Skip to content

Instantly share code, notes, and snippets.

@toke
Last active July 16, 2024 05:39
Show Gist options
  • Save toke/d99073d89af2b8544be4e1af698f012f to your computer and use it in GitHub Desktop.
Save toke/d99073d89af2b8544be4e1af698f012f to your computer and use it in GitHub Desktop.
Prusa Slicer config. PLA, 0,8mm Nozzle Artillery Sidewinder
# generated by PrusaSlicer 2.1.1 on 2020-04-07 at 19:06:22 UTC
avoid_crossing_perimeters = 1
bed_custom_model =
bed_custom_texture =
bed_shape = 0x0,300x0,300x300,0x300
bed_temperature = 55
before_layer_gcode =
between_objects_gcode =
bottom_fill_pattern = rectilinear
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_angle = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 50
brim_width = 0
clip_multipart_objects = 0
colorprint_heights =
complete_objects = 0
cooling = 1
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_acceleration = 0
default_filament_profile = ""
default_print_profile =
deretract_speed = 0
disable_fan_first_layers = 3
dont_support_bridges = 1
duplicate_distance = 6
elefant_foot_compensation = 0
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
end_gcode = G1 E-10 F9000\nM104 S0 T0 ; turn off temperature\nM140 S0 ; turn off bed\nG1 X300 Y300 F10000\nM84 ; disable motors
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 1
external_perimeter_speed = 150
external_perimeters_first = 0
extra_loading_move = -2
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_colour = ""
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0.87
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 30
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 17
filament_minimal_purge_on_wipe_tower = 15
filament_notes = "## 4.4.2020\n\n * 17mm³/s Volumetic added"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = "PLA 17mm3 FAN30-100"
filament_soluble = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_wipe = nil
fill_angle = 45
fill_density = 0%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_bed_temperature = 80
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 40
first_layer_temperature = 230
gap_fill_speed = 0
gcode_comments = 0
gcode_flavor = marlin
gcode_label_objects = 0
high_current_on_filament_swap = 0
host_type = octoprint
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 150
interface_shells = 0
layer_gcode =
layer_height = 0.3
machine_max_acceleration_e = 10000,5000
machine_max_acceleration_extruding = 1500,1250
machine_max_acceleration_retracting = 1500,1250
machine_max_acceleration_x = 9000,1000
machine_max_acceleration_y = 9000,1000
machine_max_acceleration_z = 500,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 500,200
machine_max_feedrate_y = 500,200
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 10,10
machine_max_jerk_y = 10,10
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_fan_speed = 100
max_layer_height = 0
max_print_height = 400
max_print_speed = 150
max_volumetric_speed = 17
min_fan_speed = 35
min_layer_height = 0.07
min_print_speed = 10
min_skirt_length = 30
notes =
nozzle_diameter = 0.8
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]_E[first_layer_temperature_0]_L[layer_height]_F[fill_density].gcode
overhangs = 1
parking_pos_retraction = 92
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.87
perimeter_speed = 150
perimeters = 2
post_process =
print_settings_id = PLA yschroeder MAX MK4
printer_model =
printer_notes = # 06.04.2020\n\n * Max Print Height: 400mm\n * Removed Stealth Mode\n * New Start Code with wipe\n Source: https://drucktipps3d.de/forum/topic/nozzle-swipe-pruge-line-gcode-fuer-sidewinder-x1/\n\n\n## 03.04.2020\n\n * Nozzle: 0,8mm\n * Feed Rate und ACC-Limit erstmal wieder auskommentiert\n\n
printer_settings_id = SIDEWINDER_MOD 0.8mm
printer_technology = FFF
printer_variant =
printer_vendor =
printhost_cafile =
raft_layers = 0
remaining_times = 0
resolution = 0
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 2
retract_length_toolchange = 10
retract_lift = 0.5
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
seam_position = nearest
serial_port =
serial_speed = 250000
silent_mode = 0
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slowdown_below_layer_time = 7
small_perimeter_speed = 150
solid_infill_below_area = 35
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.55
solid_infill_speed = 150
spiral_vase = 0
standby_temperature_delta = 0
start_filament_gcode = "; Filament gcode\n"
start_gcode = ; Limit Feed rate TK 20200329\n;M203 X200.00 Y200.00 Z20.00 E40.00\n; Limit Accelaration TK 20200329\n;M204 P800.00 R10000.00 T2000.00\n;G28 ; home all axes\n;G1 X50 Y50 Z50 F10000\n\nG28 ; home all axes\nG1 Z5 F3000 ; lift\nG92 E0 ; reset extrusion distance\nG1 X80 Y0 Z0.5 F5000; move to start position\nG1 X100 F300 E12 ; extrude with slow move\nG1 F300 E15 ; extrude without move\nG1 X200 Z0.2 E30 F1000 ; draw prime line\nG1 X230 Z1 F7000 ; quick wipe
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 150
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 1
support_material_xy_spacing = 50%
temperature = 220
thin_walls = 1
threads = 4
thumbnails =
toolchange_gcode =
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0.55
top_solid_infill_speed = 150
top_solid_layers = 5
travel_speed = 250
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
wipe_into_infill = 0
wipe_into_objects = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
wiping_volumes_extruders = 70,70
wiping_volumes_matrix = 0
xy_size_compensation = 0
z_offset = 0
@pleurazoom
Copy link

Love your profile work great!
You think this settings can work whit PETG?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment