Skip to content

Instantly share code, notes, and snippets.

@tedder

tedder/avr with force option, otherwise arduino options, hangs.txt Secret

Last active May 1, 2018 17:01
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save tedder/8edc3c598e427652f7004d9fd23e94ca to your computer and use it in GitHub Desktop.
Save tedder/8edc3c598e427652f7004d9fd23e94ca to your computer and use it in GitHub Desktop.
Download ZIP
attiny84 avr
Raw
avr with force option, otherwise arduino options, hangs.txt
$ /Applications/Arduino_183.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Users/ted/Library/Arduino15/packages/ATTinyCore/hardware/avr/1.1.5/avrdude.conf -v -pattiny84 -carduino -P/dev/cu.usbmodem1461 -b19200 -e -Uefuse:w:0xFF:m -Uhfuse:w:0b11010111:m -Ulfuse:w:0xFF:m -F
avrdude: Version 6.3, compiled on Jan 17 2017 at 12:01:35
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/Users/ted/Library/Arduino15/packages/ATTinyCore/hardware/avr/1.1.5/avrdude.conf"
User configuration file is "/Users/ted/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/cu.usbmodem1461
Using Programmer : arduino
Overriding Baud Rate : 19200
Setting bit clk period : 5.0
AVR Part : ATtiny84
Chip Erase delay : 15000 us
PAGEL : P00
BS2 : P00
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 6 4 0 no 512 4 0 4000 4500 0xff 0xff
flash 65 6 32 0 yes 8192 64 128 4500 4500 0xff 0xff
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Programmer Type : Arduino
Description : Arduino
Hardware Version: 2
Firmware Version: 1.18
Topcard : Unknown
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0xffffff (retrying)
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0xffffff (retrying)
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0xffffff
avrdude: Yikes! Invalid device signature.
avrdude: Expected signature for ATtiny84 is 1E 93 0C
avrdude: safemode: hfuse reads as FF
avrdude: safemode: efuse reads as FF
avrdude: erasing chip
avrdude: reading input file "0xFF"
avrdude: writing efuse (1 bytes):
Writing | ################################################## | 100% 0.00s
avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0xFF:
avrdude: load data efuse data from input file 0xFF:
avrdude: input file 0xFF contains 1 bytes
avrdude: reading on-chip efuse data:
Reading | ################################################## | 100% 0.00s
avrdude: verifying ...
avrdude: 1 bytes of efuse verified
avrdude: reading input file "0b11010111"
avrdude: writing hfuse (1 bytes):
Writing | | 0% 0.00s ***failed;
Writing | ################################################## | 100% 0.06s
avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0b11010111:
avrdude: load data hfuse data from input file 0b11010111:
avrdude: input file 0b11010111 contains 1 bytes
avrdude: reading on-chip hfuse data:
Reading | ################################################## | 100% 0.00s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0xff != 0xd7
avrdude: verification error; content mismatch
avrdude: safemode: hfuse reads as FF
avrdude: safemode: efuse reads as FF
avrdude: safemode: hfuse changed! Was d7, and is now ff
Would you like this fuse to be changed back? [y/n] y
Raw
compiled sketch fails.txt
Sketch uses 860 bytes (10%) of program storage space. Maximum is 8192 bytes.
Global variables use 9 bytes (1%) of dynamic memory, leaving 503 bytes for local variables. Maximum is 512 bytes.
/Applications/Arduino_183.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Users/ted/Library/Arduino15/packages/ATTinyCore/hardware/avr/1.1.5/avrdude.conf -v -pattiny84 -carduino -P/dev/cu.usbmodem1461 -b19200 -Uflash:w:/var/folders/8q/zb610w691_j2rl78z_npp93m0000gn/T/arduino_build_180588/Blink.ino.hex:i
avrdude: Version 6.3, compiled on Jan 17 2017 at 12:01:35
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/Users/ted/Library/Arduino15/packages/ATTinyCore/hardware/avr/1.1.5/avrdude.conf"
User configuration file is "/Users/ted/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/cu.usbmodem1461
Using Programmer : arduino
Overriding Baud Rate : 19200
Setting bit clk period : 5.0
AVR Part : ATtiny84
Chip Erase delay : 15000 us
PAGEL : P00
BS2 : P00
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 6 4 0 no 512 4 0 4000 4500 0xff 0xff
flash 65 6 32 0 yes 8192 64 128 4500 4500 0xff 0xff
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Programmer Type : Arduino
Description : Arduino
Hardware Version: 2
Firmware Version: 1.18
Topcard : Unknown
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0xffffff (retrying)
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0xffffff (retrying)
An error occurred while uploading the sketch
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0xffffff
avrdude: Yikes! Invalid device signature.
Double check connections and try again, or use -F to override
this check.
avrdude done. Thank you.
Raw
removed fuse options, success
$ /Applications/Arduino_183.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Users/ted/Library/Arduino15/packages/ATTinyCore/hardware/avr/1.1.5/avrdude.conf -v -pattiny84 -carduino -P/dev/cu.usbmodem1461 -b19200 -e -F
avrdude: Version 6.3, compiled on Jan 17 2017 at 12:01:35
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/Users/ted/Library/Arduino15/packages/ATTinyCore/hardware/avr/1.1.5/avrdude.conf"
User configuration file is "/Users/ted/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/cu.usbmodem1461
Using Programmer : arduino
Overriding Baud Rate : 19200
Setting bit clk period : 5.0
AVR Part : ATtiny84
Chip Erase delay : 15000 us
PAGEL : P00
BS2 : P00
RESET disposition : possible i/o
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 6 4 0 no 512 4 0 4000 4500 0xff 0xff
flash 65 6 32 0 yes 8192 64 128 4500 4500 0xff 0xff
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Programmer Type : Arduino
Description : Arduino
Hardware Version: 2
Firmware Version: 1.18
Topcard : Unknown
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0xffffff (retrying)
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0xffffff (retrying)
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0xffffff
avrdude: Yikes! Invalid device signature.
avrdude: Expected signature for ATtiny84 is 1E 93 0C
avrdude: safemode: hfuse reads as FF
avrdude: safemode: efuse reads as FF
avrdude: erasing chip
avrdude: safemode: hfuse reads as FF
avrdude: safemode: efuse reads as FF
avrdude: safemode: Fuses OK (E:FF, H:FF, L:FF)
avrdude done. Thank you.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment