prepare-wiimode.sh

# Place in the folder where all the libdrc dependencies are.
#
# Remove the mac80211 module and load the patched one
# For this to work we need to first unload all the wifi modules, load 
# the patched mac80211 stack and then load back the wifi modules.
# After this hostappd and netboot are started. One can connect to both of them via sudo screen.

WLAN=wlan1               # Interface Name
BSSID=34:af:2c:4d:a7:65  # BSSID of the WiiU pad
DOMAIN=AT                # The regulatory domain for WiFi

# Stop network manager
service network-manager stop

# unload modules in the correct order
rmmod rt73usb
rmmod rt2800usb
rmmod rt2800lib
rmmod rt2x00usb
rmmod rt2x00lib
rmmod iwldvm
rmmod mac80211

# Load patched mac80211 module and rt2800 modules
insmod drc-mac80211/mac80211.ko
modprobe rt2800usb

# give it some time to load and check if everything is OK.
sleep 1
test -f "/sys/class/net/$WLAN/tsf" && echo 'Patched mac80211 and rt2800usb loaded.'

# set ap subnet
ip a a 192.168.1.10/24 dev $WLAN
ip l set mtu 1800 dev $WLAN

# Set regulatory domain
iw reg set $DOMAIN

# Start hostappd and netboot via screen
screen -dmS hostappd drc-hostap/hostapd/hostapd -dd drc-hostap/conf/wiiu_ap_normal.conf
screen -dmS netboot netboot/netboot 192.168.1.255 192.168.1.10 192.168.1.11 $BSSID

echo 'sudo screen -r hostappd'
echo 'sudo screen -r netboot'