Skip to content

Instantly share code, notes, and snippets.

@tmcintos
Created March 29, 2023 07:10
Show Gist options
  • Save tmcintos/365cc0a1f031aee333d02c1c18f24146 to your computer and use it in GitHub Desktop.
Save tmcintos/365cc0a1f031aee333d02c1c18f24146 to your computer and use it in GitHub Desktop.
SuperMicro P5STE CMOS/BIOS battery replacement with external battery connected via EXT BATTERY pin header
As described in <https://pcrebuilding.altervista.org/9/download/57a34d9c0195f_SUPERMICRO_P55T2S_jumper_settings.pdf>, the external battery header pinout is as follows:
JP30: Optional External battery, pin1: +3V, pin2 and pin3: No Connect, pin4: Ground
Note: pin3 (GND) is nearest the ATX power connector (top end of board in tower configuration).
I have had success removing the soldered battery and connectng a battery pack containing 2x AA batteries in series (+3V) to this connector.
Note that if 3x AA batteries are used (4.5V), the machine will not boot.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment