SSR and Arduino Mega with ESP8266

gistfile1.cpp

//mod from https://github.com/Doomhammer458/ESP8266-LED-Server/blob/master/esp8266LED.ino
//#include <SoftwareSerial.h>
//use mega Serial 2 for serial monitor; Serial 1 on pins 19 (RX) and 18 (TX);// Serial2 on pins 17 (RX) and 16 (TX), Serial3 on pins 15 (RX) and 14 (TX).
#define SSID "the_ssid_here"
#define PASS "the_password_here"
#define DST_IP "220.181.111.85" //baidu.com
//SoftwareSerial dbgSerial(10, 11); // RX, TX
#define acPin 7
char myChar;

void setup()
{
  // Open serial communications and wait for port to open:
  //serial 2 is to esp8266 
  Serial2.begin(9600);//9600 (mine), 57600, 115200
  Serial2.setTimeout(1000);

  //serial 0 is to usb
  Serial.begin(115200);
  //mod1 otherwise module cant be ready
  while(!Serial); 
  while(!Serial2);

  Serial.println("ESP8266 control AC Demo on Mega2560");

  //mod1 otherwise module cant be ready
  while(Serial2.available()>0)
    Serial2.read();

  delay(1000);
  //test if the module is ready
  Serial2.println("AT+RST");
  delay(1000);
  //delay(1000);

  Serial.println("Resetting module");
  //mod1
  //Serial2.flush();


  if(Serial2.find("ready"))
    //if(Serial2.find("Ready")||Serial2.find("ready"))
  {
    //dbgSerial.println("Module is ready");
    Serial.println("Module is ready");
  }
  else
  {
    //dbgSerial.println("Module have no response.");
    Serial.println("Module have no response.");
    while(1);//hang here
  }
  delay(1000);
  //connect to the wifi
  boolean connected=false;
  for(int i=0;i<5;i++)
  {
    if(connectWiFi())
    {
      Serial.println(" WiFi connected");
      connected = true;
      break;
    }
  }
  if (!connected){
    Serial.println("No WiFi connected");
    while(1);
  }
  delay(5000);
  //print the ip addr
  Serial2.println("AT+CIFSR");
  Serial.println("IP address:");
  while (Serial2.available())
    Serial.write(Serial2.read());

  //set the single connection mode
  //Serial2.println("AT+CIPMUX=0");//default single conn
  Serial2.println("AT+CIPMUX=1");//led server multi conn
  delay(1000);

  Serial2.println("AT+CIPSERVER=1,8266");
  delay(1000);
  Serial.println("Starting TCP Server");
}
void loop()
{
  /*
   //esp8266 as browser to open baidu.com
   String cmd = "AT+CIPSTART=\"TCP\",\"";
   cmd += DST_IP;
   cmd += "\",80";
   		
   Serial2.println(cmd);
   //dbgSerial.println(cmd);
   Serial.println(cmd);
   if(Serial2.find("Error")) return;
   cmd = "GET / HTTP/1.0\r\n\r\n";
   Serial2.print("AT+CIPSEND=");
   Serial2.println(cmd.length());
   if(Serial2.find(">"))
   {
   //dbgSerial.print(">");
   Serial.print(">");
   }else
   {
   Serial2.println("AT+CIPCLOSE");
   //dbgSerial.println("connect timeout");
   Serial.println("connect timeout");
   delay(1000);
   return;
   }
   Serial2.print(cmd);
   delay(2000);
   //Serial.find("+IPD");
   while (Serial2.available())
   {
   char c = Serial2.read();
   //dbgSerial.write(c);
   Serial.write(c);
   //if(c=='\r') dbgSerial.print('\n');
   if(c=='\r') Serial.print('\n');
   }
   //dbgSerial.println("====");
   Serial.println("====");
   delay(1000);
   */

  //waiting for cmd "LED"
  if (Serial2.available()>0){
    if(Serial2.find("LED")){
      setLED();
    }
  }
}
boolean connectWiFi()
{
  Serial2.println("AT+CWMODE=1");
  String cmd="AT+CWJAP=\"";
  cmd+=SSID;
  cmd+="\",\"";
  cmd+=PASS;
  cmd+="\"";
  //dbgSerial.println(cmd);
  Serial2.println(cmd);
  Serial.println(cmd);
  delay(2000);
  if(Serial2.find("OK"))
  {
    //dbgSerial.println("OK, Connected to WiFi.");
    Serial.println("OK, Connected to WiFi.");
    return true;
  }
  else
  {
    //dbgSerial.println("Can not connect to the WiFi.");
    Serial.println("Can not connect to the WiFi.");
    return false;
  }
}


void setLED(){

  int red = Serial.parseInt();
  int green = Serial.parseInt();
  int blue = Serial.parseInt();
  Serial.print("LED set. Red: ");
  Serial.print(red);
  Serial.print(" Green ");
  Serial.print(green);
  Serial.print(" Blue ");
  Serial.println(blue);
  //colorWipe(strip.Color(red,green,blue),200);

  //simple test AC on/off for 2sec upon receive the command "LED"
  Serial.println("Set AC on/off");
  digitalWrite(acPin,HIGH);
  delay(2000);
  digitalWrite(acPin,LOW);

}