                %% list of usernames and passwords for access to the
                %% admin panel.
                {userlist, [{"user", "pass"}
                           ]},

                %% The admin panel is broken up into multiple
                %% components, each of which is enabled or disabled
                %% by one of these settings.
                {admin, true}
                ]}
].