Skip to content

Instantly share code, notes, and snippets.

@tmuka
Forked from TheRemote/measurepi.sh
Last active September 18, 2023 13:27
Show Gist options
  • Save tmuka/3b1c74934e67dd046df6f43aa25711ce to your computer and use it in GitHub Desktop.
Save tmuka/3b1c74934e67dd046df6f43aa25711ce to your computer and use it in GitHub Desktop.
Measure Raspberry Pi CPU / GPU / Core / SD clock speeds and check whether you are undervolted
#!/bin/bash
# This bash script outputs the status of your Pi and checks whether you are being throttled for undervoltage and gives you your temperature
# Article and discussion at https://jamesachambers.com/measure-raspberry-pi-undervoltage-true-clock-speeds/
# Author James A Chambers 6-6-17
# updated throttle reason codes by tmuka 2021-10
# Output current configuration
vcgencmd get_config int | egrep "(arm|core|gpu|sdram)_freq|over_volt"
# Measure clock speeds
# for src in arm core h264 isp v3d; do echo -e "$src:\t$(vcgencmd measure_clock $src)"; done
# output human readable cpu speeds in GHz if you want raw data, use the previous line instead.
for src in arm core h264 isp v3d; do echo -e "$src:\t$(vcgencmd measure_clock $src | awk ' BEGIN { FS="=" } ; { printf("%.1fGHz\n", $2 / 1000000000) } ')"; done
# Measure Volts
for id in core sdram_c sdram_i sdram_p ; do echo -e "$id:\t$(vcgencmd measure_volts $id)"; done
# Measure Temperature
vcgencmd measure_temp
# See if we are being throttled
throttled="$(vcgencmd get_throttled)"
echo -e "$throttled"
if [[ $throttled != "throttled=0" ]]; then
# echo "WARNING: You are/have been throttled."
# updated warnings details based on https://raspberrypi.stackexchange.com/a/91433
# https://forum.libreelec.tv/thread/17860-how-to-interpret-rpi-vcgencmd-get-throttled/
# NOTE: The script is slightly out of date as bits 3 and 19 have now been added since the page was published. So
# 0x0 means nothing wrong
# 0x50000 means throttled has occurred since the last reboot.
# 0x50005 means you are currently under-voltage and throttled.
#
# Bit Hex value Meaning
# 0 1 Under-voltage detected
# 1 2 Arm frequency capped
# 2 4 Currently throttled
# 3 8 Soft temperature limit active
# 16 10000 Under-voltage has occurred
# 17 20000 Arm frequency capping has occurred
# 18 40000 Throttling has occurred
# 19 80000 Soft temperature limit has occurred
case $throttled in
"throttled=0x0")
echo "0x0 nothing wrong"
;;
"throttled=0x50000")
echo "0x50000 throttling occurred since last reboot"
;;
"throttled=0x50005")
echo "0x50005 currently under voltage and throttled."
;;
"throttled=0x1")
echo "0 1 Under-voltage detected"
;;
"throttled=0x2")
echo "1 2 Arm frequency capped"
;;
"throttled=0x4")
echo "2 4 Currently throttled"
;;
"throttled=0x8")
echo "3 8 Soft temperature limit active";
;;
"throttled=0x10000")
echo "16 10000 Under-voltage has occurred"
;;
"throttled=0x20000")
echo "17 20000 Arm frequency capping has occurred"
;;
"throttled=0x40000")
echo "18 40000 Throttling has occurred"
;;
"throttled=0x80000")
echo "19 80000 Soft temperature limit has occurred"
;;
esac
fi
@tmuka
Copy link
Author

tmuka commented Nov 4, 2021

@Benik3
Copy link

Benik3 commented Feb 15, 2022

Hello.
Nice script, but I got error on line 24, because there are double brackets. After change to single bracket it's OK.

Also shouldn't be the result determined by bit mask, not only by comparison?

@tmuka
Copy link
Author

tmuka commented Feb 15, 2022

Hi @Benik3 the double brackets worked okay for me in Bash, maybe you're running a different shell? Yes, a bitmask would be better to detect when more than one of the conditions has occurred. I'd welcome your input on how to achieve that.

@Benik3
Copy link

Benik3 commented Feb 15, 2022

I'm running RPi Zero 2 W with latest Raspbian lite. I was connected with putty and run the bash simply by sh measurepi.sh
Maybe I will look on the bit mask, I'm new in RPi and bash, so I'm learning it just now :)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment