bootlog2.txt

[    0.000000] Booting Linux on
 physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.4.89 (nixbld@localhost) (gcc version 9.3.0 (GCC)) #1-NixOS SMP Tue Jan 12 19:16:25 UTC 2021
[    0.000000] Machine model: FriendlyElec NanoPC-T4
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 32 MiB at 0x00000000f6000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf57ef800-0xf57f0fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 32 pages/cpu s92632 r8192 d30248 u131072
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: systemConfig=/nix/store/3s9a230xdhx9v6schcaa6l32l3lwyy9d-nixos-system-nixos-20.09.2623.97a13fb97
fc init=/nix/store/3s9a230xdhx9v6schcaa6l32l3lwyy9d-nixos-system-nixos-20.09.2623.97a13fb97fc/init cma=32M console=ttyS2,115200n8 co
nsole=ttyAMA0,115200n8 console=tty0 loglevel=7
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3901420K/4061184K available (16124K kernel code, 2942K rwdata, 8196K rodata, 8448K init, 558K bss, 126996K re
served, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] ftrace: allocating 53606 entries in 210 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=6.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f4a00000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000f49a0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f49b0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x310/0x4a4 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003477] Console: colour dummy device 80x25
[    0.004324] printk: console [tty0] enabled
[    0.004473] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.004510] pid_max: default: 32768 minimum: 301
[    0.004680] LSM: Security Framework initializing
[    0.004715] Yama: becoming mindful.
[    0.004835] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.004882] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.007315] ASID allocator initialised with 32768 entries
[    0.007497] rcu: Hierarchical SRCU implementation.
[    0.010754] Platform MSI: interrupt-controller@fee20000 domain created
[    0.011211] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.017773] EFI services will not be available.
[    0.018351] smp: Bringing up secondary CPUs ...
[    0.019159] Detected VIPT I-cache on CPU1
[    0.019198] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.019213] GICv3: CPU1: using allocated LPI pending table @0x00000000f49c0000
[    0.019269] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.020120] Detected VIPT I-cache on CPU2
[    0.020148] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.020162] GICv3: CPU2: using allocated LPI pending table @0x00000000f49d0000
[    0.020197] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.021103] Detected VIPT I-cache on CPU3
[    0.021130] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.021144] GICv3: CPU3: using allocated LPI pending table @0x00000000f49e0000
[    0.021178] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.021992] CPU features: detected: EL2 vector hardening
[    0.022002] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.022011] Detected PIPT I-cache on CPU4
[    0.022041] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.022055] GICv3: CPU4: using allocated LPI pending table @0x00000000f49f0000
[    0.022093] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.022921] Detected PIPT I-cache on CPU5
[    0.022947] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.022959] GICv3: CPU5: using allocated LPI pending table @0x00000000f4a80000
[    0.022989] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.023118] smp: Brought up 1 node, 6 CPUs
[    0.023442] SMP: Total of 6 processors activated.
[    0.023461] CPU features: detected: 32-bit EL0 Support
[    0.023481] CPU features: detected: CRC32 instructions
[    0.054108] CPU: All CPU(s) started at EL2
[    0.054238] alternatives: patching kernel code
[    0.058522] devtmpfs: initialized
[    0.069461] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.069501] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.070581] pinctrl core: initialized pinctrl subsystem
[    0.072174] DMI not present or invalid.
[    0.072570] NET: Registered protocol family 16
[    0.075013] DMA: preallocated 256 KiB pool for atomic allocations
[    0.075037] audit: initializing netlink subsys (disabled)
[    0.075218] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[    0.076614] cpuidle: using governor menu
[    0.076935] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.078787] Serial: AMBA PL011 UART driver
[    0.125385] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.125413] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.125429] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.125445] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.127615] cryptd: max_cpu_qlen set to 1000
[    0.131417] fbcon: Taking over console
[    0.131447] ACPI: Interpreter disabled.
[    0.135080] vcc3v3_sys: supplied by vcc12v0_sys
[    0.135142] vcc5v0_sys: supplied by vcc12v0_sys
[    0.135205] vcc3v0_sd: supplied by vcc3v3_sys
[    0.135275] vbus_typec: supplied by vcc5v0_sys
[    0.135326] vcc5v0_host0: supplied by vcc5v0_sys
[    0.136119] iommu: Default domain type: Translated
[    0.137997] vgaarb: loaded
[    0.138455] SCSI subsystem initialized
[    0.138869] usbcore: registered new interface driver usbfs
[    0.138920] usbcore: registered new interface driver hub
[    0.138983] usbcore: registered new device driver usb
[    0.140346] pps_core: LinuxPPS API ver. 1 registered
[    0.140361] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.140388] PTP clock support registered
[    0.140616] EDAC MC: Ver: 3.0.0
[    0.142583] FPGA manager framework
[    0.142689] Advanced Linux Sound Architecture Driver Initialized.
[    0.143547] clocksource: Switched to clocksource arch_sys_counter
[    0.876575] VFS: Disk quotas dquot_6.6.0
[    0.876659] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.876883] pnp: PnP ACPI: disabled
[    0.885419] thermal_sys: Registered thermal governor 'step_wise'
[    0.885423] thermal_sys: Registered thermal governor 'power_allocator'
[    0.886161] NET: Registered protocol family 2
[    0.886863] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.886961] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.887322] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.888084] TCP: Hash tables configured (established 32768 bind 32768)
[    0.888227] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.888372] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.888664] NET: Registered protocol family 1
[    0.889258] RPC: Registered named UNIX socket transport module.
[    0.889275] RPC: Registered udp transport module.
[    0.889287] RPC: Registered tcp transport module.
[    0.889299] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.889315] NET: Registered protocol family 44
[    0.889337] PCI: CLS 0 bytes, default 64
[    0.889489] Trying to unpack rootfs image as initramfs...
[    1.486552] Freeing initrd memory: 9864K
[    1.487709] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.488072] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.488525] kvm [1]: IPA Size Limit: 40bits
[    1.489603] kvm [1]: vgic-v2@fff20000
[    1.489641] kvm [1]: GIC system register CPU interface enabled
[    1.489872] kvm [1]: vgic interrupt IRQ10
[    1.490130] kvm [1]: Hyp mode initialized successfully
[    1.495687] Initialise system trusted keyrings
[    1.495881] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    1.501654] zbud: loaded
[    1.503312] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.504088] NFS: Registering the id_resolver key type
[    1.504120] Key type id_resolver registered
[    1.504133] Key type id_legacy registered
[    1.504153] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.504337] 9p: Installing v9fs 9p2000 file system support
[    1.527005] Key type asymmetric registered
[    1.527022] Asymmetric key parser 'x509' registered
[    1.527066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.527214] io scheduler mq-deadline registered
[    1.527229] io scheduler kyber registered
[    1.552482] EINJ: ACPI disabled.
[    1.562587] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.562615] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.563855] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.563880] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.576573] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.578926] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[    1.579092] serial serial0: tty port ttyS0 registered
[    1.579617] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[    2.812192] printk: console [ttyS2] enabled
[    2.818842] SuperH (H)SCI(F) driver initialized
[    2.824984] msm_serial: driver initialized
[    2.832043] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.846891] brd: module loaded
[    2.859306] loop: module loaded
[    2.870581] libphy: Fixed MDIO Bus: probed
[    2.875499] tun: Universal TUN/TAP device driver, 1.6
[    2.882505] thunder_xcv, ver 1.0
[    2.886175] thunder_bgx, ver 1.0
[    2.889833] nicpf, ver 1.0
[    2.894000] hclge is initializing
[    2.897721] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    2.905810] hns3: Copyright (c) 2017 Huawei Corporation.
[    2.911820] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.918358] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.925025] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    2.932824] igb: Copyright (c) 2007-2014 Intel Corporation.
[    2.939102] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    2.947874] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    2.955129] sky2: driver version 1.30
[    2.960448] VFIO - User Level meta-driver version: 0.3
[    2.973006] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[    2.990425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.997794] ehci-pci: EHCI PCI platform driver
[    3.002822] ehci-platform: EHCI generic platform driver
[    3.010948] ehci-platform fe380000.usb: EHCI Host Controller
[    3.017320] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    3.026217] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[    3.047574] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    3.055183] hub 1-0:1.0: USB hub found
[    3.059432] hub 1-0:1.0: 1 port detected
[    3.066351] ehci-platform fe3c0000.usb: EHCI Host Controller
[    3.072720] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    3.081595] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[    3.103575] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    3.111113] hub 2-0:1.0: USB hub found
[    3.115359] hub 2-0:1.0: 1 port detected
[    3.120341] ehci-orion: EHCI orion driver
[    3.125087] ehci-exynos: EHCI EXYNOS driver
[    3.129955] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.136898] ohci-pci: OHCI PCI platform driver
[    3.141937] ohci-platform: OHCI generic platform driver
[    3.148005] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    3.155558] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    3.164435] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[    3.232148] hub 3-0:1.0: USB hub found
[    3.236395] hub 3-0:1.0: 1 port detected
[    3.241256] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    3.248787] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    3.257652] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[    3.328151] hub 4-0:1.0: USB hub found
[    3.332395] hub 4-0:1.0: 1 port detected
[    3.337335] ohci-exynos: OHCI EXYNOS driver
[    3.342853] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.349046] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    3.357764] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    3.368312] xhci-hcd xhci-hcd.0.auto: irq 225, io mem 0xfe800000
[    3.375814] hub 5-0:1.0: USB hub found
[    3.380067] hub 5-0:1.0: 1 port detected
[    3.384779] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.390944] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    3.399546] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    3.406931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.416527] hub 6-0:1.0: USB hub found
[    3.420771] hub 6-0:1.0: 1 port detected
[    3.425636] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.431808] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    3.440540] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    3.451106] xhci-hcd xhci-hcd.1.auto: irq 226, io mem 0xfe900000
[    3.458551] hub 7-0:1.0: USB hub found
[    3.462802] hub 7-0:1.0: 1 port detected
[    3.467494] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.473664] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    3.482255] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    3.489646] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.499239] hub 8-0:1.0: USB hub found
[    3.503489] hub 8-0:1.0: 1 port detected
[    3.508408] usbcore: registered new interface driver usb-storage
[    3.520579] i2c /dev entries driver
[    3.528586] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.537605] vdd_cpu_b: supplied by vcc3v3_sys
[    3.543156] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    3.552127] vdd_gpu: supplied by vcc3v3_sys
[    3.557507] rk808 0-001b: chip id: 0x0
[    3.566778] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    3.573751] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.581498] vdd_center: supplied by vcc3v3_sys
[    3.587025] vdd_cpu_l: supplied by vcc3v3_sys
[    3.592145] vcc_ddr: supplied by vcc3v3_sys
[    3.597369] vcc_1v8: supplied by vcc3v3_sys
[    3.603263] vcc1v8_cam: supplied by vcc3v3_sys
[    3.609149] vcc3v0_touch: supplied by vcc3v3_sys
[    3.615384] vcc1v8_pmupll: supplied by vcc3v3_sys
[    3.621729] vcc_sdio: supplied by vcc3v3_sys
[    3.627408] vcca3v0_codec: supplied by vcc3v3_sys
[    3.633743] vcc_1v5: supplied by vcc3v3_sys
[    3.639366] vcca1v8_codec: supplied by vcc3v3_sys
[    3.645694] vcc_3v0: supplied by vcc3v3_sys
[    3.650617] vcc3v3_s3: supplied by vcc3v3_sys
[    3.655752] vcc3v3_s0: supplied by vcc3v3_sys
[    3.675878] sdhci: Secure Digital Host Controller Interface driver
[    3.682798] sdhci: Copyright(c) Pierre Ossman
[    3.687976] Synopsys Designware Multimedia Card Interface Driver
[    3.695258] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    3.703356] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    3.710950] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    3.717395] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[    3.728347] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    3.734967] mmc_host mmc0: card is non-removable.
[    3.753429] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.776834] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    3.784949] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    3.792545] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    3.799001] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[    3.799611] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[    3.810013] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[    3.826337] random: fast init done
[    3.835682] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.859227] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.865739] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.872850] mmc2: CQHCI version 5.10
[    3.877248] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.885618] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.895189] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.902686] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    3.905865] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[    3.917161] ledtrig-cpu: registered to indicate activity on CPUs
[    3.924489] hidraw: raw HID events driver (C) Jiri Kosina
[    3.930754] usbcore: registered new interface driver usbhid
[    3.936987] usbhid: USB HID core driver
[    3.944418] drop_monitor: Initializing network drop monitor service
[    3.951746] NET: Registered protocol family 10
[    3.957199] Segment Routing with IPv6
[    3.961329] NET: Registered protocol family 17
[    3.966558] 9pnet: Installing 9P2000 support
[    3.971399] Key type dns_resolver registered
[    3.976574] registered taskstats version 1
[    3.981160] Loading compiled-in X.509 certificates
[    3.986400] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    3.986670] zswap: loaded using pool lzo/zbud
[    4.002676] Key type ._fscrypt registered
[    4.007195] Key type .fscrypt registered
[    4.026037] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.033937] hub 7-1:1.0: USB hub found
[    4.035561] hctosys: unable to open rtc device (rtc0)
[    4.038327] hub 7-1:1.0: 4 ports detected
[    4.044236] ALSA device list:
[    4.051570]   No soundcards found.
[    4.055493] mmc2: Command Queue Engine enabled
[    4.060521] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[    4.062038] Freeing unused kernel memory: 8448K
[    4.068070] mmcblk2: mmc2:0001 AJTD4R 14.6 GiB
[    4.072775] Run /init as init process
[    4.077850] mmcblk2boot0: mmc2:0001 AJTD4R partition 1 4.00 MiB
[    4.088622] mmcblk2boot1: mmc2:0001 AJTD4R partition 2 4.00 MiB
[    4.095353] mmcblk2rpmb: mmc2:0001 AJTD4R partition 3 4.00 MiB, chardev (236:0)
[    4.098170]  mmcblk2: p1
[    4.177036] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    4.261102] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 208
[    4.272670] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    4.393668] random: lvm: uninitialized urandom read (4 bytes read)
[    4.455776] usb 7-1.1: new full-speed USB device number 3 using xhci-hcd
[    4.803582] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7
/7-1/7-1.1/7-1.1:1.0/0003:1A86:E050.0001/input/input1
[    4.880879] hid-generic 0003:1A86:E050.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] o
n usb-xhci-hcd.1.auto-1.1/input0
[    4.898960] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 System Control as /devices/platform/usb@fe900000/fe900000.usb/xhci-
hcd.1.auto/usb7/7-1/7-1.1/7-1.1:1.1/0003:1A86:E050.0002/input/input2
[    4.976023] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 Consumer Control as /devices/platform/usb@fe900000/fe900000.usb/xhc
i-hcd.1.auto/usb7/7-1/7-1.1/7-1.1:1.1/0003:1A86:E050.0002/input/input3
[    4.996201] hid-generic 0003:1A86:E050.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on
usb-xhci-hcd.1.auto-1.1/input1
[    5.014579] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 Mouse as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.aut
o/usb7/7-1/7-1.1/7-1.1:1.2/0003:1A86:E050.0003/input/input4
[    5.033657] hid-generic 0003:1A86:E050.0003: input,hidraw2: USB HID v1.10 Mouse [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on u
sb-xhci-hcd.1.auto-1.1/input2
[    5.051211] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 System Control as /devices/platform/usb@fe900000/fe900000.usb/xhci-
hcd.1.auto/usb7/7-1/7-1.1/7-1.1:1.3/0003:1A86:E050.0004/input/input5
[    5.128049] input: USB Keyboard-Mouse USB Keyboard-Mouse_V1.7 Consumer Control as /devices/platform/usb@fe900000/fe900000.usb/xhc
i-hcd.1.auto/usb7/7-1/7-1.1/7-1.1:1.3/0003:1A86:E050.0004/input/input6
[    5.148173] hid-generic 0003:1A86:E050.0004: input,hidraw3: USB HID v1.10 Device [USB Keyboard-Mouse USB Keyboard-Mouse_V1.7] on
usb-xhci-hcd.1.auto-1.1/input3
[    7.747858] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null)
[    8.049168] EXT4-fs (mmcblk2p1): re-mounted. Opts: (null)
[    8.055952] booting system configuration /nix/store/3s9a230xdhx9v6schcaa6l32l3lwyy9d-nixos-system-nixos-20.09.2623.97a13fb97fc
[    8.182088] random: perl: uninitialized urandom read (4 bytes read)
[    8.439759] random: perl: uninitialized urandom read (4 bytes read)
[    8.759456] random: mktemp: uninitialized urandom read (10 bytes read)
[    9.075291] systemd[1]: System time before build time, advancing clock.
[    9.106483] systemd[1]: systemd 246 running in system mode. (+PAM +AUDIT -SELINUX +IMA +APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPT
SETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -ZSTD +SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    9.131255] systemd[1]: Detected architecture arm64.
[    9.157359] systemd[1]: Set hostname to <nixos>.
[    9.179628] random: crng init done
[    9.183466] random: 2 urandom warning(s) missed due to ratelimiting
[    9.197969] ttyS2 - failed to request DMA
[    9.417191] systemd[1]: Queued start job for default target Multi-User System.
[    9.426999] systemd[1]: cgroup compatibility translation between legacy and unified hierarchy settings activated. See cgroup-comp
at debug messages for details.
[    9.444159] systemd[1]: Created slice system-getty.slice.
[    9.451423] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    9.459459] systemd[1]: Created slice User and Session Slice.
[    9.466179] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.475219] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.483914] systemd[1]: Reached target Local Encrypted Volumes.
[    9.490653] systemd[1]: Reached target Containers.
[    9.496144] systemd[1]: Reached target Paths.
[    9.501105] systemd[1]: Reached target Remote File Systems.
[    9.507425] systemd[1]: Reached target Slices.
[    9.512484] systemd[1]: Reached target Swap.
[    9.517355] systemd[1]: Reached target System Time Synchronized.
[    9.524171] systemd[1]: Reached target ZFS pool import target.
[    9.533396] systemd[1]: Listening on Process Core Dump Socket.
[    9.540399] systemd[1]: Listening on Journal Audit Socket.
[    9.546841] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.553762] systemd[1]: Listening on Journal Socket.
[    9.559705] systemd[1]: Listening on udev Control Socket.
[    9.566004] systemd[1]: Listening on udev Kernel Socket.
[    9.574822] systemd[1]: Mounting Huge Pages File System...
[    9.583880] systemd[1]: Mounting POSIX Message Queue File System...
[    9.593552] systemd[1]: Mounting Kernel Debug File System...
[    9.602837] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    9.612694] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    9.626188] systemd[1]: Starting Journal Service...
[    9.634587] systemd[1]: Starting Load Kernel Modules...
[    9.643975] systemd[1]: Starting Remount Root and Kernel File Systems...
[    9.654691] systemd[1]: Starting Coldplug All udev Devices...
[    9.665000] systemd[1]: Mounted Huge Pages File System.
[    9.671585] systemd[1]: Mounted POSIX Message Queue File System.
[    9.678951] systemd[1]: Mounted Kernel Debug File System.
[    9.685667] EXT4-fs (mmcblk2p1): re-mounted. Opts: (null)
[    9.686569] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if
 you need this.
[    9.686939] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    9.716063] audit: type=1130 audit(315532800.640:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm=
"systemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=succe
ss'
[    9.719076] systemd[1]: Finished Remount Root and Kernel File Systems.
[    9.750668] audit: type=1130 audit(315532800.672:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm
="systemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=succ
ess'
[    9.753162] systemd[1]: Starting Load/Save Random Seed...
[    9.786169] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.795197] systemd[1]: Started Journal Service.
[    9.803043] audit: type=1130 audit(315532800.724:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="
systemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=succes
s'
[    9.806500] spl: loading out-of-tree module taints kernel.
[    9.835726] audit: type=1130 audit(315532800.760:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed com
m="systemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=suc
cess'
[    9.862565] audit: type=1130 audit(315532800.784:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-
dev comm="systemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[    9.893088] znvpair: module license 'CDDL' taints kernel.
[    9.899195] Disabling lock debugging due to kernel taint
[    9.934692] audit: type=1130 audit(315532800.856:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger co
mm="systemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=su
ccess'
[   10.052132] audit: type=1130 audit(315532800.972:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush c
omm="systemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=s
uccess'
[   10.093239] audit: type=1130 audit(315532801.016:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="sys
temd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.382211] vcc1v8_s3: supplied by vcc_1v8
[   10.405915] input: adc-keys as /devices/platform/adc-keys/input/input7
[   10.473075] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[   10.480571] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[   10.508083] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[   10.516436] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[   10.519633] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[   10.530363] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[   10.538869] mc: Linux media interface: v0.10
[   10.542955] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[   10.556251] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[   10.564170] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[   10.570529] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[   10.574956] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
[   10.576893] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[   10.591480] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[   10.599323] rockchip-pcie f8000000.pcie:   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[   10.607931] rockchip-pcie f8000000.pcie:    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[   10.616746] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[   10.624170] pci_bus 0000:00: root bus resource [bus 00-1f]
[   10.630330] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[   10.638055] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[   10.647603] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[   10.648805] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
[   10.656547] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[   10.663346] pci 0000:00:00.0: supports D1
[   10.667338] videodev: Linux video capture interface: v2.00
[   10.675079] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[   10.680690] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[   10.695082] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   10.704211] pci 0000:01:00.0: [126f:2263] type 00 class 0x010802
[   10.711100] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[   10.718863] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[   10.728552] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
[   10.735686] Registered IR keymap rc-empty
[   10.736947] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:00.0 (capable of 31.504
Gb/s with 8 GT/s x4 link)
[   10.750656] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
[   10.758231] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
[   10.771389] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
[   10.779099] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64bit]
[   10.787317] pci 0000:00:00.0: PCI bridge to [bus 01]
[   10.792870] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
[   10.800629] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[   10.807660] pcieport 0000:00:00.0: PME: Signaling with IRQ 237
[   10.815623] pcieport 0000:00:00.0: AER: enabled with IRQ 237
[   10.816646] rk808-rtc rk808-rtc: registered as rtc0
[   10.817046] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input8
[   10.836632] rockchip-vop ff8f0000.vop: Adding to iommu group 1
[   10.842293] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   10.855707] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[   10.871644] rk_gmac-dwmac fe300000.ethernet:         DWMAC1000
[   10.877509] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[   10.885888] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[   10.887020] rockchip-rga ff680000.rga: HW Version: 0x03.02
[   10.891619] rockchip-vop ff900000.vop: Adding to iommu group 2
[   10.894259] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[   10.894262] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[   10.894264] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[   10.897434] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[   10.900836] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[   10.907530] panfrost ff9a0000.gpu: clock rate = 500000000
[   10.919845] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[   10.921691] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.939690] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[   10.950234] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[   10.952344] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[   10.962558] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[   10.962561] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   10.964673] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   10.966128] Bluetooth: Core ver 2.22
[   10.966204] NET: Registered protocol family 31
[   10.966206] Bluetooth: HCI device and connection manager initialized
[   10.966215] Bluetooth: HCI socket layer initialized
[   10.966219] Bluetooth: L2CAP socket layer initialized
[   10.966226] Bluetooth: SCO socket layer initialized
[   10.967856] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   10.967864] cfg80211: failed to load regulatory.db
[   10.969963] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0
x7
[   11.024895] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[   11.025185] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[   11.025477] libphy: stmmac: probed
[   11.040576] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.048242] Bluetooth: HCI UART driver ver 2.3
[   11.048473] [drm] No driver support for vblank timestamp query.
[   11.053883] Bluetooth: HCI UART protocol H4 registered
[   11.063729] [drm] Cannot find any crtc or sizes
[   11.068899] Bluetooth: HCI UART protocol BCSP registered
[   11.074159] mousedev: PS/2 mouse device common for all mice
[   11.082947] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[   11.133887] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[   11.144648] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 1
[   11.161486] Bluetooth: HCI UART protocol LL registered
[   11.178877] usbcore: registered new interface driver brcmfmac
[   11.187377] Bluetooth: HCI UART protocol Broadcom registered
[   11.194466] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4356-sdio.friendlyarm,nanopc-t4.txt failed with error -2
[   11.207462] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4356-sdio.txt failed with error -2
[   11.307795] ttyS0 - failed to request DMA
[   11.308563] nvme nvme0: pci function 0000:01:00.0
[   11.317640] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[   11.435862] nvme nvme0: missing or invalid SUBNQN field.
[   11.542428] nvme nvme0: allocated 64 MiB host memory buffer.
[   11.563529] nvme nvme0: 6/0/0 default/read/poll queues
[   11.577886]  nvme0n1: p1
[   11.591624] audit: type=1130 audit(315532802.512:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="s
ystemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=success
'
[   11.618628] Bluetooth: hci0: BCM: chip id 101
[   11.624200] Bluetooth: hci0: BCM: features 0x2f
[   11.630482] Bluetooth: hci0: BCM4354A2
[   11.634689] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[   11.641361] bluetooth hci0: Direct firmware load for brcm/BCM4356A2.hcd failed with error -2
[   11.650812] Bluetooth: hci0: BCM: Patch brcm/BCM4356A2.hcd not found
[   11.697126] audit: type=1130 audit(315532802.620:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-settle co
mm="systemd" exe="/nix/store/iz51mjk3kl0z3bg4khzsxkiri6gjaywj-systemd-246.6/lib/systemd/systemd" hostname=? addr=? terminal=? res=su
ccess'
[   11.944028] ZFS: Loaded module v0.8.6-1, ZFS pool version 5000, ZFS filesystem version 5
[   12.095830] [drm] Cannot find any crtc or sizes
[   12.192372] 8021q: 802.1Q VLAN Support v1.8
[   13.289211] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet]
[   13.311564] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[   13.320108] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[   13.327713] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode


<<< Welcome to NixOS 20.09.2623.97a13fb97fc (aarch64) - ttyS2 >>>
The "nixos" and "root" accounts have empty passwords.

An ssh daemon is running. You then must set a password
for either "root" or "nixos" with `passwd` or add an ssh key
to /home/nixos/.ssh/authorized_keys be able to login.


Run 'nixos-help' for the NixOS manual.

nixos login: nixos (automatic login)


[nixos@nixos:~]$