gistfile1.txt

$0=5.33 (x, step/mm)
$1=157.48 (y, step/mm)
$2=157.48 (z, step/mm)
$3=6000.00 (x v_max, mm/min)
$4=2000.00 (y v_max, mm/min)
$5=5000.00 (z v_max, mm/min)
$6=250.00 (x accel, mm/sec^2)
$7=1.00 (y accel, mm/sec^2)
$8=100.00 (z accel, mm/sec^2)
$9=600.00 (x max travel, mm)
$10=600.00 (y max travel, mm)
$11=200.00 (z max travel, mm)
$12=45 (step pulse, usec)
$13=5000.00 (default feed, mm/min)
$14=142 (step port invert mask, int:10001110)
$15=255 (step idle delay, msec)
$16=0.05 (junction deviation, mm)
$17=0.01 (arc tolerance, mm)
$18=2 (n-decimals, int)
$19=0 (report inches, bool)
$20=1 (auto start, bool)
$21=0 (invert step enable, bool)
$22=0 (soft limits, bool)
$23=0 (hard limits, bool)
$24=1 (homing cycle, bool)
$25=96 (homing dir invert mask, int:01100000)
$26=700.00 (homing feed, mm/min)
$27=600.00 (homing seek, mm/min)
$28=100 (homing debounce, msec)
$29=1.00 (homing pull-off, mm)