Trendnet TEW712BR boot log
reboot: Reÿÿ | |
U-Boot 1.1.4 (Mar 2 2012 - 15:15:23) | |
AP121-2MB (ar9330) U-boot | |
DRAM: 32 MB | |
Top of RAM usable for U-Boot at: 82000000 | |
Reserving 161k for U-Boot at: 81fd4000 | |
Reserving 192k for malloc() at: 81fa4000 | |
Reserving 44 Bytes for Board Info at: 81fa3fd4 | |
Reserving 36 Bytes for Global Data at: 81fa3fb0 | |
Reserving 128k for boot params() at: 81f83fb0 | |
Stack Pointer at: 81f83f98 | |
Now running in RAM - U-Boot at: 81fd4000 | |
============================================ | |
Date:Mar 2 2012 Time:15:15:23 | |
Cameo Version: v1.00 Build:08 | |
Module Name: Treadnet TEW-712BR | |
============================================ | |
id read 0x100000ff | |
flash size 4194304, sector count = 64 | |
Flash: 4 MB | |
Using default environment | |
In: serial | |
Out: serial | |
Err: serial | |
Net: ag7240_enet_initialize... | |
: cfg1 0x5 cfg2 0x7114 | |
eth0: d8:eb:97:17:fa:50 | |
eth0 up | |
: cfg1 0xf cfg2 0x7214 | |
eth1: d8:eb:97:17:fa:4f | |
athrs26_reg_init_lan | |
ATHRS26: resetting s26 | |
ATHRS26: s26 reset done | |
eth1 up | |
eth0, eth1 | |
Hit any key to stop autoboot: 2 1 0 | |
## Booting image at 9f070000 ... | |
Image Name: MIPS OpenWrt Linux-3.18.20 | |
Created: 2015-09-11 16:06:32 UTC | |
Image Type: MIPS Linux Kernel Image (lzma compressed) | |
Data Size: 1098666 Bytes = 1 MB | |
Load Address: 80060000 | |
Entry Point: 80060000 | |
Verifying Checksum at 0x9f070040 ...OK | |
Uncompressing Kernel Image ... OK | |
No initrd | |
## Transferring control to Linux (at address 80060000) ... | |
## Giving linux memsize in bytes, 33554432 | |
Starting kernel ... | |
[ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 21:55:57 CEST 2015 | |
[ 0.000000] bootconsole [early0] enabled | |
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) | |
[ 0.000000] SoC: Atheros AR9330 rev 1 | |
[ 0.000000] Determined physical RAM map: | |
[ 0.000000] memory: 02000000 @ 00000000 (usable) | |
[ 0.000000] Initrd not found or empty - disabling initrd | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x00000000-0x01ffffff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff] | |
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 | |
[ 0.000000] Kernel command line: board=TEW-712BR console=ttyATH0,115200 mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware) rootfstype=squashfs,jffs2 noinitrd | |
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) | |
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.000000] Writing ErrCtl register=00000000 | |
[ 0.000000] Readback ErrCtl register=00000000 | |
[ 0.000000] Memory: 28516K/32768K available (2621K kernel code, 129K rwdata, 344K rodata, 224K init, 194K bss, 4252K reserved) | |
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ 0.000000] NR_IRQS:51 | |
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz | |
[ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) | |
[ 0.080000] pid_max: default: 32768 minimum: 301 | |
[ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.100000] NET: Registered protocol family 16 | |
[ 0.100000] MIPS: machine is TRENDnet TEW-712BR | |
[ 0.560000] Switched to clocksource MIPS | |
[ 0.560000] NET: Registered protocol family 2 | |
[ 0.570000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.570000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.570000] TCP: Hash tables configured (established 1024 bind 1024) | |
[ 0.580000] TCP: reno registered | |
[ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.600000] NET: Registered protocol family 1 | |
[ 0.600000] futex hash table entries: 256 (order: -1, 3072 bytes) | |
[ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 0.640000] msgmni has been set to 55 | |
[ 0.650000] io scheduler noop registered | |
[ 0.650000] io scheduler deadline registered (default) | |
[ 0.650000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled | |
[ 0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART | |
[ 0.670000] console [ttyATH0] enabled | |
[ 0.670000] console [ttyATH0] enabled | |
[ 0.680000] bootconsole [early0] disabled | |
[ 0.680000] bootconsole [early0] disabled | |
[ 0.690000] m25p80 spi0.0: found mx25l3205d, expected m25p80 | |
[ 0.700000] m25p80 spi0.0: mx25l3205d (4096 Kbytes) | |
[ 0.700000] 6 cmdlinepart partitions found on MTD device spi0.0 | |
[ 0.710000] Creating 6 MTD partitions on "spi0.0": | |
[ 0.710000] 0x000000000000-0x000000010000 : "u-boot" | |
[ 0.720000] 0x000000010000-0x000000020000 : "art" | |
[ 0.720000] 0x000000020000-0x000000030000 : "mac" | |
[ 0.730000] 0x000000030000-0x000000040000 : "nvram" | |
[ 0.730000] 0x000000040000-0x000000070000 : "language" | |
[ 0.740000] 0x000000070000-0x000000400000 : "firmware" | |
[ 0.750000] 2 uimage-fw partitions found on MTD device firmware | |
[ 0.760000] 0x000000070000-0x00000017c3ea : "kernel" | |
[ 0.760000] 0x00000017c3ea-0x000000400000 : "rootfs" | |
[ 0.770000] mtd: device 7 (rootfs) set to be root filesystem | |
[ 0.770000] 1 squashfs-split partitions found on MTD device rootfs | |
[ 0.780000] 0x0000003a0000-0x000000400000 : "rootfs_data" | |
[ 0.800000] libphy: ag71xx_mdio: probed | |
[ 1.400000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch | |
[ 1.430000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII | |
[ 2.020000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] | |
[ 2.030000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII | |
[ 2.030000] TCP: cubic registered | |
[ 2.030000] NET: Registered protocol family 17 | |
[ 2.040000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. | |
[ 2.050000] Bridge firewalling registered | |
[ 2.060000] 8021q: 802.1Q VLAN Support v1.8 | |
[ 2.070000] VFS: Mounted root (squashfs filesystem) readonly on device 31:7. | |
[ 2.080000] Freeing unused kernel memory: 224K (80368000 - 803a0000) | |
[ 3.390000] init: Console is alive | |
[ 3.390000] init: - watchdog - | |
[ 5.480000] init: - preinit - | |
[ 6.220000] random: procd urandom read with 9 bits of entropy available | |
Press the [f] key and hit [enter] to enter failsafe mode | |
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
[ 9.510000] jffs2: notice: (344) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. | |
[ 9.530000] mount_root: switching to jffs2 overlay | |
[ 9.590000] procd: - early - | |
[ 9.600000] procd: - watchdog - | |
[ 10.400000] procd: - ubus - | |
[ 11.410000] procd: - init - | |
Please press Enter to activate this console. | |
[ 12.440000] NET: Registered protocol family 10 | |
[ 12.450000] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 12.470000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 | |
[ 12.480000] Backport generated by backports.git backports-20150129-0-gdd4a670 | |
[ 12.490000] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 12.500000] nf_conntrack version 0.5.0 (449 buckets, 1796 max) | |
[ 12.550000] xt_time: kernel timezone is -0000 | |
[ 12.580000] cfg80211: Calling CRDA to update world regulatory domain | |
[ 12.610000] cfg80211: World regulatory domain updated: | |
[ 12.610000] cfg80211: DFS Master region: unset | |
[ 12.610000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) | |
[ 12.620000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 12.630000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 12.640000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 12.650000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 12.660000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) | |
[ 12.670000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) | |
[ 12.670000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 12.680000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) | |
[ 12.740000] PPP generic driver version 2.4.2 | |
[ 12.750000] NET: Registered protocol family 24 | |
[ 12.850000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 | |
[ 12.860000] cfg80211: Calling CRDA for country: US | |
[ 12.860000] cfg80211: Regulatory domain changed to country: US | |
[ 12.870000] cfg80211: DFS Master region: FCC | |
[ 12.870000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) | |
[ 12.880000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) | |
[ 12.890000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) | |
[ 12.900000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) | |
