teos0009

import urllib
import re

import time 

 
data = urllib.urlopen('http://bitly.measuredvoice.com/bitly_archive/?C=M;O=D').read()    
#print data

#datafiles name pattern - usagov_bitly_data2011-07-29-1311919454

teos0009

/*
fht_adc.pde
guest openmusiclabs.com 9.5.12
example sketch for testing the fht library.
it takes in data on ADC0 (Analog0) and processes them
with the fht. the data is sent out over the serial
port at 115.2kb.  there is a pure data patch for
visualizing the data.
*/
//shin: mod with mapping of rgb to frequency

teos0009

/*
fixFFT http://forum.arduino.cc/index.php/topic,38153.0.html
 this should give an fft with 
 sampling rate:           1ms
 frequency resolution:  500Hz
 lowest frequency:       7.8Hz
 */

//shin: fft with attiny85, rgb led blend with frequency

teos0009

        public void getURL()
        {
            
            URL u = null;

            InputStream is = null;
            DataInputStream dis;
            String s;
            
            try {

teos0009

//**************************************************************************
//*                 Self-balancing Chopper project                         *
//*                                                                        *
//*                      FOR Arduino MEGA1280    8.11.14                   *
//*          Pin 20 is SDA and 21 is SCL on a Mega 1280                    *
//*                                                                        *
//*                            John Dingley                                *
//*          Clearly the part of this code that reads the digital IMU      *
//*                 is based on the Varaseno FreeSix IMU library           *
//*                                                                        *

teos0009

   //#include <SoftwareSerial.h>
   //use mega Serial 2 for serial monitor; Serial 1 on pins 19 (RX) and 18 (TX);// Serial2 on pins 17 (RX) and 16 (TX), Serial3 on pins 15 (RX) and 14 (TX).
   #define SSID "enter SSID here"
   #define PASS "enter password here"
   #define DST_IP "220.181.111.85" //baidu.com
   //SoftwareSerial dbgSerial(10, 11); // RX, TX
   void setup()
   {
     // Open serial communications and wait for port to open:
     //serial 2 is to esp8266 

teos0009

   #include <SoftwareSerial.h>
   #define SSID "enter the SSID"
   #define PASS "enter the password"
   #define DST_IP "220.181.111.85" //baidu.com
   SoftwareSerial dbgSerial(10, 11); // RX, TX
   void setup()
   {
     //setup RGB LED as indicator instead of softserial
     pinMode(3, OUTPUT);
     pinMode(4, OUTPUT);

teos0009

//mod from https://github.com/Doomhammer458/ESP8266-LED-Server/blob/master/esp8266LED.ino
//#include <SoftwareSerial.h>
//use mega Serial 2 for serial monitor; Serial 1 on pins 19 (RX) and 18 (TX);// Serial2 on pins 17 (RX) and 16 (TX), Serial3 on pins 15 (RX) and 14 (TX).
#define SSID "the_ssid_here"
#define PASS "the_password_here"
#define DST_IP "220.181.111.85" //baidu.com
//SoftwareSerial dbgSerial(10, 11); // RX, TX
#define acPin 7
char myChar;

teos0009

//
//#include <SoftwareSerial.h>
//use mega Serial 2 for serial monitor; Serial 1 on pins 19 (RX) and 18 (TX);// Serial2 on pins 17 (RX) and 16 (TX), Serial3 on pins 15 (RX) and 14 (TX).
//DS18B20 uses onewire protocol; need 5k pullup
#include <OneWire.h>
#include <DallasTemperature.h>

#define SSID "SSID_HERE"
#define PASS "PASSWORD_HERE"
#define DST_IP "220.181.111.85" //baidu.com

teos0009

#have to physically connected to the respective AP to use
#T931 cloud thingSpeak1: 172.16.114.166 
#http://172.16.114.166:3000
#T1662 thingspeak server: 192.168.1.117:3000

//---error with apt-get----
#remove deb with Failed cond via comment #
sudo nano /etc/apt/sources.list

/----list sw to a file--