lab10stepper.ino

//// init
//int pin1A = 11;
//int pin2A = 10;
//int duty = 25;
//
//void setup() {
//  // put your setup code here, to run once:
//  Serial.begin(9600);
//  pinMode(pin1A, OUTPUT);
//  pinMode(pin2A, OUTPUT);
//}
//
//void loop() {
//  // put your main code here, to run repeatedly:
//  digitalWrite(pin1A, HIGH);
//  while(true) {
//    digitalWrite(pin2A, HIGH);
//    Serial.println("high");
//    delay(duty);
//    digitalWrite(pin2A, LOW);
//    Serial.println("low");
//    delay(100 - duty);
//  }
//}

// init
int blue = 11;
int yellow = 10;
int pink = 6;
int orange = 5;
int delayTime = 2;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  pinMode(blue, OUTPUT);
  pinMode(yellow, OUTPUT);
  pinMode(pink, OUTPUT);
  pinMode(orange, OUTPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  digitalWrite(orange, HIGH);
  digitalWrite(pink, LOW);
  delay(delayTime);
  digitalWrite(yellow, HIGH);
  digitalWrite(blue, LOW);
  delay(delayTime);
  digitalWrite(orange, LOW);
  digitalWrite(pink, HIGH);
  delay(delayTime);
  digitalWrite(yellow, LOW);
  digitalWrite(blue, HIGH);
  delay(delayTime);
}