octeon boot log

U-Boot 1.1.1  (Build time: Oct 23 2009 - 14:48:20)

CAPK-0100ND-CN50XX_1.8.1_294_V1.1.1

Hardware Monitor: W83792D initialized
CN3010_EVB_HS5 board revision major:0, minor:0, serial #: CAPK-0100ND
OCTEON CN5020-SCP pass 1.1, Core clock: 500 MHz, DDR clock: 265 MHz (530 Mhz data rate)
PAL rev: 0.00, MCU rev: 0.00, CPU voltage: 0.00
DRAM:  1024 MB
Flash:  8 MB
Clearing DRAM........ done
BIST check passed.
Starting PCI
PCI Status: PCI 32-bit
PCI BAR 0: 0x00000000, PCI BAR 1: Memory 0x00000000  PCI 0xf8000000
Net:   octeth0, octeth1, octeth2
 Bus 0 (CF Card): not available  

Octeon capk-0100nd# tftpload
Unknown command 'tftpload' - try 'help'
Octeon capk-0100nd# tftpboot
Interface 0 has 3 ports (RGMII)
*** Warning: no boot file name; using '6F01A8C0.img'
Using octeth0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.111
Filename '6F01A8C0.img'.
Load address: 0x20000000
Loading: octeth0: Up 100 Mbps Full duplex (port  0)
#################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 ################################################
done
Bytes transferred = 62681556 (3bc71d4 hex), 3114 Kbytes/sec
Octeon capk-0100nd# bootoctlinux
ELF file is 64 bit
Attempting to allocate memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x0000000001100000), size 0x115a7a8
Allocated memory for ELF segment: addr: 0xffffffff81100000, size 0x115a7a8
Processing PHDR 0
  Loading 112eb00 bytes at ffffffff81100000
  Clearing 2bca8 bytes at ffffffff8222eb00
## Loading Linux kernel with entry point: 0xffffffff814dccc0 ...
Bootloader: Done loading app on coremask: 0x1
Linux version 2.6.27.7-Cavium-Octeon (root@syuu-desktop) (gcc version 4.3.3 (Cavium Networks Version: 1_9_0 build 80) ) #2 SMP Tue Jul 27 03:41:33 JST 2010
CVMSEG size: 2 cache lines (256 bytes)
CPU revision is: 000d0601 (Cavium Octeon)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
 memory: 000000000dc00000 @ 0000000002300000 (usable)
 memory: 0000000012400000 @ 0000000020000000 (usable)
Wasting 501760 bytes for tracking 8960 unused pages
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  DMA      0x00002300 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00002300 -> 0x0000ff00
    0: 0x00020000 -> 0x00032400
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128380
Kernel command line:  bootoctlinux console=ttyS0,115200
Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
PID hash table entries: 2048 (order: 11, 16384 bytes)
hwtimer: Added MIPS Generic timer (MIPS Generic Kernel jiffy timer) at index=0
console [ttyS0] enabled
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 512256k/524288k available (4020k kernel code, 11596k reserved, 1243k data, 12330k init, 0k highmem)
Calibrating delay using timer specific routine.. 1000.79 BogoMIPS (lpj=5003988)
Security Framework initialized
Mount-cache hash table entries: 256
Checking for the daddi bug... no.
Brought up 1 CPUs
net_namespace: 800 bytes
NET: Registered protocol family 16
Enabling Octeon big bar support
PCI Status: PCI 32-bit
PCI Clock: 33 MHz
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
bus: 00 index 0 io port: [4000, ffffffff]
bus: 00 index 1 mmio: [11b00f0000000, 11b0130000000]
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
NET: Registered protocol family 1
/proc/octeon_perf: Octeon performace counter interface loaded
Octeon watchdog driver loaded with a timeout of 8589 ms.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1001
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver2 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
console [netcon0] enabled
netconsole: network logging started
i2c /dev entries driver
Uniform Multi-Platform E-IDE driver
Driver 'sd' needs updating - please use bus_type methods
usbmon: debugfs is not available
dwc_otg: version 2.40a 10-APR-2006
DWC_otg: Using DMA mode
dwc_otg dwc_otg.0: DWC OTG Controller
dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
dwc_otg dwc_otg.0: irq 64, io mem 0x00000000
DWC_otg: Init: Port Power? op_state=1
DWC_otg: Init: Power Port (0)
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
rtc-ds1307 0-0068: rtc core: registered ds1337 as rtc0
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using mips/octeon performance monitoring.
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
serial8250: ttyS0 at MMIO 0x1180000000800 (irq = 42) is a 16550A
serial8250: ttyS1 at MMIO 0x1180000000c00 (irq = 43) is a 16550A
cf: Octeon bootbus compact flash driver version 2.0
cf: Compact flash found in bootbus region 3 (16 bit).
cf:  Serial  (0 sectors, 512 bytes/sector)
cf: Compact flash not detected.
Bootbus flash: Setting flash for 8MB flash at 0x1f400000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
/sbin/rc starting
Updating module dependencies
Loading IPv6 module
NET: Registered protocol family 10
Mounting file systems
Setting up loopback
Starting syslogd
Jan  1 00:00:05 (none) syslog.info syslogd started: BusyBox v1.2.1
Starting telnetd
/sbin/rc completJan  1 00:00:05 (none) daemon.info init: Starting pid 695, console /dev/ttyS0: '/bin/sh'


BusyBox v1.2.1 (2010.07.26-17:55+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ # free -m
BusyBox v1.2.1 (2010.07.26-17:55+0000) multi-call binary

Usage: free 

Displays the amount of free and used system memory

~ # free
              total         used         free       shared      buffers
  Mem:       512692        47988       464704            0            0
 Swap:            0            0            0
Total:       512692        47988       464704
~ #