Create a gist now

Instantly share code, notes, and snippets.

What would you like to do?
smartctl -a on an HDD and SSD
atobey@brak ~ $ sudo smartctl -a /dev/sda
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.0.1-1-ARCH] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: SEAGATE
Product: ST9500430SS
Revision: DS04
User Capacity: 500,107,862,016 bytes [500 GB]
Logical block size: 512 bytes
Rotation Rate: 7200 rpm
Logical Unit id: 0x5000c5000d7ff53f
Serial number: 9SP12V6G
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Tue Jul 7 12:58:48 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 32 C
Drive Trip Temperature: 68 C
Manufactured in week 36 of year 2009
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 55
Specified load-unload count over device lifetime: 300000
Accumulated load-unload cycles: 55
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 1337417496
Blocks received from initiator = 3746608336
Blocks read from cache and sent to initiator = 2223541943
Number of read and write commands whose size <= segment size = 806299735
Number of read and write commands whose size > segment size = 1323
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 32334.25
number of minutes until next internal SMART test = 54
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 676665596 6 0 676665602 676665602 24807.032 0
write: 0 0 0 0 0 85607.304 0
verify: 128270 0 0 128270 128270 15.442 0
Non-medium error count: 3
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background long Completed 16 2 - [- - -]
# 2 Background short Completed 16 0 - [- - -]
Long (extended) Self Test duration: 6420 seconds [107.0 minutes]
atobey@brak ~ $ sudo smartctl -a /dev/sdc
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.0.1-1-ARCH] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 PRO Series
Serial Number: S1ANNSADB05219A
LU WWN Device Id: 5 002538 5a012e8d5
Firmware Version: DXM05B0Q
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 7 12:59:30 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65476) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 15) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 10021
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 329
177 Wear_Leveling_Count 0x0013 097 097 000 Pre-fail Always - 105
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 073 053 000 Old_age Always - 27
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 315
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 7280358032
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
atobey@brak ~ $
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment