foo1

[    0.112344,0] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
[    0.116810,1] cpuidle: using governor ladder
[    0.123472,2] cpuidle: using governor menu
[    0.130108,2] cpuidle: using governor qcom
[    0.131784,2] vdso: 2 pages (1 code @ ffffffc000e96000, 1 data @ ffffffc001444000)
[    0.131821,2] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.132670,2] software IO TLB: mapped [mem 0xed400000-0xed800000] (4MB)
[    0.133472,2] DMA: preallocated 256 KiB pool for atomic allocations
[    0.138307,2] __of_mpm_init(): MPM driver mapping exists
[    0.140063,2] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
[    0.156045,2] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.159576,2] sps:sps is ready.
[    0.161490,2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
[    0.161504,2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[    0.161539,2] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[    0.161550,2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[    0.164653,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
[    0.164742,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
[    0.165541,2] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.165551,2] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.167946,2] smd_channel_probe_now: allocation table not initialized
[    0.169010,2] smd_channel_probe_now: allocation table not initialized
[    0.169829,2] smd_channel_probe_now: allocation table not initialized
[    0.171204,2] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[    0.171531,2] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[    0.176459,2] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
[    0.179063,2] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[    0.181498,2] pm8953_s5: 400 <--> 1140 mV at 870 mV normal idle 
[    0.181695,2] pm8953_s5_avs_limit: 400 <--> 1140 mV 
[    0.181810,2] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
[    0.186876,2] spmi spmi-0: of_spmi_register_devices: invalid sid on /soc/qcom,spmi@200f000/qcom,pm8950@0
[    0.187338,2] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
[    0.187784,2] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
[    0.188031,2] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
[    0.188546,2] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
[    0.190053,2] apc_mem_acc_corner: 0 <--> 0 mV 
[    0.190942,2] cpr4_msm8953_apss_read_fuse_data: apc_corner: speed bin = 2
[    0.190953,2] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR fusing revision = 3
[    0.190962,2] cpr4_msm8953_apss_read_fuse_data: apc_corner: foundry id = 2
[    0.190972,2] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[    0.191008,2] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[    0.191115,2] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused   LowSVS: open-loop= 625000 uV
[    0.191124,2] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 690000 uV
[    0.191133,2] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 795000 uV
[    0.191142,2] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
[    0.191200,2] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused   LowSVS: quot[ 7]= 467
[    0.191211,2] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 574, quot_offset[ 7]= 105
[    0.191221,2] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 784, quot_offset[ 7]= 205
[    0.191231,2] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1016, quot_offset[ 7]= 230
[    0.191501,2] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 7, aging RO scale = 2800 QUOT/V
[    0.191676,2] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop
[    0.191789,2] apc_corner: 0 <--> 0 mV at 0 mV 
[    0.192593,2] gfx_mem_acc_corner: 0 <--> 0 mV 
[    0.192989,2] GFX_LDO: msm_gfx_ldo_parse_dt: Unable to parse CX parameters rc=-517
[    0.193020,2] GFX_LDO: msm_gfx_ldo_probe: Unable to pasrse dt rc=-517
[    0.205172,2] persistent_ram: persistent_ram: paddr: 00000000ef000000, vaddr: ffffff80003c0000, buf size = 0x1fff4
[    0.205194,2] persistent_ram: persistent_ram: paddr: 00000000ef020000, vaddr: ffffff8001900000, buf size = 0x3fff4
[    0.205354,2] persistent_ram: persistent_ram: paddr: 00000000ef060000, vaddr: ffffff80003a6000, buf size = 0x7f4
[    0.206172,2] console [pstore-1] enabled
[    0.206179,2] pstore: Registered ramoops as persistent store backend
[    0.206188,2] ramoops: attached 0x80000@0xef000000, ecc: 0/0
[    0.207014,0] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.207871,0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[    0.207996,0] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
[    0.208005,0] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[    0.208046,0] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[    0.208058,0] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[    0.208268,0] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
[    0.208351,0] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
[    0.208424,0] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.208432,0] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.209162,0] pm8953_s1: 870 <--> 1156 mV at 1000 mV normal idle 
[    0.209714,0] pm8953_s2_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.210104,0] pm8953_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.210464,0] pm8953_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.210927,0] pm8953_s3: 1225 mV normal idle 
[    0.211425,0] pm8953_s4: 1900 <--> 2050 mV at 1900 mV normal idle 
[    0.211899,0] pm8953_s7_level: 0 <--> 0 mV at 0 mV normal idle 
[    0.212259,0] pm8953_s7_level_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.212599,0] pm8953_s7_level_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.213100,0] pm8953_l1: 1000 <--> 1100 mV at 1000 mV normal idle 
[    0.213596,0] pm8953_l2: 1000 mV normal idle 
[    0.214082,0] pm8953_l3: 925 mV normal idle 
[    0.214541,0] pm8953_l5: 1800 mV normal idle 
[    0.215341,0] pm8953_l6: 1800 mV normal idle 
[    0.215822,0] pm8953_l7: 1800 <--> 1900 mV at 1800 mV normal idle 
[    0.216183,0] pm8953_l7_ao: 1800 <--> 1900 mV at 1800 mV normal idle 
[    0.216645,0] pm8953_l8: 2900 mV normal idle 
[    0.217177,0] pm8953_l9: 3000 <--> 3300 mV at 3000 mV normal idle 
[    0.217640,0] pm8953_l10: 1800 mV normal idle 
[    0.218127,0] pm8953_l11: 2950 mV normal idle 
[    0.218595,0] pm8953_l12: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.219085,0] pm8953_l13: 3125 mV normal idle 
[    0.219542,0] pm8953_l16: 1800 mV normal idle 
[    0.220065,0] pm8953_l17: 2850 mV normal idle 
[    0.220537,0] pm8953_l19: 1200 <--> 1350 mV at 1200 mV normal idle 
[    0.221718,1] pm8953_l22: 2850 mV normal idle 
[    0.222223,1] pm8953_l23: 975 <--> 1225 mV at 1200 mV normal idle 
[    0.222951,1] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
[    0.222962,1] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
[    0.222972,1] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
[    0.222985,1] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
[    0.222994,1] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
[    0.223004,1] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
[    0.223238,1] msm_gfx_ldo: 0 <--> 0 mV at 0 mV 
[    0.223476,1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.224371,1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[    0.225084,1] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[    0.227240,2] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 2
[    0.244806,2] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
[    0.244984,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
[    0.247173,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
[    0.247215,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
[    0.247248,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
[    0.247275,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
[    0.247308,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
[    0.247335,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
[    0.247362,2] ramp_lmh_sid: Use Default LMH SID
[    0.247379,2] ramp_dfs_sid: Use Default DFS SID
[    0.247396,2] ramp_link_sid: Use Default Link SID
[    0.247456,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
[    0.247484,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
[    0.247516,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
[    0.247544,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
[    0.247575,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
[    0.247603,2] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
[    0.247629,2] ramp_lmh_sid: Use Default LMH SID
[    0.247646,2] ramp_dfs_sid: Use Default DFS SID
[    0.247663,2] ramp_link_sid: Use Default Link SID
[    0.247722,2] clock_rcgwr_init: RCGwR  Init Completed
[    0.248077,2] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
[    0.248086,2] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
[    0.248093,2] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7
[    0.248101,2] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
[    0.248108,2] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7
[    0.249903,3] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
[    0.286078,2] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
[    0.286125,2] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
[    0.289646,2] KPI: Bootloader start count = 76073
[    0.289657,2] KPI: Bootloader end count = 360854
[    0.289663,2] KPI: Bootloader display count = 754962374
[    0.289670,2] KPI: Bootloader load kernel count = 4276025115
[    0.289676,2] KPI: Kernel MPM timestamp = 378748
[    0.289683,2] KPI: Kernel MPM Clock frequency = 32768
[    0.289707,2] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=8, hw_plat_ver=65536
[    0.289707,2]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=3192586957
[    0.290850,2] dummy_vreg: no parameters
[    0.291928,2] SCSI subsystem initialized
[    0.292587,2] usbcore: registered new interface driver usbfs
[    0.292640,2] usbcore: registered new interface driver hub
[    0.292844,2] usbcore: registered new device driver usb
[    0.293789,2] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.294165,2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.294205,2] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.295374,2] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[    0.295626,2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.295661,2] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.295861,0] i2c-msm-v2 78b7000.i2c: irq:177 when no active transfer
[    0.296438,1] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
[    0.296644,1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.296681,1] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[    0.297958,2] i2c-msm-v2 7af6000.i2c: probing driver i2c-msm-v2
[    0.298191,2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.298228,2] i2c-msm-v2 7af6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[    0.299078,0] media: Linux media interface: v0.10
[    0.299126,0] Linux video capture interface: v2.00
[    0.299179,0] EDAC MC: Ver: 3.0.0
[    0.333551,1] cpufreq: driver msm up and running
[    0.333954,1] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
[    0.334108,1] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
[    0.334348,1] ION heap system created
[    0.334440,1] ION heap mm created at 0x00000000f4c00000 with size b400000
[    0.334447,1] ION heap qsecom created at 0x00000000f3c00000 with size 1000000
[    0.334981,1] msm_bus_fabric_init_driver
[    0.342758,1] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[    0.342776,1] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key hold)
[    0.342898,1] input: qpnp_pon as /devices/virtual/input/input0
[    0.343194,1] pon_spare_reg: no parameters
[    0.343235,1] qcom,qpnp-power-on qpnp-power-on-13: No PON config. specified
[    0.343282,1] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
[    0.343297,1] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    0.343517,4] PMIC@SID0: (null) v1.0 options: 2, 2, 0, 0
[    0.343608,4] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
[    0.344418,4] ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.344442,4] ipa ipa_sps_irq_control_all:945 EP (2) not allocated.
[    0.344453,4] ipa ipa_sps_irq_control_all:945 EP (5) not allocated.
[    0.345761,5] sps:BAM 0x0000000007904000 is registered.
[    0.346179,5] sps:BAM 0x0000000007904000 (va:0xffffff8001640000) enabled: ver:0x27, number of pipes:20
[    0.348757,5] IPA driver initialization was successful.
[    0.349588,5] gdsc_venus: no parameters
[    0.349758,5] gdsc_mdss: no parameters
[    0.350013,5] gdsc_jpeg: no parameters
[    0.350336,5] gdsc_vfe: no parameters
[    0.350632,5] gdsc_vfe1: no parameters
[    0.350787,5] gdsc_cpp: no parameters
[    0.350913,5] gdsc_oxili_gx: no parameters
[    0.350954,5] gdsc_oxili_gx: supplied by msm_gfx_ldo
[    0.351090,5] gdsc_venus_core0: fast normal 
[    0.351205,5] gdsc_oxili_cx: no parameters
[    0.351293,5] gdsc_usb30: no parameters
[    0.352026,5] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[    0.352031,5] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[    0.352045,5] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[    0.352441,5] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
[    0.352459,5] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[    0.352463,5] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[    0.352474,5] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[    0.353564,5] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
[    0.353806,5] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
[    0.354157,5] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001c80000, with 21 ctx banks
[    0.358124,5] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0
[    0.358226,5] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
[    0.358327,5] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
[    0.358434,5] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
[    0.358540,5] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
[    0.358645,5] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
[    0.358750,5] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
[    0.358872,5] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
[    0.358994,5] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context q6 using bank 9
[    0.359119,5] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
[    0.359241,5] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
[    0.359361,5] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
[    0.359487,5] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
[    0.359612,5] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
[    0.359735,5] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
[    0.359864,5] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
[    0.359988,5] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
[    0.360121,5] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
[    0.360243,5] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
[    0.360365,5] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context ipa using bank 24
[    0.360489,5] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
[    0.362739,5] arm-smmu 1c40000.arm,smmu-kgsl: regulator defer delay 80
[    0.364291,5] Advanced Linux Sound Architecture Driver Initialized.
[    0.364858,5] Bluetooth: ffffffc04eecfd40
[    0.364872,5] NET: Registered protocol family 31
[    0.364875,5] Bluetooth: ffffffc04eecfd40
[    0.364881,5] Bluetooth: ffffffc04eecfd20Bluetooth: ffffffc04eecfd00
[    0.364895,5] Bluetooth: ffffffc04eecfd00<6>[    0.365125,5] cfg80211: Calling CRDA to update world regulatory domain
[    0.365138,5] cfg80211: World regulatory domain updated:
[    0.365141,5] cfg80211:  DFS Master region: unset
[    0.365144,5] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    0.365149,5] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.365153,5] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.365157,5] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    0.365161,5] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.365164,5] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.365169,5] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.365173,5] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.365177,5] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    0.365298,4] pcie:pcie_init.
[    0.366302,1] ibb_reg: 4600 <--> 6000 mV at 5500 mV 
[    0.366498,1] lab_reg: 4600 <--> 6000 mV at 5500 mV 
[    0.367243,5] Switched to clocksource arch_sys_counter
[    0.390095,5] NET: Registered protocol family 2
[    0.390399,5] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.390540,5] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.390828,5] TCP: Hash tables configured (established 32768 bind 32768)
[    0.390862,5] TCP: reno registered
[    0.390868,5] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.390916,5] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.391048,5] NET: Registered protocol family 1
[    0.391062,5] PCI: CLS 0 bytes, default 64
[    0.392071,5] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
[    0.392488,5] Trying to unpack rootfs image as initramfs...
[    1.717867,5] Freeing initrd memory: 6540K
[    1.721330,5] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.721649,5] vmscan: error setting kswapd cpu affinity mask
[    1.724040,5] VFS: Disk quotas dquot_6.5.2
[    1.724098,5] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.724887,5] Registering sdcardfs 0.1
[    1.725000,5] fuse init (API version 7.23)
[    1.725292,5] msgmni has been set to 5606
[    1.726566,5] Key type asymmetric registered
[    1.726570,5] Asymmetric key parser 'x509' registered
[    1.726630,5] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.726634,5] io scheduler noop registered (default)
[    1.726638,5] io scheduler deadline registered
[    1.726684,5] io scheduler cfq registered
[    1.726707,5] io scheduler bfq registered
[    1.726709,5] BFQ I/O-scheduler: v7r8
[    1.729295,5] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
[    1.729315,5] 0xffffffc00038b320->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
[    1.729833,5] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
[    1.730259,5] No change in context(0==0), skip
[    1.730965,5] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
[    1.730980,5] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
[    1.730984,5] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
[    1.730995,5] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
[    1.731007,5] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
[    1.731015,5] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[    1.731103,5] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[    1.731288,5] xlog_status: enable:0, panic:1, dump:2
[    1.731744,5] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
[    1.733022,5] mdss_smmu_util_parse_dt_clock: clocks are not defined
[    1.733071,5] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[    1.733085,5] mdss_smmu_util_parse_dt_clock: clocks are not defined
[    1.733119,5] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[    1.734008,5] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[    1.734017,5] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[    1.734025,5] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[    1.734414,5] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[    1.734772,5] mdss_panel_parse_panel_config_dt: BL: panel=mipi_mot_vid_boe_1080p_520, manufacture_id(0xDA)= 0x1A controller_ver(0xDB)= 0xD2 controller_drv_ver(0XDC)= 0x46, full=0x000000000046D21A
[    1.734779,5] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_mot_boe_520_1080p_vid_v0 panel_name:qcom,mdss_dsi_mot_boe_520_1080p_vid_v0
[    1.734827,5] mdss_dsi_panel_init: Panel Name = mipi_mot_vid_boe_1080p_520
[    1.734938,5] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_boe_520_1080p_vid_v0" (ffffffc0abc84c00)
[    1.734952,5] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[    1.734967,5] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[    1.734978,5] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
[    1.735055,5] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
[    1.735068,5] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
[    1.735096,5] mdss_dsi_parse_panel_features: ulps feature disabled
[    1.735101,5] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[    1.735107,5] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[    1.735129,5] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
[    1.735141,5] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
[    1.735177,5] mdss_panel_parse_param_prop: HBM feature enabled with 2 dt cmds
[    1.735180,5] mdss_panel_parse_param_prop: HBM type = 1
[    1.735204,5] mdss_panel_parse_param_prop: CABC feature enabled with 3 dt cmds
[    1.735209,5] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
[    1.735222,5] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
[    1.735242,5] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[    1.735249,5] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[    1.735257,5] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[    1.735410,5] mdss_dsi_parse_gpio_params:4141, TE gpio not specified
[    1.735421,5] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[    1.735452,5] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
[    1.735463,5] 0xffffffc0003d85fc->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
[    1.735476,5] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001886000 ctrl_size=400 phy_base=ffffff80018b2400 phy_size=580
[    1.735543,5] dsi_panel_device_register: Continuous splash enabled
[    1.735676,5] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
[    1.736998,5] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
[    1.737101,5] mdss_dsi_status_init: DSI status check interval:8000
[    1.737652,5] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
[    1.737966,5] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
[    1.738293,5] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
[    1.738545,5] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
[    1.738629,5] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
[    1.738684,5] mdss_mdp_splash_parse_dt: splash mem child node is not present
[    1.740150,5] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[    1.740178,5] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[    1.742654,5] In memshare_probe, Memshare probe success
[    1.743717,5] msm_rpm_log_probe: OK
[    1.744677,5] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
[    1.746110,5] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
[    1.747833,5] bootinfo: Boot sequence = 0
[    1.747847,5] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'potter', radio = 0x0, radio_str = 'EMEA', system_rev = 0x83b0, system_serial = 0xcd024bbe00000000, machine = '', barcode = 'ZY224638GW', baseband = '', carrier = 'retgb', pu_reason = 0x00100000
[    1.747872,5] ACPU Bin is not available.
[    1.747912,5] mmi_storage_info :eMMC: 32GB SAMSUNG RX1BMB FV=0000000000000007
[    1.748335,5] msm_serial_hs module loaded
[    1.755886,5] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
[    1.760701,5] brd: module loaded
[    1.761934,5] loop: module loaded
[    1.762122,5] zram: Added device: zram0
[    1.762471,5] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
[    1.762490,5] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[    1.762496,5] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[    1.762500,5] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
[    1.762981,5] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[    1.764734,6] alsa-to-h2w soc:alsa_to_h2w: alsa_to_h2w_probe success
[    1.764891,6] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    1.764894,6] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    1.764937,6] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    1.764940,6] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    1.764981,6] i2c-core: driver [tasha-i2c-core] using legacy suspend method
[    1.764984,6] i2c-core: driver [tasha-i2c-core] using legacy resume method
[    1.765197,6] Loading pn544 driver
[    1.765310,6] nfc: succeed in obtaining nfc_clk from msm pmic
[    1.765440,6] 5-0028 supply vdd not found, using dummy regulator
[    1.765744,6] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    1.766208,6] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
[    1.766215,6] qce 720000.qcedev: CE device = 0x0
[    1.766215,6] IO base, CE = 0xffffff8001b40000
[    1.766215,6] Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[    1.766215,6] IO base BAM = 0x0000000000000000
[    1.766215,6] BAM IRQ 193
[    1.766215,6] Engines Availability = 0x2010853
[    1.766329,6] sps:BAM 0x0000000000704000 is registered.
[    1.766465,6] sps:BAM 0x0000000000704000 (va:0xffffff8001f40000) enabled: ver:0x27, number of pipes:8
[    1.766646,6] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 193
[    1.769166,6] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    1.769778,6] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
[    1.769784,6] qcrypto 720000.qcrypto: CE device = 0x0
[    1.769784,6] IO base, CE = 0xffffff8002000000
[    1.769784,6] Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
[    1.769784,6] IO base BAM = 0x0000000000000000
[    1.769784,6] BAM IRQ 193
[    1.769784,6] Engines Availability = 0x2010853
[    1.770040,6] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 193
[    1.772024,6] qcrypto 720000.qcrypto: qcrypto-ecb-aes
[    1.772089,6] qcrypto 720000.qcrypto: qcrypto-cbc-aes
[    1.772157,6] qcrypto 720000.qcrypto: qcrypto-ctr-aes
[    1.772225,6] qcrypto 720000.qcrypto: qcrypto-ecb-des
[    1.772288,6] qcrypto 720000.qcrypto: qcrypto-cbc-des
[    1.772353,6] qcrypto 720000.qcrypto: qcrypto-ecb-3des
[    1.772417,6] qcrypto 720000.qcrypto: qcrypto-cbc-3des
[    1.772480,6] qcrypto 720000.qcrypto: qcrypto-xts-aes
[    1.772544,6] qcrypto 720000.qcrypto: qcrypto-sha1
[    1.772608,6] qcrypto 720000.qcrypto: qcrypto-sha256
[    1.772671,6] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[    1.772734,6] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[    1.772798,6] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[    1.772863,6] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[    1.772927,6] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[    1.772994,6] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[    1.773058,6] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
[    1.773122,6] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
[    1.773186,6] qcrypto 720000.qcrypto: qcrypto-aes-ccm
[    1.773250,6] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
[    1.773914,6] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[    1.774035,6] ICE IRQ = 194
[    1.774583,6] SCSI Media Changer driver v0.25 
[    1.775839,6] sps: BAM device 0x0000000007884000 is not registered yet.
[    1.775956,6] sps:BAM 0x0000000007884000 is registered.
[    1.776391,6] sps:BAM 0x0000000007884000 (va:0xffffff8001c60000) enabled: ver:0x19, number of pipes:12
[    1.776846,6] spi4.0 supply sensor3 not found, using dummy regulator
[    1.777588,6] input: sensorprocessor as /devices/virtual/input/input1
[    1.777621,6] stml0xx spi4.0: stml0xx_akm_init
[    1.778301,6] spi_qsd 7af8000.spi: init_resources: unable to get core_clk
[    1.778549,6] spi_master spi1: will run message pump with realtime priority
[    1.779002,6] tun: Universal TUN/TAP device driver, 1.6
[    1.779005,6] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.780395,6] PPP generic driver version 2.4.2
[    1.780474,6] PPP BSD Compression module registered
[    1.780477,6] PPP Deflate Compression module registered
[    1.780494,6] PPP MPPE Compression module registered
[    1.780498,6] NET: Registered protocol family 24
[    1.780987,6] wcnss_wlan probed in built-in mode
[    1.781440,6] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.781506,6] usbcore: registered new interface driver pegasus
[    1.781531,6] usbcore: registered new interface driver asix
[    1.781551,6] usbcore: registered new interface driver ax88179_178a
[    1.781570,6] usbcore: registered new interface driver cdc_ether
[    1.781590,6] usbcore: registered new interface driver net1080
[    1.781611,6] usbcore: registered new interface driver cdc_subset
[    1.781630,6] usbcore: registered new interface driver zaurus
[    1.781650,6] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.781747,6] usbcore: registered new interface driver cdc_ncm
[    1.782042,6] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[    1.782713,6] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[    1.782731,6] hyp_assign_table: Failed to assign memory protection, ret = -5
[    1.782737,6] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f2d00000 size=1572864 err=-5
[    1.782836,6] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[    1.785997,6] msm-dwc3 7000000.ssusb: unable to get dbm device
[    1.786671,6] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.786845,6] ehci-pci: EHCI PCI platform driver
[    1.786870,6] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    1.787053,6] usbcore: registered new interface driver cdc_acm
[    1.787056,6] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.787083,6] usbcore: registered new interface driver usb-storage
[    1.787136,6] usbcore: registered new interface driver usbserial
[    1.787159,6] usbcore: registered new interface driver usb_ehset_test
[    1.787563,6] gbridge_init: gbridge_init successs.
[    1.787723,6] mousedev: PS/2 mouse device common for all mice
[    1.787914,6] usbcore: registered new interface driver xpad
[    1.788257,6] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-aod[0]
[    1.788373,6] synaptics_dsx_i2c 3-0020: no valid patch sets found
[    1.788379,6] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-fps[5]
[    1.788391,6] synaptics_dsx_dt_parse_modifiers: using fingerprint sensor detection
[    1.788396,6] synaptics_dsx_dt_parse_modifier: using touch clip area in fps-active
[    1.788428,6] synaptics_dsx_of_init: using gpio config
[    1.788482,6] synaptics_dsx_i2c 3-0020: synaptics_rmi4_probe: Failed to get regulator
[    1.788490,6] 3-0020 supply vdd_quirk not found, using dummy regulator
[    1.803893,6] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok)
[    1.807550,6] synaptics_dsx_i2c 3-0020: synaptics_rmi4_cap_button_map: cap_button_map is 				NULL in board file
[    1.809627,6] synaptics_dsx_i2c 3-0020: F51 ctrl[0]=02
[    1.809632,6] synaptics_dsx_i2c 3-0020: F51 ctrl[4]=14
[    1.811734,6] synaptics_rmi4_query_device: touch interrupt status and finger data not contiguous
[    1.812970,6] input: synaptics_dsx_i2c as /devices/soc/78b7000.i2c/i2c-3/3-0020/input/input2
[    1.813047,6] synaptics_rmi4_query_device: Product: s3203b, firmware id: 25d862, config id: 16112102
[    1.813797,6] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
[    1.813803,6] synaptics_dsx_sysfs_touchscreen: assigned minor 32
[    1.813878,6] synaptics_dsx_i2c 3-0020: Failed to register fps_notifier: -19
[    1.814729,6] fpc1020 spi8.0: Unable to read wakelock time
[    1.814817,6] input: fpc1020 as /devices/virtual/input/input3
[    1.814888,6] fpc1020 spi8.0: fpc1020_probe: ok
[    1.815024,6] input: SX9310 Cap Touch as /devices/virtual/input/input4
[    1.815325,6] SX9310registered with threaded irq (53)
[    1.815441,6] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok)
[    1.815662,0] irq 6, desc: ffffffc0adacd200, depth: 0, count: 0, unhandled: 0
[    1.815666,0] ->handle_irq():  ffffffc0003458d8, ->irq_data.chip(): ffffffc001479d70, ->action():           (null)
[    1.815671,0]    IRQ_NOPROBE set
[    1.815674,0]  IRQ_NOREQUEST set
[    1.815676,0]   IRQ_NOTHREAD set
[    2.222665,0] alsps_epl8802set_psensor_intr_threshold: low_thd = 29599, high_thd = 29999
[    2.223445,0] input: light1 as /devices/virtual/input/input5
[    2.223573,0] input: Rear proximity sensor1 as /devices/virtual/input/input6
[    2.233952,0] i2c-msm-v2 7af6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x10 (ok)
[    2.236060,0] alsps_epl8802set_psensor_intr_threshold: low_thd = 29599, high_thd = 29999
[    2.236896,0] input: light2 as /devices/virtual/input/input7
[    2.237027,0] input: Rear proximity sensor2 as /devices/virtual/input/input8
[    2.247237,0] i2c-core: driver [EPL8802] using legacy suspend method
[    2.247241,0] i2c-core: driver [EPL8802] using legacy resume method
[    2.247622,0] input: qwerty as /devices/virtual/input/input9
[    2.247863,0] hb_init hb done
[    2.247895,0] i2c-core: driver [smi130_acc] using legacy suspend method
[    2.247898,0] i2c-core: driver [smi130_acc] using legacy resume method
[    2.247917,0] i2c-core: driver [smi130_gyro] using legacy suspend method
[    2.247920,0] i2c-core: driver [smi130_gyro] using legacy resume method
[    2.248191,0] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
[    2.248282,0] i2c /dev entries driver
[    2.254814,0] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
[    2.256484,0] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
[    2.257148,0] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
[    2.257706,0] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
[    2.259528,0] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
[    2.260573,0] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
[    2.261581,0] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
[    2.262392,0] msm_actuator_platform_probe:2086 No valid actuator GPIOs data
[    2.263081,0] msm_eeprom_platform_probe failed 2192
[    2.263455,4] msm_eeprom_platform_probe failed 2192
[    2.264250,4] msm_flash_get_pmic_source_info:1000 alternate current: read failed
[    2.264263,4] msm_flash_get_pmic_source_info:1020 alternate max-current: read failed
[    2.264275,4] msm_flash_get_pmic_source_info:1040 alternate duration: read failed
[    2.264311,4] msm_flash_get_pmic_source_info:1000 alternate current: read failed
[    2.264322,4] msm_flash_get_pmic_source_info:1020 alternate max-current: read failed
[    2.264334,4] msm_flash_get_pmic_source_info:1040 alternate duration: read failed
[    2.264370,4] msm_flash_get_pmic_source_info:1110 alternate current: read failed
[    2.264381,4] msm_flash_get_pmic_source_info:1130 alternate current: read failed
[    2.264417,4] msm_flash_get_pmic_source_info:1110 alternate current: read failed
[    2.264428,4] msm_flash_get_pmic_source_info:1130 alternate current: read failed
[    2.264440,4] msm_flash_get_dt_data:1203 No valid flash GPIOs data
[    2.264444,4] msm_camera_get_dt_vreg_data:1201 number of entries is 0 or not present in dts
[    2.265023,4] adp1660 i2c_add_driver success
[    2.265817,4] msm_camera_get_dt_gpio_set_tbl failed 794
[    2.266150,4] msm_camera_get_dt_gpio_set_tbl failed 794
[    2.266182,4] msm_sensor_driver_parse force sw strobe, id 1
[    2.266476,4] msm_camera_get_dt_gpio_set_tbl failed 794
[    2.266788,4] msm_camera_get_dt_gpio_set_tbl failed 794
[    2.270461,4] MSM-CPP cpp_init_hardware:1011 CPP HW Version: 0x40030003
[    2.270468,4] MSM-CPP cpp_init_hardware:1029 stream_cnt:0
[    2.271541,5] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
[    2.271553,5] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
[    2.272554,5] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
[    2.272566,5] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
[    2.279057,5] __msm_jpeg_init:1537] Jpeg Device id 0
[    2.280489,5] usbcore: registered new interface driver uvcvideo
[    2.280496,5] USB Video Class driver (1.1.1)
[    2.280985,5] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=66
[    2.281778,5] FG: fg_power_get_property: ESR Bad: -22 mOhm
[    2.281996,5] FG: fg_power_get_property: ESR Bad: -22 mOhm
[    2.282036,5] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
[    2.283505,4] unable to find DT imem DLOAD mode node
[    2.283960,4] unable to find DT imem EDLOAD mode node
[    2.284993,6] thermal thermal_zone1: failed to read out thermal zone 1
[    2.285117,6] thermal thermal_zone2: failed to read out thermal zone 2
[    2.285238,6] thermal thermal_zone3: failed to read out thermal zone 3
[    2.285359,6] thermal thermal_zone4: failed to read out thermal zone 4
[    2.285735,6] qpnp_vadc_read: no vadc_chg_vote found
[    2.285747,6] qpnp_vadc_get_temp: VADC read error with -22
[    2.285757,6] thermal thermal_zone5: failed to read out thermal zone 5
[    2.306375,6] device-mapper: uevent: version 1.0.3
[    2.306588,6] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    2.306650,6] device-mapper: req-crypt: dm-req-crypt successfully initalized.
[    2.306650,6] 
[    2.307320,6] sdhci: Secure Digital Host Controller Interface driver
[    2.307324,6] sdhci: Copyright(c) Pierre Ossman
[    2.307327,6] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.309356,1] qcom_ice_get_pdevice: found ice device ffffffc003a21200
[    2.309360,1] qcom_ice_get_pdevice: matching platform device ffffffc0ad0ab000
[    2.313063,1] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001be0000
[    2.313460,1] sdhci_msm 7824900.sdhci: No vmmc regulator found
[    2.313465,1] sdhci_msm 7824900.sdhci: No vqmmc regulator found
[    2.313744,1] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
[    2.347073,1] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    2.361299,1] sdhci_msm 7864900.sdhci: No vmmc regulator found
[    2.361305,1] sdhci_msm 7864900.sdhci: No vqmmc regulator found
[    2.361581,1] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
[    2.382751,0] mmc0: Out-of-interrupt timeout is 50[ms]
[    2.382754,0] mmc0: BKOPS_EN equals 0x2
[    2.382758,0] mmc0: eMMC FW version: 0x07
[    2.382761,0] mmc0: CMDQ supported: depth: 16
[    2.382764,0] mmc0: cache barrier support 0 flush policy 0
[    2.392231,0] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
[    2.392402,0] mmc0: CMDQ enabled on card
[    2.392409,0] mmc0: new HS400 MMC card at address 0001
[    2.392644,0] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2
[    2.392650,0] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2
[    2.392738,0] mmcblk0: mmc0:0001 RX1BMB 29.1 GiB 
[    2.392810,0] mmcblk0rpmb: mmc0:0001 RX1BMB partition 3 4.00 MiB
[    2.393585,2] qcom,leds-atc leds-atc-20: atc_leds_probe success
[    2.393670,2] hidraw: raw HID events driver (C) Jiri Kosina
[    2.393911,1] tz_log 8600720.tz-log: Hyp log service is not supported
[    2.393965,2] usbcore: registered new interface driver usbhid
[    2.393985,2] usbhid: USB HID core driver
[    2.394574,0]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54
[    2.394847,5] ashmem: initialized
[    2.395109,5] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
[    2.397232,5] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    2.398812,5] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    2.398919,5] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
[    2.402536,0] sensors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_parse: get qdsp timer cntpct hi offset fail
[    2.402554,0] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
[    2.402937,0] usbcore: registered new interface driver snd-usb-audio
[    2.412257,0] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
[    2.415475,4] u32 classifier
[    2.415479,4]     Actions configured
[    2.415553,4] TCP: cubic registered
[    2.415556,4] Initializing XFRM netlink socket
[    2.415777,4] NET: Registered protocol family 10
[    2.416393,5] mip6: Mobile IPv6
[    2.416398,5] sit: IPv6 over IPv4 tunneling driver
[    2.416650,5] NET: Registered protocol family 17
[    2.416664,5] NET: Registered protocol family 15
[    2.416712,5] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.416733,5] l2tp_core: L2TP core driver, V2.0
[    2.416742,5] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.416745,5] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    2.416755,5] l2tp_netlink: L2TP netlink interface
[    2.416773,5] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    2.416803,5] l2tp_debugfs: L2TP debugfs support
[    2.416806,5] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    2.417143,5] NET: Registered protocol family 27
[    2.420763,5] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
[    2.422270,5] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
[    2.423588,5] msm-dwc3 7000000.ssusb: unable to read dcp-max-current, using define value
[    2.424754,5] sps:BAM 0x0000000007104000 is registered.
[    2.427621,5] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
[    2.427743,5] qpnp-smbcharger qpnp-smbcharger-17: length=8
[    2.427753,5] qpnp-smbcharger qpnp-smbcharger-17: num parallel charge entries=8
[    2.427825,5] smbcharger_charger_otg: no parameters
[    2.428459,5] FG: fg_vbat_est_check: vbat(-22),est-vbat(-22),diff(0),threshold(300000)
[    2.451866,5] qpnp-smbcharger qpnp-smbcharger-17: HW Detected SDP!
[    2.452235,5] FG: fg_vbat_est_check: vbat(-22),est-vbat(-22),diff(0),threshold(300000)
[    2.454912,6] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
[    2.456231,2] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
[    2.457717,5] qpnp-smbcharger qpnp-smbcharger-17: Battery Temp State: Unknown -> Cool at -2C
[    2.457731,5] qpnp-smbcharger qpnp-smbcharger-17: Ext High = High
[    2.457830,0] EDAC DEVICE0: Giving out device to module soc:arm64-cpu-erp controller cache: DEV soc:arm64-cpu-erp (INTERRUPT)
[    2.458332,0] ARM64 CPU ERP: Could not find <cci-irq> IRQ property. Proceeding anyway.
[    2.458345,0] ARM64 CPU ERP: SBE detection is disabled.
[    2.461807,0] Registered cp15_barrier emulation handler
[    2.461827,0] Registered setend emulation handler
[    2.462848,0] registered taskstats version 1
[    2.463116,2] Unable to find log_buf by kallsyms!
[    2.464659,0] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
[    2.466172,0] drv260x: drv260x_init success
[    2.466906,0] utags (utags_probe): Done [config]
[    2.466930,0] utags (utags_dt_init): backup storage path not provided
[    2.467106,0] utags (utags_probe): Done [hw]
[    2.468083,0] RNDIS_IPA module is loaded.
[    2.468575,0] file system registered
[    2.468607,0] mbim_init: initialize 1 instances
[    2.468698,0] mbim_init: Initialized 1 ports
[    2.469655,0] rndis_qc_init: initialize rndis QC instance
[    2.469790,0] Number of LUNs=8
[    2.469796,0] Mass Storage Function, version: 2009/09/11
[    2.469800,0] LUN: removable file: (no medium)
[    2.469809,0] Number of LUNs=1
[    2.469838,0] LUN: removable file: (no medium)
[    2.469841,0] Number of LUNs=1
[    2.470385,0] android_usb gadget: android_usb ready
[    2.471742,0] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input10
[    2.471756,0] input input10: gpio-keys report volume_up [0x73] type 0x1 state Off
[    2.472185,0] i2c-core: driver [stmvl53l0] using legacy resume method
[    2.472940,0] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-29 10:09:46 UTC (2455786)
[    2.476155,5] msm-core initialized without polling period
[    2.478963,5] parse_cpu_levels: idx 1 276
[    2.478983,5] calculate_residency: residency < 0 for LPM
[    2.479075,5] parse_cpu_levels: idx 1 286
[    2.479084,5] calculate_residency: residency < 0 for LPM
[    2.481637,5] qcom,qpnp-flash-led qpnp-flash-led-23: Unable to acquire pinctrl
[    2.483097,5] rmnet_ipa started initialization
[    2.483102,5] IPA SSR support = True
[    2.483105,5] IPA ipa-loaduC = True
[    2.483108,5] IPA SG support = True
[    2.485835,5] ipa ipa_sps_irq_control_all:945 EP (5) not allocated.
[    2.485852,5] ipa ipa2_uc_state_check:301 uC is not loaded
[    2.487015,5] rmnet_ipa completed initialization
[    2.489145,5] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
[    2.490964,5] msm8952-asoc-wcd c051000.sound: default codec configured
[    2.494013,5] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
[    2.494064,5] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[    2.494542,5] apc_mem_acc_corner: disabling
[    2.494548,5] gfx_mem_acc_corner: disabling
[    2.494616,5] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[    2.494643,5] clock_late_init: Removing enables held for handed-off clocks
[    2.498739,5] ALSA device list:
[    2.498743,5]   No soundcards found.
[    2.499070,5] Freeing unused kernel memory: 480K
[    2.499111,5] Freeing alternatives memory: 116K
[    2.499114,5] This architecture does not have kernel memory protection.
[    2.573421,5] bcl_peripheral:bcl_poll_vbat_high Vbat reached high clear trip. vbat:4380480
[    2.573448,5] bcl_peripheral:bcl_poll_ibat_low Invalid ibat state 1
[    2.826474,2] synaptics_dsx_i2c 3-0020: RxTx mapped from F$55
[    2.826474,2] 
[    2.826474,2] 	Rx mapped count 23(23)
[    2.826474,2] 	Tx 				mapped count 13(14)
[    2.826474,2] 
[    2.827080,2] synaptics_rmi4_detection_work: F54_Ctrl scan failed
[    2.827094,2] synaptics_rmi4_detection_work: F54_Data scan failed
[    2.831897,2] synaptics_dsx_i2c 3-0020: fwu_read_f34_queries: BL version = 5
[    2.832703,2] synaptics_rmi4_detection_work: using F34 status retrieval function
[    4.957768,5] qpnp-smbcharger qpnp-smbcharger-17: Battery Temp State: Cool -> Good at 33C
[    4.957790,5] qpnp-smbcharger qpnp-smbcharger-17: Ext High = Low
[    5.065588,4] FG: fg_vbat_est_check: vbat(4313024),est-vbat(4308751),diff(4273),threshold(300000)
[    5.800150,5] FG: fg_get_mmi_battid: Battsn unused
[    5.800163,5] qcom,qpnp-fg qpnp-fg-18: Default Serial Number SNN5982
[    5.800170,5] qcom,qpnp-fg qpnp-fg-18: Battery Match Found using default qcom,hg40-atl
[    5.804452,5] FG: fg_batt_profile_init: Battery profiles same, using default
[    5.807262,5] FG: populate_system_data: cutoff_voltage = 3199901, nom_cap_uah = 3038000 p1p2 = 33, p2p3 = 6
[    5.807297,5] FG: fg_batt_profile_init: Battery SOC: 100, V: 4313024uV
[    5.807841,5] FG: fg_vbat_est_check: vbat(4313024),est-vbat(4308751),diff(4273),threshold(300000)
[    7.466831,5] qpnp-smbcharger qpnp-smbcharger-17: Start APSD Rerun!
[    7.467101,2] android_work: android_work: did not send uevent (0 0 0000000000000000)
[    7.475371,2] msm-dwc3 7000000.ssusb: DWC3 in low power mode
[    7.720595,7] FG: fg_vbat_est_check: vbat(4313024),est-vbat(4308751),diff(4273),threshold(300000)
[    8.586061,0] msm-dwc3 7000000.ssusb: DWC3 exited from low power mode
[    8.680598,7] FG: fg_vbat_est_check: vbat(4289220),est-vbat(4290746),diff(1526),threshold(300000)
[   13.600236,0] msm-dwc3 7000000.ssusb: Fall back to min charging limit
[   13.600251,0] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
[   20.091277,0] FG: update_esr_value: ESR: update esr from 0x58cd4a6761c34a67 to 0x4120391f391f3019
[   20.553597,1] random: nonblocking pool is initialized
[   25.608435,4] enable_store: android_usb: already disabled
[   25.819257,5] read descriptors
[   25.819270,5] read strings
[   26.026331,0] msm-dwc3 7000000.ssusb: Avail curr from USB = 0
[   26.140355,0] android_work: android_work: sent uevent USB_STATE=CONNECTED
[   26.143922,0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
[   26.267167,0] android_work: android_work: sent uevent USB_STATE=CONNECTED
[   26.271064,0] android_usb gadget: high-speed config #1: 86000c8.android_usb
[   26.271112,0] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
[   26.323381,0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
[   27.884085,1] synaptics_dsx_sensor_state: state change STANDBY -> ACTIVE
[   29.251091,5] mdss_dsi_on[0]+.
[   29.352977,6] EXT4-fs (mmcblk0p53): recovery complete
[   29.352994,6] EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts: (null)
[   32.347726,2] synaptics_dsx_sensor_state: state change ACTIVE -> SUSPEND
[   32.347734,2] synaptics_rmi4_suspend: screen: 
[   32.348014,2] mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x10 unset=0x0
[   32.380197,2] mdss_dsi_panel_off[0]+.
[   32.536218,2] mdss_dsi_off[0]+.
[   33.168843,5] is_mdp_prefetch_needed: low vbp+vfp may lead to perf issues in some cases
[   33.170061,5] mdss_dsi_on[0]+.
[   33.237445,0] mdss_dsi_panel_on[0]+.
[   33.398083,0] mdss_dsi_panel_on[0]-. Pwr_mode(0x0A) = 0x9c
[  171.583085,7] FG: fg_vbat_est_check: vbat(4401219),est-vbat(4407017),diff(5798),threshold(300000)
[  247.502100,1] synaptics_dsx_sensor_state: state change SUSPEND -> ACTIVE