GMMK Pro & QMK: support Rotary Knob, VIA, turn off RGB when host is suspended

readme.md

• path: qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/viapro/readme.md

---

GMMK Pro & QMK

Compile

qmk compile -kb gmmk/pro/ansi -km viapro

config.h

// path: qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/viapro/config.h
#pragma once

#ifdef RGB_MATRIX_ENABLE
    #define RGB_DISABLE_WHEN_USB_SUSPENDED true
#endif // RGB_MATRIX_ENABLE

keymap.c

// path: qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/viapro/keymap.c
#include QMK_KEYBOARD_H

// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

//      ESC      F1       F2       F3       F4       F5       F6       F7       F8       F9       F10      F11      F12	     Prt           Rotary(Mute)
//      ~        1        2        3        4        5        6        7        8        9        0         -       (=)	     BackSpc           Home
//      Tab      Q        W        E        R        T        Y        U        I        O        P        [        ]        \                 PgUp
//      Caps     A        S        D        F        G        H        J        K        L        ;        "                 Enter             PgDn
//      Sh_L              Z        X        C        V        B        N        M        ,        .        ?                 Sh_R     Up       End
//      Ct_L     Win_L    Alt_L                               SPACE                               Alt_R    FN       Ct_R     Left     Down     Right


    // The FN key by default maps to a momentary toggle to layer 1 to provide access to the RESET key (to put the board into bootloader mode). Without
    // this mapping, you have to open the case to hit the button on the bottom of the PCB (near the USB cable attachment) while plugging in the USB
    // cable to get the board into bootloader mode - definitely not fun when you're working on your QMK builds. Remove this and put it back to KC_RGUI
    // if that's your preference.
    //
    // To put the keyboard in bootloader mode, use FN+backslash. If you accidentally put it into bootloader, you can just unplug the USB cable and
    // it'll be back to normal when you plug it back in.
    //
    // This keyboard defaults to 6KRO instead of NKRO for compatibility reasons (some KVMs and BIOSes are incompatible with NKRO).
    // Since this is, among other things, a "gaming" keyboard, a key combination to enable NKRO on the fly is provided for convenience.
    // Press Fn+N to toggle between 6KRO and NKRO. This setting is persisted to the EEPROM and thus persists between restarts.
    [0] = LAYOUT(
        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR,          KC_MUTE,
        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_HOME,
        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGDN,
        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,   KC_END,
        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
    ),

    [1] = LAYOUT(
        _______, KC_MYCM, KC_WHOM, KC_CALC, KC_MSEL, KC_MPRV, KC_MNXT, KC_MPLY, KC_MSTP, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,          _______,
        _______, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
        _______, _______, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,            _______,
        _______, _______, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
        _______,          _______, RGB_HUI, _______, _______, _______, NK_TOGG, _______, _______, _______, _______,          _______, RGB_MOD, _______,
        _______, _______, _______,                            _______,                            _______, _______, _______, RGB_SPD, RGB_RMOD, RGB_SPI
    ),

    [2] = LAYOUT(
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
    ),

    [3] = LAYOUT(
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
    ),

};
// clang-format on

#ifdef ENCODER_ENABLE
bool encoder_update_user(uint8_t index, bool clockwise) {
    if (clockwise) {
      tap_code(KC_VOLU);
    } else {
      tap_code(KC_VOLD);
    }
    return true;
}
#endif // ENCODER_ENABLE

#ifdef RGB_MATRIX_ENABLE
void suspend_power_down_kb(void) {
    rgb_matrix_set_suspend_state(true);
    suspend_power_down_user();
}

void suspend_wakeup_init_kb(void) {
    rgb_matrix_set_suspend_state(false);
    suspend_wakeup_init_user();
}
#endif // RGB_MATRIX_ENABLE

rules.mk

# path: qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/viapro/rules.mk
VIA_ENABLE = yes
RGB_MATRIX_ENABLE = yes

Cảm ơn anh đã chia sẻ, cho em hỏi là như vậy là đã full chức năng như Glorious Core Firmware chưa ạ?

hi! do you know where to get the sonix bootloader for gmmk pro?