Created
November 19, 2019 01:30
-
-
Save tjwebb/8f75822baf28f346110ffca359790364 to your computer and use it in GitHub Desktop.
S17 kernel log with blinking red fault light
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Booting Linux on physical CPU 0x0 | |
| Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Xilinx Zynq | |
| cma: Reserved 16 MiB at 0x0e000000 | |
| Memory policy: Data cache writealloc | |
| On node 0 totalpages: 61440 | |
| free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 | |
| Normal zone: 480 pages used for memmap | |
| Normal zone: 0 pages reserved | |
| Normal zone: 61440 pages, LIFO batch:15 | |
| percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 | |
| pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 | |
| pcpu-alloc: [0] 0 [0] 1 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 | |
| Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk | |
| PID hash table entries: 1024 (order: 0, 4096 bytes) | |
| Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
| Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
| Memory: 203500K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25876K reserved, 16384K cma-reserved, 0K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) | |
| lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc090c424 (9234 kB) | |
| .init : 0xc0a00000 - 0xc0b00000 (1024 kB) | |
| .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) | |
| .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) | |
| Preemptible hierarchical RCU implementation. | |
| Build-time adjustment of leaf fanout to 32. | |
| RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
| RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 | |
| NR_IRQS:16 nr_irqs:16 16 | |
| efuse mapped to cf800000 | |
| ps7-slcr mapped to cf802000 | |
| L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 | |
| L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 | |
| L2C-310 erratum 769419 enabled | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310 full line of zeros enabled for Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 1 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 8 ways, 512 kB | |
| L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 | |
| zynq_clock_init: clkc starts at cf802100 | |
| Zynq clock init | |
| sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns | |
| clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns | |
| Switching to timer-based delay loop, resolution 3ns | |
| clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns | |
| ps7-ttc #0 at cf80a000, irq=18 | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x100000 - 0x100058 | |
| CPU1: failed to boot: -1 | |
| Brought up 1 CPUs | |
| SMP: Total of 1 processors activated (666.66 BogoMIPS). | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor menu | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 | |
| vgaarb: loaded | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| media: Linux media interface: v0.10 | |
| Linux video capture interface: v2.00 | |
| pps_core: LinuxPPS API ver. 1 registered | |
| pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| PTP clock support registered | |
| EDAC MC: Ver: 3.0.0 | |
| Advanced Linux Sound Architecture Driver Initialized. | |
| clocksource: Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 2048 (order: 1, 8192 bytes) | |
| TCP bind hash table entries: 2048 (order: 2, 16384 bytes) | |
| TCP: Hash tables configured (established 2048 bind 2048) | |
| UDP hash table entries: 256 (order: 1, 8192 bytes) | |
| UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| PCI: CLS 0 bytes, default 64 | |
| Trying to unpack rootfs image as initramfs... | |
| rootfs image is not initramfs (no cpio magic); looks like an initrd | |
| Freeing initrd memory: 12836K (cce78000 - cdb01000) | |
| hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available | |
| futex hash table entries: 512 (order: 3, 32768 bytes) | |
| workingset: timestamp_bits=28 max_order=16 bucket_order=0 | |
| jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. | |
| io scheduler noop registered | |
| io scheduler deadline registered | |
| io scheduler cfq registered (default) | |
| dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 | |
| e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps | |
| console [ttyPS0] enabled | |
| xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| loop: module loaded | |
| CAN device driver interface | |
| gpiod_set_value: invalid GPIO | |
| libphy: MACB_mii_bus: probed | |
| macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) | |
| Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) | |
| e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-pci: EHCI PCI platform driver | |
| usbcore: registered new interface driver usb-storage | |
| mousedev: PS/2 mouse device common for all mice | |
| i2c /dev entries driver | |
| Xilinx Zynq CpuIdle Driver started | |
| sdhci: Secure Digital Host Controller Interface driver | |
| sdhci: Copyright(c) Pierre Ossman | |
| sdhci-pltfm: SDHCI platform and OF driver helper | |
| mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA | |
| ledtrig-cpu: registered to indicate activity on CPUs | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda | |
| nand: Micron MT29F2G08ABAGAWP | |
| nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 | |
| nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip | |
| Bad block table found at page 131008, version 0x01 | |
| Bad block table found at page 130944, version 0x01 | |
| 6 ofpart partitions found on MTD device pl35x-nand | |
| Creating 6 MTD partitions on "pl35x-nand": | |
| 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" | |
| 0x000002800000-0x000004800000 : "ramfs" | |
| 0x000004800000-0x000005000000 : "configs" | |
| 0x000005000000-0x000006000000 : "reserve" | |
| 0x000006000000-0x000008000000 : "ramfs-bak" | |
| 0x000008000000-0x000010000000 : "reserve1" | |
| NET: Registered protocol family 10 | |
| sit: IPv6 over IPv4 tunneling driver | |
| NET: Registered protocol family 17 | |
| can: controller area network core (rev 20120528 abi 9) | |
| NET: Registered protocol family 29 | |
| can: raw protocol (rev 20120528) | |
| can: broadcast manager protocol (rev 20120528 t) | |
| can: netlink gateway (rev 20130117) max_hops=1 | |
| zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' | |
| zynq_pm_late_init: Unable to map DDRC IO memory. | |
| Registering SWP/SWPB emulation handler | |
| hctosys: unable to open rtc device (rtc0) | |
| ALSA device list: | |
| No soundcards found. | |
| RAMDISK: gzip image found at block 0 | |
| EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities | |
| EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) | |
| VFS: Mounted root (ext4 filesystem) on device 1:0. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) | |
| EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr | |
| random: dd urandom read with 0 bits of entropy available | |
| ubi0: attaching mtd2 | |
| ubi0: scanning is finished | |
| ubi0: attached mtd2 (name "configs", size 8 MiB) | |
| ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
| ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
| ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
| ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 | |
| ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 | |
| ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 306349061 | |
| ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 | |
| ubi0: background thread "ubi_bgt0d" started, PID 708 | |
| UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 | |
| UBIFS (ubi0:0): recovery needed | |
| UBIFS (ubi0:0): recovery completed | |
| UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" | |
| UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
| UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) | |
| UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) | |
| UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 038216C1-D266-46DA-A76E-C04B142933A3, small LPT model | |
| ubi1: attaching mtd5 | |
| ubi1: scanning is finished | |
| ubi1: attached mtd5 (name "reserve1", size 128 MiB) | |
| ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
| ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
| ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
| ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 | |
| ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 | |
| ubi1: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1751317449 | |
| ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 | |
| ubi1: background thread "ubi_bgt1d" started, PID 720 | |
| UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 | |
| UBIFS (ubi1:0): recovery needed | |
| UBIFS (ubi1:0): recovery completed | |
| UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" | |
| UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
| UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) | |
| UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) | |
| UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 51C7124B-A562-4AA0-948B-184BE8DB9030, small LPT model | |
| IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz | |
| macb e000b000.ethernet eth0: link up (100/Full) | |
| IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| In axi fpga driver! | |
| request_mem_region OK! | |
| AXI fpga dev virtual address is 0xcfb38000 | |
| *base_vir_addr = 0xab013 | |
| In fpga mem driver! | |
| request_mem_region OK! | |
| fpga mem virtual address is 0xd2000000 | |
| IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz | |
| macb e000b000.ethernet eth0: link up (100/Full) | |
| IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| random: nonblocking pool is initialized | |
| 2019-11-19 01:18:44 driver-btm-api.c:768:init_freq_mode: This is scan-user version | |
| 2019-11-19 01:18:44 driver-btm-api.c:2094:bitmain_soc_init: opt_multi_version = 1 | |
| 2019-11-19 01:18:44 driver-btm-api.c:2095:bitmain_soc_init: opt_bitmain_ab = 1 | |
| 2019-11-19 01:18:44 driver-btm-api.c:2096:bitmain_soc_init: opt_bitmain_work_mode = 0 | |
| 2019-11-19 01:18:44 driver-btm-api.c:2097:bitmain_soc_init: Miner compile time: Tue Nov 5 15:18:02 CST 2019 type: Antminer S17 Pro | |
| 2019-11-19 01:18:44 driver-btm-api.c:2098:bitmain_soc_init: commit version: 0a8ed64 2019-11-05 10:49:32, build by: lol 2019-11-05 15:25:10 | |
| 2019-11-19 01:18:44 driver-btm-api.c:1905:show_sn: no SN got, please write SN to /nvdata/sn | |
| 2019-11-19 01:18:44 driver-btm-api.c:1261:miner_device_init: Detect 256MB control board of XILINX | |
| 2019-11-19 01:18:44 driver-btm-api.c:1209:init_fan_parameter: fan_eft : 0 fan_pwm : 0 | |
| 2019-11-19 01:18:44 thread.c:661:create_read_nonce_reg_thread: create thread | |
| 2019-11-19 01:18:50 driver-btm-api.c:1193:init_miner_version: miner ID : 812284042b10481c | |
| 2019-11-19 01:18:50 driver-btm-api.c:1199:init_miner_version: FPGA Version = 0xB013 | |
| 2019-11-19 01:18:55 driver-btm-api.c:837:get_product_id: product_id[0] = 0 | |
| 2019-11-19 01:18:55 driver-btm-api.c:837:get_product_id: product_id[1] = 0 | |
| 2019-11-19 01:18:55 driver-btm-api.c:837:get_product_id: product_id[2] = 0 | |
| 2019-11-19 01:18:55 driver-btm-api.c:781:_set_project_type: project:0 | |
| 2019-11-19 01:18:55 driver-btm-api.c:806:_set_project_type: Project type: Antminer S17 Pro | |
| 2019-11-19 01:18:55 driver-btm-api.c:817:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101 | |
| 2019-11-19 01:18:55 driver-btm-api.c:818:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103 | |
| 2019-11-19 01:18:55 driver-btm-api.c:817:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101 | |
| 2019-11-19 01:18:55 driver-btm-api.c:818:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103 | |
| 2019-11-19 01:18:55 driver-btm-api.c:817:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101 | |
| 2019-11-19 01:18:55 driver-btm-api.c:818:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103 | |
| 2019-11-19 01:18:56 driver-btm-api.c:2015:bitmain_board_init: Fan check passed. | |
| 2019-11-19 01:18:57 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app | |
| 2019-11-19 01:18:59 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9 | |
| 2019-11-19 01:19:00 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app | |
| 2019-11-19 01:19:02 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9 | |
| 2019-11-19 01:19:04 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app | |
| 2019-11-19 01:19:06 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9 | |
| 2019-11-19 01:19:06 thread.c:656:create_pic_heart_beat_thread: create thread | |
| 2019-11-19 01:19:06 power_api.c:202:power_init: Power init: | |
| 2019-11-19 01:19:06 power_api.c:203:power_init: current_voltage_raw = 0 | |
| 2019-11-19 01:19:06 power_api.c:204:power_init: highest_voltage_raw = 2100 | |
| 2019-11-19 01:19:06 power_api.c:205:power_init: working_voltage_raw = 1830 | |
| 2019-11-19 01:19:06 power_api.c:206:power_init: higher_voltage_raw = 1950 | |
| 2019-11-19 01:19:06 driver-btm-api.c:2025:bitmain_board_init: Enter 30s sleep to make sure power release finish. | |
| 2019-11-19 01:19:38 power_api.c:246:set_to_highest_voltage: Set to voltage raw 2100, one step. | |
| 2019-11-19 01:19:40 power_api.c:82:check_voltage_multi: retry time: 0 | |
| 2019-11-19 01:19:41 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.253095 | |
| 2019-11-19 01:19:42 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.326572 | |
| 2019-11-19 01:19:43 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.271465 | |
| 2019-11-19 01:19:43 power_api.c:50:_get_avg_voltage: average_voltage = 21.283711 | |
| 2019-11-19 01:19:43 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.28, check voltage passed. | |
| 2019-11-19 01:19:43 uart.c:71:set_baud: set fpga_baud to 115200 | |
| 2019-11-19 01:19:43 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 | |
| 2019-11-19 01:19:43 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 | |
| 2019-11-19 01:19:43 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 | |
| 2019-11-19 01:19:54 driver-btm-api.c:1136:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 0 | |
| 2019-11-19 01:20:05 driver-btm-api.c:1136:check_asic_number_with_power_on: Chain[1]: find 48 asic, times 0 | |
| 2019-11-19 01:20:16 driver-btm-api.c:1136:check_asic_number_with_power_on: Chain[2]: find 48 asic, times 0 | |
| 2019-11-19 01:20:21 driver-btm-api.c:343:set_order_clock: chain[0]: set order clock, stragegy 3 | |
| 2019-11-19 01:20:21 driver-btm-api.c:343:set_order_clock: chain[1]: set order clock, stragegy 3 | |
| 2019-11-19 01:20:22 driver-btm-api.c:343:set_order_clock: chain[2]: set order clock, stragegy 3 | |
| 2019-11-19 01:20:22 driver-hash-chip.c:490:set_clock_delay_control: core_data = 0x34 | |
| 2019-11-19 01:20:22 uart.c:71:set_baud: set fpga_baud to 3000000 | |
| 2019-11-19 01:20:22 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 3000000, chip_divider = 0 | |
| 2019-11-19 01:20:22 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 3000000, chip_divider = 0 | |
| 2019-11-19 01:20:22 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 3000000, chip_divider = 0 | |
| 2019-11-19 01:20:22 driver-btm-api.c:1786:check_clock_counter: freq 50 clock_counter_limit 6 | |
| 2019-11-19 01:20:24 uart.c:71:set_baud: set fpga_baud to 115200 | |
| 2019-11-19 01:20:24 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 | |
| 2019-11-19 01:20:24 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 | |
| 2019-11-19 01:20:24 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 | |
| 2019-11-19 01:20:24 voltage[0] = 1700 | |
| 2019-11-19 01:20:24 voltage[1] = 1700 | |
| 2019-11-19 01:20:24 voltage[2] = 1700 | |
| 2019-11-19 01:20:24 power_api.c:214:set_working_voltage_raw: working_voltage_raw = 1700 | |
| 2019-11-19 01:20:25 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. | |
| 2019-11-19 01:20:27 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. | |
| 2019-11-19 01:20:28 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. | |
| 2019-11-19 01:20:28 uart.c:71:set_baud: set fpga_baud to 6000000 | |
| 2019-11-19 01:20:28 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[0]: chip baud = 6000000, chip_divider = 7 | |
| 2019-11-19 01:20:28 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[1]: chip baud = 6000000, chip_divider = 7 | |
| 2019-11-19 01:20:28 driver-hash-chip.c:233:dhash_chip_set_baud_v2: chain[2]: chip baud = 6000000, chip_divider = 7 | |
| 2019-11-19 01:20:30 driver-btm-api.c:243:check_bringup_temp: Bring up temperature is 22 | |
| 2019-11-19 01:20:30 thread.c:676:create_check_miner_status_thread: create thread | |
| 2019-11-19 01:20:30 thread.c:666:create_set_miner_status_thread: create thread | |
| 2019-11-19 01:20:30 thread.c:651:create_temperature_monitor_thread: create thread | |
| 2019-11-19 01:20:30 freq_tuning.c:193:freq_tuning_get_max_freq: Max freq of tuning is 715 | |
| 2019-11-19 01:20:30 frequency.c:506:increase_freq_by_frequency_list_slowly: Increase freq slowly for all chain to 450 | |
| 2019-11-19 01:20:30 frequency.c:363:auto_adaption_high_voltage_increase_frequency: auto adaption increase frequency from 50.000000 to 450.000000 at voltage 2020. | |
| 2019-11-19 01:20:30 frequency.c:364:auto_adaption_high_voltage_increase_frequency: index 0 2 | |
| 2019-11-19 01:20:30 power_api.c:282:set_to_voltage_by_steps: Set to voltage raw 2020, step by step. | |
| 2019-11-19 01:20:48 power_api.c:82:check_voltage_multi: retry time: 0 | |
| 2019-11-19 01:20:49 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 20.420361 | |
| 2019-11-19 01:20:50 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 20.469345 | |
| 2019-11-19 01:20:51 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 20.432607 | |
| 2019-11-19 01:20:51 power_api.c:50:_get_avg_voltage: average_voltage = 20.440771 | |
| 2019-11-19 01:20:51 power_api.c:68:check_voltage: target_vol = 20.20, actural_vol = 20.44, check voltage passed. | |
| 2019-11-19 01:20:51 driver-btm-api.c:664:increase_freq_slowly: init_freq = 50.00, final_freq = 450.00, freq_step = 5.00, chain = 255 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I have the same problem, have you solved?