Memory: 178516k/524276k available (2681k kernel code, 460k absent, 345300k reserved, 4129k data, 384k init)

gistfile1.txt

Linux version 2.6.37-rc5+ (syuu@localhost) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.3, pie-0.4.5) ) #36 SMP Sun Dec 19 21:53:09 JST 2010
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-rc5+ root=/dev/vda1 ro console=ttyS0,115200n8r
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
 BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
 BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: /Bochs, BIOS Bochs 01/01/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1fffd max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00E0000000 mask FFE0000000 uncachable
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
found SMP MP-table at [ffff8800000fdba0] fdba0
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000001fffd000
 0000000000 - 001fe00000 page 2M
 001fe00000 - 001fffd000 page 4k
kernel direct mapping tables up to 1fffd000 @ 1fffa000-1fffd000
ACPI: RSDP 00000000000fdb50 00014 (v00 BOCHS )
ACPI: RSDT 000000001fffde10 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000001ffffe40 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000001fffdfd0 01E22 (v01   BXPC   BXDSDT 00000001 INTL 20090123)
ACPI: FACS 000000001ffffe00 00040
ACPI: SSDT 000000001fffdf80 00044 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000001fffde90 0007A (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000001fffde50 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001ee00000-ffff88001f5fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0001fffd
On node 0 totalpages: 130954
  DMA zone: 56 pages used for memmap
  DMA zone: 2 pages reserved
  DMA zone: 3923 pages, LIFO batch:0
  DMA32 zone: 1736 pages used for memmap
  DMA32 zone: 125237 pages, LIFO batch:31
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at 20000000 (gap: 20000000:dffbc000)
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88001fc00000 s71936 r8192 d22272 u1048576
pcpu-alloc: s71936 r8192 d22272 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129160
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-rc5+ root=/dev/vda1 ro console=ttyS0,115200n8r
PID hash table entries: 2048 (order: 2, 16384 bytes)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 178516k/524276k available (2681k kernel code, 460k absent, 345300k reserved, 4129k data, 384k init)
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
Console: colour VGA+ 80x25
console [ttyS0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2394.385 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.77 BogoMIPS (lpj=23943850)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
mce: CPU supports 10 MCE banks
Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
ACPI: Core revision 20101013
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel QEMU Virtual CPU version 0.12.5 stepping 03
Booting Node   0, Processors  #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (9584.58 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: your CPUs had inconsistent MTRRdefType settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io  0xc000-0xc00f]
pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
pci 0000:00:01.2: reg 20: [io  0xc020-0xc03f]
pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff]
pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref]
pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
pci 0000:00:03.0: reg 10: [io  0xc040-0xc05f]
pci 0000:00:03.0: reg 14: [mem 0xf2020000-0xf2020fff]
pci 0000:00:04.0: [1af4:1001] type 0 class 0x000100
pci 0000:00:04.0: reg 10: [io  0xc080-0xc0bf]
pci 0000:00:04.0: reg 14: [mem 0xf2021000-0xf2021fff]
pci 0000:00:05.0: [1af4:1002] type 0 class 0x000500
pci 0000:00:05.0: reg 10: [io  0xc0c0-0xc0df]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d400 - 000000000009ffff 
reserve RAM buffer: 000000001fffd000 - 000000001fffffff 
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io  0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io  0x0060]
pnp 00:02: [io  0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io  0x03f2-0x03f5]
pnp 00:04: [io  0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 348
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:03.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:05.0: setting latency timer to 64
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
 vda: vda1
virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 43 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
cpuidle: using governor ladder
cpuidle: using governor menu
ioatdma: Intel(R) QuickData Technology Driver 4.00
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext2 filesystem) readonly on device 254:1.
Freeing unused kernel memory: 384k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 1396k freed
Freeing unused kernel memory: 1068k freed
Clocksource tsc unstable (delta = -66706149 ns)
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
udev: starting version 151
udevd (493): /proc/493/oom_adj is deprecated, please use /proc/493/oom_score_adj instead.
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Real Time Clock Driver v1.12b
EXT4-fs (vda1): re-mounted. Opts: (null)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present