Skip to content

Instantly share code, notes, and snippets.

@tfg13
Created November 24, 2013 15:50
Show Gist options
  • Save tfg13/7628614 to your computer and use it in GitHub Desktop.
Save tfg13/7628614 to your computer and use it in GitHub Desktop.
script to set synaptics configuration for Thinkpad T440p
#!/bin/sh
# this script sets some parameters to get a useable configuration
# these changes are not persistent, you may want to include this in your autostart
# 1 finger = left click, 2 finger = right click, 3 finger = middle click
synclient TapButton2=3
synclient TapButton3=2
synclient ClickFinger2=3
synclient ClickFinger3=2
# enable horizontal two-finger scrolling (vertical is enabled by default)
synclient HorizTwoFingerScroll=1
# disable the top edge of the touchpad to prevent jittering when using the trackpoint
synclient AreaTopEdge=2500
# configure trackpoint buttons
synclient RightButtonAreaLeft=3700
synclient RightButtonAreaRight=0
synclient RightButtonAreaTop=0
synclient RightButtonAreaBottom=2300
synclient MiddleButtonAreaLeft=2900
synclient MiddleButtonAreaRight=3500
synclient MiddleButtonAreaTop=0
synclient MiddleButtonAreaBottom=2300
@bbraybrook
Copy link

thanks for this tfg13.

if you just use the script and get an "integer parameter out of range" error, you may need to move the MiddleButtonAreaRight directive about the MiddleButtonAreaLeft directive.

If you want to disable the touchpad for cursor movement (if you only use the nub mouse), but keep the click buttons and right edge scrolling, add:
synclient AreaLeftEdge=4826 (or whatever the value of RightEdge is as shown by synclient -l)

@csarven
Copy link

csarven commented Feb 20, 2015

I've been using

      Option "MiddleButtonAreaLeft"   "2900"
      Option "MiddleButtonAreaRight"  "3500"

over a year now. However, I've just experienced the out or range error for some reason, as mentioned by @bbraybrook . I can confirm that if I change the swap those two lines, the error goes away.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment