Skip to content

Instantly share code, notes, and snippets.

@themodernlife
Forked from joemiller/raid_ephemeral.sh
Last active August 29, 2015 14:10
Show Gist options
  • Save themodernlife/22d64e3230ecb063676e to your computer and use it in GitHub Desktop.
Save themodernlife/22d64e3230ecb063676e to your computer and use it in GitHub Desktop.
#!/bin/bash
#
# this script will attempt to detect any ephemeral drives on an EC2 node and create a RAID-0 stripe
# mounted at /mnt. It should be run early on the first boot of the system.
#
# Beware, This script is NOT fully idempotent.
#
METADATA_URL_BASE="http://169.254.169.254/2012-01-12"
yum -y -d0 install mdadm curl
# Configure Raid - take into account xvdb or sdb
root_drive=`df -h | grep -v grep | awk 'NR==2{print $1}'`
if [ "$root_drive" == "/dev/xvda1" ]; then
echo "Detected 'xvd' drive naming scheme (root: $root_drive)"
DRIVE_SCHEME='xvd'
else
echo "Detected 'sd' drive naming scheme (root: $root_drive)"
DRIVE_SCHEME='sd'
fi
# figure out how many ephemerals we have by querying the metadata API, and then:
# - convert the drive name returned from the API to the hosts DRIVE_SCHEME, if necessary
# - verify a matching device is available in /dev/
drives=""
ephemeral_count=0
ephemerals=$(curl --silent $METADATA_URL_BASE/meta-data/block-device-mapping/ | grep ephemeral)
for e in $ephemerals; do
echo "Probing $e .."
device_name=$(curl --silent $METADATA_URL_BASE/meta-data/block-device-mapping/$e)
# might have to convert 'sdb' -> 'xvdb'
device_name=$(echo $device_name | sed "s/sd/$DRIVE_SCHEME/")
device_path="/dev/$device_name"
# test that the device actually exists since you can request more ephemeral drives than are available
# for an instance type and the meta-data API will happily tell you it exists when it really does not.
if [ -b $device_path ]; then
echo "Detected ephemeral disk: $device_path"
drives="$drives $device_path"
ephemeral_count=$((ephemeral_count + 1 ))
else
echo "Ephemeral disk $e, $device_path is not present. skipping"
fi
done
if [ "$ephemeral_count" = 0 ]; then
echo "No ephemeral disk detected. exiting"
exit 0
fi
# unmount everything we can
umount /mnt
umount /media/ephemeral0
umount /media/ephemeral1
umount /media/ephemeral2
umount /media/ephemeral3
# overwrite first few blocks in case there is a filesystem, otherwise mdadm will prompt for input
for drive in $drives; do
dd if=/dev/zero of=$drive bs=4096 count=1024
done
# partprobe
mdadm --create --verbose /dev/md0 --level=0 -c256 --force --raid-devices=$ephemeral_count $drives
echo DEVICE $drives | tee /etc/mdadm.conf
mdadm --detail --scan | tee -a /etc/mdadm.conf
blockdev --setra 65536 /dev/md0
mkfs -t ext3 /dev/md0
mount -t ext3 -o noatime /dev/md0 /mnt
# Remove xvdb/sdb from fstab
# FIXME - this is not working!
chmod 777 /etc/fstab
sed -i "/${DRIVE_SCHEME}b/d" /etc/fstab
# Make raid appear on reboot
echo "/dev/md0 /mnt ext3 noatime 0 0" | tee -a /etc/fstab
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment