wsltool.sh

#!/bin/bash

CHIP_NAME=$1
COM_NAME=$2
COM_SPEED=$3
ELF_FILE=$4

PROJECT_NAME=`basename $ELF_FILE`
BUILD_PATH=`dirname $ELF_FILE`
if [ `basename $BUILD_PATH` = "examples" ]; then
    BUILD_PATH=`dirname $BUILD_PATH`
fi

ESP_IDF=$(ls .embuild/espressif/esp-idf/ | tail -1)
ESP_IDF_SYS=`ls $BUILD_PATH/build/ | grep esp-idf-sys | tail -1`

if [ $CHIP_NAME = "esp32" ] || [ $CHIP_NAME = "esp32s2" ]; then
    BOOT_ADR=0x1000
else
    BOOT_ADR=0x0
fi

if [ $COM_NAME = "auto" ]; then
    COM_SCAN=`python.exe -m esptool chip_id|grep "Serial port"|tail -1`
    echo $COM_SCAN
    COM_NAME=${COM_SCAN:12:-1}
fi

echo "WSL Rust TOOL"

echo "PROJECT_NAME  : $PROJECT_NAME"
echo "ELF_FILE      : $ELF_FILE"
echo "BUILD_PATH    : $BUILD_PATH"
echo "ESP-IDF       : $ESP_IDF"
echo "ESP_IDF_SYS   : $ESP_IDF_SYS"
echo "CHIP_NAME     : $CHIP_NAME"
echo "BOOT_ADR      : $BOOT_ADR"
echo "COM_NAME      : $COM_NAME"
echo "COM_SPEED     : $COM_SPEED"

cp -f $ELF_FILE .embuild/elf
cp -f $BUILD_PATH/build/$ESP_IDF_SYS/out/build/bootloader/bootloader.bin .embuild/
cp -f $BUILD_PATH/build/$ESP_IDF_SYS/out/build/partition_table/partition-table.bin .embuild/

python.exe -m esptool --chip $CHIP_NAME elf2image .embuild\\elf
python.exe -m esptool --chip $CHIP_NAME --port $COM_NAME --baud $COM_SPEED --before default_reset --after hard_reset write_flash -z $BOOT_ADR .embuild/bootloader.bin 0x8000 .embuild/partition-table.bin 0x10000 .embuild/elf.bin 
python.exe .embuild\\espressif\\esp-idf\\$ESP_IDF\\tools\\idf_monitor.py --disable-address-decoding --port $COM_NAME .embuild/elf