Skip to content

Instantly share code, notes, and snippets.

@syuu1228

syuu1228/gist:5534211

Created May 7, 2013 16:56
Show Gist options
  • Save syuu1228/5534211 to your computer and use it in GitHub Desktop.
Save syuu1228/5534211 to your computer and use it in GitHub Desktop.
Download ZIP
panic
Raw
gistfile1.txt
0 [ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=4a39a193-f0ce-48d4-a547-de5ea9c66929 ro console=ttyS0,9600
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fdaf0-0x000fdaff] mapped at [ffff8800000fdaf0]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdfffdfff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] RAMDISK: [mem 0x3611c000-0x37085fff]
[ 0.000000] ACPI: RSDP 00000000000fd970 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffe4b0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffe4f0 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfffff40 00040
[ 0.000000] ACPI: SSDT 00000000dffff800 00735 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dffff6e0 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dffff6a0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff]
[ 0.000000] NODE_DATA [mem 0x21fffb000-0x21fffffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 2:1fff7001, boot clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdfffdfff]
[ 0.000000] node 0: [mem 0x100000000-0x21fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfffe000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
[ 0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s85056 r8192 d21440 u2097152
[ 0.000000] kvm-clock: cpu 0, msr 2:1fff7001, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 21fc0df40
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064263
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=4a39a193-f0ce-48d4-a547-de5ea9c66929 ro console=ttyS0,9600
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8159260k/8912896k available (7006k kernel code, 524748k absent, 228888k reserved, 6238k data, 992k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Detected 2394.562 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 4789.12 BogoMIPS (lpj=9578248)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008033] Security Framework initialized
[ 0.008958] AppArmor: AppArmor initialized
[ 0.009886] Yama: becoming mindful.
[ 0.011338] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016338] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019828] Mount-cache hash table entries: 256
[ 0.020244] Initializing cgroup subsys cpuacct
[ 0.021213] Initializing cgroup subsys memory
[ 0.022237] Initializing cgroup subsys devices
[ 0.024011] Initializing cgroup subsys freezer
[ 0.024970] Initializing cgroup subsys blkio
[ 0.025916] Initializing cgroup subsys perf_event
[ 0.026929] Initializing cgroup subsys hugetlb
[ 0.028127] mce: CPU supports 10 MCE banks
[ 0.029071] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.029071] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.029071] tlb_flushall_shift: 6
[ 0.046600] Freeing SMP alternatives: 24k freed
[ 0.054007] ACPI: Core revision 20121018
[ 0.055646] ftrace: allocating 26690 entries in 105 pages
[ 0.065111] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066178] smpboot: CPU0: Intel QEMU Virtual CPU version 1.4.0 (fam: 06, model: 02, stepping: 03)
[ 0.072000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.072000] Brought up 1 CPUs
[ 0.072000] smpboot: Total of 1 processors activated (4789.12 BogoMIPS)
[ 0.072361] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.074229] devtmpfs: initialized
[ 0.077101] EVM: security.selinux
[ 0.077721] EVM: security.SMACK64
[ 0.078430] EVM: security.capability
[ 0.080296] regulator-dummy: no parameters
[ 0.081120] NET: Registered protocol family 16
[ 0.082271] ACPI: bus type pci registered
[ 0.083141] PCI: Using configuration type 1 for base access
[ 0.084674] bio: create slab <bio-0> at 0
[ 0.085310] ACPI: Added _OSI(Module Device)
[ 0.085855] ACPI: Added _OSI(Processor Device)
[ 0.086423] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.087020] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.090142] ACPI: Interpreter enabled
[ 0.091111] ACPI: (supports S0 S3 S4 S5)
[ 0.092092] ACPI: Using IOAPIC for interrupt routing
[ 0.095099] ACPI: No dock devices found.
[ 0.095640] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.096116] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.097895] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.100045] PCI host bridge to bus 0000:00
[ 0.100632] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.101388] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.102254] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.103095] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.104009] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[ 0.119379] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.120020] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.139092] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.140009] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.141363] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.142316] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.143238] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.144292] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.145168] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.146011] vgaarb: loaded
[ 0.146542] SCSI subsystem initialized
[ 0.147073] ACPI: bus type scsi registered
[ 0.148067] ACPI: bus type usb registered
[ 0.148655] usbcore: registered new interface driver usbfs
[ 0.149413] usbcore: registered new interface driver hub
[ 0.150196] usbcore: registered new device driver usb
[ 0.150984] PCI: Using ACPI for IRQ routing
[ 0.152041] NetLabel: Initializing
[ 0.152564] NetLabel: domain hash size = 128
[ 0.153139] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.153819] NetLabel: unlabeled traffic allowed by default
[ 0.154779] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.156035] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.157186] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.163128] Switching to clocksource kvm-clock
[ 0.167890] AppArmor: AppArmor Filesystem Enabled
[ 0.168590] pnp: PnP ACPI init
[ 0.169002] ACPI: bus type pnp registered
[ 0.169962] pnp: PnP ACPI: found 6 devices
[ 0.170503] ACPI: ACPI bus type pnp unregistered
[ 0.176918] NET: Registered protocol family 2
[ 0.177674] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.179078] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.181039] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.182037] TCP: reno registered
[ 0.182470] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.183312] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.184293] NET: Registered protocol family 1
[ 0.184865] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.185628] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.186377] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.187343] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.189175] Trying to unpack rootfs image as initramfs...
[ 0.415435] Freeing initrd memory: 15784k freed
[ 0.417806] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.418704] software IO TLB [mem 0xdbff8000-0xdfff8000] (64MB) mapped at [ffff8800dbff8000-ffff8800dfff7fff]
[ 0.420190] Initialise module verification
[ 0.420755] audit: initializing netlink socket (disabled)
[ 0.421462] type=2000 audit(1367945606.420:1): initialized
[ 0.445309] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.447510] VFS: Disk quotas dquot_6.5.2
[ 0.448122] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.449320] fuse init (API version 7.20)
[ 0.449883] msgmni has been set to 15966
[ 0.450683] Key type asymmetric registered
[ 0.451219] Asymmetric key parser 'x509' registered
[ 0.451877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.452866] io scheduler noop registered
[ 0.453373] io scheduler deadline registered (default)
[ 0.454027] io scheduler cfq registered
[ 0.454580] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.455306] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.456244] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.457201] ACPI: Power Button [PWRF]
[ 0.458794] GHES: HEST is not enabled!
[ 0.460136] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.483066] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.485705] Linux agpgart interface v0.103
[ 0.488644] brd: module loaded
[ 0.490041] loop: module loaded
[ 0.491722] scsi0 : ata_piix
[ 0.492369] scsi1 : ata_piix
[ 0.492832] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc140 irq 14
[ 0.493822] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc148 irq 15
[ 0.495194] libphy: Fixed MDIO Bus: probed
[ 0.496001] tun: Universal TUN/TAP device driver, 1.6
[ 0.497292] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.499142] PPP generic driver version 2.4.2
[ 0.500227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.501604] ehci-pci: EHCI PCI platform driver
[ 0.502551] ehci-platform: EHCI generic platform driver
[ 0.503675] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.505021] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.507346] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.508523] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 0.510243] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c100
[ 0.511627] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.513185] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.514806] usb usb1: Product: UHCI Host Controller
[ 0.515896] usb usb1: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[ 0.517282] usb usb1: SerialNumber: 0000:00:01.2
[ 0.518425] hub 1-0:1.0: USB hub found
[ 0.519281] hub 1-0:1.0: 2 ports detected
[ 0.520376] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.522906] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.523976] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.525340] mousedev: PS/2 mouse device common for all mice
[ 0.527216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.529597] rtc_cmos 00:00: RTC can wake from S4
[ 0.530965] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.532520] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.534044] device-mapper: uevent: version 1.0.3
[ 0.535147] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.537089] cpuidle: using governor ladder
[ 0.538042] cpuidle: using governor menu
[ 0.538923] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.540263] EFI Variables Facility v0.08 2004-May-17
[ 0.541632] ashmem: initialized
[ 0.542528] TCP: cubic registered
[ 0.543434] NET: Registered protocol family 10
[ 0.544884] NET: Registered protocol family 17
[ 0.546292] Key type dns_resolver registered
[ 0.547526] Loading module verification certificates
[ 0.549578] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4fb521df0b0fa81f775431361b8076d5d0f1869a'
[ 0.551704] registered taskstats version 1
[ 0.554512] Key type trusted registered
[ 0.556950] Key type encrypted registered
[ 0.559564] rtc_cmos 00:00: setting system clock to 2013-05-07 16:53:27 UTC (1367945607)
[ 0.560894] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.561485] EDD information not available.
[ 0.650578] ata1.00: ATA-7: QEMU HARDDISK, 1.4.0, max UDMA/100
[ 0.651951] ata1.00: 20971520 sectors, multi 16: LBA48
[ 0.653002] ata1.00: configured for MWDMA2
[ 0.653467] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 1.4. PQ: 0 ANSI: 5
[ 0.654651] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
[ 0.657024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.658860] sd 0:0:0:0: [sda] Write Protect is off
[ 0.662274] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.668621] sda: sda1 sda2 < sda5 >
[ 0.669281] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.671048] Freeing unused kernel memory: 992k freed
[ 0.671949] Write protecting the kernel read-only data: 12288k
[ 0.675758] Freeing unused kernel memory: 1176k freed
[ 0.678774] Freeing unused kernel memory: 1080k freed
Loading, please wait...
Begin: Loading essential drivers ... done.
[ 0.693340] udevd[92]: starting version 175
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
[ 0.765375] Disabling lock debugging due to kernel taint
[ 0.766368] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.767392] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.783902] 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc90000e56000, 52:54:00:0e:ad:07, IRQ 10
[ 0.810668] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.832307] FDC 0 is a S82078B
Begin: Running /scripts/local-premount ... done.
[ 0.899683] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 1.416112] tsc: Refined TSC clocksource calibration: 2394.566 MHz
[ 1.505921] Adding 8385532k swap on /dev/sda5. Priority:-1 extents:1 across:8385532k
[ 1.726721] init: log.c:813: Assertion failed in log_clear_unflushed: ! log->io
[ 1.732994] init: Caught abort, core dumped
[ 1.739330] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000600
[ 1.739330]
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment