Last active
December 25, 2022 13:19
-
-
Save tagliati/1d76e7590db9fec7ebb944f7a1ee0258 to your computer and use it in GitHub Desktop.
ender3 start end gcode
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
; start gcode | |
G92 E0 ; Reset Extruder | |
G28 ; Home all axes | |
G29; | |
G0 Z0; | |
G92 Z1.4; //para subir reduza o numero? | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position | |
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line | |
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little | |
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish | |
============================================================================== | |
;end gcode | |
G91 ;Relative positioning | |
G1 E-2 F2700 ;Retract a bit | |
G1 E-2 Z0.2 F2400 ;Retract and raise Z | |
G1 X5 Y5 F3000 ;Wipe out | |
G1 Z10 ;Raise Z more | |
G90 ;Absolute positioning | |
G1 X0 Y{machine_depth} ;Present print | |
M106 S0 ;Turn-off fan | |
M104 S0 ;Turn-off hotend | |
M140 S0 ;Turn-off bed | |
M84 X Y E ;Disable all steppers but Z |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment