i2c won't wakeup after sleeping when a phone call received (on samsung fascinate)

dmesg.log

s5pv210_setup_sdhci_cfg_card MMC_SD card inderted 
s5pv210_setup_sdhci_cfg_card MMC_SD card inderted 
<6>wakeup wake lock: wlan_wake
<6>kr3dh: <trace> kr3dh_resume()
writing odr value 0xa0
<6>fsa9480 7-0025: dev1: 0x8, dev2: 0x0
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>[ wm8994_samsung.c (wm8994_resume,3353) ] wm8994_resume..
<6>PM: resume of devices complete after 336.659 msecs
<6>[ wm8994_samsung.c (wm8994_resume,3355) ] ------WM8994 Revision = [3]-------
Restarting tasks ... <6>[ wm8994_herring.c (wm8994_configure_clock,1140) ] USBOSC Enabled in Sleep Mode

done.
<7>Universal : Card status 1
<6>dai_active 0, IISMOD d0001c00, IISCON 8030ce38
<6>suspend: exit suspend, ret = 0 (2011-09-24 02:30:39.623996585 UTC)
<7>save exit: isCheckpointed 0
<7>save exit: isCheckpointed 0
<6>PM: Syncing filesystems ... <7>save exit: isCheckpointed 0
<7>save exit: isCheckpointed 0
done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
<6>[ wm8994_samsung.c (wm8994_suspend,3335) ] Codec State = [0x0], Stream State = [0x0]
<6>[ wm8994_herring.c (wm8994_configure_clock,1143) ] USBOSC disable in Sleep Mode

<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>kr3dh: <trace> kr3dh_suspend()
<6>PM: suspend of devices complete after 166.164 msecs
<6>PM: late suspend of devices complete after 0.319 msecs
<7>S5P_WAKEUP_STAT 0x1
<7>EINT_PEND 0x0, 0x8, 0x20, 0x40
<6>PM: early resume of devices complete after 0.208 msecs
s5pv210_setup_sdhci_cfg_card MMC_SD card inderted 
s5pv210_setup_sdhci_cfg_card MMC_SD card inderted 
s5pv210_setup_sdhci_cfg_card MMC_SD card inderted 
s5pv210_setup_sdhci_cfg_card MMC_SD card inderted 
s5pv210_setup_sdhci_cfg_card MMC_SD card inderted 
<6>kr3dh: <trace> kr3dh_resume()
writing odr value 0xa0
<6>fsa9480 7-0025: dev1: 0x8, dev2: 0x0
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>[ wm8994_samsung.c (wm8994_resume,3353) ] wm8994_resume..
<6>wakeup wake lock: alarm
<6>PM: resume of devices complete after 336.276 msecs
<6>[ wm8994_samsung.c (wm8994_resume,3355) ] ------WM8994 Revision = [3]-------
Restarting tasks ... <3>[OneDRAM] (dpram_read_fmt, lock) lock_value: 2
<3>[OneDRAM] (dpram_read_fmt, release) lock_value: 1
done.
<7>Universal : Card status 1
<6>[ wm8994_samsung.c (wm8994_startup,1304) ] Turn on codec!! Power state =[1]
<6>dai_active 0, IISMOD d0001c00, IISCON 8030ce38
<6>Inside s5p_i2s_resume..@559
<6>suspend: exit suspend, ret = 0 (2011-09-24 02:35:23.617867375 UTC)
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x300: -6
<6>request_suspend_state: sleep (3->3) at 208693496566 (2011-09-24 02:35:23.702088834 UTC)
<3>WM8994 I2C Codec 4-001a: Failed to read 0x302: -6
<6>[ wm8994_samsung.c (wm8994_set_dai_fmt,1036) ] 
<3>i2c write problem occured
<3>i2c write problem occured
<6>wake enabled for irq 34
<3>i2c write problem occured
<6>[ wm8994_samsung.c (wm8994_set_sysclk,1009) ] clk_id =2 
<6>[ wm8994_samsung.c (wm8994_hw_params,1137) ] 
<3>WM8994 I2C Codec 4-001a: Failed to read 0x303: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x210: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x300: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x304: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x305: -6
<6>[ wm8994_samsung.c (configure_clock,790) ] 
<3>WM8994 I2C Codec 4-001a: Failed to read 0x200: -6
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x200: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x208: -6
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<6>[ wm8994_samsung.c (wm8994_set_path,393) ] routing to RCV

<6>[ wm8994_herring.c (wm8994_set_playback_receiver,1836) ] 
<3>WM8994 I2C Codec 4-001a: Failed to read 0x20: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x21: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x1f: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x610: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x611: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x2d: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x2e: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x33: -6
<3>i2c write problem occured
<6>[ wm8994_herring.c (wm8994_set_codec_gain,4980) ] Set gain mode = 0x1000, device = 0x2, gain_bits = 0x3,             table_num=43, gain_code = 0

<3>WM8994 I2C Codec 4-001a: Failed to read 0x610: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x611: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x402: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x403: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x31: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x32: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x20: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x21: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x1f: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x5: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x601: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x602: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x208: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x3: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x1: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x420: -6
<3>i2c write problem occured
<3>cypress_touchkey_driver 10-0020: i2c write error
<7>notify_led_off: notification led disabled
<6>request_suspend_state: wakeup (3->0) at 211485964256 (2011-09-24 02:35:26.494555857 UTC)
<6>s3cfb_late_resume is called
<6>FIMD src sclk = 166750000
<6>s3cfb_late_resume is complete
<6>[ wm8994_samsung.c (wm8994_shutdown,1326) ] Stream_state = [0x1],  Codec State = [0x1]
<6>[ wm8994_samsung.c (wm8994_shutdown,1343) ] Turn off Codec!!
<6>wm8994_set_mic_bias: HWREV=7, on=0
<3>i2c write problem occured
<6>[ wm8994_samsung.c (wm8994_startup,1304) ] Turn on codec!! Power state =[1]
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x300: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x302: -6
<6>[ wm8994_samsung.c (wm8994_set_dai_fmt,1036) ] 
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<6>[ wm8994_samsung.c (wm8994_set_sysclk,1009) ] clk_id =2 
<6>[ wm8994_samsung.c (wm8994_hw_params,1137) ] 
<3>WM8994 I2C Codec 4-001a: Failed to read 0x303: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x210: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x300: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x304: -6
<3>WM8994 I2C Codec 4-001a: Failed to read 0x305: -6
<6>[ wm8994_samsung.c (configure_clock,790) ] 
<3>WM8994 I2C Codec 4-001a: Failed to read 0x200: -6
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x200: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x208: -6
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<6>[ wm8994_samsung.c (wm8994_set_path,399) ] routing to RING_SPK

<6>[ wm8994_herring.c (wm8994_set_playback_speaker,2116) ] 
<3>WM8994 I2C Codec 4-001a: Failed to read 0x1: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x3: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x26: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x27: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x610: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x611: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x24: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x36: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x5: -6
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<3>i2c write problem occured
<6>[ wm8994_herring.c (wm8994_set_codec_gain,4980) ] Set gain mode = 0x1000, device = 0x40, gain_bits = 0x45,           table_num=43, gain_code = 0

<3>WM8994 I2C Codec 4-001a: Failed to read 0x610: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x611: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x402: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x403: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x22: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x23: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x26: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x27: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x25: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x402: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x403: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x26: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x25: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x601: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x1: -6
<3>i2c write problem occured
<3>WM8994 I2C Codec 4-001a: Failed to read 0x420: -6
<3>i2c write problem occured
<6>[ wm8994_samsung.c (wm8994_shutdown,1326) ] Stream_state = [0x1],  Codec State = [0x1]
<6>[ wm8994_samsung.c (wm8994_shutdown,1343) ] Turn off Codec!!
<6>wm8994_set_mic_bias: HWREV=7, on=0
<3>i2c write problem occured
<6>wake disabled for irq 34
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>request_suspend_state: sleep (0->3) at 261560516928 (2011-09-24 02:36:16.097289399 UTC)
dhd_get_dtim_skip bcn_li_dtim=3 DTIM=2 Listen=20
<7>save exit: isCheckpointed 1
<7>save exit: isCheckpointed 0
<7>save exit: isCheckpointed 0