Serial Output

gistfile1.txt

root@ubuntu:~# minicom -D /dev/ttyUSB3 -8 -b 115200

Welcome to minicom 2.7.1

OPTIONS: I18n
Compiled on Aug 13 2017, 15:25:34.
Port /dev/ttyUSB3, 14:00:18

Press CTRL-A Z for help on special keys


[0000.219] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW .
[0000.227] I> MB1 (prd-version: 1.5.1.2-t194-41334769-9ec1833d)
[0000.233] I> Boot-mode: Coldboot
[0000.236] I> Chip revision : A02
[0000.239] I> Bootrom patch version : 15 (correctly patched)
[0000.244] I> ATE fuse revision : 0x200
[0000.247] I> Ram repair fuse : 0x0
[0000.250] I> Ram Code : 0x2
[0000.253] I> rst_source : 0x0
[0000.256] I> rst_level : 0x0
[0000.259] I> Boot-device: eMMC
[0000.274] I> sdmmc DDR50 mode
[0000.278] W> No valid slot number is found in scratch register
[0000.284] W> Return default slot: _a
[0000.287] I> Active Boot chain : 0
[0000.290] I> Boot-device: eMMC
[0000.294] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0000.301] I> Temperature = 42000
[0000.304] W> Skipping boost for clk: BPMP_CPU_NIC
[0000.309] W> Skipping boost for clk: BPMP_APB
[0000.313] W> Skipping boost for clk: AXI_CBB
[0000.317] W> Skipping boost for clk: AON_CPU_NIC
[0000.321] W> Skipping boost for clk: CAN1
[0000.325] W> Skipping boost for clk: CAN2
[0000.329] I> Boot-device: eMMC
[0000.332] I> Boot-device: eMMC
[0000.341] I> Sdmmc: HS400 mode enabled
[0000.346] I> ECC region[0]: Start:0x0, End:0x0
[0000.350] I> ECC region[1]: Start:0x0, End:0x0
[0000.354] I> ECC region[2]: Start:0x0, End:0x0
[0000.358] I> ECC region[3]: Start:0x0, End:0x0
[0000.362] I> ECC region[4]: Start:0x0, End:0x0
[0000.366] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0000.372] I> Non-ECC region[1]: Start:0x0, End:0x0
[0000.377] I> Non-ECC region[2]: Start:0x0, End:0x0
[0000.381] I> Non-ECC region[3]: Start:0x0, End:0x0
[0000.386] I> Non-ECC region[4]: Start:0x0, End:0x0
[0000.391] E> FAILED: Thermal config
[0000.398] E> FAILED: MEMIO rail config
[0000.417] I> Boot-device: eMMC
[0000.426] I> sdmmc bdev is already initialized
[0000.493] I> MB1 done

main enter
SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21
HW Function test
Start Scheduler.
in late init

  [0000.501] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-fc4604fb)
[0000.502] I> DMA Heap @ [0x526fa000 - 0x52ffa000]
[0000.503] I> Default Heap @ [0xd486400 - 0xd48a400]
[0000.503] E> DEVICE_PROD: Invalid value data = 70020000, size = 0.
[0000.509] W> device prod register failed
[0000.513] I> Boot-device: eMMC
[0000.516] I> Boot_device: SDMMC_BOOT instance: 3
[0000.522] I> sdmmc-3 params source = boot args
[0000.525] I> sdmmc bdev is already initialized
[0000.529] I> sdmmc-3 params source = boot args
[0000.535] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0000.542] I> Found 42 partitions in SDMMC_USER (instance 3)
[0000.545] W> No valid slot number is found in scratch register
[0000.550] W> Return default slot: _a
[0000.553] I> Active Boot chain : 0
[0000.557] I> parsing oem signed section of bpmp-fw header done
[0000.562] I> bpmp-fw binary init read from storage
[0000.567] I> oem authentication of bpmp-fw header done
[0000.574] I> bpmp-fw binary done read from storage
[0000.576] I> bpmp-fw: Authentication init Done
[0000.581] I> parsing oem signed section of cpubl header done
[0000.586] I> cpubl binary init read from storage
[0000.591] I> bpmp-fw: Authentication Finalize Done
[0000.595] I> oem authentication of cpubl header done
[0000.600] I> cpubl binary done read from storage
[0000.605] I> cpubl: Authentication init Done
[0000.609] I> parsing oem signed section of rce header done
[0000.614] I> rce binary init read from storage
[0000.619] I> Relocating BR-BCT
[0000.621] I> cpubl: Authentication Finalize Done
[0000.626] I> oem authentication of rce header done
[0000.630] I> rce binary done read from storage
[0000.635] I> rce: Authentication init Done
[0000.639] I> parsing oem signed section of ape header done
[0000.644] I> ape binary init read from storage
[0000.648] I> rce: Authentication Finalize Done
[0000.653] I> oem authentication of ape header done
[0000.657] I> ape binary done read from storage
[0000.661] I> ape: Authentication init Done
[0000.666] I> parsing oem signed section of tos header done
[0000.671] I> tos binary init read from storage
[0000.675] I> ape: Authentication Finalize Done
[0000.680] I> oem authentication of tos header done
[0000.684] I> tos binary done read from storage
[0000.688] I> tos: Authentication init Done
[0000.692] I> parsing oem signed section of bpmp-fw-dtb header done
[0000.698] I> bpmp-fw-dtb binary init read from storage
[0000.703] I> tos: Authentication Finalize Done
[0000.709] I> oem authentication of bpmp-fw-dtb header done
[0000.713] I> bpmp-fw-dtb binary done read from storage
[0000.718] I> bpmp-fw-dtb: Authentication init Done
[0000.723] I> parsing oem signed section of cpubl-dtb header done
[0000.728] I> cpubl-dtb binary init read from storage
[0000.733] I> bpmp-fw-dtb: Authentication Finalize Done
[0000.770] I> oem authentication of cpubl-dtb header done
[0000.770] I> cpubl-dtb binary done read from storage
[0000.771] I> cpubl-dtb: Authentication init Done
[0000.773] I> parsing oem signed section of eks header done
[0000.773] I> eks binary init read from storage
[0000.774] I> cpubl-dtb: Authentication Finalize Done
[0000.775] I> oem authentication of eks header done
[0000.778] I> eks binary done read from storage
[0000.783] I> eks: Authentication init Done
[0000.786] I> eks: Authentication Finalize Done
[0000.791] I> EKB detected (length: 0x410) @ VA:0x5270a400
NOTICE:  BL31: v1.3(release):23b153a63
NOTICE:  BL31: Built : 22:43:07, Dec  9 2019
ipc-unittest-main: 1519: Welcome to IPC unittest!!!
ipc-unittest-main: 1531: waiting forever
ipc-unittest-srv: 329: Init unittest services!!!
keystore-demo: 141: Hello world from keystore-demo app
keystore-demo: 207: main: EKB contents match expected value
exit called, thread 0xffffffffea88ed58, name trusty_app_2_7d18fc60-e9fc-11e8
platform_bootstrap_epilog: trusty bootstrap complete


welcome to lk
calling constructors
initializing heap
creating bootstrap completion thread
top of bootstrap2()
initializing platform
bpmp: platform_init
tag is c1b4e372932429f2737cf722e1219e71
tag_show initialized
dt initialized
mail initialized
chipid initialized
fuse initialized
sku initialized
speedo initialized
ec_get_ec_list: found 45 ecs
ec initialized
ec_mrq initialized
vmon_populate_monitors: found 3 monitors
vmon initialized
adc initialized
fmon_populate_monitors: found 73 monitors
fmon initialized
fmon_mrq initialized
reset initialized
nvhs initialized
392 clocks registered
WARNING: pll_c4 has no dyn ramp
clk_mrq_init: mrq handler registered
clk initialized
nvlink initialized
io_dpd initialized
io_dpd initialized
thermal initialized
i2c5 controller initialized
initialized i2c mrq handling
i2c initialized
regulator initialized
avfs_clk_platform initialized
soctherm initialized
aotag initialized
powergate initialized
dvs initialized
pm initialized
pg_late initialized
strap initialized
tag initialized
emc initialized
clk_dt initialized
avfs_ccplex_platform initialized
tj_max: dt node not found
tj_init initialized
uphy_mrq_init: mrq handler registered
uphy_dt initialized
uphy initialized
safereg initialized

  [0001.204] I> Welcome to Cboot
mrq initialized
fmon_post initialized
[0001.205] I> Cboot Version: t194-8a9e8a5a
[0001.205] I> CPU-BL Params @ 0xf2820000
[0001.206] I>  0) Base:0x00000000 Size:0x00000000
[0001.207] I>  1) Base:0xf1100000 Size:0x00100000
[0001.211] I>  2) Base:0xf2000000 Size:0x00200000
[0001.216] I>  3) Base:0xf1200000 Size:0x00200000
[0001.220] I>  4) Base:0xf1000000 Size:0x00100000
[0001.225] I>  5) Base:0xf0f00000 Size:0x00100000clk_dt_late initialized
machine_check initialized
pm_post initialized
dbells initialized
avfs_clk_platform_post initialized
dmce initialized
cvc initialized
ccplex_avfs_hw_init: nafll_cluster0: not monitored
ccplex_avfs_hw_init: nafll_cluster1: not monitored
ccplex_avfs_hw_init: nafll_cluster2: not monitored
ccplex_avfs_hw_init: nafll_cluster3: not monitored
avfs_clk_mach_post initialized
regulator_post initialized
rm initialized
sc7_diag initialized
thermal_test initialized
serial_late initialized
clk_post initialized
clk_dt_post initialized
mc_reg initialized
pg_post initialized
dyn_modules initialized
sku_debugfs initialized
speedo_debugfs initialized
adc_debugfs initialized
clk_debugfs initialized

[0001.294] I>  6) Base:0xf3800000 Size:0x00400000
[0001.298] I>  7) Base:0xf1c00000 Size:0x00400000
[0001.303] I>  8) Base:0xf0e00000 Size:0x00100000
[0001.307] I>  9) Base:0xf0d00000 Size:0x00100000
emc_debugfs initialized
dvs_debugfs initialized
[0001.312] I> 10) Base:0xf3000000 Size:0x00800000
fmon_debugfs initialized
vmon_debugfs initialized
pg_debugfs initialized
profile_fs initialized
debugfs_cons initialized
mail_fs initialized
profile initialized
cvc_debugfs initialized
dmce_debugfs initialized
ec_debugfs initialized
rm_debugfs initialized
soctherm_debug initialized
gr_reader initialized
mods initialized
dt_fs initialized
debugfs_mrq initialized
debug_mrq initialized
debug_safereg initialized
initializing target
calling apps_init()
starting app shell
entering main console loop
] [0001.321] I> 11) Base:0x40000000 Size:0x00040000
[0001.371] I> 12) Base:0xf0c00000 Size:0x00100000
[0001.376] I> 13) Base:0x40046000 Size:0x00002000
[0001.380] I> 14) Base:0x40048000 Size:0x00002000
[0001.385] I> 15) Base:0xac000000 Size:0x00004000
[0001.389] I> 16) Base:0x4004a000 Size:0x00002000
[0001.394] I> 17) Base:0xf0b00000 Size:0x00100000
[0001.398] I> 18) Base:0x4004c000 Size:0x00002000
[0001.403] I> 19) Base:0xf2200000 Size:0x00600000
[0001.407] I> 20) Base:0x4004e000 Size:0x00002000
[0001.412] I> 21) Base:0xf09d0000 Size:0x0000c000
[0001.416] I> 22) Base:0x00000000 Size:0x00000000
[0001.420] I> 23) Base:0xf09e0000 Size:0x00020000
[0001.425] I> 24) Base:0xf6000000 Size:0x02000000
[0001.429] I> 25) Base:0x40050000 Size:0x00002000
[0001.434] I> 26) Base:0x40040000 Size:0x00006000
[0001.438] I> 27) Base:0xf1800000 Size:0x00400000
[0001.443] I> 28) Base:0xf4c00000 Size:0x01400000
[0001.447] I> 29) Base:0xf1400000 Size:0x00400000
[0001.452] I> 30) Base:0xf0a00000 Size:0x00100000
[0001.456] I> 31) Base:0x00000000 Size:0x00000000
[0001.461] I> 32) Base:0xf8000000 Size:0x08000000
[0001.465] I> 33) Base:0x00000000 Size:0x00000000
[0001.470] I> 34) Base:0xf3c00000 Size:0x01000000
[0001.474] I> 35) Base:0xab000000 Size:0x01000000
[0001.478] I> 36) Base:0xa0000000 Size:0x0b000000
[0001.483] I> 37) Base:0xf2800000 Size:0x00800000
[0001.487] I> 38) Base:0x80000000 Size:0x20000000
[0001.492] I> 39) Base:0xb0000000 Size:0x08000000
[0001.496] I> 40) Base:0x00000000 Size:0x00000000
[0001.501] I> 41) Base:0x00000000 Size:0x00000000
[0001.505] I> 42) Base:0x00000000 Size:0x00000000
[0001.510] I> 43) Base:0x00000000 Size:0x00000000
[0001.514] I> 44) Base:0x00000000 Size:0x00000000
[0001.519] I> 45) Base:0x00000000 Size:0x00000000
[0001.523] GIC-SPI Target CPU: 0
[0001.526] Interrupts Init done
[0001.529] calling constructors
[0001.532] initializing heap
[0001.534] I> Heap: [0xa0690588 ... 0xab000000]
[0001.539] initializing threads
[0001.542] initializing timers
[0001.544] creating bootstrap completion thread
[0001.549] top of bootstrap2()
[0001.552] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000
[0001.556] initializing platform
[0001.559] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0001.565] W> device prod register failed
[0001.568] I> Bl_dtb @0xaaf00000
[0001.576] E> "plugin-manager" doesn't exist, creating
[0001.576] E> "ids" doesn't exist, creating
[0001.581] E> "connection" doesn't exist, creating
[0001.585] E> "configs" doesn't exist, creating
[0001.596] I> Find /i2c@3160000's alias i2c0
[0001.597] I> Reading eeprom i2c=0 address=0x50
[0001.623] I> Device at /i2c@3160000:0x50
[0001.623] I> Reading eeprom i2c=0 address=0x56
[0001.647] I> Device at /i2c@3160000:0x56
[0001.650] I> Find /i2c@3180000's alias i2c2
[0001.650] I> Reading eeprom i2c=2 address=0x54
[0001.652] E> I2C: slave not found in slaves.
[0001.652] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true.
[0001.653] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.654] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 .
[0001.661] E> eeprom: Failed to read I2C slave device
[0001.666] I> Eeprom read failed 0x3526070d
[0001.670] I> Reading eeprom i2c=2 address=0x57
[0001.675] E> I2C: slave not found in slaves.
[0001.679] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true.
[0001.686] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.692] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 .
[0001.701] E> eeprom: Failed to read I2C slave device
[0001.706] I> Eeprom read failed 0x3526070d
[0001.710] I> Reading eeprom i2c=2 address=0x52
[0001.715] E> I2C: slave not found in slaves.
[0001.719] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true.
[0001.727] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.732] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 .
[0001.742] E> eeprom: Failed to read I2C slave device
[0001.746] I> Eeprom read failed 0x3526070d
[0001.752] I> Find /i2c@c240000's alias i2c1
[0001.754] I> Reading eeprom i2c=1 address=0x52
[0001.760] E> I2C: slave not found in slaves.
[0001.763] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true.
[0001.771] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.776] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 .
[0001.786] E> eeprom: Retry to read I2C slave device.
[0001.791] E> I2C: slave not found in slaves.
[0001.795] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true.
[0001.803] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.808] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 .
[0001.818] E> eeprom: Failed to read I2C slave device
[0001.822] I> Eeprom read failed 0x3526070d
[0001.826] I> Reading eeprom i2c=1 address=0x50
[0001.831] E> I2C: slave not found in slaves.
[0001.835] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[0001.843] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.848] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 .
[0001.858] E> eeprom: Retry to read I2C slave device.
[0001.863] E> I2C: slave not found in slaves.
[0001.867] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true.
[0001.874] E> I2C_DEV: Failed to send register address 0x00000000.
[0001.880] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 .
[0001.889] E> eeprom: Failed to read I2C slave device
[0001.894] I> Eeprom read failed 0x3526070d
[0001.898] I> create_pm_ids: id: 2888-0004-400-K, len: 15
[0001.903] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-confi3
[0001.914] I> create_pm_ids: id: 2822-0000-600-G, len: 15
[0001.920] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-confi3
[0001.931] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50
[0001.938] E> "i2c@3160000" doesn't exist, creating
[0001.942] E> "module@0x50" doesn't exist, creating
[0001.947] I> Adding plugin-manager/ids/2822-0000-600=/i2c@3160000:module@0x56
[0001.954] E> "module@0x56" doesn't exist, creating
[0001.962] I> Adding plugin-manager/cvm
[0001.963] E> "chip-id" doesn't exist, creating
[0001.966] I> Adding plugin-manager/chip-id/A02
[0001.971] I> Plugin-manager override starting
[0001.977] I> node /plugin-manager/fragement-tegra-wdt-en matches
[0001.987] I> node /plugin-manager/fragement-soft-wdt matches
[0001.998] I> node /plugin-manager/fragment-pcie-c5-rp matches
[0002.004] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches
[0002.026] I> Disable plugin-manager status in FDT
[0002.026] I> Plugin-manager override finished successfully
[0002.027] I> gpio framework initialized
[0002.029] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver
[0002.032] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver
[0002.032] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46
[0002.038] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0002.045] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0002.051] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0002.057] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44
[0002.065] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539
[0002.073] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539
[0002.079] W> tegrabl_tca9539_init: failed to fetch phandle from dt
[0002.087] I> fixed regulator driver initialized
[0002.097] I> register 'maxim' power off handle
[0002.098] I> virtual i2c enabled
[0002.098] I> registered 'maxim,max20024' pmic
[0002.101] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver
[0002.108] I> Boot-device: eMMC
[0002.111] I> Boot_device: SDMMC_BOOT instance: 3
[0002.119] I> sdmmc-3 params source = boot args
[0002.120] I> sdmmc bdev is already initialized
[0002.124] I> sdmmc-3 params source = boot args
[0002.154] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0002.167] I> Found 42 partitions in SDMMC_USER (instance 3)
[0002.178] I> enabling 'vdd-hdmi-5v0' regulator
[0002.183] I> regulator 'vdd-hdmi-5v0' already enabled
[0002.184] I> hdmi cable connected
[0002.186] E> set volts not configured for 'vdd-1v0'
[0002.188] E> set volts not configured for 'vdd-1v8-hs'
[0002.192] E> invalid display type
[0002.196] E> invalid display type
[0002.197] E> cannot find any other nvdisp nodes
[0002.212] I> edid read success
[0002.225] I> edid read success
[0002.225] I> width = 640, height = 480, frequency = 25174825
[0002.225] I> width = 640, height = 480, frequency = 25174825
[0002.226] I> width = 640, height = 480, frequency = 25174825
[0002.226] I> width = 1920, height = 1080, frequency = 148500000
[0002.227] I> width = 1360, height = 768, frequency = 85500000
[0002.230] I> width = 1920, height = 1080, frequency = 148500000
[0002.236] I> width = 1920, height = 540, frequency = 74250000
[0002.242] I> width = 1920, height = 1080, frequency = 148351648
[0002.248] I> width = 1920, height = 1080, frequency = 148351648
[0002.253] I> width = 1920, height = 1080, frequency = 74175824
[0002.259] I> width = 1280, height = 720, frequency = 74175824
[0002.265] I> width = 1280, height = 720, frequency = 74175824
[0002.270] I> width = 720, height = 576, frequency = 26973026
[0002.276] I> width = 720, height = 480, frequency = 26973026
[0002.281] I> width = 720, height = 576, frequency = 26973026
[0002.287] I> width = 720, height = 480, frequency = 26973026
[0002.292] I> width = 640, height = 480, frequency = 25174825
[0002.298] I> Best mode Width = 1920, Height = 1080, freq = 148351648
[0002.308] I> hdmi_enable, starting HDMI initialisation
[0002.313] I> hdmi_enable, HDMI initialisation complete
[0002.322] I> Load in CBoot Boot Options partition and parse it
[0002.323] E> Cannot read beyond partition boundary for CPUBL-CFG
[0002.326] E> tegrabl_read_cbo Failed to read CPUBL-CFG partition
[0002.331] W> platform_init: tegrabl_read_cbo failed with error 0xd0d0104
[0002.338] I> Hit any key to stop autoboot:     4       3       2       1
[0004.346] initializing target
[0004.346] calling apps_init()
[0004.347] starting app kernel_boot_app
[0004.366] I> found decompressor handler: lz4-legacy
[0004.367] I> decompressing BMP blob ...
[0004.372] I> Kernel type = Normal
[0004.372] I> Loading partition kernel-bootctrl at 0xa4ab0000 from device(0x1)
[0004.379] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid
[0004.379] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
[0004.380] I> ########## SD boot ##########
[0004.380] I> No sdcard
[0004.380] I> -0 params source =
[0004.383] E> Blockdev open: exit error
[0004.387] E> SD boot failed, err: 724238353
[0004.391] I> ########## USB boot ##########
[0004.399] W> No valid slot number is found in scratch register
[0004.400] W> Return default slot: _a
[0004.416] I> USB Firmware Version: 60.06 release
[0004.472] I> regulator of usb2-0 already enabled
[0004.479] I> regulator of usb2-1 already enabled
[0004.486] I> regulator of usb2-2 already enabled
[0004.496] I> enabling 'vdd-5v-sata' regulator
[0005.564] I> USB 2.0 port 1 new high-speed USB device detected
[0005.566] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9e800, cmd_ring.dm0
[0005.567] E> slot id is 1
[0005.568] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9e800, cmd_ring.dm0
[0005.573] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9e800, cmd_ring.dm0
[0005.577] I>
[0005.577] I> Enumerated USB Device 1a40:0801
[0005.581] I>
[0005.583] E> Enumerated device doesn't belong to MSD class or protocol is not bulk-only!!
[0005.591] E> USBMSD: Failed to initialize Enumerated USB device either not an MSD device or.
[0005.605] E> Error opening USBMSD driver 0, err: 7c7c0312
[0005.610] E> Failed to initialize device 5-0
[0005.615] E> USB boot failed, err: 2088502034
[0005.619] I> ########## Fixed storage boot ##########
[0005.624] I> Already published: 00010003
[0005.627] I> Look for boot partition
[0005.631] I> Fallback: assuming 0th partition is boot partition
[0005.637] I> Detect filesystem
[0005.664] I> Loading extlinux.conf ...
[0005.664] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf
[0005.701] I> L4T boot options
[0005.701] I> [1]: "primary kernel"
[0005.701] I> Enter choice:
[0008.702] I> Continuing with default option: 1
[0008.702] I> Loading kernel sig file from rootfs ...
[0008.702] I> rootfs path: /sdmmc_user/boot/Image.sig
[0008.721] I> Loading kernel binary from rootfs ...
[0008.721] I> rootfs path: /sdmmc_user/boot/Image
[0008.938] I> Validate kernel ...
[0008.938] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000
[0009.297] I> No kernel-dtb binary path
[0009.297] I> Loading kernel-dtb binary from partition ...
[0009.298] W> No valid slot number is found in scratch register
[0009.298] W> Return default slot: _a
[0009.298] I> A/B: bin_type (38) slot 0
[0009.299] I> Loading partition kernel-dtb at 0x91000000 from device(0x1)
[0009.309] I> Validate kernel-dtb ...
[0009.310] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000
[0009.315] I> Loading ramdisk from rootfs ...
[0009.316] I> rootfs path: /sdmmc_user/boot/initrd
[0009.367] I> Kernel hdr @0xa4ab0000
[0009.367] I> Kernel dtb @0x90000000
[0009.367] I> decompressor handler not found
[0009.368] I> Copying kernel image (34191376 bytes) from 0xa4ab0000 to 0x80080000 ... [0009.e
[0009.387] I> Updated bpmp info to DTB
[0009.388] I> Ramdisk: Base: 0x92000000; Size: 0x54ead4
[0009.388] I> Updated initrd info to DTB
[0009.389] W> WARN: Fail to override "console=none" in commandline
[0009.389] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params
[0009.390] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params
[0009.395] W> No valid slot number is found in scratch register
[0009.401] W> Return default slot: _a
[0009.404] I> Active slot suffix:
[0009.407] I> add_boot_slot_suffix: slot_suffix =
[0009.412] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0
[0009.451] I> Updated bootarg info to DTB
[0009.454] W> MAC addr invalid!
[0009.457] E> Failed to get WIFI MAC address
[0009.461] W> MAC addr invalid!
[0009.464] E> Failed to get Bluetooth MAC address
[0009.469] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:8d:78
[0009.475] E> "plugin-manager" doesn't exist, creating
[0009.480] I> Adding /chosen/plugin-manager/cvm
[0009.484] E> "chip-id" doesn't exist, creating
[0009.488] I> Adding /chosen/plugin-manager/chip-id
[0009.493] E> "configs" doesn't exist, creating
[0009.497] I> Adding /chosen/plugin-manager/configs
[0009.502] E> "ids" doesn't exist, creating
[0009.506] I> Adding /chosen/plugin-manager/ids
[0009.510] E> "odm-data" doesn't exist, creating
[0009.514] I> Adding /chosen/plugin-manager/odm-data
[0009.523] E> "memory" doesn't exist, creating
[0009.524] I> [0] START: 0x80000000, END: 0xac000000
[0009.528] I> [1] START: 0xac004000, END: 0xf09d0000
[0009.533] I> [2] START: 0xf09dc000, END: 0xf09e0000
[0009.537] I> dram_block larger than 80000000
[0009.541] I> [3] START: 0x100000000, END: 0x880000000
[0009.546] I> added [base:0x80000000, size:0x2c000000] to /memory
[0009.552] I> added [base:0xac200000, size:0x44600000] to /memory
[0009.558] I> added [base:0x100000000, size:0x780000000] to /memory
[0009.565] I> Updated memory info to DTB
[0009.568] E> add_disp_param: failed to get display params for du=1
[0009.574] E> "reset" doesn't exist, creating
[0009.579] I> NVG: Logical CPU: 0; MPIDR: 0x80000000
[0009.583] I> Enabled cpu-0 (mpidr: 0x0) node in FDT
[0009.587] I> NVG: Logical CPU: 1; MPIDR: 0x80000001
[0009.592] I> Enabled cpu-1 (mpidr: 0x1) node in FDT
[0009.597] I> NVG: Logical CPU: 2; MPIDR: 0x80000100
[0009.602] I> Enabled cpu-2 (mpidr: 0x100) node in FDT
[0009.606] I> NVG: Logical CPU: 3; MPIDR: 0x80000101
[0009.611] I> Enabled cpu-3 (mpidr: 0x101) node in FDT
[0009.616] I> NVG: Logical CPU: 4; MPIDR: 0x80000200
[0009.621] I> Enabled cpu-4 (mpidr: 0x200) node in FDT
[0009.626] I> NVG: Logical CPU: 5; MPIDR: 0x80000201
[0009.630] I> Enabled cpu-5 (mpidr: 0x201) node in FDT
[0009.635] I> NVG: Logical CPU: 6; MPIDR: 0x80000300
[0009.640] I> Enabled cpu-6 (mpidr: 0x300) node in FDT
[0009.645] I> NVG: Logical CPU: 7; MPIDR: 0x80000301
[0009.650] I> Enabled cpu-7 (mpidr: 0x301) node in FDT
[0009.656] E> "misc-data" doesn't exist, creating
[0009.659] I> Boot-device: eMMC
[0009.662] I> Add boot-sdmmc to plugin-manager/misc-data
[0009.667] I> Add storage-sdmmc to plugin-manager/misc-data
[0009.672] W> Unknown storage device
[0009.676] I> Add serial number:1420720030541 as DT property
[0009.682] I> Plugin-manager override starting
[0009.686] I> node /plugin-manager/fragement-tegra-wdt-en matches
[0009.693] I> node /plugin-manager/fragement-soft-wdt matches
[0009.700] I> node /plugin-manager/fragment-pcie-c5-rp matches
[0009.705] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches
[0009.716] I> Disable plugin-manager status in FDT
[0009.717] I> Plugin-manager override finished successfully
[0009.719] I> tegrabl_load_kernel_and_dtb: Done
[0009.748] I> Kernel EP: 0x80080000, DTB: 0x90000000
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-1935) (gcc version 7.3.1 29
[    0.000000] Boot CPU: AArch64 Processor [4e0f0040]
[    0.000000] OF: fdt:memory scan node memory, reg size 48,
[    0.000000] OF: fdt: - 80000000 ,  2c000000
[    0.000000] OF: fdt: - ac200000 ,  44600000
[    0.000000] OF: fdt: - 100000000 ,  780000000
[    0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '')
[    0.000000] bootconsole [tegra_comb_uart0] enabled
[    0.000000] Found tegra_fbmem: 00800000@a069b000
[    0.000000] Found lut_mem: 00002008@a0696000
<hit enter to activate fiq debugger>
WARNING: pll_d3 has no dyn ramp
[    6.215420] cgroup: cgroup2: unknown option "nsdelegate"
[    7.512812] using random self ethernet address
[    7.513005] using random host ethernet address
[    7.522295] random: crng init done
[    7.522441] random: 7 urandom warning(s) missed due to ratelimiting
[    7.976777] using random self ethernet address
[    7.976939] using random host ethernet address
[    8.292351] CPU4: shutdown
[    8.376245] CPU5: shutdown
[    8.500150] CPU6: shutdown
[    8.608354] CPU7: shutdown

Ubuntu 18.04.3 LTS localhost ttyTCU0
...