thaJeztah/docker_swarm_with_macvlan_consul_and_autoscaling.md

## docker_swarm_with_macvlan_consul_and_autoscaling.md

      
    Raw
  

              docker_swarm_with_macvlan_consul_and_autoscaling.md
            
          
    Docker Swarm with Macvlan, Consul and Autoscaling

TL;DR:

This will get you routable containers with IPs on your existing subnets, advertising to Consul. They will also be scalable and placed across a cluster of Swarm hosts. It's assumed that you are already running Consul, so if not, there are a ton of tutorials out there. It's also assumed you know how to install Docker and various Linux kernels.
Bonus: We add an autoscaling API called Orbiter (https://gianarb.it/blog/orbiter-the-swarm-autoscaler-moves).
I just want to run containers, like now, on my existing infrastructure and networks!

So you have an existing environment. You use Consul for service discovery. Life is good. Containers are now a thing and you want to work them in without having to worry about overlay networking or reverse proxies. You also don't want to add extra latency (as some naysayers could use it as fuel to kill your hopes and dreams). Lastly, you don't have a lot of time to invest in a complex orchestration tool, such as Kuberenetes. With Macvlan support added to Docker 17.06, we can rock 'n roll and get shit done.
I'd consider this as a bridge the gap solution that may not be long lived. You may end up with k8s in the end, using overlay networking, enjoying the modularity it brings. This solution brings the least risk, easiest implementation and highest performance when you need it. You need to prove that the most basic Docker experience wont degrade the performance of your apps. If you were to jump straight to overlays, reverse proxies, etc, you are taking on a lot of extra baggage without having even traveled anywhere.
Lastly, Kelsey Hightower thinks (or thought) running without all the fluff was cool, last year. https://twitter.com/kelseyhightower/status/716987913917964288
Networking (Macvlan)

You may already have a bunch of VLANs and subnets. Perhaps you want containers to ride on your existing VLANs and subnets. Macvlan (and Ipvlan) allow you to slap a MAC and an IP (Macvlan) or just an IP (ipvlan) on a container. You also don't want to introduce any more complexity and overhead into packets getting to your containers (such as overlay networking and reverse proxies).
Service Discovery (Consul)

In my case, I'm using Consul. It's ubiquitous. Sure, Kubernetes and Swarm both provide internal service discovery mechanisms, but what about integrating that with your existing apps? What if you have an app you want to eventually containerize, but it may run on bare metal or ec2, advertising to Consul. How does everything "outside" talk to services that only exist "inside"?
Orchestration (Swarm)

Swarm can be setup in minutes. You mark a node (preferably more than one to maintain quorum) as a manager and it will provide you a tokened url you can paste onto future worker nodes. Kubernetes, being more modular and feature packed, suffers as it's installation is a major pain. It also comes bundled with a bunch of features that are completely unnecessary for a minimalist orchestration layer.
The idea

Trunk existing VLANs to your Dockerhosts


You dont have to, but I would recommend dedicating at least one VLAN/Subnet for containers to ride on
You also don't have to use trunking

Create tagged interfaces for each VLAN that you've trunked.

If you just want to ride on a single ip'd interface on your host, that's cool too.

As far as trunked VLANs that you've created tagged interfaces for, you can leave them un-ip'd.

[root@xxx network-scripts]# ip a|grep bond0.40
8: bond0.40@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000

Enable Promiscuous mode for each interface (this is a requirement for Docker to be able to use them for Macvlan)

ip link set dev bond0.40 promisc on


If the parent interface is IP'd and you want to reach it from your containers on the same subnet, you also need to create a macnet interface and add a route to that subnet on your Docker host.


in the case of an ip'd interface on your dockerhost on vlan252:


#ip link add macnet252 link bond0.252 type macvlan mode bridge
#ifconfig macnet252 up
#ip route add 10.90.255.0/24 dev macnet252

Install Docker 17.06 (docker-ce)


I recommend running a recent kernel, ie: 4.11.x

Split your subnet into a few chunks, so you can assign those chunks to each Docker host


Why in hell do we have to chunk it out? Why can't we specify a global range and leave the IPAM up to Docker? I'm not sure. I mentioned it to the head of Docker networking and the answer I received was a little confusing. I will most likely bring it up again (if the solution below dosnt work).
CIDRs are used to define ranges, not separate, routable subnets (thank docker)
There is an experimental DHCP driver (https://gist.github.com/nerdalert/3d2b891d41e0fa8d688c) that will allow you to set a global Macvlan scope, but I havent had a chance to try it.
If you have 5 Docker hosts, split out your ranges in whatever chunks you feel appropriate. If you think you'll only ever run 5 containers on each host, maybe a /29 is fine for you, for that subnet.

My network is 172.80.0.0/16. I'm going to give each host a /24. I have preexisting hosts already on part of the first /24 of that network, so im going to start at 1.0 and move on. I dont need a network or broadcast address because the ranges fall inside the larger /16 supernet. The network name (in this case vlan40_net is arbitrary).
manager1# docker network create --config-only --subnet 172.80.0.0/16 --gateway 172.80.0.1 -o parent=bond0.40 --ip-range 10.90.1.0/24 vlan40_net

worker1# docker network create --config-only --subnet 172.80.0.0/16 --gateway 172.80.0.1 -o parent=bond0.40 --ip-range 10.90.2.0/24 vlan40_net

worker2# docker network create --config-only --subnet 172.80.0.0/16 --gateway 172.80.0.1 -o parent=bond0.40 --ip-range 10.90.3.0/24 vlan40_net

Now I'm going to create the swarm enabled network, on the manager. This network references the config-only per-node networks we just created. The network name (swarm-vlan40_net) is arbitary.
manager1# docker network create -d macvlan --scope swarm --config-from vlan40_net swarm-vlan40_net

Bask in the glory of Macvlan + Swarm
manager1# docker network ls|grep vlan40
0c1e0ab98806        vlan40_net            null                local
znxv8ab5t3n1        swarm-vlan40_net      macvlan             swarm

Bundle the Consul agent inside your container and advertise in the same fashion you're used to.


Yes, I know about Registrator. The project is stale and doesn't seem to work with Macvlan enabled Swarm. I spent hours trying to get it to work with no avail. Works fine with --network="host", but not with Macvlan/Swarm.
Don't worry: It's ok to bundle the agent inside the container along with your app, at least for now. You'll still be a hero.
Since your container will have a real ip, it will appear in Consul as a host and will be routable.
Consul needs to run last and stay running, it will get executed via an entrypoint script with exec. It needs to be run with exec so it gets the honor of running as PID 1 (so it can receive SIGTERMs when it's time has come). This allows the agent to leave the cluster gracefully. See below.

Excerpt from Dockerfile.
RUN mkdir /opt/consul
RUN mkdir /opt/consul/bin
RUN mkdir /opt/consul/data
COPY entrypoint.sh /
COPY consul /opt/consul/bin
COPY consul.json /opt/consul


Yes, this example shows a static consul.json which contains a hardcoded cluster assignment. This could easily be set to an env that gets set at runtime.

Bits from entrypoint.sh
#!/bin/sh

#add dockerhost ip to /etc/hosts
grep dockerhost /host/etc/hosts >> /etc/hosts

#drop container hostname and ip into consul config
myip=`hostname -i`
myhostname=`hostname`
sed -i "s/myip/$myip/g" /opt/consul/consul.json
sed -i "s/myhostname/$myhostname/g" /opt/consul/consul.json

#launch myapp
/current/bin/myapp myargs &

#launch consul - launched with exec b/c we want to be able to send SIGTERM when the occasion arises.
exec /opt/consul/bin/consul agent -config-dir /opt/consul/consul.json

Running a container as a service

manager1# docker service create --network swarm-vlan40_net --name portainer portainer/portainer

manager1# nkbu2j5suypr        portainer             replicated          1/1                 portainer/portainer:latest

And to see what IPs are used by your containers on a specific host:
manager1# docker network inspect swarm-vlan40_net
[
    {
        "Name": "swarm-vlan40_net",
        "Id": "znxv8ab5t3n1vdb86jtlie823",
        "Created": "2017-08-11T07:50:12.488791524-04:00",
        "Scope": "swarm",
        "Driver": "macvlan",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": null,
            "Config": [
                {
                    "Subnet": "172.80.0.0/16",
                    "IPRange": "172.80.1.0/24",
                    "Gateway": "172.80.0.1"
                }
            ]
        },
        "Internal": false,
        "Attachable": false,
        "Ingress": false,
        "ConfigFrom": {
            "Network": "vlan40_net"
        },
        "ConfigOnly": false,
        "Containers": {
            "6a74fe709c30e517ebb2931651d6356bb4fddac48f636263182058036ce73d75": {
                "Name": "portainer.1.a4dysjkpppuyyqi18war2b4u6",
                "EndpointID": "777b2d15e175e70aaf5a9325fa0b4faa96347e4ec635b2edff204d5d4233c506",
                "MacAddress": "02:42:0a:5a:23:40",
                "IPv4Address": "172.80.1.0/24",
                "IPv6Address": ""
            },
        "Options": {
            "parent": "bond0.40"
        },
        "Labels": {}
    }
]

UI

If you must have a UI, I recommend Portainer. https://github.com/portainer/portainer
Bonus time

Orbiter. https://github.com/gianarb/orbiter
Scaling based on an API call. Trigger a webhook from your favorite monitoring software...
This will let you make a call to the HTTP API with an "up" or "down" and it will automatically scale the app. You can also adjust how many containers scale at those times. It really works!
Not working?

I'm always happy to help if anyone needs a hand. I can be found on dockercommunity.slack.com @killcity.