[ 12.910000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) | |
[ 12.920000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) | |
[ 21.310000] device eth0 entered promiscuous mode | |
[ 21.340000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready | |
[ 21.370000] device eth1 entered promiscuous mode | |
[ 21.370000] br-lan: port 2(eth1) entered forwarding state | |
[ 21.370000] br-lan: port 2(eth1) entered forwarding state | |
[ 21.380000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready | |
[ 22.510000] br-lan: port 2(eth1) entered disabled state | |
[ 23.060000] cfg80211: Calling CRDA for country: GB | |
[ 23.060000] cfg80211: Regulatory domain changed to country: GB | |
[ 23.070000] cfg80211: DFS Master region: ETSI | |
[ 23.070000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) | |
[ 23.080000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 23.090000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) | |
[ 23.100000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) | |
[ 23.110000] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) | |
[ 23.110000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) | |
[ 25.350000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready | |
[ 25.360000] device wlan0 entered promiscuous mode | |
[ 25.990000] br-lan: port 3(wlan0) entered forwarding state | |
[ 26.000000] br-lan: port 3(wlan0) entered forwarding state | |
[ 26.000000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready | |
[ 28.000000] br-lan: port 3(wlan0) entered forwarding state |
U-Boot 1.1.4 (Mar 2 2012 - 15:15:23) | |
AP121-2MB (ar9330) U-boot | |
DRAM: 32 MB | |
Top of RAM usable for U-Boot at: 82000000 | |
Reserving 161k for U-Boot at: 81fd4000 | |
Reserving 192k for malloc() at: 81fa4000 | |
Reserving 44 Bytes for Board Info at: 81fa3fd4 | |
Reserving 36 Bytes for Global Data at: 81fa3fb0 | |
Reserving 128k for boot params() at: 81f83fb0 | |
Stack Pointer at: 81f83f98 | |
Now running in RAM - U-Boot at: 81fd4000 | |
============================================ | |
Date:Mar 2 2012 Time:15:15:23 | |
Cameo Version: v1.00 Build:08 | |
Module Name: Treadnet TEW-712BR | |
============================================ | |
id read 0x100000ff | |
flash size 4194304, sector count = 64 | |
Flash: 4 MB | |
Using default environment | |
In: serial | |
Out: serial | |
Err: serial | |
Net: ag7240_enet_initialize... | |
: cfg1 0x5 cfg2 0x7114 | |
eth0: d8:eb:97:17:fa:50 | |
eth0 up | |
: cfg1 0xf cfg2 0x7214 | |
eth1: d8:eb:97:17:fa:4f | |
athrs26_reg_init_lan | |
ATHRS26: resetting s26 | |
ATHRS26: s26 reset done | |
eth1 up | |
eth0, eth1 | |
Hit any key to stop autoboot: 2 0 | |
ar7240> | |
ar7240> hjelp help | |
fake - fake | |
? - alias for 'help' | |
boot - boot default, i.e., run 'bootcmd' | |
bootd - boot default, i.e., run 'bootcmd' | |
bootm - boot application image from memory | |
cp - memory copy | |
erase - erase FLASH memory | |
eth_soft_led - start the ethernet software led control | |
help - print online help | |
httpboot- entering the backup mode. | |
md - memory display | |
mm - memory modify (auto-incrementing) | |
mtest - simple RAM test | |
mw - memory write (fill) | |
nm - memory modify (constant address) | |
ping - send ICMP ECHO_REQUEST to network host | |
printenv- print environment variables | |
progmac - Set ethernet MAC addresses | |
reset - Perform RESET of the CPU | |
run - run commands in an environment variable | |
setenv - set environment variables | |
tftpboot- boot image via network using TFTP protocol | |
version - print monitor version | |
ar7240> printenv | |
bootargs=console=ttyS0,115200 root=31:06 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:64k(u-boot),64k(ART),64k(mac),64k(nvram),192k(language),896k(uImage),2752k(rootfs) | |
bootcmd=bootm 0x9f070000 | |
bootdelay=2 | |
baudrate=115200 | |
ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee | |
ipaddr=192.168.10.1 | |
serverip=192.168.10.100 | |
stdin=serial | |
stdout=serial | |
stderr=serial | |
ethact=eth0 | |
Environment size: 369/65532 bytes |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment