Skip to content

Instantly share code, notes, and snippets.

@tomari

tomari/gist:55a7e3722ceb224a95af

Created December 15, 2014 08:55
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save tomari/55a7e3722ceb224a95af to your computer and use it in GitHub Desktop.
Save tomari/55a7e3722ceb224a95af to your computer and use it in GitHub Desktop.
Download ZIP
Intel AL440LX+Celeron "Covington" Debian/GNU Linux Wheezy system inventory
Raw
gistfile1.txt
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Celeron (Covington)
stepping : 0
microcode : 0x40
cpu MHz : 266.431
cache size : 32 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pse36 mmx fxsr up
bogomips : 532.86
clflush size : 32
cache_alignment : 32
address sizes : 36 bits physical, 32 bits virtual
power management:
-[0000:00]-+-00.0 Intel Corporation 440LX/EX - 82443LX/EX Host bridge [8086:7180]
+-01.0-[01]--
+-07.0 Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110]
+-07.1 Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111]
+-07.2 Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112]
+-07.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
+-0d.0 Advanced Micro Devices [AMD] nee ATI 3D Rage II+ 215GTB [Mach64 GTB] [1002:4755]
\-0f.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229]
/proc/interrupts
CPU0
0: 18722 XT-PIC-XT-PIC timer
1: 8 XT-PIC-XT-PIC i8042
2: 0 XT-PIC-XT-PIC cascade
5: 2 XT-PIC-XT-PIC OPL3-SA2
6: 3 XT-PIC-XT-PIC floppy
7: 1 XT-PIC-XT-PIC parport0
8: 0 XT-PIC-XT-PIC rtc0
9: 0 XT-PIC-XT-PIC acpi, uhci_hcd:usb1
11: 2315 XT-PIC-XT-PIC eth0
14: 1882 XT-PIC-XT-PIC ata_piix
15: 0 XT-PIC-XT-PIC ata_piix
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 0
MIS: 0
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:07.1
0170-0177 : ata_piix
01f0-01f7 : 0000:00:07.1
01f0-01f7 : ata_piix
0213-0213 : ISAPnP
02f8-02ff : serial
0330-0331 : MPU401 UART
0370-0371 : OPL3-SA control
0376-0376 : 0000:00:07.1
0376-0376 : ata_piix
0378-037a : parport0
037b-037f : parport0
0388-0389 : OPL2/3 (left)
038a-038b : OPL2/3 (right)
03c0-03df : vga+
03f2-03f2 : floppy
03f4-03f5 : floppy
03f6-03f6 : 0000:00:07.1
03f6-03f6 : ata_piix
03f7-03f7 : floppy
03f8-03ff : serial
0534-0537 : WSS
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
1000-103f : 0000:00:0f.0
1000-103f : e100
1040-104f : 0000:00:07.1
1040-104f : ata_piix
1060-107f : 0000:00:07.2
1060-107f : uhci_hcd
1400-14ff : 0000:00:0d.0
7000-700f : 0000:00:07.3
7000-700f : pnp 00:07
7000-7007 : piix4_smbus
8000-803f : 0000:00:07.3
8000-803f : pnp 00:07
8000-8003 : ACPI PM1a_EVT_BLK
8004-8005 : ACPI PM1a_CNT_BLK
8008-800b : ACPI PM_TMR
800c-800f : ACPI GPE0_BLK
8010-8015 : ACPI CPU throttle
/proc/asound/cards
0 [OPL3SA3 ]: OPL3SA2 - Yamaha OPL3-SA3
Yamaha OPL3-SA3 at 0x370, irq 5, dma 0&1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2+deb7u2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable)
[ 0.000000] BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data)
[ 0.000000] BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000018000000 (usable)
[ 0.000000] BIOS-e820: 00000000fffe7400 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.1 present.
[ 0.000000] DMI: /AL440LX, BIOS 4A4LL0X0.86A.0031.P14 04/16/99
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x18000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000018000000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0018000000 page 2M
[ 0.000000] kernel direct mapping tables up to 18000000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 1763c000 - 17ffc000
[ 0.000000] ACPI: RSDP 000f6e90 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 040fdc09 00028 (v01 PTLTD RSDT 00000000 PTL 01000000)
[ 0.000000] ACPI: FACP 040ff78c 00074 (v01 INTEL ATLANTA 19990416 PTL 000F4240)
[ 0.000000] ACPI: DSDT 040fdc31 01B5B (v01 Intel Atlant 00000000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 040ffbc0 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 384MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 18000000
[ 0.000000] low ram: 0 - 18000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00018000
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000040fd
[ 0.000000] 0: 0x00004100 -> 0x00018000
[ 0.000000] On node 0 totalpages: 98188
[ 0.000000] free_area_init_node: node 0, pgdat c1412800, node_mem_map d733c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 93469 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000040fd000 - 00000000040fe000
[ 0.000000] PM: Registered nosave memory: 00000000040fe000 - 00000000040ff000
[ 0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000
[ 0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e7fe7400)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @d732d000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97420
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=25323b3a-f426-4b3d-a0c3-06bd42d31f95 ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 373980k/393216k available (2858k kernel code, 18772k reserved, 1342k data, 420k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xd8800000 - 0xff9fe000 ( 625 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 0.000000] .init : 0xc141b000 - 0xc1484000 ( 420 kB)
[ 0.000000] .data : 0xc12ca980 - 0xc141a200 (1342 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12ca980 (2858 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d6c06000 soft=d6c08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 266.431 MHz processor.
[ 0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 532.86 BogoMIPS (lpj=1065724)
[ 0.004066] pid_max: default: 32768 minimum: 301
[ 0.004565] Security Framework initialized
[ 0.004628] AppArmor: AppArmor disabled by boot time parameter
[ 0.004847] Mount-cache hash table entries: 512
[ 0.006304] Initializing cgroup subsys cpuacct
[ 0.006380] Initializing cgroup subsys memory
[ 0.006479] Initializing cgroup subsys devices
[ 0.006508] Initializing cgroup subsys freezer
[ 0.006532] Initializing cgroup subsys net_cls
[ 0.006555] Initializing cgroup subsys blkio
[ 0.006634] Initializing cgroup subsys perf_event
[ 0.008081] mce: CPU supports 5 MCE banks
[ 0.008265] SMP alternatives: switching to UP code
[ 0.025519] Freeing SMP alternatives: 8k freed
[ 0.025602] ACPI: Core revision 20110623
[ 0.034066] ACPI: setting ELCR to 0200 (from 0a00)
[ 0.036211] weird, boot CPU (#0) not listed by the BIOS.
[ 0.036241] SMP motherboard not detected.
[ 0.036261] Local APIC not detected. Using dummy APIC emulation.
[ 0.036280] SMP disabled
[ 0.036298] Performance Events:
[ 0.036318] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.036339] no hardware sampling interrupt available.
[ 0.036363] p6 PMU driver.
[ 0.036393] ... version: 0
[ 0.036413] ... bit width: 32
[ 0.036431] ... generic registers: 2
[ 0.036450] ... value mask: 00000000ffffffff
[ 0.036471] ... max period: 000000007fffffff
[ 0.036490] ... fixed-purpose events: 0
[ 0.036508] ... event mask: 0000000000000003
[ 0.039669] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[ 0.040236] Brought up 1 CPUs
[ 0.040268] Total of 1 processors activated (532.86 BogoMIPS).
[ 0.042700] devtmpfs: initialized
[ 0.045194] PM: Registering ACPI NVS region at 40ff800 (1024 bytes)
[ 0.047295] print_constraints: dummy:
[ 0.048281] NET: Registered protocol family 16
[ 0.049800] ACPI: bus type pci registered
[ 0.065403] PCI: PCI BIOS revision 2.10 entry at 0xfd9c4, last bus=1
[ 0.065435] PCI: Using configuration type 1 for base access
[ 0.076288] bio: create slab <bio-0> at 0
[ 0.077691] ACPI: Added _OSI(Module Device)
[ 0.077729] ACPI: Added _OSI(Processor Device)
[ 0.077755] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.077782] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080324] ACPI: EC: Look up EC in DSDT
[ 0.090983] ACPI: Interpreter enabled
[ 0.091076] ACPI: (supports S0 S1 S5)
[ 0.091278] ACPI: Using PIC for interrupt routing
[ 0.121877] ACPI: No dock devices found.
[ 0.121913] HEST: Table not found.
[ 0.121962] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.132549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.153375] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.153425] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.153465] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.153504] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000dffff] (ignored)
[ 0.153542] pci_root PNP0A03:00: host bridge window [mem 0x18000000-0xffdfffff] (ignored)
[ 0.153649] pci 0000:00:00.0: [8086:7180] type 0 class 0x000600
[ 0.153715] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
[ 0.153993] pci 0000:00:01.0: [8086:7181] type 1 class 0x000604
[ 0.154207] pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
[ 0.154490] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
[ 0.154626] pci 0000:00:07.1: reg 20: [io 0x1040-0x104f]
[ 0.154799] pci 0000:00:07.2: [8086:7112] type 0 class 0x000c03
[ 0.154934] pci 0000:00:07.2: reg 20: [io 0x1060-0x107f]
[ 0.155126] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
[ 0.155164] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.155179] * this clock source is slow. Consider trying other clock sources
[ 0.155374] pci 0000:00:07.3: quirk: [io 0x8000-0x803f] claimed by PIIX4 ACPI
[ 0.155418] pci 0000:00:07.3: quirk: [io 0x7000-0x700f] claimed by PIIX4 SMB
[ 0.155576] pci 0000:00:0d.0: [1002:4755] type 0 class 0x000300
[ 0.155647] pci 0000:00:0d.0: reg 10: [mem 0xf5000000-0xf5ffffff]
[ 0.155699] pci 0000:00:0d.0: reg 14: [io 0x1400-0x14ff]
[ 0.155750] pci 0000:00:0d.0: reg 18: [mem 0xf4101000-0xf4101fff]
[ 0.155851] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.156156] pci 0000:00:0f.0: [8086:1229] type 0 class 0x000200
[ 0.156241] pci 0000:00:0f.0: reg 10: [mem 0xf4100000-0xf4100fff]
[ 0.156292] pci 0000:00:0f.0: reg 14: [io 0x1000-0x103f]
[ 0.156341] pci 0000:00:0f.0: reg 18: [mem 0xf4000000-0xf40fffff]
[ 0.156437] pci 0000:00:0f.0: reg 30: [mem 0x00000000-0x000fffff pref]
[ 0.156546] pci 0000:00:0f.0: supports D1 D2
[ 0.156579] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot
[ 0.156845] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.156926] pci_bus 0000:00: on NUMA node 0
[ 0.156992] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.158243] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.165590] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.166779] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.168096] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.169308] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.171027] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171079] vgaarb: loaded
[ 0.171101] vgaarb: bridge control possible 0000:00:0d.0
[ 0.171778] PCI: Using ACPI for IRQ routing
[ 0.171823] PCI: pci_cache_line_size set to 32 bytes
[ 0.172207] Expanded resource reserved due to conflict with Adapter ROM
[ 0.172250] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.172283] reserve RAM buffer: 00000000040fdc00 - 0000000007ffffff
[ 0.173810] Switching to clocksource pit
[ 0.195306] pnp: PnP ACPI init
[ 0.195531] ACPI: bus type pnp registered
[ 0.205777] pnp 00:00: [bus 00-ff]
[ 0.205825] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.205861] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.205895] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.205931] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.205964] pnp 00:00: [mem 0x000cc000-0x000dffff window]
[ 0.205997] pnp 00:00: [mem 0x18000000-0xffdfffff window]
[ 0.206620] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.208231] pnp 00:01: [io 0x0060]
[ 0.208272] pnp 00:01: [io 0x0064]
[ 0.208311] pnp 00:01: [irq 1]
[ 0.208751] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.209148] pnp 00:02: [irq 12]
[ 0.209632] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.210018] pnp 00:03: [io 0x0000-0x000f]
[ 0.210221] pnp 00:03: [io 0x0080-0x0091]
[ 0.210262] pnp 00:03: [io 0x0094-0x009f]
[ 0.210292] pnp 00:03: [io 0x00c0-0x00df]
[ 0.210352] pnp 00:03: [io 0x040b]
[ 0.210386] pnp 00:03: [io 0x0410-0x043f]
[ 0.210415] pnp 00:03: [io 0x0481-0x0483]
[ 0.210443] pnp 00:03: [io 0x0487]
[ 0.210471] pnp 00:03: [io 0x0489]
[ 0.210498] pnp 00:03: [io 0x04d6]
[ 0.210528] pnp 00:03: [dma 4]
[ 0.210990] pnp 00:03: Plug and Play ACPI device, IDs PNP0201 (active)
[ 0.211359] pnp 00:04: [io 0x0070-0x0071]
[ 0.211408] pnp 00:04: [irq 8]
[ 0.211917] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.212420] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.212471] pnp 00:05: [irq 13]
[ 0.212941] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.213435] pnp 00:06: [io 0x0061]
[ 0.213912] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.214442] pnp 00:07: [io 0x7000-0x700f]
[ 0.214486] pnp 00:07: [io 0x8000-0x803f]
[ 0.215144] system 00:07: [io 0x7000-0x700f] has been reserved
[ 0.215193] system 00:07: [io 0x8000-0x803f] has been reserved
[ 0.215253] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216027] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.216070] pnp 00:08: [io 0x03f7]
[ 0.216108] pnp 00:08: [irq 6]
[ 0.216138] pnp 00:08: [dma 2]
[ 0.217011] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.219070] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.219120] pnp 00:09: [irq 4]
[ 0.220272] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.223598] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.225220] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (disabled)
[ 0.225318] pnp: PnP ACPI: found 12 devices
[ 0.225345] ACPI: ACPI bus type pnp unregistered
[ 0.225379] PnPBIOS: Disabled by ACPI PNP
[ 0.307002] Switching to clocksource acpi_pm
[ 0.307213] PCI: max bus depth: 1 pci_try_num: 2
[ 0.307351] pci 0000:00:0f.0: BAR 6: assigned [mem 0x18000000-0x180fffff pref]
[ 0.307404] pci 0000:00:0d.0: BAR 6: assigned [mem 0x18100000-0x1811ffff pref]
[ 0.307443] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.307545] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.307583] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.308118] NET: Registered protocol family 2
[ 0.332654] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.335488] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.336899] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.338152] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.338179] TCP reno registered
[ 0.338223] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.338337] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.339384] NET: Registered protocol family 1
[ 0.339548] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.339685] pci 0000:00:07.2: enabling device (0004 -> 0005)
[ 0.341544] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.341581] PCI: setting IRQ 9 as level-triggered
[ 0.341730] pci 0000:00:0d.0: Boot video device
[ 0.341848] pci 0000:00:0f.0: Firmware left e100 interrupts enabled; disabling
[ 0.341919] PCI: CLS 32 bytes, default 32
[ 0.342634] Unpacking initramfs...
[ 3.878239] Freeing initrd memory: 9984k freed
[ 3.952735] audit: initializing netlink socket (disabled)
[ 3.952877] type=2000 audit(1418633135.951:1): initialized
[ 4.082919] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.087604] VFS: Disk quotas dquot_6.5.2
[ 4.088202] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.089156] msgmni has been set to 749
[ 4.091853] alg: No test for stdrng (krng)
[ 4.092522] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.092561] io scheduler noop registered
[ 4.092583] io scheduler deadline registered
[ 4.092786] io scheduler cfq registered (default)
[ 4.093932] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.094271] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.094306] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 4.096207] intel_idle: does not run on family 6 model 5
[ 4.096683] ERST: Table is not found!
[ 4.096711] GHES: HEST is not enabled!
[ 4.096910] isapnp: Scanning for PnP cards...
[ 4.193608] 01:01: card 'OPL3-SA3 Snd System'
[ 4.193643] isapnp: 1 Plug & Play card detected total
[ 4.194521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.215606] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.241126] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.242109] serial 00:0b: [io 0x02f8-0x02ff]
[ 4.242324] serial 00:0b: [irq 3]
[ 4.246624] serial 00:0b: activated
[ 4.267943] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 4.270465] Linux agpgart interface v0.103
[ 4.271807] agpgart-intel 0000:00:00.0: Intel 440LX Chipset
[ 4.282329] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 4.284490] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MICE] at 0x60,0x64 irq 1,12
[ 4.536640] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.538534] mousedev: PS/2 mouse device common for all mice
[ 4.540274] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.540402] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 4.540647] cpuidle: using governor ladder
[ 4.540679] cpuidle: using governor menu
[ 4.543632] TCP cubic registered
[ 4.544647] NET: Registered protocol family 10
[ 4.552382] Mobile IPv6
[ 4.552429] NET: Registered protocol family 17
[ 4.552531] Registering the dns_resolver key type
[ 4.552753] Using IPI No-Shortcut mode
[ 4.554783] PM: Hibernation image not present or could not be loaded.
[ 4.554944] registered taskstats version 1
[ 4.555932] rtc_cmos 00:04: setting system clock to 2014-12-15 08:45:37 UTC (1418633137)
[ 4.556729] Initializing network drop monitor service
[ 4.557955] Freeing unused kernel memory: 420k freed
[ 4.562318] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.562935] Write protecting the kernel text: 2860k
[ 4.563269] Write protecting the kernel read-only data: 1084k
[ 4.759658] udevd[43]: starting version 175
[ 4.948317] Refined TSC clocksource calibration: 266.442 MHz.
[ 4.948372] Switching to clocksource tsc
[ 5.451823] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 5.451859] e100: Copyright(c) 1999-2006 Intel Corporation
[ 5.502041] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 5.502080] PCI: setting IRQ 11 as level-triggered
[ 5.857325] SCSI subsystem initialized
[ 5.891826] usbcore: registered new interface driver usbfs
[ 5.924019] ACPI: Fan [FAN] (on)
[ 5.930956] e100 0000:00:0f.0: eth0: addr 0xf4100000, irq 11, MAC addr 00:d0:b7:22:15:d2
[ 5.944475] usbcore: registered new interface driver hub
[ 5.958206] usbcore: registered new device driver usb
[ 5.995384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.072372] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.072813] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 6.073202] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 6.073371] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001060
[ 6.073808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.073850] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.073880] usb usb1: Product: UHCI Host Controller
[ 6.073907] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 6.073934] usb usb1: SerialNumber: 0000:00:07.2
[ 6.085502] hub 1-0:1.0: USB hub found
[ 6.085595] hub 1-0:1.0: 2 ports detected
[ 6.100937] Floppy drive(s): fd0 is 1.44M
[ 6.119831] FDC 0 is a National Semiconductor PC87306
[ 6.216696] libata version 3.00 loaded.
[ 6.240879] ata_piix 0000:00:07.1: version 2.13
[ 6.275774] scsi0 : ata_piix
[ 6.282505] scsi1 : ata_piix
[ 6.283316] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1040 irq 14
[ 6.283360] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1048 irq 15
[ 6.292543] ata2: port disabled--ignoring
[ 6.453051] ata1.00: HPA detected: current 117229295, native 117231408
[ 6.453107] ata1.00: ATA-6: ST360020A, 3.39, max UDMA/100
[ 6.453140] ata1.00: 117229295 sectors, multi 16: LBA
[ 6.469001] ata1.00: configured for UDMA/33
[ 6.470646] scsi 0:0:0:0: Direct-Access ATA ST360020A 3.39 PQ: 0 ANSI: 5
[ 7.075784] sd 0:0:0:0: [sda] 117229295 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 7.077735] sd 0:0:0:0: [sda] Write Protect is off
[ 7.077780] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.078488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.137007] sda: sda1 sda2 < sda5 >
[ 7.146407] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.179274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.164478] microcode: CPU0 sig=0x650, pf=0x1, revision=0x32
[ 8.226965] platform microcode: firmware: agent loaded intel-ucode/06-05-00 into memory
[ 8.227589] microcode: CPU0 updated to revision 0x40, date = 1999-05-25
[ 8.230596] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.427864] PM: Starting manual resume from disk
[ 8.427907] PM: Hibernation image partition 8:5 present
[ 8.427927] PM: Looking for hibernation image.
[ 8.429451] PM: Image not found (code -22)
[ 8.429480] PM: Hibernation image not present or could not be loaded.
[ 8.726340] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.586304] udevd[284]: starting version 175
[ 14.685489] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.695481] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 14.695544] ACPI: Power Button [PWRF]
[ 14.740761] Marking TSC unstable due to TSC halts in idle
[ 14.740884] ACPI: acpi_idle registered with cpuidle
[ 14.756435] Switching to clocksource acpi_pm
[ 15.585836] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x7000, revision 0
[ 15.698904] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 15.893338] parport_pc 00:0a: [io 0x0378-0x037f]
[ 15.893405] parport_pc 00:0a: [io 0x0778-0x077f]
[ 15.893606] parport_pc 00:0a: [irq 7]
[ 15.893658] parport_pc 00:0a: [dma 3]
[ 15.960010] parport_pc 00:0a: activated
[ 15.960265] parport_pc 00:0a: reported by Plug and Play ACPI
[ 15.996396] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 16.611451] Error: Driver 'pcspkr' is already registered, aborting...
[ 21.062622] Adding 783356k swap on /dev/sda5. Priority:-1 extents:1 across:783356k
[ 21.293245] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 22.227579] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.799284] loop: module loaded
[ 23.456917] snd-opl3sa2-pnpbios 01:01.00: [io 0x0220-0x022f]
[ 23.456989] snd-opl3sa2-pnpbios 01:01.00: [io 0x0530-0x0537]
[ 23.457045] snd-opl3sa2-pnpbios 01:01.00: [io 0x0388-0x038f]
[ 23.457100] snd-opl3sa2-pnpbios 01:01.00: [io 0x0330-0x0331]
[ 23.457154] snd-opl3sa2-pnpbios 01:01.00: [io 0x0370-0x0371]
[ 23.457360] snd-opl3sa2-pnpbios 01:01.00: [irq 5]
[ 23.457415] snd-opl3sa2-pnpbios 01:01.00: [dma 0]
[ 23.457460] snd-opl3sa2-pnpbios 01:01.00: [dma 1]
[ 23.459923] snd-opl3sa2-pnpbios 01:01.00: activated
[ 23.462345] snd-opl3sa2-pnpbios 01:01.00: disabled
[ 23.477299] snd-opl3sa2-pnpbios: probe of 01:01.00 failed with error -2
[ 23.477835] snd-opl3sa2-cpnp 01:01.00: [io 0x0220-0x022f]
[ 23.477904] snd-opl3sa2-cpnp 01:01.00: [io 0x0530-0x0537]
[ 23.477959] snd-opl3sa2-cpnp 01:01.00: [io 0x0388-0x038f]
[ 23.478013] snd-opl3sa2-cpnp 01:01.00: [io 0x0330-0x0331]
[ 23.478065] snd-opl3sa2-cpnp 01:01.00: [io 0x0370-0x0371]
[ 23.478304] snd-opl3sa2-cpnp 01:01.00: [irq 5]
[ 23.478357] snd-opl3sa2-cpnp 01:01.00: [dma 0]
[ 23.478401] snd-opl3sa2-cpnp 01:01.00: [dma 1]
[ 23.481079] snd-opl3sa2-cpnp 01:01.00: activated
[ 36.969120] e100 0000:00:0f.0: firmware: agent loaded e100/d101m_ucode.bin into memory
[ 36.985084] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.988487] e100 0000:00:0f.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 36.995224] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.658709] RPC: Registered named UNIX socket transport module.
[ 37.658746] RPC: Registered udp transport module.
[ 37.658767] RPC: Registered tcp transport module.
[ 37.658788] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 37.761335] eth0: IPv6 duplicate address fe80::2d0:b7ff:fe22:15d2 detected!
[ 37.798634] FS-Cache: Loaded
[ 37.994163] FS-Cache: Netfs 'nfs' registered for caching
[ 38.084841] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment