Created
May 15, 2015 05:19
-
-
Save tomari/6dd3bf727a58c2b37841 to your computer and use it in GitHub Desktop.
Daewoo Lucoms WS3-E5500P1G/320X7
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| processor : 0 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 23 | |
| model name : Pentium(R) Dual-Core CPU E5500 @ 2.80GHz | |
| stepping : 10 | |
| microcode : 0xa0b | |
| cpu MHz : 1203.000 | |
| cache size : 2048 KB | |
| physical id : 0 | |
| siblings : 2 | |
| core id : 0 | |
| cpu cores : 2 | |
| apicid : 0 | |
| initial apicid : 0 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dtherm tpr_shadow vnmi flexpriority | |
| bogomips : 5585.76 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| processor : 1 | |
| vendor_id : GenuineIntel | |
| cpu family : 6 | |
| model : 23 | |
| model name : Pentium(R) Dual-Core CPU E5500 @ 2.80GHz | |
| stepping : 10 | |
| microcode : 0xa0b | |
| cpu MHz : 1203.000 | |
| cache size : 2048 KB | |
| physical id : 0 | |
| siblings : 2 | |
| core id : 1 | |
| cpu cores : 2 | |
| apicid : 1 | |
| initial apicid : 1 | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 13 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dtherm tpr_shadow vnmi flexpriority | |
| bogomips : 5585.76 | |
| clflush size : 64 | |
| cache_alignment : 64 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
| -[0000:00]-+-00.0 Intel Corporation 4 Series Chipset DRAM Controller [8086:2e30] | |
| +-02.0 Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] | |
| +-1b.0 Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] | |
| +-1c.0-[03]-- | |
| +-1c.1-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] | |
| +-1d.0 Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] | |
| +-1d.1 Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] | |
| +-1d.2 Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] | |
| +-1d.3 Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] | |
| +-1d.7 Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] | |
| +-1e.0-[01]-- | |
| +-1f.0 Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] | |
| +-1f.1 Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] | |
| +-1f.2 Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] | |
| \-1f.3 Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] | |
| /proc/interrupts | |
| CPU0 CPU1 | |
| 0: 838835 563251 IO-APIC-edge timer | |
| 1: 5 7 IO-APIC-edge i8042 | |
| 7: 0 0 IO-APIC-edge parport0 | |
| 8: 1 0 IO-APIC-edge rtc0 | |
| 9: 2 1 IO-APIC-fasteoi acpi | |
| 14: 0 0 IO-APIC-edge ata_piix | |
| 15: 0 0 IO-APIC-edge ata_piix | |
| 16: 0 0 IO-APIC-fasteoi uhci_hcd:usb5 | |
| 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4 | |
| 19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 | |
| 20: 5275 1032167 IO-APIC-fasteoi ata_piix, i801_smbus | |
| 23: 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 | |
| 42: 64041 1115071 PCI-MSI-edge enp2s0 | |
| 43: 0 0 PCI-MSI-edge i915 | |
| 44: 150 153 PCI-MSI-edge snd_hda_intel | |
| NMI: 54934 61399 Non-maskable interrupts | |
| LOC: 39306830 44382425 Local timer interrupts | |
| SPU: 0 0 Spurious interrupts | |
| PMI: 54934 61399 Performance monitoring interrupts | |
| IWI: 122302 128209 IRQ work interrupts | |
| RTR: 0 0 APIC ICR read retries | |
| RES: 205901 178995 Rescheduling interrupts | |
| CAL: 1710 1796 Function call interrupts | |
| TLB: 110165 105535 TLB shootdowns | |
| TRM: 0 0 Thermal event interrupts | |
| THR: 0 0 Threshold APIC interrupts | |
| MCE: 0 0 Machine check exceptions | |
| MCP: 317 317 Machine check polls | |
| ERR: 0 | |
| MIS: 0 | |
| /proc/ioports | |
| 0000-0cf7 : PCI Bus 0000:00 | |
| 0000-001f : dma1 | |
| 0020-0021 : pic1 | |
| 0040-0043 : timer0 | |
| 0050-0053 : timer1 | |
| 0060-0060 : keyboard | |
| 0064-0064 : keyboard | |
| 0070-0071 : rtc0 | |
| 0080-008f : dma page reg | |
| 00a0-00a1 : pic2 | |
| 00c0-00df : dma2 | |
| 00f0-00ff : fpu | |
| 0170-0177 : 0000:00:1f.1 | |
| 0170-0177 : ata_piix | |
| 01f0-01f7 : 0000:00:1f.1 | |
| 01f0-01f7 : ata_piix | |
| 0376-0376 : 0000:00:1f.1 | |
| 0376-0376 : ata_piix | |
| 0378-037a : parport0 | |
| 03c0-03df : vga+ | |
| 03f6-03f6 : 0000:00:1f.1 | |
| 03f6-03f6 : ata_piix | |
| 03f8-03ff : serial | |
| 0400-041f : 0000:00:1f.3 | |
| 0400-041f : i801_smbus | |
| 0480-04bf : gpio_ich | |
| 0480-04bf : 0000:00:1f.0 | |
| 0480-04bf : pnp 00:09 | |
| 04d0-04d1 : pnp 00:09 | |
| 0800-0803 : ACPI PM1a_EVT_BLK | |
| 0804-0805 : ACPI PM1a_CNT_BLK | |
| 0808-080b : ACPI PM_TMR | |
| 0810-0815 : ACPI CPU throttle | |
| 0828-082f : ACPI GPE0_BLK | |
| 0830-0833 : iTCO_wdt | |
| 0830-0833 : iTCO_wdt | |
| 0860-087f : iTCO_wdt | |
| 0860-087f : iTCO_wdt | |
| 0a00-0a0f : pnp 00:08 | |
| 0a00-0a0f : pnp 00:08 | |
| 0cf8-0cff : PCI conf1 | |
| 0d00-ffff : PCI Bus 0000:00 | |
| 1000-1fff : PCI Bus 0000:03 | |
| c800-c807 : 0000:00:02.0 | |
| c880-c89f : 0000:00:1d.0 | |
| c880-c89f : uhci_hcd | |
| cc00-cc1f : 0000:00:1d.1 | |
| cc00-cc1f : uhci_hcd | |
| d000-d01f : 0000:00:1d.2 | |
| d000-d01f : uhci_hcd | |
| d080-d09f : 0000:00:1d.3 | |
| d080-d09f : uhci_hcd | |
| d400-d40f : 0000:00:1f.2 | |
| d400-d40f : ata_piix | |
| d480-d483 : 0000:00:1f.2 | |
| d480-d483 : ata_piix | |
| d800-d807 : 0000:00:1f.2 | |
| d800-d807 : ata_piix | |
| d880-d883 : 0000:00:1f.2 | |
| d880-d883 : ata_piix | |
| dc00-dc07 : 0000:00:1f.2 | |
| dc00-dc07 : ata_piix | |
| e000-efff : PCI Bus 0000:02 | |
| e800-e8ff : 0000:02:00.0 | |
| e800-e8ff : r8169 | |
| ffa0-ffaf : 0000:00:1f.1 | |
| ffa0-ffaf : ata_piix | |
| /proc/iomem | |
| 00000000-00000fff : reserved | |
| 00001000-0009fbff : System RAM | |
| 0009fc00-0009ffff : reserved | |
| 000a0000-000bffff : PCI Bus 0000:00 | |
| 000c0000-000c7fff : Video ROM | |
| 000cc800-000cdfff : Adapter ROM | |
| 000d0000-000dffff : PCI Bus 0000:00 | |
| 000e0000-000fffff : reserved | |
| 000f0000-000fffff : System ROM | |
| 00100000-ddd9ffff : System RAM | |
| 01000000-01619644 : Kernel code | |
| 01619645-01a2ddff : Kernel data | |
| 01bc7000-01ee3fff : Kernel bss | |
| ddda0000-dddadfff : ACPI Tables | |
| dddae000-dddeffff : ACPI Non-volatile Storage | |
| dddf0000-efffffff : reserved | |
| dde00000-efffffff : PCI Bus 0000:00 | |
| de000000-dfffffff : Graphics Stolen Memory | |
| e0000000-efffffff : 0000:00:02.0 | |
| f0000000-f3ffffff : PCI MMCONFIG 0000 [bus 00-3f] | |
| f0000000-f3ffffff : pnp 00:0e | |
| f4000000-fed8ffff : PCI Bus 0000:00 | |
| f4000000-f41fffff : PCI Bus 0000:03 | |
| f4200000-f43fffff : PCI Bus 0000:03 | |
| f4400000-f4400fff : Intel Flush Page | |
| fdf00000-fdffffff : PCI Bus 0000:02 | |
| fdff0000-fdffffff : 0000:02:00.0 | |
| fdff0000-fdffffff : r8169 | |
| fe400000-fe7fffff : 0000:00:02.0 | |
| feaf8000-feafbfff : 0000:00:1b.0 | |
| feaf8000-feafbfff : ICH HD audio | |
| feaffc00-feafffff : 0000:00:1d.7 | |
| feaffc00-feafffff : ehci_hcd | |
| feb00000-febfffff : PCI Bus 0000:02 | |
| febc0000-febdffff : 0000:02:00.0 | |
| febff000-febfffff : 0000:02:00.0 | |
| febff000-febfffff : r8169 | |
| fec00000-fec003ff : IOAPIC 0 | |
| fed00000-fed003ff : HPET 0 | |
| fed14000-fed19fff : pnp 00:00 | |
| fed1c000-fed1ffff : pnp 00:09 | |
| fed1f410-fed1f414 : iTCO_wdt | |
| fed1f410-fed1f414 : iTCO_wdt | |
| fed20000-fed3ffff : pnp 00:09 | |
| fed40000-fed8ffff : pnp 00:09 | |
| fed90000-fed93fff : pnp 00:00 | |
| fee00000-fee00fff : Local APIC | |
| fee00000-fee00fff : reserved | |
| fee00000-fee00fff : pnp 00:0d | |
| ffc00000-ffefffff : pnp 00:0c | |
| fff00000-ffffffff : reserved | |
| 100000000-11fffffff : System RAM | |
| /proc/asound/cards | |
| 0 [Intel ]: HDA-Intel - HDA Intel | |
| HDA Intel at 0xfeaf8000 irq 44 | |
| # dmidecode 2.12 | |
| SMBIOS 2.5 present. | |
| 39 structures occupying 1558 bytes. | |
| Table at 0x000FB830. | |
| Handle 0x0000, DMI type 0, 24 bytes | |
| BIOS Information | |
| Vendor: AMI | |
| Version: 0106 | |
| Release Date: 03/22/2010 | |
| Address: 0xF0000 | |
| Runtime Size: 64 kB | |
| ROM Size: 1024 kB | |
| Characteristics: | |
| ISA is supported | |
| PCI is supported | |
| PNP is supported | |
| APM is supported | |
| BIOS is upgradeable | |
| BIOS shadowing is allowed | |
| ESCD support is available | |
| Boot from CD is supported | |
| Selectable boot is supported | |
| BIOS ROM is socketed | |
| EDD is supported | |
| 5.25"/1.2 MB floppy services are supported (int 13h) | |
| 3.5"/720 kB floppy services are supported (int 13h) | |
| 3.5"/2.88 MB floppy services are supported (int 13h) | |
| Print screen service is supported (int 5h) | |
| 8042 keyboard services are supported (int 9h) | |
| Serial services are supported (int 14h) | |
| Printer services are supported (int 17h) | |
| CGA/mono video services are supported (int 10h) | |
| ACPI is supported | |
| USB legacy is supported | |
| LS-120 boot is supported | |
| ATAPI Zip drive boot is supported | |
| BIOS boot specification is supported | |
| Targeted content distribution is supported | |
| BIOS Revision: 1.0 | |
| Handle 0x0001, DMI type 1, 27 bytes | |
| System Information | |
| Manufacturer: DAEWOO LUCOMS | |
| Product Name: SOLO TOP | |
| Version: | |
| Serial Number: | |
| UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | |
| Wake-up Type: Power Switch | |
| SKU Number: | |
| Family: <BAD INDEX> | |
| Handle 0x0002, DMI type 2, 15 bytes | |
| Base Board Information | |
| Manufacturer: PEGATRON | |
| Product Name: IPM41 | |
| Version: 1.03G | |
| Serial Number: | |
| Asset Tag: | |
| Features: | |
| Board is a hosting board | |
| Board is replaceable | |
| Location In Chassis: | |
| Chassis Handle: 0x0003 | |
| Type: Motherboard | |
| Contained Object Handles: 0 | |
| Handle 0x0003, DMI type 3, 21 bytes | |
| Chassis Information | |
| Manufacturer: Pegatron | |
| Type: Desktop | |
| Lock: Not Present | |
| Version: | |
| Serial Number: | |
| Asset Tag: | |
| Boot-up State: Safe | |
| Power Supply State: Safe | |
| Thermal State: Safe | |
| Security Status: None | |
| OEM Information: 0x00000000 | |
| Height: Unspecified | |
| Number Of Power Cords: 1 | |
| Contained Elements: 0 | |
| Handle 0x0004, DMI type 4, 40 bytes | |
| Processor Information | |
| Socket Designation: CPU 1 | |
| Type: Central Processor | |
| Family: Core 2 Duo | |
| Manufacturer: Intel | |
| ID: 7A 06 01 00 FF FB EB BF | |
| Signature: Type 0, Family 6, Model 23, Stepping 10 | |
| Flags: | |
| FPU (Floating-point unit on-chip) | |
| VME (Virtual mode extension) | |
| DE (Debugging extension) | |
| PSE (Page size extension) | |
| TSC (Time stamp counter) | |
| MSR (Model specific registers) | |
| PAE (Physical address extension) | |
| MCE (Machine check exception) | |
| CX8 (CMPXCHG8 instruction supported) | |
| APIC (On-chip APIC hardware supported) | |
| SEP (Fast system call) | |
| MTRR (Memory type range registers) | |
| PGE (Page global enable) | |
| MCA (Machine check architecture) | |
| CMOV (Conditional move instruction supported) | |
| PAT (Page attribute table) | |
| PSE-36 (36-bit page size extension) | |
| CLFSH (CLFLUSH instruction supported) | |
| DS (Debug store) | |
| ACPI (ACPI supported) | |
| MMX (MMX technology supported) | |
| FXSR (FXSAVE and FXSTOR instructions supported) | |
| SSE (Streaming SIMD extensions) | |
| SSE2 (Streaming SIMD extensions 2) | |
| SS (Self-snoop) | |
| HTT (Multi-threading) | |
| TM (Thermal monitor supported) | |
| PBE (Pending break enabled) | |
| Version: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz | |
| Voltage: 1.3 V | |
| External Clock: 200 MHz | |
| Max Speed: 2800 MHz | |
| Current Speed: 2800 MHz | |
| Status: Populated, Enabled | |
| Upgrade: Other | |
| L1 Cache Handle: 0x0005 | |
| L2 Cache Handle: 0x0006 | |
| L3 Cache Handle: 0x0007 | |
| Serial Number: To Be Filled By O.E.M. | |
| Asset Tag: To Be Filled By O.E.M. | |
| Part Number: To Be Filled By O.E.M. | |
| Core Count: 2 | |
| Core Enabled: 2 | |
| Thread Count: 2 | |
| Characteristics: | |
| 64-bit capable | |
| Handle 0x0005, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: L1-Cache | |
| Configuration: Enabled, Not Socketed, Level 1 | |
| Operational Mode: Write Back | |
| Location: Internal | |
| Installed Size: 64 kB | |
| Maximum Size: 64 kB | |
| Supported SRAM Types: | |
| Other | |
| Installed SRAM Type: Other | |
| Speed: Unknown | |
| Error Correction Type: Parity | |
| System Type: Data | |
| Associativity: 8-way Set-associative | |
| Handle 0x0006, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: L2-Cache | |
| Configuration: Enabled, Not Socketed, Level 2 | |
| Operational Mode: Write Back | |
| Location: Internal | |
| Installed Size: 2048 kB | |
| Maximum Size: 2048 kB | |
| Supported SRAM Types: | |
| Other | |
| Installed SRAM Type: Other | |
| Speed: Unknown | |
| Error Correction Type: Single-bit ECC | |
| System Type: Unified | |
| Associativity: 8-way Set-associative | |
| Handle 0x0007, DMI type 7, 19 bytes | |
| Cache Information | |
| Socket Designation: L3-Cache | |
| Configuration: Disabled, Not Socketed, Level 3 | |
| Operational Mode: Unknown | |
| Location: Internal | |
| Installed Size: 0 kB | |
| Maximum Size: 0 kB | |
| Supported SRAM Types: | |
| Unknown | |
| Installed SRAM Type: Unknown | |
| Speed: Unknown | |
| Error Correction Type: Unknown | |
| System Type: Unknown | |
| Associativity: Unknown | |
| Handle 0x0008, DMI type 5, 20 bytes | |
| Memory Controller Information | |
| Error Detecting Method: 64-bit ECC | |
| Error Correcting Capabilities: | |
| None | |
| Supported Interleave: One-way Interleave | |
| Current Interleave: One-way Interleave | |
| Maximum Memory Module Size: 4096 MB | |
| Maximum Total Memory Size: 8192 MB | |
| Supported Speeds: | |
| Other | |
| Supported Memory Types: | |
| DIMM | |
| SDRAM | |
| Memory Module Voltage: 3.3 V | |
| Associated Memory Slots: 2 | |
| 0x0009 | |
| 0x000A | |
| Enabled Error Correcting Capabilities: | |
| None | |
| Handle 0x0009, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: DIMM0 | |
| Bank Connections: 0 1 | |
| Current Speed: Unknown | |
| Type: DIMM SDRAM | |
| Installed Size: 2048 MB (Double-bank Connection) | |
| Enabled Size: 2048 MB (Double-bank Connection) | |
| Error Status: OK | |
| Handle 0x000A, DMI type 6, 12 bytes | |
| Memory Module Information | |
| Socket Designation: DIMM1 | |
| Bank Connections: 4 5 | |
| Current Speed: Unknown | |
| Type: DIMM SDRAM | |
| Installed Size: 2048 MB (Double-bank Connection) | |
| Enabled Size: 2048 MB (Double-bank Connection) | |
| Error Status: OK | |
| Handle 0x000B, DMI type 9, 13 bytes | |
| System Slot Information | |
| Designation: AGP | |
| Type: 32-bit AGP 4x | |
| Current Usage: Available | |
| Length: Short | |
| ID: 0 | |
| Characteristics: | |
| 3.3 V is provided | |
| Opening is shared | |
| PME signal is supported | |
| Handle 0x000C, DMI type 9, 13 bytes | |
| System Slot Information | |
| Designation: PCI1 | |
| Type: 32-bit PCI | |
| Current Usage: Available | |
| Length: Short | |
| ID: 1 | |
| Characteristics: | |
| 3.3 V is provided | |
| Opening is shared | |
| PME signal is supported | |
| Handle 0x000D, DMI type 11, 5 bytes | |
| OEM Strings | |
| String 1: DAEWOO LUCOMS | |
| Handle 0x000E, DMI type 13, 22 bytes | |
| BIOS Language Information | |
| Language Description Format: Long | |
| Installable Languages: 1 | |
| en|US|iso8859-1 | |
| Currently Installed Language: en|US|iso8859-1 | |
| Handle 0x000F, DMI type 15, 35 bytes | |
| System Event Log | |
| Area Length: 4 bytes | |
| Header Start Offset: 0x0000 | |
| Header Length: 2 bytes | |
| Data Start Offset: 0x0002 | |
| Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port | |
| Access Address: Index 0x046A, Data 0x046C | |
| Status: Invalid, Not Full | |
| Change Token: 0x00000000 | |
| Header Format: No Header | |
| Supported Log Type Descriptors: 6 | |
| Descriptor 1: End of log | |
| Data Format 1: OEM-specific | |
| Descriptor 2: End of log | |
| Data Format 2: OEM-specific | |
| Descriptor 3: End of log | |
| Data Format 3: OEM-specific | |
| Descriptor 4: End of log | |
| Data Format 4: OEM-specific | |
| Descriptor 5: End of log | |
| Data Format 5: OEM-specific | |
| Descriptor 6: End of log | |
| Data Format 6: OEM-specific | |
| Handle 0x0010, DMI type 16, 15 bytes | |
| Physical Memory Array | |
| Location: System Board Or Motherboard | |
| Use: System Memory | |
| Error Correction Type: None | |
| Maximum Capacity: 4 GB | |
| Error Information Handle: 0x0011 | |
| Number Of Devices: 2 | |
| Handle 0x0011, DMI type 18, 23 bytes | |
| 32-bit Memory Error Information | |
| Type: Bad Read | |
| Granularity: Device Level | |
| Operation: Read | |
| Vendor Syndrome: Unknown | |
| Memory Array Address: Unknown | |
| Device Address: Unknown | |
| Resolution: Unknown | |
| Handle 0x0012, DMI type 19, 15 bytes | |
| Memory Array Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x000FFFFFFFF | |
| Range Size: 4 GB | |
| Physical Array Handle: 0x0010 | |
| Partition Width: 4 | |
| Handle 0x0013, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0010 | |
| Error Information Handle: 0x0014 | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 2048 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: DIMM0 | |
| Bank Locator: BANK0 | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: Unknown | |
| Manufacturer: Manufacturer00 | |
| Serial Number: SerNum00 | |
| Asset Tag: AssetTagNum0 | |
| Part Number: ModulePartNumber00 | |
| Handle 0x0014, DMI type 18, 23 bytes | |
| 32-bit Memory Error Information | |
| Type: Bad Read | |
| Granularity: Device Level | |
| Operation: Read | |
| Vendor Syndrome: Unknown | |
| Memory Array Address: Unknown | |
| Device Address: Unknown | |
| Resolution: Unknown | |
| Handle 0x0015, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00000000000 | |
| Ending Address: 0x0007FFFFFFF | |
| Range Size: 2 GB | |
| Physical Device Handle: 0x0013 | |
| Memory Array Mapped Address Handle: 0x0012 | |
| Partition Row Position: 1 | |
| Interleaved Data Depth: 1 | |
| Handle 0x0016, DMI type 17, 27 bytes | |
| Memory Device | |
| Array Handle: 0x0010 | |
| Error Information Handle: 0x0017 | |
| Total Width: 64 bits | |
| Data Width: 64 bits | |
| Size: 2048 MB | |
| Form Factor: DIMM | |
| Set: None | |
| Locator: DIMM2 | |
| Bank Locator: BANK1 | |
| Type: DDR2 | |
| Type Detail: Synchronous | |
| Speed: Unknown | |
| Manufacturer: Manufacturer01 | |
| Serial Number: SerNum01 | |
| Asset Tag: AssetTagNum1 | |
| Part Number: ModulePartNumber01 | |
| Handle 0x0017, DMI type 18, 23 bytes | |
| 32-bit Memory Error Information | |
| Type: Bad Read | |
| Granularity: Device Level | |
| Operation: Read | |
| Vendor Syndrome: Unknown | |
| Memory Array Address: Unknown | |
| Device Address: Unknown | |
| Resolution: Unknown | |
| Handle 0x0018, DMI type 20, 19 bytes | |
| Memory Device Mapped Address | |
| Starting Address: 0x00080000000 | |
| Ending Address: 0x000FFFFFFFF | |
| Range Size: 2 GB | |
| Physical Device Handle: 0x0016 | |
| Memory Array Mapped Address Handle: 0x0012 | |
| Partition Row Position: 1 | |
| Interleaved Data Depth: 1 | |
| Handle 0x0019, DMI type 22, 26 bytes | |
| Portable Battery | |
| Location: Left side of System | |
| Manufacturer: Nikon Battery | |
| Manufacture Date: 08/11/97 | |
| Serial Number: NI00123 | |
| Name: Nikon Ultra Plus | |
| Chemistry: Nickel Cadmium | |
| Design Capacity: Unknown | |
| Design Voltage: Unknown | |
| SBDS Version: SMART Ver 0123 | |
| Maximum Error: Unknown | |
| OEM-specific Information: 0x00000000 | |
| Handle 0x001A, DMI type 32, 20 bytes | |
| System Boot Information | |
| Status: No errors detected | |
| Handle 0x001B, DMI type 34, 11 bytes | |
| Management Device | |
| Description: LM78-1 | |
| Type: LM78 | |
| Address: 0x00000000 | |
| Address Type: I/O Port | |
| Handle 0x001C, DMI type 28, 22 bytes | |
| Temperature Probe | |
| Description: LM78A | |
| Location: Unknown | |
| Status: Unknown | |
| Maximum Value: Unknown | |
| Minimum Value: Unknown | |
| Resolution: Unknown | |
| Tolerance: Unknown | |
| Accuracy: Unknown | |
| OEM-specific Information: 0x00000000 | |
| Nominal Value: Unknown | |
| Handle 0x001D, DMI type 36, 16 bytes | |
| Management Device Threshold Data | |
| Lower Non-critical Threshold: 1 | |
| Upper Non-critical Threshold: 2 | |
| Lower Critical Threshold: 3 | |
| Upper Critical Threshold: 4 | |
| Lower Non-recoverable Threshold: 5 | |
| Upper Non-recoverable Threshold: 6 | |
| Handle 0x001E, DMI type 35, 11 bytes | |
| Management Device Component | |
| Description: To Be Filled By O.E.M. | |
| Management Device Handle: 0x001B | |
| Component Handle: 0x001B | |
| Threshold Handle: 0x001C | |
| Handle 0x001F, DMI type 27, 14 bytes | |
| Cooling Device | |
| Temperature Probe Handle: 0x001C | |
| Type: <OUT OF SPEC> | |
| Status: <OUT OF SPEC> | |
| Cooling Unit Group: 1 | |
| OEM-specific Information: 0x00000000 | |
| Nominal Speed: Unknown Or Non-rotating | |
| Handle 0x0020, DMI type 36, 16 bytes | |
| Management Device Threshold Data | |
| Lower Non-critical Threshold: 1 | |
| Upper Non-critical Threshold: 2 | |
| Lower Critical Threshold: 3 | |
| Upper Critical Threshold: 4 | |
| Lower Non-recoverable Threshold: 5 | |
| Upper Non-recoverable Threshold: 6 | |
| Handle 0x0021, DMI type 35, 11 bytes | |
| Management Device Component | |
| Description: To Be Filled By O.E.M. | |
| Management Device Handle: 0x001B | |
| Component Handle: 0x001E | |
| Threshold Handle: 0x001F | |
| Handle 0x0022, DMI type 27, 14 bytes | |
| Cooling Device | |
| Temperature Probe Handle: 0x001C | |
| Type: <OUT OF SPEC> | |
| Status: <OUT OF SPEC> | |
| Cooling Unit Group: 1 | |
| OEM-specific Information: 0x00000000 | |
| Nominal Speed: Unknown Or Non-rotating | |
| Handle 0x0023, DMI type 36, 16 bytes | |
| Management Device Threshold Data | |
| Lower Non-critical Threshold: 1 | |
| Upper Non-critical Threshold: 2 | |
| Lower Critical Threshold: 3 | |
| Upper Critical Threshold: 4 | |
| Lower Non-recoverable Threshold: 5 | |
| Upper Non-recoverable Threshold: 6 | |
| Handle 0x0024, DMI type 35, 11 bytes | |
| Management Device Component | |
| Description: To Be Filled By O.E.M. | |
| Management Device Handle: 0x001B | |
| Component Handle: 0x0021 | |
| Threshold Handle: 0x0022 | |
| Handle 0x0025, DMI type 39, 22 bytes | |
| System Power Supply | |
| Power Unit Group: 1 | |
| Location: To Be Filled By O.E.M. | |
| Name: To Be Filled By O.E.M. | |
| Manufacturer: To Be Filled By O.E.M. | |
| Serial Number: To Be Filled By O.E.M. | |
| Asset Tag: To Be Filled By O.E.M. | |
| Model Part Number: To Be Filled By O.E.M. | |
| Revision: To Be Filled By O.E.M. | |
| Max Power Capacity: Unknown | |
| Status: Not Present | |
| Type: <OUT OF SPEC> | |
| Input Voltage Range Switching: <OUT OF SPEC> | |
| Plugged: Yes | |
| Hot Replaceable: No | |
| Cooling Device Handle: 0x001F | |
| Handle 0x0026, DMI type 127, 4 bytes | |
| End Of Table | |
| [ 0.000000] CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28 | |
| [ 0.000000] Initializing cgroup subsys cpuset | |
| [ 0.000000] Initializing cgroup subsys cpu | |
| [ 0.000000] Initializing cgroup subsys cpuacct | |
| [ 0.000000] Linux version 3.10.0-229.4.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Wed May 13 10:06:09 UTC 2015 | |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-229.4.2.el7.x86_64 root=/dev/mapper/centos_iworks-root ro rd.lvm.lv=centos_iworks/root rd.lvm.lv=centos_iworks/swap rhgb quiet LANG=en_US.UTF-8 systemd.debug | |
| [ 0.000000] e820: BIOS-provided physical RAM map: | |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable | |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved | |
| [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved | |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddd9ffff] usable | |
| [ 0.000000] BIOS-e820: [mem 0x00000000ddda0000-0x00000000dddadfff] ACPI data | |
| [ 0.000000] BIOS-e820: [mem 0x00000000dddae000-0x00000000dddeffff] ACPI NVS | |
| [ 0.000000] BIOS-e820: [mem 0x00000000dddf0000-0x00000000dfffffff] reserved | |
| [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
| [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved | |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable | |
| [ 0.000000] NX (Execute Disable) protection: active | |
| [ 0.000000] SMBIOS 2.5 present. | |
| [ 0.000000] DMI: DAEWOO LUCOMS SOLO TOP/IPM41, BIOS 0106 03/22/2010 | |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved | |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable | |
| [ 0.000000] No AGP bridge found | |
| [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 | |
| [ 0.000000] MTRR default type: uncachable | |
| [ 0.000000] MTRR fixed ranges enabled: | |
| [ 0.000000] 00000-9FFFF write-back | |
| [ 0.000000] A0000-BFFFF uncachable | |
| [ 0.000000] C0000-CFFFF write-protect | |
| [ 0.000000] D0000-DFFFF uncachable | |
| [ 0.000000] E0000-EFFFF write-through | |
| [ 0.000000] F0000-FFFFF write-protect | |
| [ 0.000000] MTRR variable ranges enabled: | |
| [ 0.000000] 0 base 000000000 mask F00000000 write-back | |
| [ 0.000000] 1 base 100000000 mask FE0000000 write-back | |
| [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable | |
| [ 0.000000] 3 base 0DDE00000 mask FFFE00000 uncachable | |
| [ 0.000000] 4 base 0DE000000 mask FFE000000 uncachable | |
| [ 0.000000] 5 disabled | |
| [ 0.000000] 6 disabled | |
| [ 0.000000] 7 disabled | |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 | |
| [ 0.000000] original variable MTRRs | |
| [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB | |
| [ 0.000000] reg 1, base: 4GB, range: 512MB, type WB | |
| [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC | |
| [ 0.000000] reg 3, base: 3550MB, range: 2MB, type UC | |
| [ 0.000000] reg 4, base: 3552MB, range: 32MB, type UC | |
| [ 0.000000] total RAM covered: 4062M | |
| [ 0.000000] Found optimal setting for mtrr clean up | |
| [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G | |
| [ 0.000000] New variable MTRRs | |
| [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB | |
| [ 0.000000] reg 1, base: 3550MB, range: 2MB, type UC | |
| [ 0.000000] reg 2, base: 3552MB, range: 32MB, type UC | |
| [ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC | |
| [ 0.000000] reg 4, base: 4GB, range: 512MB, type WB | |
| [ 0.000000] e820: update [mem 0xdde00000-0xffffffff] usable ==> reserved | |
| [ 0.000000] e820: last_pfn = 0xddda0 max_arch_pfn = 0x400000000 | |
| [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] | |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 | |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] | |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k | |
| [ 0.000000] BRK [0x01ee5000, 0x01ee5fff] PGTABLE | |
| [ 0.000000] BRK [0x01ee6000, 0x01ee6fff] PGTABLE | |
| [ 0.000000] BRK [0x01ee7000, 0x01ee7fff] PGTABLE | |
| [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff] | |
| [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M | |
| [ 0.000000] BRK [0x01ee8000, 0x01ee8fff] PGTABLE | |
| [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff] | |
| [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M | |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] | |
| [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M | |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xddd9ffff] | |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k | |
| [ 0.000000] [mem 0x00200000-0xddbfffff] page 2M | |
| [ 0.000000] [mem 0xddc00000-0xddd9ffff] page 4k | |
| [ 0.000000] RAMDISK: [mem 0x35de5000-0x36eeafff] | |
| [ 0.000000] ACPI: RSDP 00000000000f90f0 00024 (v02 ACPIAM) | |
| [ 0.000000] ACPI: XSDT 00000000ddda0100 00064 (v01 DAEWOO SOLOTOP 20100322 MSFT 00000097) | |
| [ 0.000000] ACPI: FACP 00000000ddda0290 000F4 (v03 IPM41 Jooyon 20100322 MSFT 00000097) | |
| [ 0.000000] ACPI: DSDT 00000000ddda05c0 0579B (v01 DAEWOO SOLOTOP 00000006 INTL 20051117) | |
| [ 0.000000] ACPI: FACS 00000000dddae000 00040 | |
| [ 0.000000] ACPI: APIC 00000000ddda0390 0006C (v01 IPM41 APIC1615 20100322 MSFT 00000097) | |
| [ 0.000000] ACPI: MCFG 00000000ddda0400 0003C (v01 IPM41 OEMMCFG 20100322 MSFT 00000097) | |
| [ 0.000000] ACPI: SLIC 00000000ddda0440 00176 (v01 DAEWOO SOLOTOP 20100322 MSFT 00000097) | |
| [ 0.000000] ACPI: OEMB 00000000dddae040 00076 (v01 IPM41 OEMB1615 20100322 MSFT 00000097) | |
| [ 0.000000] ACPI: HPET 00000000ddda85c0 00038 (v01 IPM41 OEMHPET 20100322 MSFT 00000097) | |
| [ 0.000000] ACPI: GSCI 00000000dddae0c0 02024 (v01 IPM41 GMCHSCI 20100322 MSFT 00000097) | |
| [ 0.000000] ACPI: SSDT 00000000dddb0c40 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) | |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 | |
| [ 0.000000] No NUMA configuration found | |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] | |
| [ 0.000000] NODE_DATA [mem 0x11ffd5000-0x11fffbfff] | |
| [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] | |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] | |
| [ 0.000000] Normal [mem 0x100000000-0x11fffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] | |
| [ 0.000000] node 0: [mem 0x00100000-0xddd9ffff] | |
| [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] | |
| [ 0.000000] On node 0 totalpages: 1039678 | |
| [ 0.000000] DMA zone: 64 pages used for memmap | |
| [ 0.000000] DMA zone: 21 pages reserved | |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 | |
| [ 0.000000] DMA32 zone: 14135 pages used for memmap | |
| [ 0.000000] DMA32 zone: 904608 pages, LIFO batch:31 | |
| [ 0.000000] Normal zone: 2048 pages used for memmap | |
| [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 | |
| [ 0.000000] Reserving Intel graphics stolen memory at 0xde000000-0xdfffffff | |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x808 | |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 | |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) | |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) | |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) | |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) | |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) | |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 | |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| [ 0.000000] ACPI: IRQ0 used by override. | |
| [ 0.000000] ACPI: IRQ2 used by override. | |
| [ 0.000000] ACPI: IRQ9 used by override. | |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information | |
| [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 | |
| [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs | |
| [ 0.000000] nr_irqs_gsi: 40 | |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0xddda0000-0xdddadfff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0xdddae000-0xdddeffff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0xdddf0000-0xdfffffff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff] | |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] | |
| [ 0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices | |
| [ 0.000000] Booting paravirtualized kernel on bare hardware | |
| [ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 | |
| [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82752 r8192 d23744 u524288 | |
| [ 0.000000] pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152 | |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 | |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023410 | |
| [ 0.000000] Policy zone: Normal | |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-229.4.2.el7.x86_64 root=/dev/mapper/centos_iworks-root ro rd.lvm.lv=centos_iworks/root rd.lvm.lv=centos_iworks/swap rhgb quiet LANG=en_US.UTF-8 systemd.debug | |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 | |
| [ 0.000000] Checking aperture... | |
| [ 0.000000] No AGP bridge found | |
| [ 0.000000] Memory: 3993460k/4718592k available (6245k kernel code, 559880k absent, 165252k reserved, 4177k data, 1604k init) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] Hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=4. | |
| [ 0.000000] Experimental no-CBs for all CPUs | |
| [ 0.000000] Experimental no-CBs CPUs: 0-3. | |
| [ 0.000000] NR_IRQS:327936 nr_irqs:712 16 | |
| [ 0.000000] Console: colour VGA+ 80x25 | |
| [ 0.000000] console [tty0] enabled | |
| [ 0.000000] allocated 16777216 bytes of page_cgroup | |
| [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
| [ 0.000000] hpet clockevent registered | |
| [ 0.000000] tsc: Fast TSC calibration using PIT | |
| [ 0.000000] tsc: Detected 2792.884 MHz processor | |
| [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.76 BogoMIPS (lpj=2792884) | |
| [ 0.001008] pid_max: default: 32768 minimum: 301 | |
| [ 0.001035] Security Framework initialized | |
| [ 0.001047] SELinux: Initializing. | |
| [ 0.001056] SELinux: Starting in permissive mode | |
| [ 0.002236] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| [ 0.004390] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.005412] Mount-cache hash table entries: 4096 | |
| [ 0.005724] Initializing cgroup subsys memory | |
| [ 0.005743] Initializing cgroup subsys devices | |
| [ 0.005744] Initializing cgroup subsys freezer | |
| [ 0.005746] Initializing cgroup subsys net_cls | |
| [ 0.005748] Initializing cgroup subsys blkio | |
| [ 0.005749] Initializing cgroup subsys perf_event | |
| [ 0.005751] Initializing cgroup subsys hugetlb | |
| [ 0.005782] CPU: Physical Processor ID: 0 | |
| [ 0.005783] CPU: Processor Core ID: 0 | |
| [ 0.005785] mce: CPU supports 6 MCE banks | |
| [ 0.005793] CPU0: Thermal monitoring enabled (TM2) | |
| [ 0.005801] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 | |
| Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 | |
| tlb_flushall_shift: -1 | |
| [ 0.005875] Freeing SMP alternatives: 24k freed | |
| [ 0.007233] ACPI: Core revision 20130517 | |
| [ 0.009383] ACPI: All ACPI Tables successfully acquired | |
| [ 0.010008] ftrace: allocating 23915 entries in 94 pages | |
| [ 0.016495] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| [ 0.026971] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5500 @ 2.80GHz (fam: 06, model: 17, stepping: 0a) | |
| [ 0.027000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. | |
| [ 0.027000] ... version: 2 | |
| [ 0.027000] ... bit width: 40 | |
| [ 0.027000] ... generic registers: 2 | |
| [ 0.027000] ... value mask: 000000ffffffffff | |
| [ 0.027000] ... max period: 000000007fffffff | |
| [ 0.027000] ... fixed-purpose events: 3 | |
| [ 0.027000] ... event mask: 0000000700000003 | |
| [ 0.027591] CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28 | |
| [ 0.027670] smpboot: Booting Node 0, Processors #1 | |
| [ 0.040035] Brought up 2 CPUs | |
| [ 0.040040] smpboot: Total of 2 processors activated (11171.53 BogoMIPS) | |
| [ 0.040152] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. | |
| [ 0.041161] devtmpfs: initialized | |
| [ 0.045107] EVM: security.selinux | |
| [ 0.045108] EVM: security.ima | |
| [ 0.045109] EVM: security.capability | |
| [ 0.045140] PM: Registering ACPI NVS region [mem 0xdddae000-0xdddeffff] (270336 bytes) | |
| [ 0.046090] atomic64 test passed for x86-64 platform with CX8 and with SSE | |
| [ 0.046193] NET: Registered protocol family 16 | |
| [ 0.046353] ACPI: bus type PCI registered | |
| [ 0.046355] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
| [ 0.046405] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) | |
| [ 0.046407] PCI: not using MMCONFIG | |
| [ 0.046408] PCI: Using configuration type 1 for base access | |
| [ 0.048048] ACPI: Added _OSI(Module Device) | |
| [ 0.048048] ACPI: Added _OSI(Processor Device) | |
| [ 0.048048] ACPI: Added _OSI(3.0 _SCP Extensions) | |
| [ 0.048048] ACPI: Added _OSI(Processor Aggregator Device) | |
| [ 0.049108] ACPI: EC: Look up EC in DSDT | |
| [ 0.050010] ACPI: Executed 1 blocks of module-level executable AML code | |
| [ 0.051484] ACPI: SSDT 00000000dddb00f0 002F2 (v01 DpgPmm P001Ist 00000011 INTL 20051117) | |
| [ 0.051662] ACPI: Dynamic OEM Table Load: | |
| [ 0.051665] ACPI: SSDT (null) 002F2 (v01 DpgPmm P001Ist 00000011 INTL 20051117) | |
| [ 0.051743] ACPI: SSDT 00000000dddb06f0 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117) | |
| [ 0.051906] ACPI: Dynamic OEM Table Load: | |
| [ 0.051908] ACPI: SSDT (null) 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117) | |
| [ 0.052069] ACPI: SSDT 00000000dddb03f0 002F2 (v01 DpgPmm P002Ist 00000012 INTL 20051117) | |
| [ 0.052245] ACPI: Dynamic OEM Table Load: | |
| [ 0.052247] ACPI: SSDT (null) 002F2 (v01 DpgPmm P002Ist 00000012 INTL 20051117) | |
| [ 0.052303] ACPI: SSDT 00000000dddb0bb0 00085 (v01 PmRef P002Cst 00003000 INTL 20051117) | |
| [ 0.052468] ACPI: Dynamic OEM Table Load: | |
| [ 0.052470] ACPI: SSDT (null) 00085 (v01 PmRef P002Cst 00003000 INTL 20051117) | |
| [ 0.052683] ACPI: Interpreter enabled | |
| [ 0.052688] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) | |
| [ 0.052692] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) | |
| [ 0.052703] ACPI: (supports S0 S3 S4 S5) | |
| [ 0.052704] ACPI: Using IOAPIC for interrupt routing | |
| [ 0.052721] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) | |
| [ 0.053691] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources | |
| [ 0.055981] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
| [ 0.060065] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) | |
| [ 0.060071] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] | |
| [ 0.060075] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM | |
| [ 0.060184] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge | |
| [ 0.060296] PCI host bridge to bus 0000:00 | |
| [ 0.060299] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 0.060301] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] | |
| [ 0.060302] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] | |
| [ 0.060304] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] | |
| [ 0.060306] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] | |
| [ 0.060308] pci_bus 0000:00: root bus resource [mem 0xdde00000-0xefffffff] | |
| [ 0.060310] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfed8ffff] | |
| [ 0.060319] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 | |
| [ 0.060338] DMAR: Forcing write-buffer flush capability | |
| [ 0.060339] DMAR: Disabling IOMMU for graphics on this chipset | |
| [ 0.060397] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000 | |
| [ 0.060409] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit] | |
| [ 0.060415] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] | |
| [ 0.060420] pci 0000:00:02.0: reg 0x20: [io 0xc800-0xc807] | |
| [ 0.060515] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 | |
| [ 0.060529] pci 0000:00:1b.0: reg 0x10: [mem 0xfeaf8000-0xfeafbfff 64bit] | |
| [ 0.060596] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold | |
| [ 0.060654] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 | |
| [ 0.060716] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold | |
| [ 0.060750] pci 0000:00:1c.0: System wakeup disabled by ACPI | |
| [ 0.060781] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 | |
| [ 0.060848] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold | |
| [ 0.060884] pci 0000:00:1c.1: System wakeup disabled by ACPI | |
| [ 0.060918] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 | |
| [ 0.060954] pci 0000:00:1d.0: reg 0x20: [io 0xc880-0xc89f] | |
| [ 0.061011] pci 0000:00:1d.0: System wakeup disabled by ACPI | |
| [ 0.061039] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 | |
| [ 0.061075] pci 0000:00:1d.1: reg 0x20: [io 0xcc00-0xcc1f] | |
| [ 0.061130] pci 0000:00:1d.1: System wakeup disabled by ACPI | |
| [ 0.061158] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 | |
| [ 0.061194] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f] | |
| [ 0.061248] pci 0000:00:1d.2: System wakeup disabled by ACPI | |
| [ 0.061276] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 | |
| [ 0.061312] pci 0000:00:1d.3: reg 0x20: [io 0xd080-0xd09f] | |
| [ 0.061366] pci 0000:00:1d.3: System wakeup disabled by ACPI | |
| [ 0.061402] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 | |
| [ 0.061419] pci 0000:00:1d.7: reg 0x10: [mem 0xfeaffc00-0xfeafffff] | |
| [ 0.061494] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold | |
| [ 0.061525] pci 0000:00:1d.7: System wakeup disabled by ACPI | |
| [ 0.061554] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 | |
| [ 0.061618] pci 0000:00:1e.0: System wakeup disabled by ACPI | |
| [ 0.061650] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 | |
| [ 0.061722] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815] | |
| [ 0.061727] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO | |
| [ 0.061730] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) | |
| [ 0.061806] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a | |
| [ 0.061818] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] | |
| [ 0.061827] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] | |
| [ 0.061835] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] | |
| [ 0.061843] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb] | |
| [ 0.061851] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] | |
| [ 0.061869] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] | |
| [ 0.061870] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] | |
| [ 0.061872] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] | |
| [ 0.061874] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] | |
| [ 0.061925] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f | |
| [ 0.061938] pci 0000:00:1f.2: reg 0x10: [io 0xdc00-0xdc07] | |
| [ 0.061945] pci 0000:00:1f.2: reg 0x14: [io 0xd880-0xd883] | |
| [ 0.061952] pci 0000:00:1f.2: reg 0x18: [io 0xd800-0xd807] | |
| [ 0.061959] pci 0000:00:1f.2: reg 0x1c: [io 0xd480-0xd483] | |
| [ 0.061966] pci 0000:00:1f.2: reg 0x20: [io 0xd400-0xd40f] | |
| [ 0.061998] pci 0000:00:1f.2: PME# supported from D3hot | |
| [ 0.062054] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 | |
| [ 0.062101] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] | |
| [ 0.062210] pci 0000:00:1c.0: PCI bridge to [bus 03] | |
| [ 0.062277] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 | |
| [ 0.062293] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff] | |
| [ 0.062320] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit] | |
| [ 0.062337] pci 0000:02:00.0: reg 0x20: [mem 0xfdff0000-0xfdffffff 64bit pref] | |
| [ 0.062348] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] | |
| [ 0.062422] pci 0000:02:00.0: supports D1 D2 | |
| [ 0.062424] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| [ 0.064023] pci 0000:00:1c.1: PCI bridge to [bus 02] | |
| [ 0.064031] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] | |
| [ 0.064037] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] | |
| [ 0.064046] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] | |
| [ 0.064146] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) | |
| [ 0.064160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) | |
| [ 0.064164] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) | |
| [ 0.064168] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) | |
| [ 0.064173] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) | |
| [ 0.064177] pci 0000:00:1e.0: bridge window [mem 0xdde00000-0xefffffff] (subtractive decode) | |
| [ 0.064181] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfed8ffff] (subtractive decode) | |
| [ 0.064601] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) | |
| [ 0.064647] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) | |
| [ 0.064691] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) | |
| [ 0.064736] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) | |
| [ 0.064780] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) | |
| [ 0.064824] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. | |
| [ 0.064869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. | |
| [ 0.064914] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) | |
| [ 0.064953] ACPI: Enabled 1 GPEs in block 00 to 1F | |
| [ 0.065027] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none | |
| [ 0.065027] vgaarb: loaded | |
| [ 0.065027] vgaarb: bridge control possible 0000:00:02.0 | |
| [ 0.065092] SCSI subsystem initialized | |
| [ 0.065113] ACPI: bus type USB registered | |
| [ 0.065131] usbcore: registered new interface driver usbfs | |
| [ 0.065138] usbcore: registered new interface driver hub | |
| [ 0.065142] usbcore: registered new device driver usb | |
| [ 0.065142] PCI: Using ACPI for IRQ routing | |
| [ 0.066617] PCI: pci_cache_line_size set to 64 bytes | |
| [ 0.066655] Expanded resource reserved due to conflict with PCI Bus 0000:00 | |
| [ 0.066657] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] | |
| [ 0.066659] e820: reserve RAM buffer [mem 0xddda0000-0xdfffffff] | |
| [ 0.066753] NetLabel: Initializing | |
| [ 0.066755] NetLabel: domain hash size = 128 | |
| [ 0.066756] NetLabel: protocols = UNLABELED CIPSOv4 | |
| [ 0.066772] NetLabel: unlabeled traffic allowed by default | |
| [ 0.066806] HPET: 3 timers in total, 0 timers will be used for per-cpu timer | |
| [ 0.066809] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 | |
| [ 0.066813] hpet0: 3 comparators, 64-bit 14.318180 MHz counter | |
| [ 0.068011] Switching to clocksource hpet | |
| [ 0.074097] pnp: PnP ACPI init | |
| [ 0.074113] ACPI: bus type PNP registered | |
| [ 0.074194] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved | |
| [ 0.074197] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved | |
| [ 0.074201] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) | |
| [ 0.074245] pnp 00:01: [dma 4] | |
| [ 0.074260] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) | |
| [ 0.074294] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) | |
| [ 0.074315] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) | |
| [ 0.074340] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) | |
| [ 0.074519] pnp 00:05: [dma 0 disabled] | |
| [ 0.074567] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) | |
| [ 0.074897] pnp 00:06: [dma 0 disabled] | |
| [ 0.074973] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) | |
| [ 0.075024] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) | |
| [ 0.075125] system 00:08: [io 0x0a00-0x0a0f] has been reserved | |
| [ 0.075128] system 00:08: [io 0x0a00-0x0a0f] has been reserved | |
| [ 0.075131] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| [ 0.075258] system 00:09: [io 0x04d0-0x04d1] has been reserved | |
| [ 0.075261] system 00:09: [io 0x0800-0x087f] could not be reserved | |
| [ 0.075263] system 00:09: [io 0x0480-0x04bf] has been reserved | |
| [ 0.075265] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved | |
| [ 0.075267] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved | |
| [ 0.075270] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved | |
| [ 0.075272] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| [ 0.075327] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) | |
| [ 0.075380] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active) | |
| [ 0.075430] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved | |
| [ 0.075433] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| [ 0.075510] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved | |
| [ 0.075512] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved | |
| [ 0.075515] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| [ 0.075565] system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved | |
| [ 0.075568] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| [ 0.075707] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved | |
| [ 0.075709] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved | |
| [ 0.075711] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved | |
| [ 0.075714] system 00:0f: [mem 0x00100000-0xdddfffff] could not be reserved | |
| [ 0.075716] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved | |
| [ 0.075718] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) | |
| [ 0.075819] pnp: PnP ACPI: found 16 devices | |
| [ 0.075820] ACPI: bus type PNP unregistered | |
| [ 0.082105] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 | |
| [ 0.082109] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 | |
| [ 0.082111] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 | |
| [ 0.082125] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment | |
| [ 0.082131] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 | |
| [ 0.082133] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 | |
| [ 0.082135] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 | |
| [ 0.082142] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff] | |
| [ 0.082146] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref] | |
| [ 0.082149] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] | |
| [ 0.082152] pci 0000:00:1c.0: PCI bridge to [bus 03] | |
| [ 0.082154] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] | |
| [ 0.082159] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff] | |
| [ 0.082162] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref] | |
| [ 0.082167] pci 0000:00:1c.1: PCI bridge to [bus 02] | |
| [ 0.082170] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] | |
| [ 0.082174] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] | |
| [ 0.082178] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] | |
| [ 0.082183] pci 0000:00:1e.0: PCI bridge to [bus 01] | |
| [ 0.082193] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] | |
| [ 0.082195] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] | |
| [ 0.082196] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] | |
| [ 0.082198] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] | |
| [ 0.082200] pci_bus 0000:00: resource 8 [mem 0xdde00000-0xefffffff] | |
| [ 0.082202] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xfed8ffff] | |
| [ 0.082204] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] | |
| [ 0.082206] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf41fffff] | |
| [ 0.082207] pci_bus 0000:03: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref] | |
| [ 0.082209] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] | |
| [ 0.082211] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] | |
| [ 0.082213] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] | |
| [ 0.082215] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] | |
| [ 0.082217] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] | |
| [ 0.082219] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] | |
| [ 0.082221] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] | |
| [ 0.082222] pci_bus 0000:01: resource 8 [mem 0xdde00000-0xefffffff] | |
| [ 0.082224] pci_bus 0000:01: resource 9 [mem 0xf4000000-0xfed8ffff] | |
| [ 0.082256] NET: Registered protocol family 2 | |
| [ 0.082412] TCP established hash table entries: 32768 (order: 6, 262144 bytes) | |
| [ 0.082553] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) | |
| [ 0.082748] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.082794] TCP: reno registered | |
| [ 0.082802] UDP hash table entries: 2048 (order: 4, 65536 bytes) | |
| [ 0.082832] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) | |
| [ 0.082909] NET: Registered protocol family 1 | |
| [ 0.082926] pci 0000:00:02.0: Boot video device | |
| [ 0.083478] PCI: CLS 32 bytes, default 64 | |
| [ 0.083537] Unpacking initramfs... | |
| [ 0.357860] Freeing initrd memory: 17432k freed | |
| [ 0.365621] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
| [ 0.365628] software IO TLB [mem 0xd9da0000-0xddda0000] (64MB) mapped at [ffff8800d9da0000-ffff8800ddd9ffff] | |
| [ 0.365997] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa0b | |
| [ 0.366018] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa0b | |
| [ 0.366055] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba | |
| [ 0.366311] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| [ 0.366350] Initialise system trusted keyring | |
| [ 0.366402] audit: initializing netlink socket (disabled) | |
| [ 0.366418] type=2000 audit(1431571150.365:1): initialized | |
| [ 0.388418] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| [ 0.389512] zbud: loaded | |
| [ 0.389641] VFS: Disk quotas dquot_6.5.2 | |
| [ 0.389676] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.389851] msgmni has been set to 7833 | |
| [ 0.389902] Key type big_key registered | |
| [ 0.389905] SELinux: Registering netfilter hooks | |
| [ 0.390485] alg: No test for stdrng (krng) | |
| [ 0.390494] NET: Registered protocol family 38 | |
| [ 0.390500] Key type asymmetric registered | |
| [ 0.390503] Asymmetric key parser 'x509' registered | |
| [ 0.390533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) | |
| [ 0.390563] io scheduler noop registered | |
| [ 0.390566] io scheduler deadline registered (default) | |
| [ 0.390587] io scheduler cfq registered | |
| [ 0.390671] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) | |
| [ 0.390773] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X | |
| [ 0.390893] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X | |
| [ 0.390968] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
| [ 0.390982] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 | |
| [ 0.391053] intel_idle: does not run on family 6 model 23 | |
| [ 0.391123] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 | |
| [ 0.391127] ACPI: Power Button [PWRB] | |
| [ 0.391157] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 | |
| [ 0.391159] ACPI: Power Button [PWRF] | |
| [ 0.391214] ACPI: Requesting acpi_cpufreq | |
| [ 0.392329] Monitor-Mwait will be used to enter C-1 state | |
| [ 0.392339] Monitor-Mwait will be used to enter C-2 state | |
| [ 0.392344] tsc: Marking TSC unstable due to TSC halts in idle | |
| [ 0.392350] ACPI: acpi_idle registered with cpuidle | |
| [ 0.392756] GHES: HEST is not enabled! | |
| [ 0.392827] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.413333] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| [ 0.413754] Non-volatile memory driver v1.3 | |
| [ 0.413757] Linux agpgart interface v0.103 | |
| [ 0.413819] agpgart-intel 0000:00:00.0: Intel G41 Chipset | |
| [ 0.413856] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable | |
| [ 0.414375] agpgart-intel 0000:00:00.0: detected 32768K stolen memory | |
| [ 0.414494] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 | |
| [ 0.414573] crash memory driver: version 1.1 | |
| [ 0.414601] rdac: device handler registered | |
| [ 0.414650] hp_sw: device handler registered | |
| [ 0.414653] emc: device handler registered | |
| [ 0.414656] alua: device handler registered | |
| [ 0.414693] libphy: Fixed MDIO Bus: probed | |
| [ 0.414740] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 0.414744] ehci-pci: EHCI PCI platform driver | |
| [ 0.414855] ehci-pci 0000:00:1d.7: EHCI Host Controller | |
| [ 0.414892] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 | |
| [ 0.414904] ehci-pci 0000:00:1d.7: debug port 1 | |
| [ 0.418804] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported | |
| [ 0.418824] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaffc00 | |
| [ 0.424021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 | |
| [ 0.424095] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| [ 0.424100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.424105] usb usb1: Product: EHCI Host Controller | |
| [ 0.424109] usb usb1: Manufacturer: Linux 3.10.0-229.4.2.el7.x86_64 ehci_hcd | |
| [ 0.424113] usb usb1: SerialNumber: 0000:00:1d.7 | |
| [ 0.424242] hub 1-0:1.0: USB hub found | |
| [ 0.424249] hub 1-0:1.0: 8 ports detected | |
| [ 0.424371] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 0.424376] ohci-pci: OHCI PCI platform driver | |
| [ 0.424386] uhci_hcd: USB Universal Host Controller Interface driver | |
| [ 0.424453] uhci_hcd 0000:00:1d.0: UHCI Host Controller | |
| [ 0.424487] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 | |
| [ 0.424493] uhci_hcd 0000:00:1d.0: detected 2 ports | |
| [ 0.424511] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880 | |
| [ 0.424555] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 0.424557] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.424559] usb usb2: Product: UHCI Host Controller | |
| [ 0.424561] usb usb2: Manufacturer: Linux 3.10.0-229.4.2.el7.x86_64 uhci_hcd | |
| [ 0.424562] usb usb2: SerialNumber: 0000:00:1d.0 | |
| [ 0.424637] hub 2-0:1.0: USB hub found | |
| [ 0.424644] hub 2-0:1.0: 2 ports detected | |
| [ 0.424754] uhci_hcd 0000:00:1d.1: UHCI Host Controller | |
| [ 0.424788] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 | |
| [ 0.424793] uhci_hcd 0000:00:1d.1: detected 2 ports | |
| [ 0.424818] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00 | |
| [ 0.424857] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 0.424859] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.424861] usb usb3: Product: UHCI Host Controller | |
| [ 0.424863] usb usb3: Manufacturer: Linux 3.10.0-229.4.2.el7.x86_64 uhci_hcd | |
| [ 0.424864] usb usb3: SerialNumber: 0000:00:1d.1 | |
| [ 0.424930] hub 3-0:1.0: USB hub found | |
| [ 0.424936] hub 3-0:1.0: 2 ports detected | |
| [ 0.425072] uhci_hcd 0000:00:1d.2: UHCI Host Controller | |
| [ 0.425105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 | |
| [ 0.425111] uhci_hcd 0000:00:1d.2: detected 2 ports | |
| [ 0.425135] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000 | |
| [ 0.425174] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 0.425176] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.425177] usb usb4: Product: UHCI Host Controller | |
| [ 0.425179] usb usb4: Manufacturer: Linux 3.10.0-229.4.2.el7.x86_64 uhci_hcd | |
| [ 0.425181] usb usb4: SerialNumber: 0000:00:1d.2 | |
| [ 0.425250] hub 4-0:1.0: USB hub found | |
| [ 0.425257] hub 4-0:1.0: 2 ports detected | |
| [ 0.425370] uhci_hcd 0000:00:1d.3: UHCI Host Controller | |
| [ 0.425410] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 | |
| [ 0.425416] uhci_hcd 0000:00:1d.3: detected 2 ports | |
| [ 0.425440] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d080 | |
| [ 0.425482] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 | |
| [ 0.425484] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.425486] usb usb5: Product: UHCI Host Controller | |
| [ 0.425488] usb usb5: Manufacturer: Linux 3.10.0-229.4.2.el7.x86_64 uhci_hcd | |
| [ 0.425490] usb usb5: SerialNumber: 0000:00:1d.3 | |
| [ 0.425560] hub 5-0:1.0: USB hub found | |
| [ 0.425565] hub 5-0:1.0: 2 ports detected | |
| [ 0.425675] usbcore: registered new interface driver usbserial | |
| [ 0.425681] usbcore: registered new interface driver usbserial_generic | |
| [ 0.425689] usbserial: USB Serial support registered for generic | |
| [ 0.425722] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 | |
| [ 0.425724] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp | |
| [ 0.426419] serio: i8042 KBD port at 0x60,0x64 irq 1 | |
| [ 0.426483] mousedev: PS/2 mouse device common for all mice | |
| [ 0.426631] rtc_cmos 00:02: RTC can wake from S4 | |
| [ 0.426743] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 | |
| [ 0.426766] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs | |
| [ 0.426842] cpuidle: using governor menu | |
| [ 0.426982] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 0.427077] usbcore: registered new interface driver usbhid | |
| [ 0.427078] usbhid: USB HID core driver | |
| [ 0.427138] drop_monitor: Initializing network drop monitor service | |
| [ 0.427214] TCP: cubic registered | |
| [ 0.427218] Initializing XFRM netlink socket | |
| [ 0.427294] NET: Registered protocol family 10 | |
| [ 0.427436] NET: Registered protocol family 17 | |
| [ 0.427660] Loading compiled-in X.509 certificates | |
| [ 0.427681] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717' | |
| [ 0.427699] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b' | |
| [ 0.428286] Loaded X.509 cert 'CentOS Linux kernel signing key: 59445632185e5a18d98cc70f8093293509770427' | |
| [ 0.428307] registered taskstats version 1 | |
| [ 0.430284] Key type trusted registered | |
| [ 0.432123] Key type encrypted registered | |
| [ 0.433838] IMA: No TPM chip found, activating TPM-bypass! | |
| [ 0.434139] rtc_cmos 00:02: setting system clock to 2015-05-14 02:39:10 UTC (1431571150) | |
| [ 0.435125] Freeing unused kernel memory: 1604k freed | |
| [ 0.438305] systemd[1]: Unknown kernel switch systemd.debug. Ignoring. | |
| [ 0.438311] systemd[1]: Supported kernel switches: | |
| [ 0.438313] systemd[1]: systemd.unit=UNIT Default unit to start | |
| [ 0.438315] systemd[1]: rd.systemd.unit=UNIT Default unit to start when run in initrd | |
| [ 0.438317] systemd[1]: systemd.dump_core=0|1 Dump core on crash | |
| [ 0.438319] systemd[1]: systemd.crash_shell=0|1 Run shell on crash | |
| [ 0.438322] systemd[1]: systemd.crash_chvt=N Change to VT #N on crash | |
| [ 0.438324] systemd[1]: systemd.confirm_spawn=0|1 Confirm every process spawn | |
| [ 0.438326] systemd[1]: systemd.show_status=0|1 Show status updates on the console during bootup | |
| [ 0.438328] systemd[1]: systemd.log_target=console|kmsg|journal|journal-or-kmsg|syslog|syslog-or-kmsg|null | |
| [ 0.438330] systemd[1]: Log target | |
| [ 0.438332] systemd[1]: systemd.log_level=LEVEL Log level | |
| [ 0.438334] systemd[1]: systemd.log_color=0|1 Highlight important log messages | |
| [ 0.438336] systemd[1]: systemd.log_location=0|1 Include code location in log messages | |
| [ 0.438338] systemd[1]: systemd.default_standard_output=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console | |
| [ 0.438341] systemd[1]: Set default log output for services | |
| [ 0.438343] systemd[1]: systemd.default_standard_error=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console | |
| [ 0.438345] systemd[1]: Set default log error output for services | |
| [ 0.438347] systemd[1]: systemd.setenv=ASSIGNMENT Set an environment variable for all spawned processes | |
| [ 0.439012] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) | |
| [ 0.439158] systemd[1]: Running in initial RAM disk. | |
| [ 0.439214] systemd[1]: Set hostname to <iworks.viaout.is.s.u-tokyo.ac.jp>. | |
| [ 0.448326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 | |
| [ 0.469956] systemd[1]: Expecting device dev-mapper-centos_iworks\x2droot.device... | |
| [ 0.469970] systemd[1]: Starting -.slice. | |
| [ 0.470139] systemd[1]: Created slice -.slice. | |
| [ 0.470178] systemd[1]: Starting System Slice. | |
| [ 0.470259] systemd[1]: Created slice System Slice. | |
| [ 0.470291] systemd[1]: Starting Slices. | |
| [ 0.470301] systemd[1]: Reached target Slices. | |
| [ 0.470330] systemd[1]: Starting Timers. | |
| [ 0.470340] systemd[1]: Reached target Timers. | |
| [ 0.470370] systemd[1]: Starting Journal Socket. | |
| [ 0.470432] systemd[1]: Listening on Journal Socket. | |
| [ 0.470506] systemd[1]: Started dracut ask for additional cmdline parameters. | |
| [ 0.470656] systemd[1]: Starting dracut cmdline hook... | |
| [ 0.471178] systemd[1]: Started Load Kernel Modules. | |
| [ 0.471199] systemd[1]: Starting Setup Virtual Console... | |
| [ 0.471571] systemd[1]: Starting Journal Service... | |
| [ 0.472046] systemd[1]: Started Journal Service. | |
| [ 0.613149] device-mapper: uevent: version 1.0.3 | |
| [ 0.613220] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com | |
| [ 0.638550] systemd-udevd[246]: starting version 208 | |
| [ 0.684377] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded | |
| [ 0.684388] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control | |
| [ 0.684596] r8169 0000:02:00.0: irq 42 for MSI/MSI-X | |
| [ 0.684750] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc9000067a000, xx:xx:xx:xx:xx:xx, XID 1c4000c0 IRQ 42 | |
| [ 0.684753] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] | |
| [ 0.701495] [drm] Initialized drm 1.1.0 20060810 | |
| [ 0.702047] libata version 3.00 loaded. | |
| [ 0.704367] ata_piix 0000:00:1f.1: version 2.13 | |
| [ 0.722539] scsi host0: ata_piix | |
| [ 0.730036] scsi host1: ata_piix | |
| [ 0.730104] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 | |
| [ 0.730107] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 | |
| [ 0.730224] ata_piix 0000:00:1f.2: MAP [ | |
| [ 0.730225] P0 P2 P1 P3 ] | |
| [ 0.731389] ata1: port disabled--ignoring | |
| [ 0.731422] ata2: port disabled--ignoring | |
| [ 0.742075] scsi host2: ata_piix | |
| [ 0.746522] scsi host3: ata_piix | |
| [ 0.746586] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 20 | |
| [ 0.746588] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 20 | |
| [ 0.756144] systemd-udevd[252]: renamed network interface eth0 to enp2s0 | |
| [ 0.759497] [drm] Memory usable by graphics device = 2048M | |
| [ 0.759502] [drm] Replacing VGA console driver | |
| [ 0.760232] Console: switching to colour dummy device 80x25 | |
| [ 0.783048] i915 0000:00:02.0: irq 43 for MSI/MSI-X | |
| [ 0.783056] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 0.783057] [drm] Driver supports precise vblank timestamp query. | |
| [ 0.783112] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem | |
| [ 0.838626] fbcon: inteldrmfb (fb0) is primary device | |
| [ 0.858038] Console: switching to colour frame buffer device 160x64 | |
| [ 0.860995] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device | |
| [ 0.860997] i915 0000:00:02.0: registered panic notifier | |
| [ 0.861106] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 | |
| [ 0.897175] ata4.01: NODEV after polling detection | |
| [ 0.909342] ata3.00: ATA-8: Hitachi HDS721032CLA362, JPFOA3EA, max UDMA/133 | |
| [ 0.909348] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) | |
| [ 0.915329] ata3.00: configured for UDMA/133 | |
| [ 0.915442] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72103 JPFO PQ: 0 ANSI: 5 | |
| [ 0.916143] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100 | |
| [ 0.922226] ata4.00: configured for UDMA/100 | |
| [ 0.930810] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5 | |
| [ 0.952158] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) | |
| [ 0.952205] sd 2:0:0:0: [sda] Write Protect is off | |
| [ 0.952207] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
| [ 0.952227] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| [ 0.954070] sda: sda1 sda2 | |
| [ 0.954293] sd 2:0:0:0: [sda] Attached SCSI disk | |
| [ 0.966788] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray | |
| [ 0.966791] cdrom: Uniform CD-ROM driver Revision: 3.20 | |
| [ 0.966873] sr 3:0:0:0: Attached scsi CD-ROM sr0 | |
| [ 1.771951] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled | |
| [ 1.773630] XFS (dm-0): Mounting V4 Filesystem | |
| [ 1.965505] XFS (dm-0): Ending clean mount | |
| [ 2.210343] systemd-journald[95]: Received SIGTERM | |
| [ 2.733920] SELinux: Disabled at runtime. | |
| [ 2.733942] SELinux: Unregistering netfilter hooks | |
| [ 2.754055] type=1404 audit(1431571152.818:2): selinux=0 auid=4294967295 ses=4294967295 | |
| [ 2.855325] systemd[1]: Unknown kernel switch systemd.debug. Ignoring. | |
| [ 2.855334] systemd[1]: Supported kernel switches: | |
| [ 2.855340] systemd[1]: systemd.unit=UNIT Default unit to start | |
| [ 2.855345] systemd[1]: rd.systemd.unit=UNIT Default unit to start when run in initrd | |
| [ 2.855350] systemd[1]: systemd.dump_core=0|1 Dump core on crash | |
| [ 2.855355] systemd[1]: systemd.crash_shell=0|1 Run shell on crash | |
| [ 2.855360] systemd[1]: systemd.crash_chvt=N Change to VT #N on crash | |
| [ 2.855364] systemd[1]: systemd.confirm_spawn=0|1 Confirm every process spawn | |
| [ 2.855369] systemd[1]: systemd.show_status=0|1 Show status updates on the console during bootup | |
| [ 2.855374] systemd[1]: systemd.log_target=console|kmsg|journal|journal-or-kmsg|syslog|syslog-or-kmsg|null | |
| [ 2.855379] systemd[1]: Log target | |
| [ 2.855384] systemd[1]: systemd.log_level=LEVEL Log level | |
| [ 2.855388] systemd[1]: systemd.log_color=0|1 Highlight important log messages | |
| [ 2.855393] systemd[1]: systemd.log_location=0|1 Include code location in log messages | |
| [ 2.855398] systemd[1]: systemd.default_standard_output=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console | |
| [ 2.855403] systemd[1]: Set default log output for services | |
| [ 2.855408] systemd[1]: systemd.default_standard_error=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console | |
| [ 2.855413] systemd[1]: Set default log error output for services | |
| [ 2.855418] systemd[1]: systemd.setenv=ASSIGNMENT Set an environment variable for all spawned processes | |
| [ 5.167510] systemd-udevd[483]: starting version 208 | |
| [ 6.617321] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| [ 7.126425] input: PC Speaker as /devices/platform/pcspkr/input/input3 | |
| [ 7.168471] parport_pc 00:06: reported by Plug and Play ACPI | |
| [ 7.168517] parport0: PC-style at 0x378, irq 7 [PCSPP] | |
| [ 7.369798] intel_rng: FWH not detected | |
| [ 7.375230] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt | |
| [ 7.425875] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20130517/utaddress-254) | |
| [ 7.425882] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver | |
| [ 7.425900] lpc_ich: Resource conflict(s) found affecting gpio_ich | |
| [ 7.455104] ppdev: user-space parallel port driver | |
| [ 7.813355] leds_ss4200: no LED devices found | |
| [ 7.962580] iTCO_vendor_support: vendor-support=0 | |
| [ 7.986583] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 | |
| [ 7.986617] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) | |
| [ 7.986739] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | |
| [ 8.971336] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X | |
| [ 9.124698] Adding 4063228k swap on /dev/mapper/centos_iworks-swap. Priority:-1 extents:1 across:4063228k FS | |
| [ 9.163520] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line | |
| [ 9.163525] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) | |
| [ 9.163526] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) | |
| [ 9.163528] sound hdaudioC0D0: mono: mono_out=0x0 | |
| [ 9.163530] sound hdaudioC0D0: dig-out=0x1e/0x0 | |
| [ 9.163531] sound hdaudioC0D0: inputs: | |
| [ 9.163534] sound hdaudioC0D0: Front Mic=0x19 | |
| [ 9.163536] sound hdaudioC0D0: Rear Mic=0x18 | |
| [ 9.163537] sound hdaudioC0D0: Line=0x1a | |
| [ 9.172650] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 | |
| [ 9.172704] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 | |
| [ 9.172753] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 | |
| [ 9.172799] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 | |
| [ 9.172852] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 | |
| [ 9.622678] XFS (sda1): Mounting V4 Filesystem | |
| [ 10.152053] floppy0: no floppy controllers found | |
| [ 11.081305] XFS (dm-2): Mounting V4 Filesystem | |
| [ 11.608189] XFS (dm-2): Ending clean mount | |
| [ 17.455780] XFS (sda1): Ending clean mount | |
| [ 17.468146] systemd-journald[465]: Received request to flush runtime journal from PID 1 | |
| [ 17.593788] type=1305 audit(1431571167.658:3): audit_pid=568 old=0 auid=4294967295 ses=4294967295 res=1 | |
| [ 19.719265] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 19.809451] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
| [ 19.895800] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 19.960040] Ebtables v2.0 registered | |
| [ 20.007134] Bridge firewalling registered | |
| [ 20.382810] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready | |
| [ 20.388335] r8169 0000:02:00.0 enp2s0: link down | |
| [ 20.388345] r8169 0000:02:00.0 enp2s0: link down | |
| [ 20.388545] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready | |
| [ 22.458776] r8169 0000:02:00.0 enp2s0: link up | |
| [ 22.458790] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready | |
| [ 34.969011] Adjusting hpet more than 11% (2611926790 vs 2601267907) | |
| [ 1099.742974] perf interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 | |
| [89080.731942] perf interrupt took too long (5007 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment