Skip to content

Instantly share code, notes, and snippets.

@tomari

tomari/op320.txt

Created July 31, 2015 08:54
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save tomari/6743f36befe5a5900a25 to your computer and use it in GitHub Desktop.
Save tomari/6743f36befe5a5900a25 to your computer and use it in GitHub Desktop.
Download ZIP
Dell OptiPlex 320
Raw
op320.txt
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 6
model name : Intel(R) Pentium(R) D CPU 3.40GHz
stepping : 5
microcode : 0x7
cpu MHz : 2400.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm
bogomips : 6800.17
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 6
model name : Intel(R) Pentium(R) D CPU 3.40GHz
stepping : 5
microcode : 0x7
cpu MHz : 2400.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm
bogomips : 6800.17
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
-[0000:00]-+-00.0 Advanced Micro Devices, Inc. [AMD/ATI] RS400 Host Bridge [1002:5a33]
+-01.0-[01]----05.0 Advanced Micro Devices, Inc. [AMD/ATI] RC410 [Radeon Xpress 200/1100] [1002:5a61]
+-12.0 Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA [1002:4380]
+-13.0 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0) [1002:4387]
+-13.1 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1) [1002:4388]
+-13.2 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2) [1002:4389]
+-13.3 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3) [1002:438a]
+-13.4 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4) [1002:438b]
+-13.5 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI) [1002:4386]
+-14.0 Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385]
+-14.1 Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE [1002:438c]
+-14.2 Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
+-14.3 Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge [1002:438d]
\-14.4-[02]----09.0 Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c]
/proc/interrupts
CPU0 CPU1
0: 181 0 IO-APIC-edge timer
1: 3 0 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 5 0 IO-APIC-edge i8042
14: 759 0 IO-APIC-edge pata_atiixp
15: 0 0 IO-APIC-edge pata_atiixp
16: 309 0 IO-APIC-fasteoi ohci_hcd:usb2, snd_hda_intel
17: 424 0 IO-APIC-fasteoi ohci_hcd:usb3, ohci_hcd:usb5, radeon
18: 0 0 IO-APIC-fasteoi ohci_hcd:usb4, ohci_hcd:usb6
19: 2 0 IO-APIC-fasteoi ehci_hcd:usb1
21: 1993723 0 IO-APIC-fasteoi eth0
23: 3696 35958 IO-APIC-fasteoi ahci
NMI: 12 5 Non-maskable interrupts
LOC: 119394 82857 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 12 5 Performance monitoring interrupts
IWI: 8407 4995 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 28668 167437 Rescheduling interrupts
CAL: 8450 2581 Function call interrupts
TLB: 2654 7800 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 3 3 Machine check polls
ERR: 0
MIS: 0
/proc/ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-007f : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:14.1
0170-0177 : pata_atiixp
01f0-01f7 : 0000:00:14.1
01f0-01f7 : pata_atiixp
0228-022f : pnp 00:00
0376-0376 : 0000:00:14.1
0376-0376 : pata_atiixp
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : 0000:00:14.1
03f6-03f6 : pata_atiixp
03f8-03ff : serial
040b-040b : pnp 00:00
04d6-04d6 : pnp 00:00
0800-08fe : pnp 00:00
0900-09fe : pnp 00:00
0b00-0b0f : 0000:00:14.0
0b00-0b07 : piix4_smbus
0b10-0b1f : pnp 00:00
0b10-0b17 : piix4_smbus
0c00-0c01 : pnp 00:00
0c14-0c14 : pnp 00:00
0c50-0c52 : pnp 00:00
0c6c-0c6f : pnp 00:00
0cd0-0cdf : pnp 00:00
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
4000-4003 : ACPI PM1a_EVT_BLK
4004-4005 : ACPI PM1a_CNT_BLK
4008-400b : ACPI PM_TMR
4010-4015 : ACPI CPU throttle
4020-4027 : ACPI GPE0_BLK
4100-411f : pnp 00:00
e000-efff : PCI Bus 0000:01
ec00-ecff : 0000:01:05.0
fe00-fe07 : 0000:00:12.0
fe00-fe07 : ahci
fe10-fe13 : 0000:00:12.0
fe10-fe13 : ahci
fe20-fe27 : 0000:00:12.0
fe20-fe27 : ahci
fe30-fe33 : 0000:00:12.0
fe30-fe33 : ahci
fec0-fecf : 0000:00:12.0
fec0-fecf : ahci
ffa0-ffaf : 0000:00:14.1
ffa0-ffaf : pata_atiixp
# dmidecode 2.12
SMBIOS 2.3 present.
68 structures occupying 2298 bytes.
Table at 0x000F0450.
Handle 0xDA00, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 00 DA B0 00 17 4B 0E 38 00 58 00 58 00 01
00 59 00 59 00 01 00 05 80 05 80 01 00 FF FF 00
00 00 00
Handle 0xDA01, DMI type 218, 35 bytes
OEM-specific Type
Header and Data:
DA 23 01 DA B0 00 17 4B 0E 38 00 10 F5 10 F5 00
00 11 F5 11 F5 00 00 12 F5 12 F5 00 00 FF FF 00
00 00 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: 1.1.12
Release Date: 06/17/2009
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 1.1
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: OptiPlex 320
Version: Not Specified
Serial Number: xxxxxxx
UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
Wake-up Type: APM Timer
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0MH651
Version:
Serial Number: ..xxxxxxxxxxxxxx.
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Tower
Lock: Not Present
Version: Not Specified
Serial Number: xxxxxxx
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: Microprocessor
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 65 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 6, Stepping 5
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Not Specified
Voltage: 1.8 V
External Clock: 800 MHz
Max Speed: 5200 MHz
Current Speed: 3400 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 kB
Maximum Size: 16 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 4096 kB
Maximum Size: 4096 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PARALLEL
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-25 female
Port Type: Parallel Port PS/2
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SERIAL1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0802, DMI type 126, 9 bytes
Inactive
Handle 0x0803, DMI type 126, 9 bytes
Inactive
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0807, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB6
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: ENET
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MIC
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LINE-IN
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0811, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: HP-OUT
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0901, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT1
Type: x16 PCI Express
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 9, 13 bytes
System Slot Information
Designation: SLOT3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0906, DMI type 126, 13 bytes
Inactive
Handle 0x0907, DMI type 126, 13 bytes
Inactive
Handle 0x0908, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: ATI Radeon Xpress 200 graphics
Handle 0x0A02, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: 10/100 Ethernet Controller
Handle 0x0A03, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Intel(R) High Definition Audio Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: www.dell.com
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0F00, DMI type 15, 29 bytes
System Event Log
Area Length: 2049 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0xFFF81000
Status: Valid, Not Full
Change Token: 0x0000000C
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: System limit exceeded
Data Format 2: System management
Descriptor 3: Log area reset/cleared
Data Format 3: None
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Single-bit ECC
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz
Manufacturer: 0000000000000000
Serial Number: FFFFFFFF
Asset Tag: FFFFFF
Part Number: SMD-1G48N2P-6E
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz
Manufacturer: 0000000000000000
Serial Number: FFFFFFFF
Asset Tag: FFFFFF
Part Number: SMD-1G48N2P-6E
Handle 0x1301, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x1000
Partition Width: 1
Handle 0x1400, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x1100
Memory Array Mapped Address Handle: 0x1301
Partition Row Position: 1
Handle 0x1401, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x1101
Memory Array Mapped Address Handle: 0x1301
Partition Row Position: 1
Handle 0x1800, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Enabled
Keyboard Password Status: Not Implemented
Administrator Password Status: Enabled
Front Panel Reset Status: Not Implemented
Handle 0x1900, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: *-* 00:00:00
Handle 0x1B10, DMI type 27, 12 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x0000DD00
Handle 0x1B11, DMI type 126, 12 bytes
Inactive
Handle 0x1B12, DMI type 126, 12 bytes
Inactive
Handle 0x1B13, DMI type 126, 12 bytes
Inactive
Handle 0x1B14, DMI type 126, 12 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 01 03 FE 00 E5 01
Handle 0xD100, DMI type 209, 12 bytes
OEM-specific Type
Header and Data:
D1 0C 00 D1 78 03 07 03 04 0F 80 05
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD201, DMI type 126, 12 bytes
Inactive
Handle 0xD400, DMI type 212, 212 bytes
OEM-specific Type
Header and Data:
D4 D4 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
11 00 25 FC 02 12 00 25 FC 03 00 00 25 F3 00 00
00 25 F3 04 00 00 25 F3 08 00 00 25 F3 0C 07 00
23 8F 00 08 00 23 F3 00 09 00 23 F3 04 0A 00 23
F3 08 0B 00 23 8F 10 0C 00 23 8F 20 0E 00 23 8F
30 0D 00 23 8C 40 A6 00 23 8C 41 A7 00 23 8C 42
05 01 22 FD 02 06 01 22 FD 00 8C 00 22 FE 00 8D
00 22 FE 01 09 01 25 3F 80 A1 00 26 F3 00 A2 00
26 F3 08 A3 00 26 F3 04 9F 00 26 FD 02 A0 00 26
FD 00 9D 00 11 FB 04 9E 00 11 FB 00 5C 00 78 BF
40 5D 00 78 BF 00 04 80 78 F5 0A 01 A0 78 F5 00
93 00 7B 7F 80 94 00 7B 7F 00 03 C0 67 00 05 FF
FF 00 00 00
Handle 0xD401, DMI type 212, 182 bytes
OEM-specific Type
Header and Data:
D4 B6 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 F8
02 2E 00 59 F8 00 6E 00 59 F8 01 28 00 59 3F 00
29 00 59 3F 40 2A 00 59 3F 80 2B 00 5A 00 00 2C
00 5B 00 00 55 00 59 E7 00 6D 00 59 E7 08 8E 00
59 E7 10 8F 00 59 E7 00 00 00 55 FB 04 00 00 55
FB 00 19 00 55 E7 00 1A 00 55 E7 08 1B 00 55 E7
10 23 00 55 7F 00 22 00 55 7F 80 F5 00 58 BF 40
F6 00 58 BF 00 EB 00 55 FE 00 EA 00 55 FE 01 01
01 51 3F 00 02 01 51 3F 40 03 01 51 3F 80 04 01
51 3F C0 40 01 54 EF 00 41 01 54 EF 10 42 01 54
F7 00 43 01 54 F7 08 4C 01 53 7F 00 4D 01 53 7F
80 FF FF 00 00 00
Handle 0xD402, DMI type 212, 77 bytes
OEM-specific Type
Header and Data:
D4 4D 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
01 2E 01 21 FE 00 E2 00 27 7F 00 E3 00 27 7F 80
E4 00 27 BF 00 E5 00 27 BF 40 D1 00 22 7F 80 D2
00 22 7F 00 2B 01 11 7F 80 2C 01 11 7F 00 4E 01
28 DF 00 4F 01 28 DF 20 FF FF 00 00 00
Handle 0xD403, DMI type 212, 117 bytes
OEM-specific Type
Header and Data:
D4 75 03 D4 70 00 71 00 03 40 59 6D 17 01 52 FE
00 18 01 52 FE 01 19 01 52 FB 00 1A 01 52 FB 04
1B 01 52 FD 00 1C 01 52 FD 02 1D 01 52 F7 00 1E
01 52 F7 08 09 40 52 EF 00 08 40 52 EF 10 0B 40
52 DF 00 0A 40 52 DF 20 0D 40 52 BF 00 0C 40 52
BF 40 0F 40 52 7F 00 0E 40 52 7F 80 87 00 59 DF
20 88 00 59 DF 00 E4 01 53 DF 00 E5 01 53 DF 20
FF FF 00 00 00
Handle 0xD800, DMI type 216, 9 bytes
OEM-specific Type
Header and Data:
D8 09 00 D8 01 02 01 F0 03
Strings:
ATI RADEON XPRESS 200 Series
008.050I.024.000
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 01 00 00 00 10 F5 00 00 00 00 00
00 00 00
Handle 0xDD01, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 01 DD 00 01 00 00 00 11 F5 00 00 00 00 00
00 00 00
Handle 0xDD02, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 02 DD 00 01 00 00 00 12 F5 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 13 bytes
OEM-specific Type
Header and Data:
DE 0D 00 DE C1 01 FF FF 00 00 00 00 00
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-229.7.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Tue Jun 23 22:06:11 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-229.7.2.el7.x86_64 root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro rhgb quiet LANG=en_US.UTF-8 systemd.debug
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de5c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007de5c800-0x000000007de5e7ff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007de5e800-0x000000007de607ff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007de60800-0x000000007dffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 320 /0MH651, BIOS 1.1.12 06/17/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7de5c max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 000000000 write-back
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 07DF00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 080000000 mask F80000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 64GB, type WB
[ 0.000000] reg 1, base: 2016MB, range: 32MB, type UC
[ 0.000000] reg 2, base: 2015MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 2GB, range: 2GB, type UC
[ 0.000000] total RAM covered: 63455M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 16GB, type WB
[ 0.000000] reg 6, base: 32GB, range: 32GB, type WB
[ 0.000000] e820: update [mem 0x7df00000-0xffffffff] usable ==> reserved
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ee5000, 0x01ee5fff] PGTABLE
[ 0.000000] BRK [0x01ee6000, 0x01ee6fff] PGTABLE
[ 0.000000] BRK [0x01ee7000, 0x01ee7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7dc00000-0x7ddfffff]
[ 0.000000] [mem 0x7dc00000-0x7ddfffff] page 2M
[ 0.000000] BRK [0x01ee8000, 0x01ee8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7dbfffff]
[ 0.000000] [mem 0x7c000000-0x7dbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7de00000-0x7de5bfff]
[ 0.000000] [mem 0x7de00000-0x7de5bfff] page 4k
[ 0.000000] BRK [0x01ee9000, 0x01ee9fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35de6000-0x36eeafff]
[ 0.000000] ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000fd073 00074 (v01 DELL B8K 00000014 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000000fd18b 000F4 (v03 DELL B8K 00000014 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000fffca44d 038C6 (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 000000007de5c800 00040
[ 0.000000] ACPI: SSDT 00000000fffcde34 000AC (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 00000000000fd27f 00092 (v01 DELL B8K 00000014 ASL 00000061)
[ 0.000000] ACPI: BOOT 00000000000fd311 00028 (v01 DELL B8K 00000014 ASL 00000061)
[ 0.000000] ACPI: MCFG 00000000000fd339 0003E (v01 DELL B8K 00000014 ASL 00000061)
[ 0.000000] ACPI: HPET 00000000000fd377 00038 (v01 DELL B8K 00000014 ASL 00000061)
[ 0.000000] ACPI: SLIC 00000000000fd3af 00176 (v01 DELL B8K 00000014 ASL 00000061)
[ 0.000000] ACPI: SSDT 000000007de5c840 00175 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007de5cc49 00175 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007de5d052 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007de5bfff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7de5bfff]
[ 0.000000] NODE_DATA [mem 0x7de35000-0x7de5bfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b600000-ffff88007d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7de5bfff]
[ 0.000000] On node 0 totalpages: 515578
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7994 pages used for memmap
[ 0.000000] DMA32 zone: 511580 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x7e000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007dc00000 s82752 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507499
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-229.7.2.el7.x86_64 root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro rhgb quiet LANG=en_US.UTF-8 systemd.debug
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1995448k/2062704k available (6242k kernel code, 392k absent, 66864k reserved, 4180k data, 1604k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
[ 0.000000] Experimental no-CBs for all CPUs
[ 0.000000] Experimental no-CBs CPUs: 0-7.
[ 0.000000] NR_IRQS:327936 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3400.088 MHz processor
[ 0.002010] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.17 BogoMIPS (lpj=3400088)
[ 0.002016] pid_max: default: 32768 minimum: 301
[ 0.002070] Security Framework initialized
[ 0.002100] SELinux: Initializing.
[ 0.002118] SELinux: Starting in permissive mode
[ 0.002524] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005789] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.007338] Mount-cache hash table entries: 4096
[ 0.007992] Initializing cgroup subsys memory
[ 0.008046] Initializing cgroup subsys devices
[ 0.008052] Initializing cgroup subsys freezer
[ 0.008056] Initializing cgroup subsys net_cls
[ 0.008059] Initializing cgroup subsys blkio
[ 0.008062] Initializing cgroup subsys perf_event
[ 0.008065] Initializing cgroup subsys hugetlb
[ 0.008138] CPU: Physical Processor ID: 0
[ 0.008141] CPU: Processor Core ID: 0
[ 0.008146] mce: CPU supports 4 MCE banks
[ 0.008162] CPU0: Thermal monitoring enabled (TM1)
[ 0.008179] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
[ 0.008266] Freeing SMP alternatives: 24k freed
[ 0.009860] ACPI: Core revision 20130517
[ 0.060139] ACPI: All ACPI Tables successfully acquired
[ 0.060896] ftrace: allocating 23916 entries in 94 pages
[ 0.069705] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079930] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.40GHz (fam: 0f, model: 06, stepping: 05)
[ 0.080000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.080000] ... version: 0
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 18
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 0000007fffffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 000000000003ffff
[ 0.081602] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.081759] smpboot: Booting Node 0, Processors #1
[ 0.093057] Brought up 2 CPUs
[ 0.093065] smpboot: Total of 2 processors activated (13600.35 BogoMIPS)
[ 0.096183] devtmpfs: initialized
[ 0.099880] EVM: security.selinux
[ 0.099883] EVM: security.ima
[ 0.099885] EVM: security.capability
[ 0.099935] PM: Registering ACPI NVS region [mem 0x7de5c800-0x7de5e7ff] (8192 bytes)
[ 0.101261] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.101414] NET: Registered protocol family 16
[ 0.101663] ACPI: bus type PCI registered
[ 0.101668] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.101757] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.101762] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.114903] PCI: Using configuration type 1 for base access
[ 0.116353] ACPI: Added _OSI(Module Device)
[ 0.116353] ACPI: Added _OSI(Processor Device)
[ 0.116353] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116353] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.117668] ACPI: EC: Look up EC in DSDT
[ 0.138316] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.139618] ACPI: Interpreter enabled
[ 0.139635] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.139657] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.139660] ACPI: Using IOAPIC for interrupt routing
[ 0.140246] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.267052] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.267066] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.267077] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.278104] PCI host bridge to bus 0000:00
[ 0.278110] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.278113] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.278116] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.278119] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.278122] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
[ 0.278124] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.278127] pci_bus 0000:00: root bus resource [mem 0x7df00000-0xdfffffff]
[ 0.278130] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.278137] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfedfffff]
[ 0.278150] pci 0000:00:00.0: [1002:5a33] type 00 class 0x060000
[ 0.278502] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
[ 0.278897] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.278929] pci 0000:00:12.0: reg 0x10: [io 0xfe00-0xfe07]
[ 0.278943] pci 0000:00:12.0: reg 0x14: [io 0xfe10-0xfe13]
[ 0.278956] pci 0000:00:12.0: reg 0x18: [io 0xfe20-0xfe27]
[ 0.278970] pci 0000:00:12.0: reg 0x1c: [io 0xfe30-0xfe33]
[ 0.278983] pci 0000:00:12.0: reg 0x20: [io 0xfec0-0xfecf]
[ 0.279003] pci 0000:00:12.0: reg 0x24: [mem 0xdfff6c00-0xdfff6fff]
[ 0.279032] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.279408] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.279429] pci 0000:00:13.0: reg 0x10: [mem 0xdfff7000-0xdfff7fff]
[ 0.279781] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.279836] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.279857] pci 0000:00:13.1: reg 0x10: [mem 0xdfff8000-0xdfff8fff]
[ 0.280218] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.280280] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.280300] pci 0000:00:13.2: reg 0x10: [mem 0xdfff9000-0xdfff9fff]
[ 0.280653] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.280702] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.280722] pci 0000:00:13.3: reg 0x10: [mem 0xdfffa000-0xdfffafff]
[ 0.281079] pci 0000:00:13.3: System wakeup disabled by ACPI
[ 0.281129] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.281149] pci 0000:00:13.4: reg 0x10: [mem 0xdfffb000-0xdfffbfff]
[ 0.281500] pci 0000:00:13.4: System wakeup disabled by ACPI
[ 0.281558] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.281586] pci 0000:00:13.5: reg 0x10: [mem 0xdfff6900-0xdfff69ff]
[ 0.281702] pci 0000:00:13.5: supports D1 D2
[ 0.281705] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.281992] pci 0000:00:13.5: System wakeup disabled by ACPI
[ 0.282052] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.282078] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.282091] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
[ 0.282473] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.282498] pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.282511] pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.282525] pci 0000:00:14.1: reg 0x18: [io 0x0170-0x0177]
[ 0.282538] pci 0000:00:14.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.282551] pci 0000:00:14.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.282580] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.282582] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.282585] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.282588] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.282944] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.282979] pci 0000:00:14.2: reg 0x10: [mem 0xdfffc000-0xdfffffff 64bit]
[ 0.283091] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.283415] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.283819] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.284150] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.284266] pci 0000:01:05.0: [1002:5a61] type 00 class 0x030000
[ 0.284282] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.284290] pci 0000:01:05.0: reg 0x14: [io 0xec00-0xecff]
[ 0.284298] pci 0000:01:05.0: reg 0x18: [mem 0xdfdf0000-0xdfdfffff]
[ 0.284320] pci 0000:01:05.0: reg 0x30: [mem 0xdfe00000-0xdfe1ffff pref]
[ 0.284347] pci 0000:01:05.0: supports D1 D2
[ 0.284403] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.284410] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.284414] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfefffff]
[ 0.284419] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.284570] pci 0000:02:09.0: [14e4:170c] type 00 class 0x020000
[ 0.284599] pci 0000:02:09.0: reg 0x10: [mem 0xdfcfe000-0xdfcfffff]
[ 0.284724] pci 0000:02:09.0: supports D1 D2
[ 0.284727] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.284784] pci 0000:02:09.0: System wakeup disabled by ACPI
[ 0.284871] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.284881] pci 0000:00:14.4: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.284887] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.284891] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.284894] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.284897] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
[ 0.284900] pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.284903] pci 0000:00:14.4: bridge window [mem 0x7df00000-0xdfffffff] (subtractive decode)
[ 0.284906] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.284909] pci 0000:00:14.4: bridge window [mem 0xfed00000-0xfedfffff] (subtractive decode)
[ 0.306505] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
[ 0.306874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
[ 0.307246] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
[ 0.307610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
[ 0.307974] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
[ 0.308340] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
[ 0.308706] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
[ 0.309073] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
[ 0.309180] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.309295] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.309295] vgaarb: loaded
[ 0.309295] vgaarb: bridge control possible 0000:01:05.0
[ 0.309295] SCSI subsystem initialized
[ 0.309295] ACPI: bus type USB registered
[ 0.309295] usbcore: registered new interface driver usbfs
[ 0.309295] usbcore: registered new interface driver hub
[ 0.309303] usbcore: registered new device driver usb
[ 0.309303] PCI: Using ACPI for IRQ routing
[ 0.321705] PCI: pci_cache_line_size set to 64 bytes
[ 0.321770] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.321773] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.321776] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.321779] e820: reserve RAM buffer [mem 0x7de5c800-0x7fffffff]
[ 0.321972] NetLabel: Initializing
[ 0.321975] NetLabel: domain hash size = 128
[ 0.321977] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.322009] NetLabel: unlabeled traffic allowed by default
[ 0.322064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.322071] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.324018] Switching to clocksource hpet
[ 0.337412] pnp: PnP ACPI init
[ 0.337450] ACPI: bus type PNP registered
[ 0.340987] system 00:00: [io 0x0228-0x022f] has been reserved
[ 0.340992] system 00:00: [io 0x040b] has been reserved
[ 0.340995] system 00:00: [io 0x04d6] has been reserved
[ 0.340999] system 00:00: [io 0x0b10-0x0b1f] has been reserved
[ 0.341013] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.341017] system 00:00: [io 0x0c14] has been reserved
[ 0.341027] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.341030] system 00:00: [io 0x0c6c-0x0c6f] has been reserved
[ 0.341034] system 00:00: [io 0x0cd0-0x0cdf] has been reserved
[ 0.341037] system 00:00: [io 0x0800-0x08fe] has been reserved
[ 0.341040] system 00:00: [io 0x0900-0x09fe] has been reserved
[ 0.341044] system 00:00: [io 0x4000-0x40fe] could not be reserved
[ 0.341047] system 00:00: [io 0x4100-0x411f] has been reserved
[ 0.341053] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.341199] pnp 00:01: [dma 4]
[ 0.341224] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.341390] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.341519] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.341656] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.352064] pnp 00:05: [dma 0 disabled]
[ 0.352667] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.357372] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.367730] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.377119] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.377124] system 00:08: [mem 0x00100000-0x00ffffff] could not be reserved
[ 0.377128] system 00:08: [mem 0x01000000-0x7de5c7ff] could not be reserved
[ 0.377131] system 00:08: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.377135] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.377138] system 00:08: [mem 0x800d0000-0x800d0fff] has been reserved
[ 0.377142] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.377145] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.377149] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.377152] system 00:08: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.377157] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.377314] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.377319] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.377328] pnp: PnP ACPI: found 10 devices
[ 0.377330] ACPI: bus type PNP unregistered
[ 0.386962] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.386968] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.386975] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfefffff]
[ 0.386979] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.386986] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.386993] pci 0000:00:14.4: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.387016] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.387020] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.387022] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.387025] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
[ 0.387028] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
[ 0.387030] pci_bus 0000:00: resource 9 [mem 0x7df00000-0xdfffffff]
[ 0.387033] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff]
[ 0.387036] pci_bus 0000:00: resource 11 [mem 0xfed00000-0xfedfffff]
[ 0.387039] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.387042] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfefffff]
[ 0.387044] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
[ 0.387048] pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.387050] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.387053] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.387056] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.387058] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000effff]
[ 0.387061] pci_bus 0000:02: resource 8 [mem 0x000f0000-0x000fffff]
[ 0.387063] pci_bus 0000:02: resource 9 [mem 0x7df00000-0xdfffffff]
[ 0.387066] pci_bus 0000:02: resource 10 [mem 0xf0000000-0xfebfffff]
[ 0.387069] pci_bus 0000:02: resource 11 [mem 0xfed00000-0xfedfffff]
[ 0.387134] NET: Registered protocol family 2
[ 0.387536] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.387734] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.388054] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.388215] TCP: reno registered
[ 0.388229] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.388272] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.388426] NET: Registered protocol family 1
[ 0.388450] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.388458] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.390827] pci 0000:01:05.0: Boot video device
[ 0.390835] PCI: CLS 64 bytes, default 64
[ 0.390984] Unpacking initramfs...
[ 0.831829] Freeing initrd memory: 17428k freed
[ 0.859578] Simple Boot Flag at 0x7a set to 0x1
[ 0.860235] microcode: CPU0 sig=0xf65, pf=0x4, revision=0x7
[ 0.860252] microcode: CPU1 sig=0xf65, pf=0x4, revision=0x7
[ 0.860328] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.860908] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.861081] Initialise system trusted keyring
[ 0.861170] audit: initializing netlink socket (disabled)
[ 0.861212] type=2000 audit(1438329251.860:1): initialized
[ 0.889059] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.890996] zbud: loaded
[ 0.891247] VFS: Disk quotas dquot_6.5.2
[ 0.891306] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.891619] msgmni has been set to 3931
[ 0.891735] Key type big_key registered
[ 0.891740] SELinux: Registering netfilter hooks
[ 0.893263] alg: No test for stdrng (krng)
[ 0.893292] NET: Registered protocol family 38
[ 0.893304] Key type asymmetric registered
[ 0.893310] Asymmetric key parser 'x509' registered
[ 0.893378] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.893444] io scheduler noop registered
[ 0.893449] io scheduler deadline registered (default)
[ 0.893484] io scheduler cfq registered
[ 0.893662] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.893686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.893903] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.893912] ACPI: Power Button [VBTN]
[ 0.893973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.893977] ACPI: Power Button [PWRF]
[ 0.894131] ACPI: Requesting acpi_cpufreq
[ 0.894604] GHES: HEST is not enabled!
[ 0.896117] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.916876] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.917647] Non-volatile memory driver v1.3
[ 0.917653] Linux agpgart interface v0.103
[ 0.917773] crash memory driver: version 1.1
[ 0.917815] rdac: device handler registered
[ 0.917914] hp_sw: device handler registered
[ 0.917921] emc: device handler registered
[ 0.917927] alua: device handler registered
[ 0.918000] libphy: Fixed MDIO Bus: probed
[ 0.918111] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.918127] ehci-pci: EHCI PCI platform driver
[ 0.918382] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 0.918431] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 0.918439] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 0.918458] ehci-pci 0000:00:13.5: debug port 1
[ 0.918518] ehci-pci 0000:00:13.5: irq 19, io mem 0xdfff6900
[ 0.924029] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 0.924124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.924130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.924134] usb usb1: Product: EHCI Host Controller
[ 0.924138] usb usb1: Manufacturer: Linux 3.10.0-229.7.2.el7.x86_64 ehci_hcd
[ 0.924142] usb usb1: SerialNumber: 0000:00:13.5
[ 0.924276] hub 1-0:1.0: USB hub found
[ 0.924288] hub 1-0:1.0: 10 ports detected
[ 0.924579] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.924588] ohci-pci: OHCI PCI platform driver
[ 0.924802] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.924849] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.924890] ohci-pci 0000:00:13.0: irq 16, io mem 0xdfff7000
[ 0.979105] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.979109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.979112] usb usb2: Product: OHCI PCI host controller
[ 0.979115] usb usb2: Manufacturer: Linux 3.10.0-229.7.2.el7.x86_64 ohci_hcd
[ 0.979117] usb usb2: SerialNumber: 0000:00:13.0
[ 0.979235] hub 2-0:1.0: USB hub found
[ 0.979255] hub 2-0:1.0: 2 ports detected
[ 0.979560] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 0.979611] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.979650] ohci-pci 0000:00:13.1: irq 17, io mem 0xdfff8000
[ 1.034098] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.034102] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.034105] usb usb3: Product: OHCI PCI host controller
[ 1.034107] usb usb3: Manufacturer: Linux 3.10.0-229.7.2.el7.x86_64 ohci_hcd
[ 1.034110] usb usb3: SerialNumber: 0000:00:13.1
[ 1.034228] hub 3-0:1.0: USB hub found
[ 1.034241] hub 3-0:1.0: 2 ports detected
[ 1.034553] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 1.034616] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.034655] ohci-pci 0000:00:13.2: irq 18, io mem 0xdfff9000
[ 1.089100] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.089104] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.089107] usb usb4: Product: OHCI PCI host controller
[ 1.089110] usb usb4: Manufacturer: Linux 3.10.0-229.7.2.el7.x86_64 ohci_hcd
[ 1.089112] usb usb4: SerialNumber: 0000:00:13.2
[ 1.089233] hub 4-0:1.0: USB hub found
[ 1.089246] hub 4-0:1.0: 2 ports detected
[ 1.089549] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 1.089601] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.089629] ohci-pci 0000:00:13.3: irq 17, io mem 0xdfffa000
[ 1.144103] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.144107] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.144109] usb usb5: Product: OHCI PCI host controller
[ 1.144112] usb usb5: Manufacturer: Linux 3.10.0-229.7.2.el7.x86_64 ohci_hcd
[ 1.144115] usb usb5: SerialNumber: 0000:00:13.3
[ 1.144235] hub 5-0:1.0: USB hub found
[ 1.144248] hub 5-0:1.0: 2 ports detected
[ 1.144570] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.144622] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.144654] ohci-pci 0000:00:13.4: irq 18, io mem 0xdfffb000
[ 1.199100] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.199104] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.199107] usb usb6: Product: OHCI PCI host controller
[ 1.199110] usb usb6: Manufacturer: Linux 3.10.0-229.7.2.el7.x86_64 ohci_hcd
[ 1.199112] usb usb6: SerialNumber: 0000:00:13.4
[ 1.199243] hub 6-0:1.0: USB hub found
[ 1.199263] hub 6-0:1.0: 2 ports detected
[ 1.199377] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.199500] usbcore: registered new interface driver usbserial
[ 1.199512] usbcore: registered new interface driver usbserial_generic
[ 1.199526] usbserial: USB Serial support registered for generic
[ 1.199573] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.202500] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.202513] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.202708] mousedev: PS/2 mouse device common for all mice
[ 1.203105] rtc_cmos 00:04: RTC can wake from S4
[ 1.203300] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.203339] rtc_cmos 00:04: alarms up to one day, 242 bytes nvram, hpet irqs
[ 1.203423] cpuidle: using governor menu
[ 1.203795] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.203973] usbcore: registered new interface driver usbhid
[ 1.203976] usbhid: USB HID core driver
[ 1.204086] drop_monitor: Initializing network drop monitor service
[ 1.204207] TCP: cubic registered
[ 1.204214] Initializing XFRM netlink socket
[ 1.204370] NET: Registered protocol family 10
[ 1.204631] NET: Registered protocol family 17
[ 1.205108] Loading compiled-in X.509 certificates
[ 1.205155] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
[ 1.205177] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
[ 1.206069] Loaded X.509 cert 'CentOS Linux kernel signing key: 0c69175720aa08135385a8ac547b0e377526ed64'
[ 1.206093] registered taskstats version 1
[ 1.209841] Key type trusted registered
[ 1.213102] Key type encrypted registered
[ 1.216206] IMA: No TPM chip found, activating TPM-bypass!
[ 1.216637] rtc_cmos 00:04: setting system clock to 2015-07-31 07:54:12 UTC (1438329252)
[ 1.217468] Freeing unused kernel memory: 1604k freed
[ 1.223831] systemd[1]: Unknown kernel switch systemd.debug. Ignoring.
[ 1.223843] systemd[1]: Supported kernel switches:
[ 1.223848] systemd[1]: systemd.unit=UNIT Default unit to start
[ 1.223852] systemd[1]: rd.systemd.unit=UNIT Default unit to start when run in initrd
[ 1.223857] systemd[1]: systemd.dump_core=0|1 Dump core on crash
[ 1.223861] systemd[1]: systemd.crash_shell=0|1 Run shell on crash
[ 1.223865] systemd[1]: systemd.crash_chvt=N Change to VT #N on crash
[ 1.223869] systemd[1]: systemd.confirm_spawn=0|1 Confirm every process spawn
[ 1.223873] systemd[1]: systemd.show_status=0|1 Show status updates on the console during bootup
[ 1.223877] systemd[1]: systemd.log_target=console|kmsg|journal|journal-or-kmsg|syslog|syslog-or-kmsg|null
[ 1.223880] systemd[1]: Log target
[ 1.223884] systemd[1]: systemd.log_level=LEVEL Log level
[ 1.223888] systemd[1]: systemd.log_color=0|1 Highlight important log messages
[ 1.223892] systemd[1]: systemd.log_location=0|1 Include code location in log messages
[ 1.223896] systemd[1]: systemd.default_standard_output=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console
[ 1.223900] systemd[1]: Set default log output for services
[ 1.223904] systemd[1]: systemd.default_standard_error=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console
[ 1.223908] systemd[1]: Set default log error output for services
[ 1.223912] systemd[1]: systemd.setenv=ASSIGNMENT Set an environment variable for all spawned processes
[ 1.225279] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 1.225531] systemd[1]: Running in initial RAM disk.
[ 1.225633] systemd[1]: Set hostname to <op320.viaout.is.s.u-tokyo.ac.jp>.
[ 1.277899] systemd[1]: Expecting device dev-disk-by\x2duuid-efa50630\x2d30cb\x2d490d\x2d8513\x2d63fbcd2d869a.device...
[ 1.277925] systemd[1]: Starting -.slice.
[ 1.278233] systemd[1]: Created slice -.slice.
[ 1.278303] systemd[1]: Starting System Slice.
[ 1.278452] systemd[1]: Created slice System Slice.
[ 1.278513] systemd[1]: Starting Slices.
[ 1.278532] systemd[1]: Reached target Slices.
[ 1.278584] systemd[1]: Starting Timers.
[ 1.278602] systemd[1]: Reached target Timers.
[ 1.278656] systemd[1]: Starting Journal Socket.
[ 1.278757] systemd[1]: Listening on Journal Socket.
[ 1.278886] systemd[1]: Started dracut ask for additional cmdline parameters.
[ 1.279167] systemd[1]: Starting dracut cmdline hook...
[ 1.280208] systemd[1]: Started Load Kernel Modules.
[ 1.280261] systemd[1]: Starting Setup Virtual Console...
[ 1.281171] systemd[1]: Starting Journal Service...
[ 1.282178] systemd[1]: Started Journal Service.
[ 1.527799] systemd-udevd[215]: starting version 208
[ 1.605301] usb 5-2: new full-speed USB device number 2 using ohci-pci
[ 1.615305] libata version 3.00 loaded.
[ 1.639059] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[ 1.639072] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.639080] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.639088] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.648133] [drm] Initialized drm 1.1.0 20060810
[ 1.659132] ssb: Sonics Silicon Backplane found on PCI device 0000:02:09.0
[ 1.659192] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 1.666612] scsi host0: pata_atiixp
[ 1.667680] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver xx:xx:xx:xx:xx:xx
[ 1.705664] scsi host1: pata_atiixp
[ 1.705803] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.705808] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.705878] ahci 0000:00:12.0: version 3.0
[ 1.706263] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.706360] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.706366] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.717055] scsi host2: ahci
[ 1.737071] scsi host3: ahci
[ 1.744029] scsi host4: ahci
[ 1.750618] [drm] radeon kernel modesetting enabled.
[ 1.752042] scsi host5: ahci
[ 1.752142] ata3: SATA max UDMA/133 abar m1024@0xdfff6c00 port 0xdfff6d00 irq 23
[ 1.752149] ata4: SATA max UDMA/133 abar m1024@0xdfff6c00 port 0xdfff6d80 irq 23
[ 1.752153] ata5: SATA max UDMA/133 abar m1024@0xdfff6c00 port 0xdfff6e00 irq 23
[ 1.752157] ata6: SATA max UDMA/133 abar m1024@0xdfff6c00 port 0xdfff6e80 irq 23
[ 1.753801] [drm] initializing kernel modesetting (RS400 0x1002:0x5A61 0x1028:0x01E5).
[ 1.753834] [drm] register mmio base: 0xDFDF0000
[ 1.753837] [drm] register mmio size: 65536
[ 1.753990] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.753999] radeon 0000:01:05.0: VRAM: 32M 0x000000007E000000 - 0x000000007FFFFFFF (32M used)
[ 1.754026] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 1.755033] [drm] Detected VRAM RAM=32M, BAR=128M
[ 1.755037] [drm] RAM width 128bits DDR
[ 1.758278] [TTM] Zone kernel: Available graphics memory: 1007252 kiB
[ 1.758282] [TTM] Initializing pool allocator
[ 1.758291] [TTM] Initializing DMA pool allocator
[ 1.758330] [drm] radeon: 32M of VRAM memory ready
[ 1.758333] [drm] radeon: 512M of GTT memory ready.
[ 1.758370] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.761086] usb 5-2: New USB device found, idVendor=0409, idProduct=55aa
[ 1.761097] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.763120] hub 5-2:1.0: USB hub found
[ 1.765061] hub 5-2:1.0: 3 ports detected
[ 1.766290] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 1.773967] [drm] PCIE GART of 512M enabled (table at 0x0000000035C00000).
[ 1.774141] radeon 0000:01:05.0: WB enabled
[ 1.774148] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xffff880036783000
[ 1.774151] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.774153] [drm] Driver supports precise vblank timestamp query.
[ 1.774172] [drm] radeon: irq initialized.
[ 1.774190] [drm] Loading R300 Microcode
[ 1.774439] [drm] radeon: ring at 0x0000000080001000
[ 1.774466] [drm] ring test succeeded in 2 usecs
[ 1.775591] [drm] ib test succeeded in 0 usecs
[ 1.785141] [drm] Radeon Display Connectors
[ 1.785145] [drm] Connector 0:
[ 1.785146] [drm] VGA-1
[ 1.785149] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 1.785151] [drm] Encoders:
[ 1.785153] [drm] CRT1: INTERNAL_DAC2
[ 1.842441] [drm] fb mappable at 0xD0040000
[ 1.842445] [drm] vram apper at 0xD0000000
[ 1.842447] [drm] size 1310720
[ 1.842449] [drm] fb depth is 8
[ 1.842451] [drm] pitch is 1280
[ 1.842540] fbcon: radeondrmfb (fb0) is primary device
[ 1.875740] ata1.00: ATAPI: PHILIPS DVD+/-RW DVD8801, 4D28, max UDMA/33
[ 1.881662] ata1.00: configured for UDMA/33
[ 1.893187] tsc: Refined TSC clocksource calibration: 3400.120 MHz
[ 1.893190] Switching to clocksource tsc
[ 1.895473] Console: switching to colour frame buffer device 160x64
[ 1.897547] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 1.897550] radeon 0000:01:05.0: registered panic notifier
[ 1.897562] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:05.0 on minor 0
[ 1.902725] scsi 0:0:0:0: CD-ROM PHILIPS DVD+-RW DVD8801 4D28 PQ: 0 ANSI: 5
[ 2.061038] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.076066] usb 5-2.1: new low-speed USB device number 3 using ohci-pci
[ 2.079038] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.087043] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.172066] usb 5-2.1: New USB device found, idVendor=0409, idProduct=0025
[ 2.172071] usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.172074] usb 5-2.1: Product: MINI JPN USB KBD
[ 2.172077] usb 5-2.1: Manufacturer: NEC
[ 2.182365] input: NEC MINI JPN USB KBD as /devices/pci0000:00/0000:00:13.3/usb5/5-2/5-2.1/5-2.1:1.0/input/input2
[ 2.182593] hid-generic 0003:0409:0025.0001: input,hidraw0: USB HID v1.00 Keyboard [NEC MINI JPN USB KBD] on usb-0000:00:13.3-2.1/input0
[ 2.212043] ata3: softreset failed (device not ready)
[ 2.212074] ata3: applying PMP SRST workaround and retrying
[ 2.250066] usb 5-2.3: new low-speed USB device number 4 using ohci-pci
[ 2.345066] usb 5-2.3: New USB device found, idVendor=046d, idProduct=c001
[ 2.345070] usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.345073] usb 5-2.3: Product: USB Mouse
[ 2.345076] usb 5-2.3: Manufacturer: Logitech
[ 2.353320] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.3/usb5/5-2/5-2.3/5-2.3:1.0/input/input3
[ 2.353596] hid-generic 0003:046D:C001.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.3-2.3/input0
[ 2.367043] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.372073] ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
[ 2.372078] ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[ 2.372082] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.377131] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.377135] ata3.00: configured for UDMA/133
[ 2.377293] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
[ 2.407462] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.407470] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.407646] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.410332] sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
[ 2.410413] sd 2:0:0:0: [sda] Write Protect is off
[ 2.410418] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.410449] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.438775] sda: sda1 sda2
[ 2.439271] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.828136] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 2.831647] XFS (sda1): Mounting V4 Filesystem
[ 2.974493] XFS (sda1): Ending clean mount
[ 3.309628] systemd-journald[103]: Received SIGTERM
[ 3.902709] SELinux: Disabled at runtime.
[ 3.902755] SELinux: Unregistering netfilter hooks
[ 3.923048] type=1404 audit(1438329255.205:2): selinux=0 auid=4294967295 ses=4294967295
[ 4.079310] systemd[1]: Unknown kernel switch systemd.debug. Ignoring.
[ 4.079323] systemd[1]: Supported kernel switches:
[ 4.079330] systemd[1]: systemd.unit=UNIT Default unit to start
[ 4.079340] systemd[1]: rd.systemd.unit=UNIT Default unit to start when run in initrd
[ 4.079345] systemd[1]: systemd.dump_core=0|1 Dump core on crash
[ 4.079349] systemd[1]: systemd.crash_shell=0|1 Run shell on crash
[ 4.079353] systemd[1]: systemd.crash_chvt=N Change to VT #N on crash
[ 4.079357] systemd[1]: systemd.confirm_spawn=0|1 Confirm every process spawn
[ 4.079361] systemd[1]: systemd.show_status=0|1 Show status updates on the console during bootup
[ 4.079365] systemd[1]: systemd.log_target=console|kmsg|journal|journal-or-kmsg|syslog|syslog-or-kmsg|null
[ 4.079369] systemd[1]: Log target
[ 4.079373] systemd[1]: systemd.log_level=LEVEL Log level
[ 4.079377] systemd[1]: systemd.log_color=0|1 Highlight important log messages
[ 4.079381] systemd[1]: systemd.log_location=0|1 Include code location in log messages
[ 4.079385] systemd[1]: systemd.default_standard_output=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console
[ 4.079389] systemd[1]: Set default log output for services
[ 4.079393] systemd[1]: systemd.default_standard_error=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console
[ 4.079397] systemd[1]: Set default log error output for services
[ 4.079401] systemd[1]: systemd.setenv=ASSIGNMENT Set an environment variable for all spawned processes
[ 5.693900] systemd-readahead[361]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 7.416136] systemd-udevd[395]: starting version 208
[ 8.793936] device-mapper: uevent: version 1.0.3
[ 8.794242] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 9.444632] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.552861] systemd-journald[368]: Received request to flush runtime journal from PID 1
[ 9.745332] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 9.745379] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
[ 9.924734] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.961054] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 10.125914] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.125993] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 10.210242] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 10.210347] sp5100_tco: PCI Revision ID: 0x13
[ 10.210375] sp5100_tco: failed to find MMIO address, giving up.
[ 10.479321] type=1305 audit(1438329261.761:3): audit_pid=438 old=0 auid=4294967295 ses=4294967295 res=1
[ 10.620663] ppdev: user-space parallel port driver
[ 10.973463] sound hdaudioC0D0: autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:line
[ 10.973472] sound hdaudioC0D0: speaker_outs=1 (0x7/0x0/0x0/0x0/0x0)
[ 10.973477] sound hdaudioC0D0: hp_outs=1 (0x6/0x0/0x0/0x0/0x0)
[ 10.973480] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.973484] sound hdaudioC0D0: inputs:
[ 10.973489] sound hdaudioC0D0: Mic=0x8
[ 10.973493] sound hdaudioC0D0: Line=0x9
[ 10.983126] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 10.984951] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 10.985136] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 10.985254] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 11.529294] Adding 1951740k swap on /dev/sda2. Priority:-1 extents:1 across:1951740k FS
[ 13.375056] floppy0: no floppy controllers found
[ 13.375077] work still pending
[ 17.298423] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.033959] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.455289] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.160961] Ebtables v2.0 registered
[ 19.442086] Bridge firewalling registered
[ 19.942958] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.948111] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.703182] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[ 22.703189] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[ 22.703894] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment