Skip to content

Instantly share code, notes, and snippets.

View theckman's full-sized avatar

Tim Heckman theckman

  • Los Angeles, CA
View GitHub Profile
@theckman
theckman / wireguard.conf
Created April 11, 2021 07:52 — forked from nealfennimore/wireguard.conf
Wireguard VPN - Forward all traffic to server
# ------------------------------------------------
# Config files are located in /etc/wireguard/wg0
# ------------------------------------------------
# ---------- Server Config ----------
[Interface]
Address = 10.10.0.1/24 # IPV4 CIDR
Address = fd86:ea04:1111::1/64 # IPV6 CIDR
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; ip6tables -A FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Add forwarding when VPN is started
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE; ip6tables -D FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -D POSTROUTING -o eth0 -j MASQUERADE # Remove forwarding when VPN is shutdown