Skip to content

Instantly share code, notes, and snippets.

@tachang

tachang/config.md Secret

Last active August 23, 2020 17:43
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save tachang/136da666e5cf650e14be7bbca0069465 to your computer and use it in GitHub Desktop.
Save tachang/136da666e5cf650e14be7bbca0069465 to your computer and use it in GitHub Desktop.
Download ZIP
Buildroot Configuration
Raw
config.md 
BR2_mipsel=y
BR2_mips_32r2=y
# BR2_MIPS_SOFT_FLOAT is not set
BR2_SVN="svn --non-interactive"
BR2_KERNEL_MIRROR="https://cdn.kernel.org/pub"
BR2_GNU_MIRROR="http://ftpmirror.gnu.org"
BR2_OPTIMIZE_3=y
BR2_SHARED_STATIC_LIBS=y
BR2_TOOLCHAIN_BUILDROOT_VENDOR="ingenic"
BR2_KERNEL_HEADERS_3_10=y
BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_PTHREAD_DEBUG=y
BR2_BINUTILS_VERSION_2_23_X=y
BR2_GCC_VERSION_4_7_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ENABLE_LOCALE_PURGE=y
BR2_ENABLE_LOCALE_WHITELIST="C en_US"
BR2_TARGET_GENERIC_HOSTNAME="openmiko"
BR2_TARGET_GENERIC_ISSUE="Welcome to OpenMiko"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_TARGET_GENERIC_ROOT_PASSWD="root"
BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
# BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
BR2_ROOTFS_OVERLAY="/src/overlay_minimal"
BR2_ROOTFS_POST_BUILD_SCRIPT="/src/buildscripts/post_fakeroot_script.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="/src/buildscripts/postbuild-hook.sh"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://raw.githubusercontent.com/anmaped/openfang/master/kernel-3.10.14.tar.xz"
BR2_LINUX_KERNEL_PATCH="/src/patches/kernel"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="/src/config/linux_minimal_defconfig"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_LZMA=y
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="uImage"
BR2_LINUX_KERNEL_IMAGE_NAME="uImage.lzma"
BR2_PACKAGE_LAME=y
BR2_PACKAGE_OPUS_TOOLS=y
BR2_PACKAGE_XZ=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_FREETYPE=y
BR2_PACKAGE_PCRE=y
BR2_PACKAGE_DROPBEAR=y
BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS=y
BR2_PACKAGE_RSYNC=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
BR2_PACKAGE_WPA_SUPPLICANT_EAP=y
BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG=y
BR2_TARGET_ROOTFS_INITRAMFS=y
BR2_TARGET_ROOTFS_SQUASHFS=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="isvp_t20_sfcnor_ddr128M"
BR2_TARGET_UBOOT_CUSTOM_GIT=y
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/openmiko/u-boot.git"
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="openmiko"
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-lzo-with-spl.bin"
BR2_PACKAGE_HOST_MTD=y
BR2_PACKAGE_HOST_PATCHELF=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y

CONFIG_MACH_XBURST=y
CONFIG_SOC_T20=y
CONFIG_EXTAL_CLOCK=24
# CONFIG_PM_POWERDOWN_P0 is not set
# CONFIG_RESET_KEEP_POWER is not set
# CONFIG_ARM_ELF_SUPPORT is not set
CONFIG_FORCE_MAX_ZONEORDER=15
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
CONFIG_HZ_100=y
CONFIG_PREEMPT=y
CONFIG_CROSS_COMPILE="output/host/usr/bin/mipsel-ingenic-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_LZMA=y
CONFIG_DEFAULT_HOSTNAME="openmiko"
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PANIC_TIMEOUT=3
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_ESP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_ANDROID_PARANOID_NETWORK is not set
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_CFG80211=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JZ_SFC_NORFLASH=y
CONFIG_SFC_DMA=y
CONFIG_ZRAM=y
CONFIG_ZRAM_LZ4_COMPRESS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_UID_STAT=y
CONFIG_BCM_PM_CORE=y
CONFIG_LOGGER=y
CONFIG_EEPROM_93CX6=m
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_RTL8188EU=m
CONFIG_RTL8189ES=m
CONFIG_RTL8189FS=m
CONFIG_RTLWIFI=y
# CONFIG_RTLWIFI_DEBUG is not set
# CONFIG_MT7601_STA is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_JZ47XX_UART=y
CONFIG_SERIAL_JZ47XX_CONSOLE=y
CONFIG_SERIAL_JZ47XX_UART1=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_V12_JZ=y
CONFIG_I2C0_V12_JZ=y
CONFIG_I2C0_SPEED=100
CONFIG_SOFT_I2C1_GPIO_V12_JZ=y
CONFIG_I2C1_SPEED=100
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_JZ_WDT=y
CONFIG_MFD_JZ_SADC_V13=y
CONFIG_MFD_JZ_SADC_AUX=y
CONFIG_MFD_JZ_TCU=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_V4L2_INT_DEVICE=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_TX_ISP=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
# CONFIG_DVB_AU8522_V4L is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set
CONFIG_JZ_IPU_V13=y
CONFIG_SOC_VPU=y
CONFIG_SOUND=y
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_JZ_I2S_V12=y
CONFIG_JZ_INTERNAL_CODEC_V12=y
CONFIG_T10_INTERNAL_CODEC=y
# CONFIG_HID is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_JZ_DWC2=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_OPTION=m
CONFIG_MMC=y
CONFIG_JZMMC_V12=y
CONFIG_JZMMC_V12_MMC0=y
CONFIG_JZMMC_V12_MMC0_PB_4BIT=y
CONFIG_MMC0_MAX_FREQ=48000000
CONFIG_JZMMC_V12_MMC1=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_SWITCH=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_INTF_ALARM is not set
CONFIG_DMADEVICES=y
CONFIG_XBURST_DMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_EXFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CONFIGFS_FS=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_JFFS2_FS=y
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_FTRACE is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=y
@tachang
Copy link
Author

tachang commented Aug 23, 2020 

isvp_t20# bootm 0x80600000
## Booting kernel from Legacy Image at 80600000 ...
   Image Name:   Linux-3.10.14
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    2488738 Bytes = 2.4 MiB
   Load Address: 80010000
   Entry Point:  80467a30
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.14 (root@172508ff6035) (gcc version 4.7.4 (Buildroot 2016.02) ) #29 PREEMPT Sun Aug 23 08:31:26 UTC 2020
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 RESET ERROR PC:947C7E08
[    0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst)
[    0.000000] FPU revision is: 00b70000
[    0.000000] CCLK:860MHz L2CLK:430Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 005b1000 @ 00010000 (usable)
[    0.000000]  memory: 0009f000 @ 005c1000 (usable after init)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 06800000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x067fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x067fffff]
[    0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pls check processor_id[0x00d00101],sc_jz not support!
[    0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes.
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 26416
[    0.000000] Kernel command line: console=ttyS1,115200n8 mem=104M@0x0 ispmem=8M@0x6800000 rmem=16M@0x7000000 init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag)
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 98388k/106496k available (4483k kernel code, 8108k reserved, 1342k data, 636k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:418
[    0.000000] clockevents_config_and_register success.
[    0.000023] Calibrating delay loop... 858.52 BogoMIPS (lpj=4292608)
[    0.087752] pid_max: default: 32768 minimum: 301
[    0.092738] Mount-cache hash table entries: 512
[    0.097846] Initializing cgroup subsys debug
[    0.102107] Initializing cgroup subsys freezer
[    0.107918] devtmpfs: initialized
[    0.112636] regulator-dummy: no parameters
[    0.116948] NET: Registered protocol family 16
[    0.139716] bio: create slab <bio-0> at 0
[    0.146099] jz-dma jz-dma: JZ SoC DMA initialized
[    0.151143] usbcore: registered new interface driver usbfs
[    0.156756] usbcore: registered new interface driver hub
[    0.162193] usbcore: registered new device driver usb
[    0.167466] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL)
[    0.173669]  (null): set:249  hold:250 dev=100000000 h=500 l=500
[    0.179800] media: Linux media interface: v0.10
[    0.184354] Linux video capture interface: v2.00
[    0.191116] Switching to clocksource jz_clocksource
[    0.196070] cfg80211: Calling CRDA to update world regulatory domain
[    0.203458] jz-dwc2 jz-dwc2: cgu clk gate get error
[    0.208396] jz-dwc2 jz-dwc2: regulator vbus get error
[    0.213478] DWC IN OTG MODE
[    0.366732] sft id =========================off
[    0.371324] dwc2 dwc2: Keep PHY ON
[    0.374712] dwc2 dwc2: Using Buffer DMA mode
[    0.578856] dwc2 dwc2: Core Release: 3.00a
[    0.582978] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
[    0.589306] dwc2 dwc2: new USB bus registered, assigned bus number 1
[    0.596843] hub 1-0:1.0: USB hub found
[    0.600585] hub 1-0:1.0: 1 port detected
[    0.604748] dwc2 dwc2: DWC2 Host Initialized
[    0.609237] NET: Registered protocol family 2
[    0.614236] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.621262] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.627774] TCP: Hash tables configured (established 1024 bind 1024)
[    0.634228] TCP: reno registered
[    0.637426] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.643384] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.649995] NET: Registered protocol family 1
[    0.654710] RPC: Registered named UNIX socket transport module.
[    0.660642] RPC: Registered udp transport module.
[    0.665476] RPC: Registered tcp transport module.
[    0.670178] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.682981] dwc2 dwc2: ID PIN CHANGED!
[    0.686743] init DWC as A_HOST
[    0.725091] freq_udelay_jiffys[0].max_num = 10
[    0.729519] cpufreq 	udelay 	loops_per_jiffy	
[    0.733994] 12000	 59885	 59885	
[    0.737202] 24000	 119771	 119771	
[    0.740645] 60000	 299428	 299428	
[    0.744132] 120000	 598857	 598857	
[    0.747621] 200000	 998095	 998095	
[    0.751152] 300000	 1497142	 1497142	
[    0.754891] 600000	 2994285	 2994285	
[    0.758569] 792000	 3952457	 3952457	
[    0.762277] 1008000	 5030400	 5030400	
[    0.766114] 1200000	 5988571	 5988571	
[    0.776290] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.782325] exFAT: Version 1.2.9
[    0.786731] NFS: Registering the id_resolver key type
[    0.791843] Key type id_resolver registered
[    0.796283] Key type id_legacy registered
[    0.800313] jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
[    0.806313] msgmni has been set to 192
[    0.811437] io scheduler noop registered
[    0.815483] io scheduler cfq registered (default)
[    0.823136] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1
[    0.831327] console [ttyS1] enabled, bootconsole disabled
[    0.831327] console [ttyS1] enabled, bootconsole disabled
[    0.847491] brd: module loaded
[    0.853395] loop: module loaded
[    0.857337] zram: Created 2 device(s) ...
[    0.861563] wifi regulator missing
[    0.865340] logger: created 256K log 'log_main'
[    0.870677] jz SADC driver registeres over!
[    0.876578] jz TCU driver register completed
[    0.881439] the id code = 1c7018, the flash name is EN25QH128A
[    0.887531] JZ SFC Controller for SFC channel 0 driver register
[    0.893716] 11 cmdlinepart partitions found on MTD device jz_sfc
[    0.899949] Creating 11 MTD partitions on "jz_sfc":
[    0.905020] 0x000000000000-0x000000040000 : "boot"
[    0.910686] 0x000000040000-0x000000240000 : "kernel"
[    0.916601] 0x000000240000-0x000000590000 : "root"
[    0.922232] 0x000000590000-0x000000630000 : "driver"
[    0.928126] 0x000000630000-0x000000ad0000 : "appfs"
[    0.933917] 0x000000ad0000-0x000000cd0000 : "backupk"
[    0.939828] 0x000000cd0000-0x000000d70000 : "backupd"
[    0.945832] 0x000000d70000-0x000000f70000 : "backupa"
[    0.951761] 0x000000f70000-0x000000fb0000 : "config"
[    0.957745] 0x000000fb0000-0x000000ff0000 : "para"
[    0.963437] 0x000000ff0000-0x000001000000 : "flag"
[    0.969063] SPI NOR MTD LOAD OK
[    0.972447] usbcore: registered new interface driver rtl8150
[    0.978405] usbcore: registered new interface driver r8152
[    0.984167] usbcore: registered new interface driver asix
[    0.989797] usbcore: registered new interface driver ax88179_178a
[    0.996609] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing
[    1.042635] jzmmc_v1.2 jzmmc_v1.2.0: register success!
[    1.048023] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing
[    1.093555] jzmmc_v1.2 jzmmc_v1.2.1: register success!
[    1.099330] ledtrig-cpu: registered to indicate activity on CPUs
[    1.105629] ------------ init codec driver start!
[    1.110566] jz_codec_probe: probe() start
[    1.114749] jz_codec_probe, codec iomem is :0xb0021000
[    1.120083] jz_codec_probe: probe() done
[    1.124226] i2s global init
[    1.127139] current codec is :8436f480
[    1.131281] i2s init success.
[    1.142545] usb 1-1: new high-speed USB device number 2 using dwc2
[    1.533275] TCP: cubic registered
[    1.536722] NET: Registered protocol family 17
[    1.542597] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.549858] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.556564] Warning: unable to open an initial console.
[    1.563153] Freeing unused kernel memory: 636K (805c1000 - 80660000)
[    1.570114] Failed to execute /init
[    1.573843] Failed to execute /linuxrc.  Attempting defaults...
[    1.580193] Kernel panic - not syncing: No init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[    1.593089] Rebooting in 3 seconds..

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment