Skip to content

Instantly share code, notes, and snippets.

@tomari
Created August 13, 2012 05:41
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save tomari/3337219 to your computer and use it in GitHub Desktop.
Save tomari/3337219 to your computer and use it in GitHub Desktop.
Power Macintosh 8600/200
00:0b.0 Host bridge: Apple Computer Inc. Bandit PowerPC host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
00:0f.0 SCSI storage controller: Artop Electronic Corp ATP860 (rev 01)
Subsystem: Artop Electronic Corp ATP860
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 1500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at 0440
Region 1: I/O ports at 0430
Region 2: I/O ports at 0420
Region 3: I/O ports at 0410
Region 4: I/O ports at 0400
Expansion ROM at 80800000 [disabled]
Capabilities: [58] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:10.0 Class ff00: Apple Computer Inc. Grand Central I/O (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32, Cache Line Size: 32 bytes
Region 0: Memory at f3000000 (32-bit, non-prefetchable)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1 (GENERIC) #0: Sat Nov 6 17:09:11 UTC 2010
builds@b7.netbsd.org:/home/builds/ab/netbsd-5-1-RELEASE/macppc/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/macppc/compile/GENERIC
total memory = 544 MB
avail memory = 516 MB
timecounter: Timecounters tick every 10.000 msec
found Grand Central PIC at f3000000
bootpath: /bandit@F2000000/ACARD,6260@F/disk@0,0/netbsd
mainbus0 (root)
cpu0 at mainbus0: 604e (Revision 2.3), ID 0 (primary)
cpu0: HID0 8000c084<EMCP,ICE,DCE,SGE,BHT>, powersave: 1
cpu0: 200.00 MHz
memory0 at mainbus0
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
acardide0 at pci0 dev 15 function 0
acardide0: Acard ATP860-A Ultra66 IDE Controller (rev. 0x01)
acardide0: bus-master DMA support present
acardide0: primary channel wired to native-PCI mode
acardide0: using irq 25 for native-PCI interrupt
atabus0 at acardide0 channel 0
acardide0: secondary channel wired to native-PCI mode
atabus1 at acardide0 channel 1
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:a0:40:46:34:2c
zsc0 at obio0 irq 15,16
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
cuda0 at obio0 offset 0x16000 irq 18
nadb0 at cuda0: Apple Desktop Bus
iic0 at cuda0: I2C bus
mesh0 at obio0 offset 0x18000 irq 13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
sixty6 at obio0 offset 0x1c000 not configured
nvram0 at obio0 offset 0x1d000
bandit1 at mainbus0
pci1 at bandit1 bus 1
pci1: i/o space, memory space enabled
genfb0 at pci1 dev 11 function 0: Apple Computer Control
no width property
genfb0: bogus parameters, unable to continue
Apple Computer PlanB (undefined subclass 0x00, revision 0x01) at pci1 dev 13 function 0 not configured
biomask 80001fe netmask 80001fe ttymask 80001fe
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 12500000 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <Maxtor 93073U6>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29311 MB, 59554 cyl, 16 head, 63 sec, 512 bytes/sect x 60030432 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(acardide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA)
sd0 at scsibus1 target 0 lun 0: <IBM, DCAS-32160, S63A> disk fixed
sd0: 2063 MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sect x 4226725 sectors
cd0 at scsibus1 target 3 lun 0: <MATSHITA, CD-ROM CR-8012, 1.0f> cdrom removable
sd1 at scsibus1 target 5 lun 0: <IOMEGA, ZIP 100, E.08> disk removable
sd1: drive offline
Kernelized RAIDframe activated
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment